298977887/lede
1
0
Fork 0
mirror of https://github.com/coolsnowwolf/lede.git synced 2025-04-16 04:13:31 +00:00
Code Issues Packages Projects Releases Wiki Activity

ipq806x: add support for RuiJie RG-MTFI-M520 (#5112)

Browse Source 
Fix startup by Mr.chilauhe.

Signed-off-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
This commit is contained in:
AmadeusGhost 2020-07-17 10:53:56 +08:00 committed by GitHub
parent fc0516eae7
commit e47f199950
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
12 changed files with 897 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
include/image-commands.mk
View File

@ -310,6 +310,13 @@ define Build/openmesh-image
"$(call param_get_default,rootfs,$(1),$@)" "rootfs"
endef
define Build/qsdk-ipq-factory-mmc
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
$@.its kernel $(IMAGE_KERNEL) rootfs $(IMAGE_ROOTFS)
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/qsdk-ipq-factory-nand
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
$@.its ubi $@

2
target/linux/ipq806x/Makefile
View File

@ -20,7 +20,7 @@ DEFAULT_PACKAGES += \
kmod-ata-ahci kmod-ata-ahci-platform \
kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
kmod-usb-phy-qcom-dwc3 kmod-usb3 kmod-usb-dwc3-qcom \
kmod-ath10k-ct wpad-basic \
kmod-ath10k-ct wpad-openssl \
uboot-envtools
$(eval $(call BuildTarget))

7
target/linux/ipq806x/base-files/etc/board.d/02_network
View File

@ -48,6 +48,13 @@ qcom,ipq8064-db149)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
;;
ruijie,rg-mtfi-m520)
hw_mac_addr=$(mtd_get_mac_ascii PRODUCTINFO ethaddr)
ucidef_add_switch "switch0" \
"1:lan" "6@eth1" "5:wan" "0@eth0"
ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 1)"
;;
zyxel,nbg6817)
hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
ucidef_add_switch "switch0" \

16
target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -7,6 +7,22 @@
board=$(board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:01:00.0.bin")
case "$board" in
ruijie,rg-mtfi-m520)
caldata_extract "ART" 0x1000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii PRODUCTINFO ethaddr) +2)
;;
esac
;;
"ath10k/cal-pci-0001:01:00.0.bin")
case "$board" in
ruijie,rg-mtfi-m520)
caldata_extract "ART" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii PRODUCTINFO ethaddr) +3)
;;
esac
;;
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case $board in
buffalo,wxr-2533dhp)

15
target/linux/ipq806x/base-files/lib/preinit/05_set_iface_mac_ipq806x.sh Normal file
View File

@ -0,0 +1,15 @@
#!/bin/sh
. /lib/functions.sh
preinit_set_mac_address() {
case $(board_name) in
ruijie,rg-mtfi-m520)
base_mac=$(mtd_get_mac_ascii PRODUCTINFO ethaddr)
ip link set dev eth0 address $(macaddr_add "$base_mac" +1)
ip link set dev eth1 address $(macaddr_add "$base_mac" +2)
;;
esac
}
boot_hook_add preinit_main preinit_set_mac_address

3
target/linux/ipq806x/base-files/lib/upgrade/platform.sh
View File

@ -30,6 +30,9 @@ platform_do_upgrade() {
linksys,ea8500)
platform_do_upgrade_linksys "$1"
;;
ruijie,rg-mtfi-m520)
ruijie_do_upgrade "$1"
;;
tplink,c2600)
PART_NAME="os-image:rootfs"
MTD_CONFIG_ARGS="-s 0x200000"

54
target/linux/ipq806x/base-files/lib/upgrade/ruijie.sh Normal file
View File

@ -0,0 +1,54 @@
#
# Copyright (C) 2016 lede-project.org
#
ruijie_do_flash() {
local tar_file=$1
local kernel=$2
local rootfs=$3
# keep sure its unbound
losetup --detach-all || {
echo Failed to detach all loop devices. Skip this try.
reboot -f
}
# use the first found directory in the tar archive
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
board_dir=${board_dir%/}
echo "flashing kernel to $kernel"
tar xf $tar_file ${board_dir}/kernel -O > $kernel
echo "flashing rootfs to $rootfs"
tar xf $tar_file ${board_dir}/root -O > $rootfs
# Cleanup
losetup -d /dev/loop0 >/dev/null 2>&1
sync
umount -a
reboot -f
}
ruijie_do_upgrade() {
local tar_file="$1"
local board=$(board_name)
local kernel=
local rootfs=
case "$board" in
ruijie,rg-mtfi-m520)
kernel="/dev/mmcblk0p2"
rootfs="/dev/mmcblk0p3"
;;
*)
return 1
;;
esac
ruijie_do_flash $tar_file $kernel $rootfs
nand_do_upgrade "$1"
return 0
}

388
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-rg-mtfi-m520.dts Normal file
View File

@ -0,0 +1,388 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Ruijie RG-MTFi-M520";
compatible = "ruijie,rg-mtfi-m520", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x7e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
sdcc1 = &sdcc1;
};
chosen {
bootargs = "root=/dev/mmcblk0p3 rootfstype=squashfs,ext4 rootwait noinitrd";
stdout-path = "serial0:115200n8";
};
cpus {
idle-states {
CPU_SPC: spc {
status = "disabled";
};
};
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio53";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
clk {
pins = "gpio1";
input-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62";
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
input-disable;
};
};
sdcc1_pins: sdcc1_pinmux {
mux {
pins = "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45", "gpio46", "gpio47";
function = "sdc1";
};
cmd {
pins = "gpio45";
drive-strength = <10>;
bias-pull-up;
};
data {
pins = "gpio38", "gpio39", "gpio40", "gpio41",
"gpio43", "gpio44", "gpio46", "gpio47";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio42";
drive-strength = <16>;
bias-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
cs {
pins = "gpio20";
drive-strength = <12>;
};
};
};
gsbi2: gsbi@12480000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
i2c@124a0000 {
status = "okay";
lm75@48 {
status = "okay";
compatible = "lm75";
reg = <0x48>;
};
pcf8563: rtc@51 {
status = "okay";
compatible = "nxp,pcf8563";
reg = <0x51>;
};
tca9539@74 {
status = "okay";
compatible = "ti,tca9539";
reg = <0x74>;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x10000>;
read-only;
};
MIBIB@10000 {
label = "MIBIB";
reg = <0x10000 0x10000>;
read-only;
};
SBL2@20000 {
label = "SBL2";
reg = <0x20000 0x20000>;
read-only;
};
SBL3@40000 {
label = "SBL3";
reg = <0x40000 0x30000>;
read-only;
};
DDRCONFIG@70000 {
label = "DDRCONFIG";
reg = <0x70000 0x10000>;
read-only;
};
PRODUCTINFO@80000 {
label = "PRODUCTINFO";
reg = <0x80000 0x10000>;
read-only;
};
TZ@90000 {
label = "TZ";
reg = <0x90000 0x30000>;
read-only;
};
RPM@c0000 {
label = "RPM";
reg = <0xc0000 0x20000>;
read-only;
};
APPSBL@e0000 {
label = "APPSBL";
reg = <0xe0000 0x80000>;
read-only;
};
APPSBLENV@160000 {
label = "APPSBLENV";
reg = <0x160000 0x10000>;
read-only;
};
BOOTCONFIG@170000 {
label = "BOOTCONFIG";
reg = <0x170000 0x10000>;
read-only;
};
ART@180000 {
label = "ART";
reg = <0x180000 0x40000>;
read-only;
};
};
};
};
sata-phy@1b400000 {
status = "okay";
};
sata@29000000 {
ports-implemented = <0x1>;
status = "okay";
};
usb3_0: usb3@110f8800 {
status = "okay";
};
usb3_1: usb3@100f8800 {
status = "okay";
};
pcie0: pci@1b500000 {
status = "okay";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "okay";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
force_gen1 = <1>;
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
amba {
sdcc1: sdcc@12400000 {
status = "okay";
pinctrl-0 = <&sdcc1_pins>;
pinctrl-names = "default";
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&adm_dma {
status = "okay";
};

382
target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-rg-mtfi-m520.dts Normal file
View File

@ -0,0 +1,382 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Ruijie RG-MTFi-M520";
compatible = "ruijie,rg-mtfi-m520", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x7e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
sdcc1 = &sdcc1;
};
chosen {
bootargs = "root=/dev/mmcblk0p3 rootfstype=squashfs,ext4 rootwait noinitrd";
stdout-path = "serial0:115200n8";
};
cpus {
idle-states {
CPU_SPC: spc {
status = "disabled";
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio53";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "mdio";
drive-strength = <8>;
bias-disable;
};
clk {
pins = "gpio1";
input-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62";
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
input-disable;
};
};
sdcc1_pins: sdcc1_pinmux {
mux {
pins = "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45", "gpio46", "gpio47";
function = "sdc1";
};
cmd {
pins = "gpio45";
drive-strength = <10>;
bias-pull-up;
};
data {
pins = "gpio38", "gpio39", "gpio40", "gpio41",
"gpio43", "gpio44", "gpio46", "gpio47";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio42";
drive-strength = <16>;
bias-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
cs {
pins = "gpio20";
drive-strength = <12>;
};
};
};
&gsbi2 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
i2c@124a0000 {
status = "okay";
lm75@48 {
status = "okay";
compatible = "lm75";
reg = <0x48>;
};
pcf8563: rtc@51 {
status = "okay";
compatible = "nxp,pcf8563";
reg = <0x51>;
};
tca9539@74 {
status = "okay";
compatible = "ti,tca9539";
reg = <0x74>;
};
};
};
&gsbi4 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x10000>;
read-only;
};
MIBIB@10000 {
label = "MIBIB";
reg = <0x10000 0x10000>;
read-only;
};
SBL2@20000 {
label = "SBL2";
reg = <0x20000 0x20000>;
read-only;
};
SBL3@40000 {
label = "SBL3";
reg = <0x40000 0x30000>;
read-only;
};
DDRCONFIG@70000 {
label = "DDRCONFIG";
reg = <0x70000 0x10000>;
read-only;
};
PRODUCTINFO@80000 {
label = "PRODUCTINFO";
reg = <0x80000 0x10000>;
read-only;
};
TZ@90000 {
label = "TZ";
reg = <0x90000 0x30000>;
read-only;
};
RPM@c0000 {
label = "RPM";
reg = <0xc0000 0x20000>;
read-only;
};
APPSBL@e0000 {
label = "APPSBL";
reg = <0xe0000 0x80000>;
read-only;
};
APPSBLENV@160000 {
label = "APPSBLENV";
reg = <0x160000 0x10000>;
read-only;
};
BOOTCONFIG@170000 {
label = "BOOTCONFIG";
reg = <0x170000 0x10000>;
read-only;
};
ART@180000 {
label = "ART";
reg = <0x180000 0x40000>;
read-only;
};
};
};
};
&sata_phy {
status = "okay";
};
&sata {
ports-implemented = <0x1>;
status = "okay";
};
&usb3_0 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
/delete-property/ perst-gpios;
};
&pcie1 {
status = "okay";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
/delete-property/ perst-gpios;
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&amba {
sdcc1: sdcc@12400000 {
status = "okay";
pinctrl-0 = <&sdcc1_pins>;
pinctrl-names = "default";
};
};
&adm_dma {
status = "okay";
};

20
target/linux/ipq806x/image/Makefile
View File

@ -265,6 +265,26 @@ define Device/qcom_ipq8064-db149
endef
TARGET_DEVICES += qcom_ipq8064-db149
define Device/ruijie_rg-mtfi-m520
DEVICE_VENDOR := Ruijie
DEVICE_MODEL := RG-MTFi-M520
SOC := qcom-ipq8064
KERNEL_SIZE := 4096k
BLOCKSIZE := 64k
BOARD_NAME := rg-mtfi-m520
KERNEL_SUFFIX := -uImage
KERNEL = kernel-bin | append-dtb | uImage none | pad-to $${KERNEL_SIZE}
KERNEL_NAME := zImage
IMAGES := factory.bin sysupgrade.bin mmcblk0p2-kernel.bin mmcblk0p3-rootfs.bin
IMAGE/factory.bin := qsdk-ipq-factory-mmc
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata
IMAGE/mmcblk0p2-kernel.bin := append-kernel | pad-to $$$${KERNEL_SIZE}
IMAGE/mmcblk0p3-rootfs.bin := append-rootfs | pad-rootfs
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct e2fsprogs f2fs-tools \
kmod-gpio-pca953x kmod-hwmon-lm75 kmod-fs-ext4 kmod-fs-f2fs kmod-rtc-pcf8563 losetup
endef
TARGET_DEVICES += ruijie_rg-mtfi-m520
define Device/tplink_c2600
$(call Device/TpSafeImage)
DEVICE_VENDOR := TP-Link

3
target/linux/ipq806x/patches-4.19/0069-arm-boot-add-dts-files.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -791,6 +791,18 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -791,6 +791,19 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq4019-ap.dk07.1-c1.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
qcom-ipq8064-ap148.dtb \
@ -21,6 +21,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq8064-ea8500.dtb \
+ qcom-ipq8064-r7500.dtb \
+ qcom-ipq8064-r7500v2.dtb \
+ qcom-ipq8064-rg-mtfi-m520.dtb \
+ qcom-ipq8064-wg2600hp.dtb \
+ qcom-ipq8064-wpq864.dtb \
+ qcom-ipq8064-wxr-2533dhp.dtb \

3
target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -843,6 +843,18 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -843,6 +843,19 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq4019-ap.dk07.1-c1.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
qcom-ipq8064-ap148.dtb \
@ -21,6 +21,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq8064-ea8500.dtb \
+ qcom-ipq8064-r7500.dtb \
+ qcom-ipq8064-r7500v2.dtb \
+ qcom-ipq8064-rg-mtfi-m520.dtb \
+ qcom-ipq8064-wg2600hp.dtb \
+ qcom-ipq8064-wpq864.dtb \
+ qcom-ipq8064-wxr-2533dhp.dtb \