Commit Graph

217 Commits

Author SHA1 Message Date
lean
db50d6e23f ipq806x: remove 5.10 patches 2022-03-16 01:50:37 +08:00
John Audia
2f2e7bec8e kernel: bump 5.10 to 5.10.102
Removed upstreamed:
	bcm4908/patches-5.10/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch[1]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.102&id=f333c1916fd6b55900029bf8f918cc00009e2111

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <graysky@archlinux.us>
2022-03-02 16:22:07 +00:00
John Audia
fbd027c5da kernel: bump 5.10 to 5.10.101
Removed upstreamed:
  pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1]
  bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <graysky@archlinux.us>
2022-03-02 16:21:51 +00:00
lean
a30eae452e ipq806x: enable NSS Multicast Snooping Support 2022-02-16 17:39:01 +08:00
AmadeusGhost
aafe115cda
ipq806x: add support for SURF G-NAT200 (#8810)
Hardware specs:
  SoC: Qualcomm IPQ8064
  RAM: 1GB DDR3
  SPI: 32MB S25FL256S
  NAND: 512MB S34MS04G2 (unused)
  Ethernet: 5x 10/100/1000 Mbps QCA8337
  LED: internet, usb, sata
  Button: Reset
  USB: 1 x 3.0

Installation:
  Interrupt U-Boot, tftpboot initramfs image,
  than sysupgrade to openwrt.

Signed-off-by: AmadeusGhost <amadeus@openjmu.xyz>
2022-02-11 15:07:09 +08:00
Shane Synan
be692b5939 ipq806x: revert SDC clock changes for NBG6817 MMC
Revert the SDC "CLK_SET_RATE_GATE" changes to the SDC clock regulator
structures.

See https://elinux.org/images/b/b8/Elc2013_Clement.pdf
> if ((clk->flags & CLK_SET_RATE_GATE) && clk->prepare_count) {
>
> For this particular clock, setting its rate is possible only if the
> clock is ungated (not yet prepared)

This fixes the MMC failing to initialize on newer ZyXEL NBG6817
hardware revisions with Kingston MMC.  Older revisions should
hopefully be unaffected.

Check MMC hardware details with:
cd /sys/block/mmcblk0/device/ && \
  tail -v cid date name manfid fwrev hwrev oemid rev

Known problematic MMC names (broken before this commit):
* M62704 (dated 12/2018) via myself
* M62704 (dated 11/2018) via Drake Stefani

Known unaffected MMC names (already working without this commit):
* S10004 (dated 12/2015) via slh

Now, the MMC properly initializes and later switches to high speed.

Thanks to:
* Ansuel for maintaining/help with the IPQ806x platform, kernel code
* slh for additional debugging and suggestions
* dwfreed for confirming newer MMC details, clock frequency
* robimarko for device driver debug printing help, clock debugging
* Drake for testing and confirmation with their own newer NBG6817
...and anyone else I missed!

Signed-off-by: Shane Synan <digitalcircuit36939@gmail.com>
Tested-by: Shane Synan <digitalcircuit36939@gmail.com>
2021-12-16 09:22:06 +08:00
AmadeusGhost
5c40fcd80e ipq806x: update some script paths 2021-12-09 10:25:20 +08:00
Beginner
0cd887f7b5
kernel: bump 5.10 to 5.10.83 (#8374)
Removed upstreamed:
    bcm53xx/patches-5.10/033-v5.16-0024-ARM-dts-BCM5301X-Fix-I2C-controller-interrupt.patch[1]
    bcm53xx/patches-5.10/033-v5.16-0025-ARM-dts-BCM5301X-Add-interrupt-properties-to-GPIO-no.patch[2]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=b2cd6fdcbe0a5cb44e4610a08cc58261d494a885
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=9db1d4a3c2700e1cc84c3d61199411d75c2a3ec6

Build system: x86_64*
Build-tested: bcm2711/RPi4B, ipq806x/R7800†
Run-tested: bcm2711/RPi4B, ipq806x/R7800†

* Had to revert 7c99085bd69742f66207d61e9f2da5ec4f8f9d2f in order to build
  (latest bump of ca-certificates)

† Had to revert 7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build
  (binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149)

Signed-off-by: graysky <graysky@archlinux.us>

Co-authored-by: graysky <graysky@archlinux.us>
2021-12-03 12:10:21 +08:00
Hugo Yuan
5efd70f89f
ipq806x: Add Norton 518 support (#8330) 2021-11-27 18:15:26 +08:00
Beginner
31fc43272d
kernel: bump 5.10 to 5.10.82 (#8303)
* kernel: bump 5.10 to 5.10.81

Manually rebased:
    octeontx/patches-5.10/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch

All other patches automatically rebased.

Signed-off-by: John Audia <graysky@archlinux.us>

Build system: x86_64
Build-tested: bcm2711/RPi4B, ipq806x/R7800
Run-tested: bcm2711/RPi4B, ipq806x/R7800

* kernel: bump 5.10 to 5.10.82

Removed upstreamed:
    bcm53xx/patches-5.10/033-v5.16-0014-ARM-dts-NSP-Fix-mpcore-mmc-node-names.patch

Manually rebased:
    ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch

All other patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B
Run-tested: bcm2711/RPi4B

Signed-off-by: John Audia <graysky@archlinux.us>

Co-authored-by: John Audia <graysky@archlinux.us>
2021-11-27 03:02:35 +08:00
Hugo Yuan
19a764717d
ipq806x: fix compile error (#8311) 2021-11-26 07:11:53 +08:00
Beginner
56de0725a4
kernel: bump 5.10 to 5.10.80 (#8280)
Deleted (upstreamed):
ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch [1]
bcm53xx/patches-5.10/033-v5.15-0012-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch [2]
lantiq/patches-5.10/0016-mtd-rawnand-xway-Keep-the-driver-compatible-with-on-.patch [3]
lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch [4]
lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch [5]
lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch [6]

Manually rebased:
ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=47462c5e600fbaffd755cd13dedd80d04e41ff83
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=2fde76df1885a6bec04317e457121326070450eb
[3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=9b366f5221d8aa64b22f35be137a5749326444ce
[4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=5af57ce8a6155fe3e4270d28d171abf8903bebc0
[5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=b92a5df2c7adc79a57481445f67de0c1c716581f
[6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=6b72caabc47011d03f44064452b2c65e8ed18326

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

Co-authored-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-11-20 01:41:26 +08:00
Beginner
047c7ec182
kernel: bump 5.10 to 5.10.76 (#8136)
Deleted (upstreamed):
bcm27xx/patches-5.10/950-0145-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch [1]

Manually rebased:
bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch
bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch

Note: although automatically rebaseable, the last patch has been edited to avoid
conflicting bit definitions.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=b6f32897af190d4716412e156ee0abcc16e4f1e5

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

Co-authored-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-10-31 16:27:59 +08:00
AmadeusGhost
1c6254d794 Revert "ipq806x: skip MTDBLOCK error to speedup booting time by 5x"
This reverts commit 56e6c4b866.
Fixes: #7927
2021-10-08 11:31:03 +08:00
Beginner
a9c5c7aa6b
kernel: bump 5.10 to 5.10.70 (#7976)
* kernel: bump 5.10 to 5.10.65

Manually refreshed:
generic/pending-5.10/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
bcm27xx/patches-5.10/950-0053-firmware-bcm2835-Support-ARCH_BCM270x.patch
bcm27xx/patches-5.10/950-0087-firmware-raspberrypi-Add-backward-compatible-get_thr.patch

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

* kernel: bump 5.10 to 5.10.66

No patches refreshed.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

* kernel: bump 5.10 to 5.10.67

Deleted (upstreamed):
bcm27xx/patches-5.10/950-0312-vc4_hdmi-Set-HD_CTL_WHOLSMP-and-HD_CTL_CHALIGN_SET.patch

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

* kernel: bump 5.10 to 5.10.68

Deleted (upstreamed):
generic/backport-5.10/610-v5.13-02-netfilter-Fix-fall-through-warnings-for-Clang.patch
generic/backport-5.10/792-v5.15-0001-net-dsa-b53-Fix-calculating-number-of-switch-ports.patch
generic/backport-5.10/792-v5.15-0002-net-dsa-b53-Set-correct-number-of-ports-in-the-DSA-s.patch
generic/backport-5.10/792-v5.15-0003-net-dsa-b53-Fix-IMP-port-setup-on-BCM5301x.patch
generic/backport-5.10/840-0001-PCI-of-Don-t-fail-devm_pci_alloc_host_bridge-on-miss.patch
generic/backport-5.10/840-0002-PCI-iproc-Fix-BCMA-probe-resource-handling.patch
generic/pending-5.10/498-mtd-mtdconcat-select-readwrite-function.patch

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

* kernel: bump 5.10 to 5.10.69

Patches automatically refreshed.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

* kernel: bump 5.10 to 5.10.70

Deleted (upstreamed):
bcm53xx/patches-5.10/181-Revert-USB-bcma-Add-a-check-for-devm_gpiod_get.patch

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

Co-authored-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-10-04 22:25:52 +08:00
Beginner
3a5b730796
kernel: bump 5.4 to 5.4.150 (#7981)
Manually rebased:
  generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
  mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch

Removed upstreamed:
  layerscape/patches-5.4/819-uart-0004-MLK-18137-fsl_lpuart-Fix-loopback-mode.patch

All others updated automatically.

Compile-tested on: lantiq/xrx200, armvirt/64
Runtime-tested on: lantiq/xrx200, armvirt/64

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-10-03 10:04:41 +08:00
coolsnowwolf
56e6c4b866 ipq806x: skip MTDBLOCK error to speedup booting time by 5x 2021-09-18 00:32:44 +08:00
AmadeusGhost
f27a1742d6
ipq806x: add support for Arris RAC2V1A (#7680)
This commit add support for Arris RAC2V1A (aka TR4400-AC).

Hardware specs:
  SoC: Qualcomm IPQ8065
  RAM: 256 MB DDR3
  Flash: 512 MB NAND
  WiFi1: Qualcomm QCA9983 2.4 GHz
  WiFi2: Qualcomm QCA9984 5 GHz
  Ethernet1: AR8033 PHY -> Wan
  Ethernet2: QCA8337 Switch -> Lan 1~4
  LED: Status (red / blue)
  USB: 1x USB 3.0 Type-A
  Button: Reset, WPS
  Power: DC 12V,2.5A

Installation:
  Interrupt U-Boot, tftpboot initramfs image,
  than sysupgrade to openwrt.

Very thanks for asushugo's help.

Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn>
2021-08-20 01:36:28 +08:00
AmadeusGhost
129bfbf305
ipq806x: add support for askey rt4230w 256m nand version (#7595)
The difference between flashing:
  Interrupt U-Boot and run these commands:

  setenv bootcmd "setenv mtdids nand0=nand0 && set mtdparts
  mtdparts=nand0:0xDC00000@0x2400000(firmware) && ubi part firmware &&
  ubi read 0x44000000 kernel 0x6e0000 && bootm"
  saveenv
2021-08-06 18:07:10 +08:00
coolsnowwolf
ff042839f3 ipq806x: fix boot pages ecc I/O error cause booting slow issue 2021-07-31 17:09:57 +08:00
coolsnowwolf
8e247edca9 ipq806x: fix E8350 web upgrade again 2021-07-31 16:49:38 +08:00
coolsnowwolf
0c928423f6 Revert "iwinfo: bump version"
This reverts commit 8c55064b3a.
2021-07-31 16:48:06 +08:00
coolsnowwolf
8c55064b3a iwinfo: bump version 2021-07-30 15:13:53 +08:00
AmadeusGhost
9f569564f3
ipq806x: rt4230w: import some fixes from upstream pr (#7530)
Signed-off-by: AmadeusGhost <amadeus@openjmu.xyz>
2021-07-26 18:09:50 +08:00
coolsnowwolf
b517f4f273 ipq806x: resize D7800 ubi partition 2021-07-25 18:22:21 +08:00
coolsnowwolf
3977f16214 ipq807x: add autocore-arm and some packages to target 2021-07-25 17:53:08 +08:00
coolsnowwolf
1c3806e11f
Update qcom-ipq8065-rt4230w-rev6.dts 2021-07-25 13:38:42 +08:00
coolsnowwolf
c366b45ec9 ipq806x: fix Linksys E8350 web sysupgrade 2021-07-24 22:45:08 +08:00
coolsnowwolf
6a18e18416 ipq806x: add quantenna 5G wifi support for E8350/R7500v1 2021-07-23 16:59:44 +08:00
coolsnowwolf
0551b74b0a ipq806x: scaling mini freq set to 600mhz 2021-07-23 13:00:36 +08:00
coolsnowwolf
47cdbf28f5 ipq806x: fix nss offload for Linksys E8350 2021-07-23 12:30:17 +08:00
coolsnowwolf
ecd242eddd ipq806x: fix linksys e8350 boot 2021-07-23 11:35:05 +08:00
coolsnowwolf
65068ed984 Revert "treewide: convert mtd-mac-address-increment* to generic implementation"
This reverts commit 82d9b3e2c4.
2021-07-23 00:29:52 +08:00
coolsnowwolf
82d9b3e2c4 treewide: convert mtd-mac-address-increment* to generic implementation 2021-07-23 00:20:32 +08:00
coolsnowwolf
1857399288 ipq806x: fix linksys E8350 dts 2021-07-22 18:58:43 +08:00
coolsnowwolf
39dfd98c1b ipq806x: fix Netgear D7800 ubi and RAM 2021-07-22 18:49:03 +08:00
coolsnowwolf
28c936c003 Revert "ipq806x: resize Netgear D7800 ubi and RAM"
This reverts commit d09f440991.
2021-07-22 18:42:13 +08:00
coolsnowwolf
d09f440991 ipq806x: resize Netgear D7800 ubi and RAM 2021-07-22 18:07:53 +08:00
coolsnowwolf
cda8c08d33 ipq806x: fix linksys E8350 factory header 2021-07-22 14:08:24 +08:00
coolsnowwolf
b4e219dc4b Revert "ipq806x: fix Linksys E8350 factory flash"
This reverts commit 0ac49b89de.
2021-07-22 14:01:25 +08:00
coolsnowwolf
0a7c9813a9 ipq806x: add NSS HW-accelerated QOS traffic shaping support 2021-07-22 00:22:15 +08:00
coolsnowwolf
0ac49b89de ipq806x: fix Linksys E8350 factory flash 2021-07-21 12:22:19 +08:00
coolsnowwolf
a9f078bb1a Merge branch 'master' of https://github.com/coolsnowwolf/lede 2021-07-20 20:06:43 +08:00
coolsnowwolf
112c1eee2d ipq806x: Linksys E8350 add NSS Hardware Offloading support 2021-07-20 20:06:35 +08:00
Hugo Yuan
fb430b48e7
ipq806x: RT4230W add NSS Hardware Offloading support (#7452) 2021-07-20 10:47:57 +00:00
coolsnowwolf
54efd56808 ipq806x: rezise R7500 ubi partion from 22MB to 104MB 2021-07-19 17:19:07 +08:00
coolsnowwolf
f5e7d6cec5 ipq806x: Add support for Linksys E8350 2021-07-19 09:19:48 +08:00
Hugo Yuan
25369be255
ipq806x: Rename Netgear XR500 (#7415) 2021-07-17 21:00:17 +08:00
coolsnowwolf
6a7d00deab ipq806x: add Netgear XR500 support 2021-07-17 20:25:49 +08:00
coolsnowwolf
2c6266dbf9 ipq806x: add luci-app-advanced-reboot support for EA7500 v1/EA8500 2021-07-16 18:47:43 +08:00
coolsnowwolf
ed1a6992c8 ipq806x: enable 64-bit time 2021-07-15 16:24:45 +08:00
coolsnowwolf
429c273e1b ipq806x: use schedutil governor replace of ondemand 2021-07-15 16:20:54 +08:00
coolsnowwolf
a0ffc4c4e0 ipq806x: add smallbuffers profile for EA7500 v1 2021-07-15 12:19:46 +08:00
coolsnowwolf
e9991bd82f ipq806x: fix lan nss mdio for EA7500 v1/EA8500 2021-07-15 11:58:38 +08:00
AmadeusGhost
89a8e0d652
ipq806x: fix nss frequency on ipq8062 (#7360) 2021-07-12 13:59:14 +00:00
AmadeusGhost
aa73053a71
ipq806x: re-added support for Ruijie M520 again (#7330)
Signed-off-by: AmadeusGhost <amadeus@openjmu.xyz>
2021-07-11 01:25:59 +08:00
coolsnowwolf
f99839aea2 ipq806x: add default package 2021-07-10 12:16:46 +08:00
coolsnowwolf
adf04492ee ipq806x: add NSS Hardware Offloading support 2021-07-09 17:03:34 +08:00
AmadeusGhost
70b6c02432
ipq806x: sync upstream source code (#7270)
* ipq806x: fix missing changes in 5.4 for new cpufreq implementation

The new cpufreq dedicated driver changed the node structure
on how the cache should be defined in the dts. The 5.4 dtsi addition
patch has not been updated to follow the new implementation.
Fix this to restore correct cache scaling and restore any performance
regression.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

* ipq806x: fix missing 1.4ghz cache freq for ipq8065 SoC

With the new implementation of the dedicated cpufreq driver,
the 1.4 Ghz was only dropped and not added to the ipq8065 SoC.
Fix this to improve performance.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

* ipq806x: fix dedicated cpufreq driver

2 small fix for the dedicated cpufreq driver:
- Fix index wrongly used as the current cpu
- Exit early if a bad freq is detected. In the current state the freq
is applied anyway even with invalid state.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

Co-authored-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-07-04 10:52:46 +08:00
John Audia
c3b54e78a5 ipq806x: refresh config for kernel 5.4
* With kernel 5.4.128, ran: make kernel_menuconfig CONFIG_TARGET=generic
* Manually added back CONFIG_LEDS_TRIGGER_DISK=y so as not to revert
  f93fcf8923aa ("ipq806x: enable disk-activity LED trigger")

Signed-off-by: John Audia <graysky@archlinux.us>
[minor commit title/message adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-06-29 11:14:56 +08:00
AmadeusGhost
f1d18ecb17
ipq-wifi: makefile bug fixes (#7180)
Fixes: eac26cc353
2021-06-25 04:40:12 +00:00
AmadeusGhost
87e2f29128
ipq806x: re-added support for Ruijie M520 (#7105)
Signed-off-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
2021-06-20 07:45:22 +00:00
lean
a3f1e837fd x64: fix grub2 booting 2021-06-15 17:58:07 +08:00
lean
7a50383ab6 add kernel 5.10 support and sync with upstream 2021-06-14 18:30:08 +08:00
lean
f6f590958d kernel: bump 5.4 to 5.4.120 2021-05-20 13:04:41 +08:00
lean
a10aead5be kernel: bump 5.4 to 5.4.109 2021-04-03 17:02:54 +08:00
AmadeusGhost
f06ba13bd2
kernel: bump 5.4 to 5.4.105 (#6520) 2021-03-14 11:52:33 +08:00
AmadeusGhost
c83233b052
kernel: bump 5.4 to 5.4.91 (#6225) 2021-01-21 20:51:19 +08:00
lean
28f854eb5f kernel: bump 5.4 to 5.4.86 2021-01-10 15:14:14 +08:00
AmadeusGhost
041d7abc4a
kernel: bump 5.4 to 5.4.79 and add mt7620-nand driver (#5830)
* kernel: bump 5.4 to 5.4.79

* ramips: add mt7620-nand driver for NAND flash

This add the mt7620-nand driver
and enable nand ubifs for subtarget mt7620

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>

Co-authored-by: Chen Minqiang <ptpt52@gmail.com>
2020-11-28 16:43:16 +08:00
AmadeusGhost
5d98c4178e
kernel: bump 5.4 to 5.4.75 (#5780)
[mac80211]
 5b29614 mac80211: another fix for the sta connection monitor
 1ed6eb1 mac80211: backport sched_set_fifo_low
 cba4120 mac80211: add support for specifying a per-device scan list
 e0d482f rt2x00: mt7620: differentiate based on SoC's CHIP_VER

[package]
 amd64-microcode/intel-microcode/linux-firmware: update version
2020-11-14 00:52:35 +08:00
CN_SZTL
c39177efcf
autocore: add cpu freq & temp display for some arm devices (#5657)
* autocore: add cpu freq & temp display for some arm devices

Signed-off-by: CN_SZTL <cnsztl@project-openwrt.eu.org>

Co-authored-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>

* Revert "show CPU Temperature for NanoPi R2S (#5612)"

This reverts commit 099439f051.

Co-authored-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
2020-10-13 01:07:17 +08:00
CN_SZTL
64debc95d5
kernel: bump 5.4 to 5.4.69 (#5587)
Seemingly unneeded based on new upstream code so manually deleted:
 platform/820-usb-0007-usb-dwc3-gadget-increase-timeout-value-for-send-ep-c.patch

Manually merged:
 generic-hack/251-sound_kconfig.patch

All other modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>

Co-authored-by: John Audia <graysky@archlinux.us>
2020-10-10 14:01:25 +08:00
AmadeusGhost
86bc29e4a8
kernel: bump 5.4 to 5.4.68 (#5555)
[mac80211]
 ca5ee6e mac80211: Fix potential endless loop
 2c14710 mac80211: add more AQL fixes/improvements
 91fb3ce mac80211: remove an obsolete patch that is no longer doing anything useful
 acf1733 mac80211: add preliminary support for enabling 802.11ax in config
 d717343 mac80211: update encap offload patches to the latest version
 673062f mac80211: allow bigger A-MSDU sizes in VHT, even if HT is limited
 caf7277 mac80211: do not allow bigger VHT MPDUs than the hardware supports
 cd36c0d mac80211: select the first available channel for 5GHz interfaces
 1c6d456 mac80211: fix regression in station connection monitor optimization
 4bd7689 mac80211: update sta connection monitor regression fix

[target]
 Sync: at91, ath25, ath79, lantiq, mediatek, mvebu.
2020-10-03 00:36:16 +08:00
chongshengB
88d85bb574
kernel: bump 5.4 to 5.4.61 (#5399)
Manually merged:
  backport-5.4
     011-kbuild-export-SUBARCH.patch
  layerscape
    701-net-0262-net-dsa-ocelot-add-tagger-for-Ocelot-Felix-switches.patch

All other modifications made by update_kernel.sh

Build-tested: x86/64, lantiq/xrx200, ramips/mt7621
Run-tested: ipq806x (R7800), lantiq/xrx200, x86/64, ramips (RT-AC57U)

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[minor commit message adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

Co-authored-by: John Audia <graysky@archlinux.us>
2020-09-01 17:21:00 +08:00
CN_SZTL
12d0742fd5
kernel: bump to 4.14.195, 5.4.60 (#5376)
* kernel: bump 5.4 to 5.4.60

Deleted upstream patches:
  generic:
    041-genirq-affinity-Make-affinity-setting-if-activated-o.patch
  ipq806x:
    093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch
    093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch

Merged manually:
  ipq806x:
    093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch
  layerscape:
    804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch

Build-tested: ath79/generic, ipq806x, layerscape/armv7, layerscape/armv8_64b
Run-tested: ipq806x (R7800)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

* kernel: Update kernel 4.14 to version 4.14.195

Compile and runtime tested on lantiq/xrx200 and x86/64.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Co-authored-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-30 21:16:31 +08:00
AmadeusGhost
20274fd514
ipq806x: sync official source code (#5365) 2020-08-27 15:57:30 +08:00
AmadeusGhost
404209f6c4
kernel: bump to 4.14.193, 4.19.138, 5.4.59 (#5350)
kernel: bump to 4.14.193, 4.19.138, 5.4.59 (#5350)
  431fb8c mac80211: add AQL improvements
  6bdd4c9 mac80211: add missing backports for building with 4.14 kernels
  0106820 mac80211: add missing return code checks in AQL improvements
  e7f7101 mac80211: rework encapsulation offload support

[package]
  base-files: add function for generating random MAC
  dnsmasq: abort dhcp_check on interface state
  boot: sync upstream source code
  ath10k-ct-firmware/mt76/sch_cake: update to latest git HEAD

[script]
  download: add China Mirror Station

[target]
  Sync: arc770, ath79, bcm63xx, kirkwood, lantiq, layerscape,
        mediatek, mvebu, octeon, oxnas, pistachio, uml
  Sync most of the target patches.

Run-compiled-on: ipq40xx (4.19 & 5.4), ramips
2020-08-26 11:31:50 +08:00
AmadeusGhost
46524d9336
ipq806x: sync upstream source code (#5320) 2020-08-18 01:41:42 +08:00
AmadeusGhost
e47f199950
ipq806x: add support for RuiJie RG-MTFI-M520 (#5112)
Fix startup by Mr.chilauhe.

Signed-off-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
2020-07-17 10:53:56 +08:00
coolsnowwolf
707e6ed1a1 kernel: update to 4.14.187, 4.19.131, 5.4.50 2020-07-06 10:52:50 +08:00
coolsnowwolf
33abeff31c Sync to snapshot kernel 5.4 version 2020-07-02 23:30:56 +08:00
AmadeusGhost
9448672845
kernel: bump to 4.9.219, 4.14.176, 4.19.115 (#4350)
* kernel: bump 4.14 to 4.14.176

Refreshed all patches.

Remove upstreamed:
- 0001-net-thunderx-workaround-BGX-TX-Underflow-issue.patch
- 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch
- 184-USB-serial-option-add-Wistron-Neweb-D19Q1.patch

Fixes:
- CVE-2020-8648 (potentially)
- CVE-2020-8647
- CVE-2020-8649

Compile-tested on: cns3xxx, octeontx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

* kernel: bump 4.19 to 4.19.115

Remove upstreamed:
- 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch
- 184-USB-serial-option-add-Wistron-Neweb-D19Q1.patch

Fixes:
- CVE-2020-8647
- CVE-2020-8648 (potentially)
- CVE-2020-8649

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

* kernel: bump 4.9 to 4.9.219

Refreshed all patches.

Altered patches:
- 0026-NET-multi-phy-support.patch

Fixes:
- CVE-2020-8647
- CVE-2020-8648 (Potentially)
- CVE-2020-8649

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-04-17 11:50:34 +08:00
AmadeusGhost
cc689609d6
ipq806x: 4.19: correct dts for m520 (#4330)
Signed-off-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
2020-04-16 11:28:05 +08:00
AmadeusGhost
77b85a3e18
ipq806x: add i2c chips support for m520 (#4055)
This commit enable lm75 and pcf8563 for m520.

Signed-off-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
2020-03-27 16:56:25 +08:00
AmadeusGhost
66de6c5050
luci-app-cpufreq: drop untest target (#3915)
Someone reports that it has bug in arm64
2020-03-21 22:17:09 +08:00
lean
3bef40a0cb kernel: bump to 4.14.172 / 4.19.108 2020-03-13 12:11:40 +08:00
AmadeusGhost
691def3cad
kernel: bump to 4.9.214, 4.14.171, 4.19.106 (#3375) 2020-02-29 16:28:07 +08:00
coolsnowwolf
191ace6dff Revert "kernel: bump to 4.9.214, 4.14.171, 4.19.106 (#3318)"
This reverts commit 01ab5cf3c9.
2020-02-26 16:47:18 +08:00
AmadeusGhost
01ab5cf3c9
kernel: bump to 4.9.214, 4.14.171, 4.19.106 (#3318)
* kernel: bump 4.14 to 4.14.171

Refreshed all patches.

Fixes:
- CVE-2013-1798

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

* kernel: bump 4.19 to 4.19.105

Refreshed all patches.

Fixes:
- CVE-2013-1798
- CVE-2019-3016

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

* kernel: bump 4.19 to 4.19.106

Refreshed all patches.

Remove upstreamed:
- 950-0786-leds-pca963x-Fix-open-drain-initialization.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

* kernel: bump to 4.9.214, 4.14.171, 4.19.106

Co-authored-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-02-25 12:24:44 +08:00
AmadeusGhost
464fb0c122
ipq806x: add support for ruijie_rg-mtfi-m520 (#3025)
Signed-off-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
2020-02-11 17:26:50 +08:00
AmadeusGhost
6901278ef0
kernel: bump to 4.14.169, 4.19.101 (#2963)
* kernel: bump to 4.14.169, 4.19.101

* uboot: update to latest

* mediatek: bump to v4.19

* ath79: switch to wpad

* Revert 'grub2: update to latest'
2020-02-06 21:45:40 +08:00
coolsnowwolf
ecea39f109 Revert "files: sync from openwrt v19.07 (#2690)"
This reverts commit 2289184a62.
2020-02-03 12:33:25 +08:00
AmadeusGhost
2289184a62
files: sync from openwrt v19.07 (#2690) 2020-02-01 16:50:37 +08:00
AmadeusGhost
c7cfa84287
ipq806x: switch to ath10k-ct (#2854) 2020-01-30 01:40:13 +08:00
AmadeusGhost
7c7a6f2e55 kernel: bump to 4.9.208, 4.14.162, 4.19.93 (#2745)
* generic: support mtd-mac-address-ascii

* kernel: bump to 4.9.208, 4.14.162, 4.19.93

* bcm2708: sync from openwrt v19.07

* firmware: update to latest version

* correct mistakes

* ipq40xx: fixed wrong patch
2020-01-11 23:39:11 +08:00
LEAN-ESX
38f64e0960 ipq806x: revert to kernel 4.14 2019-12-28 17:53:52 -08:00
LEAN-ESX
70e66b06b1 kernel: bump to 4.9.207, 4.14.160, 4.19.91 2019-12-24 23:57:52 -08:00
LEAN-ESX
a70a719e81 kernel: bump to 4.9.206, 4.14.158, 4.19.88 2019-12-10 19:40:41 -08:00
LEAN-ESX
6e8290d715 kernel: bump to 4.9.205, 4.14.156, 4.19.86 2019-12-01 05:59:29 -08:00