kernel: bump to 4.9.208, 4.14.162, 4.19.93 (#2745)

* generic: support mtd-mac-address-ascii

* kernel: bump to 4.9.208, 4.14.162, 4.19.93

* bcm2708: sync from openwrt v19.07

* firmware: update to latest version

* correct mistakes

* ipq40xx: fixed wrong patch

include/kernel-version.mk

@@ -6,13 +6,13 @@ ifdef CONFIG_TESTING_KERNEL
   KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
 endif
 
-LINUX_VERSION-4.9 = .207
-LINUX_VERSION-4.14 = .160
-LINUX_VERSION-4.19 = .91
+LINUX_VERSION-4.9 = .208
+LINUX_VERSION-4.14 = .162
+LINUX_VERSION-4.19 = .93
 
-LINUX_KERNEL_HASH-4.9.207 = ca86637e7b5bec65eeb7da695824e0e8aca5ba52eb742885f0b7241977400124
-LINUX_KERNEL_HASH-4.14.160 = c60326bad1bcdede514ca8a0bb96843fa7578ef00829cced6218b888b2efa92c
-LINUX_KERNEL_HASH-4.19.91 = f403c3dee12ded0af1889c78871abf7a531a978ba423f1ca772de702a92c3447
+LINUX_KERNEL_HASH-4.9.208 = b7ad1c9841d671d026c55a4c91c77205f8b488ca5f980f838591c68662e0525a
+LINUX_KERNEL_HASH-4.14.162 = f65170224cd4359ce8b2793b492bd8127abdd0b91350484e001bce13f0c98b4b
+LINUX_KERNEL_HASH-4.19.93 = 2af5d23f82a8bf69a6e4d8407579293b7beeebd3054dc464d48bdb5d2d7f5834
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

package/firmware/am33x-cm3/Makefile

@@ -1,42 +0,0 @@
-#
-# Copyright (C) 2014 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=am33x-cm3
-PKG_VERSION:=20130304
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://arago-project.org/git/projects/am33x-cm3.git
-PKG_SOURCE_VERSION:=32cf44e25b5828b87af6dceebc3a49fed5d858ac
-PKG_MIRROR_HASH:=71d4029eed4ef58a1e0beb299d5c876bf0b9a790ecac52aacf1d510f5841d959
-
-PKG_MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-
-PKG_FLAGS:=nonshared
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/am33x-cm3
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  URL:=http://arago-project.org/git/projects/?p=am33x-cm3.git
-  TITLE:=TI AM335x PM firmware
-  DEPENDS:=@TARGET_omap
-endef
-
-define Build/Compile
-	$(MAKE) CROSS_COMPILE=$(TARGET_CROSS) -C $(PKG_BUILD_DIR)
-endef
-
-define Package/am33x-cm3/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(CP) $(PKG_BUILD_DIR)/bin/am335x-pm-firmware.bin $(1)/lib/firmware
-endef
-
-$(eval $(call BuildPackage,am33x-cm3))

package/firmware/brcmfmac-board-rpi/Makefile

@@ -1,53 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=brcmfmac-board-rpi
-PKG_VERSION:=2018-03-12
-PKG_RELEASE:=86e88fbf0345da49555d0ec34c80b4fbae7d0cd3
-PKG_FLAGS:=nonshared
-
-include $(INCLUDE_DIR)/package.mk
-
-BRCMFMAC434XX_SDIO_URL:=@GITHUB/RPi-Distro/firmware-nonfree/$(PKG_RELEASE)/brcm/
-BRCMFMAC43455_SDIO_FILE:=brcmfmac43455-sdio-$(PKG_RELEASE)
-
-define Download/brcmfmac43455_sdio_clm_blob
-  FILE:=$(BRCMFMAC43455_SDIO_FILE).clm_blob
-  URL:=$(BRCMFMAC434XX_SDIO_URL)
-  URL_FILE:=brcmfmac43455-sdio.clm_blob
-  HASH:=8e2250518bc789e53109728c3c0a6124bc3801a75a1cb4966125753cf1f0252e
-endef
-$(eval $(call Download,brcmfmac43455_sdio_clm_blob))
-
-define Package/brcmfmac-board-rpi/Default
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  URL:=https://github.com/RPi-Distro/firmware-nonfree/
-  DEPENDS:=@TARGET_brcm2708
-  PKGARCH:=all
-endef
-
-define Package/brcmfmac-firmware-43455-clm_blob
-  $(call Package/brcmfmac-board-rpi/Default)
-  TITLE:=BCM43455 RPi SDIO Localisation Blob
-endef
-
-define Package/brcmfmac-firmware-43455-clm_blob/description
-  Localisation blob for the Broadcom BCM43455 on RPi boards.
-endef
-
-define Build/Prepare
-	rm -rf $(PKG_BUILD_DIR)
-	mkdir -p $(PKG_BUILD_DIR)
-	cp $(DL_DIR)/$(BRCMFMAC43455_SDIO_FILE).clm_blob $(PKG_BUILD_DIR)/brcmfmac43455-sdio.clm_blob
-endef
-
-define Build/Compile
-	true
-endef
-
-define Package/brcmfmac-firmware-43455-clm_blob/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/brcmfmac43455-sdio.clm_blob $(1)/lib/firmware/brcm/
-endef
-
-$(eval $(call BuildPackage,brcmfmac-firmware-43455-clm_blob))

package/firmware/cypress-firmware/Makefile

@@ -0,0 +1,239 @@
+#
+# Copyright (C) 2019 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+UNPACK_CMD=unzip -q -p $(DL_DIR)/$(PKG_SOURCE) $(PKG_SOURCE_UNZIP) | gzip -dc | $(HOST_TAR) -C $(1) $(TAR_OPTIONS)
+
+PKG_NAME:=cypress-firmware
+PKG_VERSION:=v4.14.77-2019_1031
+
+PKG_SOURCE_UNZIP:=cypress-firmware-$(PKG_VERSION).tar.gz
+PKG_SOURCE:=cypress-fmac-$(PKG_VERSION).zip
+PKG_SOURCE_URL:=https://community.cypress.com/servlet/JiveServlet/download/17441-2-50210/
+PKG_HASH:=bc2eec0d144a88e3105a06cac8039a7f13becde67dfe2a86793ba66f6a2510e0
+
+PKG_MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/cypress-firmware-default
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  URL:=https://community.cypress.com/community/linux
+endef
+
+define Build/Compile
+	true
+endef
+
+# Cypress 43340 SDIO Firmware
+define Package/cypress-firmware-43340-sdio
+  $(Package/cypress-firmware-default)
+  TITLE:=CYW43340 FullMac SDIO firmware
+endef
+
+define Package/cypress-firmware-43340-sdio/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac43340-sdio.bin \
+		$(1)/lib/firmware/brcm/brcmfmac43340-sdio.bin
+endef
+
+$(eval $(call BuildPackage,cypress-firmware-43340-sdio))
+
+# Cypress 43362 SDIO Firmware
+define Package/cypress-firmware-43362-sdio
+  $(Package/cypress-firmware-default)
+  TITLE:=CYW43362 FullMac SDIO firmware
+endef
+
+define Package/cypress-firmware-43362-sdio/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac43362-sdio.bin \
+		$(1)/lib/firmware/brcm/brcmfmac43362-sdio.bin
+endef
+
+$(eval $(call BuildPackage,cypress-firmware-43362-sdio))
+
+# Cypress 4339 SDIO Firmware
+define Package/cypress-firmware-4339-sdio
+  $(Package/cypress-firmware-default)
+  TITLE:=CYW4339 FullMac SDIO firmware
+endef
+
+define Package/cypress-firmware-4339-sdio/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4339-sdio.bin \
+		$(1)/lib/firmware/brcm/brcmfmac4339-sdio.bin
+endef
+
+$(eval $(call BuildPackage,cypress-firmware-4339-sdio))
+
+# Cypress 43430 SDIO Firmware
+define Package/cypress-firmware-43430-sdio
+  $(Package/cypress-firmware-default)
+  TITLE:=CYW43430 FullMac SDIO firmware
+endef
+
+define Package/cypress-firmware-43430-sdio/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac43430-sdio.bin \
+		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac43430-sdio.clm_blob \
+		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.clm_blob
+endef
+
+$(eval $(call BuildPackage,cypress-firmware-43430-sdio))
+
+# Cypress 43455 SDIO Firmware
+define Package/cypress-firmware-43455-sdio
+  $(Package/cypress-firmware-default)
+  TITLE:=CYW43455 FullMac SDIO firmware
+endef
+
+define Package/cypress-firmware-43455-sdio/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac43455-sdio.bin \
+		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac43455-sdio.clm_blob \
+		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.clm_blob
+endef
+
+$(eval $(call BuildPackage,cypress-firmware-43455-sdio))
+
+# Cypress 4354 SDIO Firmware
+define Package/cypress-firmware-4354-sdio
+  $(Package/cypress-firmware-default)
+  TITLE:=CYW4354 FullMac SDIO firmware
+endef
+
+define Package/cypress-firmware-4354-sdio/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4354-sdio.bin \
+		$(1)/lib/firmware/brcm/brcmfmac4354-sdio.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4354-sdio.clm_blob \
+		$(1)/lib/firmware/brcm/brcmfmac4354-sdio.clm_blob
+endef
+
+$(eval $(call BuildPackage,cypress-firmware-4354-sdio))
+
+# Cypress 4356 PCIe Firmware
+define Package/cypress-firmware-4356-pcie
+  $(Package/cypress-firmware-default)
+  TITLE:=CYW4356 FullMac PCIe firmware
+endef
+
+define Package/cypress-firmware-4356-pcie/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4356-pcie.bin \
+		$(1)/lib/firmware/brcm/brcmfmac4356-pcie.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4356-pcie.clm_blob \
+		$(1)/lib/firmware/brcm/brcmfmac4356-pcie.clm_blob
+endef
+
+$(eval $(call BuildPackage,cypress-firmware-4356-pcie))
+
+# Cypress 4356 SDIO Firmware
+define Package/cypress-firmware-4356-sdio
+  $(Package/cypress-firmware-default)
+  TITLE:=CYW4356 FullMac SDIO firmware
+endef
+
+define Package/cypress-firmware-4356-sdio/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4356-sdio.bin \
+		$(1)/lib/firmware/brcm/brcmfmac4356-sdio.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4356-sdio.clm_blob \
+		$(1)/lib/firmware/brcm/brcmfmac4356-sdio.clm_blob
+endef
+
+$(eval $(call BuildPackage,cypress-firmware-4356-sdio))
+
+# Cypress 4359 PCIe Firmware
+define Package/cypress-firmware-4359-pcie
+  $(Package/cypress-firmware-default)
+  TITLE:=CYW4359 FullMac PCIe firmware
+endef
+
+define Package/cypress-firmware-4359-pcie/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4359-pcie.bin \
+		$(1)/lib/firmware/brcm/brcmfmac4359-pcie.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4359-pcie.clm_blob \
+		$(1)/lib/firmware/brcm/brcmfmac4359-pcie.clm_blob
+endef
+
+$(eval $(call BuildPackage,cypress-firmware-4359-pcie))
+
+# Cypress 4359 SDIO Firmware
+define Package/cypress-firmware-4359-sdio
+  $(Package/cypress-firmware-default)
+  TITLE:=CYW4359 FullMac SDIO firmware
+endef
+
+define Package/cypress-firmware-4359-sdio/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4359-sdio.bin \
+		$(1)/lib/firmware/brcm/brcmfmac4359-sdio.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4359-sdio.clm_blob \
+		$(1)/lib/firmware/brcm/brcmfmac4359-sdio.clm_blob
+endef
+
+$(eval $(call BuildPackage,cypress-firmware-4359-sdio))
+
+# Cypress 4373 SDIO Firmware
+define Package/cypress-firmware-4373-sdio
+  $(Package/cypress-firmware-default)
+  TITLE:=CYW4373 FullMac SDIO firmware
+endef
+
+define Package/cypress-firmware-4373-sdio/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4373-sdio.bin \
+		$(1)/lib/firmware/brcm/brcmfmac4373-sdio.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4373-sdio.clm_blob \
+		$(1)/lib/firmware/brcm/brcmfmac4373-sdio.clm_blob
+endef
+
+$(eval $(call BuildPackage,cypress-firmware-4373-sdio))
+
+# Cypress 4373 USB Firmware
+define Package/cypress-firmware-4373-usb
+  $(Package/cypress-firmware-default)
+  TITLE:=CYW4373 FullMac USB firmware
+endef
+
+define Package/cypress-firmware-4373-usb/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4373-usb.bin \
+		$(1)/lib/firmware/brcm/brcmfmac4373-usb.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/firmware/brcmfmac4373.clm_blob \
+		$(1)/lib/firmware/brcm/brcmfmac4373.clm_blob
+endef
+
+$(eval $(call BuildPackage,cypress-firmware-4373-usb))

package/firmware/cypress-nvram/Makefile

@@ -0,0 +1,95 @@
+#
+# Copyright (C) 2019 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=cypress-nvram
+PKG_SOURCE_DATE:=2019-09-03
+PKG_SOURCE_VERSION:=e7b78df22f2a0c5f56abb7b5880661611de35e5f
+PKG_MIRROR_HASH:=1cb20a749696852be0a512d51961365dd9c031362af0af1a2b9f5a3fb894885f
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/openwrt/cypress-nvram.git
+
+PKG_MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/cypress-nvram-default
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  URL:=https://community.cypress.com/community/linux
+endef
+
+define Build/Compile
+	true
+endef
+
+# Cypress 43430 SDIO Raspberry Pi 3B NVRAM
+define Package/cypress-nvram-43430-sdio-rpi-3b
+  $(Package/cypress-nvram-default)
+  TITLE:=CYW43430 NVRAM for Raspberry Pi 3B
+  DEPENDS:=@TARGET_brcm2708
+endef
+
+define Package/cypress-nvram-43430-sdio-rpi-3b/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/brcmfmac43430-sdio.raspberrypi,3-model-b.txt \
+		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt
+endef
+
+$(eval $(call BuildPackage,cypress-nvram-43430-sdio-rpi-3b))
+
+# Cypress 43430 SDIO Raspberry Pi Zero W NVRAM
+define Package/cypress-nvram-43430-sdio-rpi-zero-w
+  $(Package/cypress-nvram-default)
+  TITLE:=CYW43430 NVRAM for Raspberry Pi Zero W
+  DEPENDS:=@TARGET_brcm2708
+endef
+
+define Package/cypress-nvram-43430-sdio-rpi-zero-w/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt \
+		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt
+endef
+
+$(eval $(call BuildPackage,cypress-nvram-43430-sdio-rpi-zero-w))
+
+# Cypress 43455 SDIO Raspberry Pi 3B+ NVRAM
+define Package/cypress-nvram-43455-sdio-rpi-3b-plus
+  $(Package/cypress-nvram-default)
+  TITLE:=CYW43455 NVRAM for Raspberry Pi 3B+
+  DEPENDS:=@TARGET_brcm2708
+endef
+
+define Package/cypress-nvram-43455-sdio-rpi-3b-plus/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt \
+		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt
+endef
+
+$(eval $(call BuildPackage,cypress-nvram-43455-sdio-rpi-3b-plus))
+
+# Cypress 43455 SDIO Raspberry Pi 4B NVRAM
+define Package/cypress-nvram-43455-sdio-rpi-4b
+  $(Package/cypress-nvram-default)
+  TITLE:=CYW43455 NVRAM for Raspberry Pi 4B
+  DEPENDS:=@TARGET_brcm2708
+endef
+
+define Package/cypress-nvram-43455-sdio-rpi-4b/install
+	$(INSTALL_DIR) $(1)/lib/firmware/brcm
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/brcmfmac43455-sdio.raspberrypi,4-model-b.txt \
+		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
+endef
+
+$(eval $(call BuildPackage,cypress-nvram-43455-sdio-rpi-4b))

package/firmware/intel-microcode/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=intel-microcode
-PKG_VERSION:=20180807a
+PKG_VERSION:=20190918
 PKG_RELEASE:=1
 
 PKG_SOURCE:=intel-microcode_3.$(PKG_VERSION).$(PKG_RELEASE).tar.xz
 PKG_SOURCE_URL:=http://ftp.debian.org/debian/pool/non-free/i/intel-microcode/
-PKG_HASH:=1a7cb96d5c6a4abac2936236223d9bea79d7442dc1cfe9b712ff8e35374f0f9f
+PKG_HASH:=b7ecb5dd30d71e9b3c2ab184693a876171392e0d80d138c3560c662e5f2a2247
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-3.$(PKG_VERSION).$(PKG_RELEASE)
 
 PKG_BUILD_DEPENDS:=iucode-tool/host

package/firmware/layerscape/fman-ucode/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=fman-ucode
-PKG_VERSION:=lsdk-1806
+PKG_VERSION:=lsdk-1903
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/NXP/qoriq-fm-ucode.git
 PKG_SOURCE_VERSION:=c275e91392e2adab1ed22f3867b8269ca3c54014
-PKG_MIRROR_HASH:=4e8914340c4a08941898900500f3239762af933ff359bebcf988a10ac30b2bec
+PKG_MIRROR_HASH:=a630f1a86e4a67a0e390312291702560e3f64dd74fe6ccb8f3be4584d00c7f80
 
 include $(INCLUDE_DIR)/package.mk
 

package/firmware/layerscape/ls-dpl/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ls-dpl
-PKG_VERSION:=lsdk-1806
+PKG_VERSION:=lsdk-1903
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/mc-utils
-PKG_SOURCE_VERSION:=de3c46f16732f5e050851277b91e82d63818ca58
-PKG_MIRROR_HASH:=b19bba34abbb83a204ac925a18425463e508c812c43a59eafc89347fc09d5f0a
+PKG_SOURCE_VERSION:=eeb8972a3d4137c87a54c2795452b17f254a68c7
+PKG_MIRROR_HASH:=e96e72793fb9fea1d4f5112d318059ea4c836d65c02852d207407edf13fc92af
 
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/kernel.mk

package/firmware/layerscape/ls-mc/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ls-mc
-PKG_VERSION:=lsdk-1806
+PKG_VERSION:=lsdk-1903
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/NXP/qoriq-mc-binary.git
-PKG_SOURCE_VERSION:=9c1d73016b47f8654d48f0ccff776e5e4588d822
-PKG_MIRROR_HASH:=b50e98d7de3c1754fc1d5aed2cb5a10c5d3535bc609407fafbab8ecce09661fa
+PKG_SOURCE_VERSION:=bd64d1824681b009fd83b0a3699e45b117b72695
+PKG_MIRROR_HASH:=17ecfd780b8d884b3843d2b8fbcaf29410fdacdc03ab3fe81ae7ade994d7fc0a
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -23,7 +23,7 @@ define Package/layerscape-mc-ls1088ardb
   CATEGORY:=Firmware
   TITLE:=NXP LS1088ARDB MC firmware
   DEPENDS:=@TARGET_layerscape
-  CONFIG:=ls1088a/mc_10.8.0_ls1088a_20180515.itb
+  CONFIG:=ls1088a/mc_10.14.3_ls1088a.itb
 endef
 
 define Package/layerscape-mc-ls2088ardb
@@ -31,7 +31,7 @@ define Package/layerscape-mc-ls2088ardb
   CATEGORY:=Firmware
   TITLE:=NXP LS2088ARDB MC firmware
   DEPENDS:=@TARGET_layerscape
-  CONFIG:=ls2088a/mc_10.8.0_ls2088a_20180515.itb
+  CONFIG:=ls2088a/mc_10.14.3_ls2088a.itb
 endef
 
 define Build/Compile

package/firmware/layerscape/ls-ppa/Makefile

@@ -1,84 +0,0 @@
-#
-# Copyright 2017 NXP
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ls-ppa
-PKG_VERSION:=lsdk-1806
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/yangbolu1991/ppa-binary.git
-PKG_SOURCE_VERSION:=73ce533bed868717b891e5dbf881428f56f11b4e
-PKG_MIRROR_HASH:=d917a692197e8c3c3db6de1f8a4bc0e52dca5fc6fa84a02d68d79072cd6cbc3f
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/layerscape-ppa/Config
-  define Package/layerscape-ppa-$(1)
-    SECTION:=firmware
-    CATEGORY:=Firmware
-    TITLE:=$(2)
-    DEPENDS:=@TARGET_layerscape
-    CONFIG:=$(3)
-  endef
-endef
-
-define Package/layerscape-ppa/ls1012ardb
-  TITLE:=NXP LS1012ARDB PPA binary
-  CONFIG:=ppa-ls1012a.itb
-endef
-
-define Package/layerscape-ppa/ls1012afrwy
-  TITLE:=NXP LS1012AFRWY PPA binary
-  CONFIG:=ppa-ls1012a.itb
-endef
-
-define Package/layerscape-ppa/ls1043ardb
-  TITLE:=NXP LS1043ARDB PPA binary
-  CONFIG:=ppa-ls1043a.itb
-endef
-
-define Package/layerscape-ppa/ls1046ardb
-  TITLE:=NXP LS1046ARDB PPA binary
-  CONFIG:=ppa-ls1046a.itb
-endef
-
-define Package/layerscape-ppa/ls1088ardb
-  TITLE:=NXP LS1088ARDB PPA binary
-  CONFIG:=ppa-ls1088a.itb
-endef
-
-define Package/layerscape-ppa/ls2088ardb
-  TITLE:=NXP LS2088ARDB PPA binary
-  CONFIG:=ppa-ls2088a.itb
-endef
-
-define Build/Compile
-endef
-
-define Package/layerscape-ppa/Install
-  define Package/layerscape-ppa-$(1)/install
-	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
-	$(CP) $(PKG_BUILD_DIR)/$(CONFIG) $(STAGING_DIR_IMAGE)/$(1)-ppa.itb
-  endef
-endef
-
-PPAS := \
-  ls1012ardb \
-  ls1012afrwy \
-  ls1043ardb \
-  ls1046ardb \
-  ls1088ardb \
-  ls2088ardb
-
-$(foreach ppa,$(PPAS), \
-	$(eval $(Package/layerscape-ppa/$(ppa))) \
-	$(eval $(call Package/layerscape-ppa/Config,$(ppa),$(TITLE),$(CONFIG))) \
-	$(eval $(call Package/layerscape-ppa/Install,$(ppa))) \
-	$(eval $(call BuildPackage,layerscape-ppa-$(ppa))) \
-)

package/firmware/layerscape/ls-rcw/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ls-rcw
-PKG_VERSION:=lsdk-1806
+PKG_VERSION:=lsdk-1903
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/rcw
-PKG_SOURCE_VERSION:=1f43bef4b4475d8e81c9b3b8c5bdd6c1ce8cfa6c
-PKG_MIRROR_HASH:=a3b455bcc1f070c8e51f520e32b62cec5b05d772d7ae4a876d88fd5f278a7b1c
+PKG_SOURCE_VERSION:=f1377876cc06a87ec8afa8a3412ca7c8455861f2
+PKG_MIRROR_HASH:=a9c97755809994a668ee5f0e535cef9f344fc5523c4299ac76f26c63976c80bc
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -30,12 +30,12 @@ endef
 
 define Package/layerscape-rcw/ls1012ardb
   TITLE:=NXP LS1012ARDB RCW binary
-  CONFIG:=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin.swapped
+  CONFIG:=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin
 endef
 
 define Package/layerscape-rcw/ls1012afrwy
   TITLE:=NXP LS1012AFRWY RCW binary
-  CONFIG:=ls1012afrwy/N_SSNP_3305/rcw_1000_default.bin.swapped
+  CONFIG:=ls1012afrwy/N_SSNP_3305/rcw_1000_default.bin
 endef
 
 define Package/layerscape-rcw/ls1043ardb
@@ -43,9 +43,19 @@ define Package/layerscape-rcw/ls1043ardb
   CONFIG:=ls1043ardb/RR_FQPP_1455/rcw_1600.bin
 endef
 
+define Package/layerscape-rcw/ls1043ardb-sdboot
+  TITLE:=NXP LS1043ARDB SD card boot RCW binary
+  CONFIG:=ls1043ardb/RR_FQPP_1455/rcw_1600_sdboot.bin
+endef
+
 define Package/layerscape-rcw/ls1046ardb
   TITLE:=NXP LS1046ARDB RCW binary
-  CONFIG:=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin.swapped
+  CONFIG:=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin
+endef
+
+define Package/layerscape-rcw/ls1046ardb-sdboot
+  TITLE:=NXP LS1046ARDB SD card boot RCW binary
+  CONFIG:=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_sdboot.bin
 endef
 
 define Package/layerscape-rcw/ls1088ardb
@@ -79,7 +89,9 @@ RCWS := \
   ls1012ardb \
   ls1012afrwy \
   ls1043ardb \
+  ls1043ardb-sdboot \
   ls1046ardb \
+  ls1046ardb-sdboot \
   ls1088ardb \
   ls1088ardb-sdboot \
   ls2088ardb \

package/firmware/layerscape/ppfe-firmware/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ppfe
-PKG_VERSION:=lsdk-1806
+PKG_VERSION:=lsdk-1903
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/NXP/qoriq-engine-pfe-bin.git
-PKG_SOURCE_VERSION:=50c825b9300c5e36548fb5dcbef538b650fc1913
-PKG_MIRROR_HASH:=7627ce260ac4b320f3a7e8ad81db1c3ec2266332762dd1e4313480f7a678fd43
+PKG_SOURCE_VERSION:=58aa0cac630528ed91fe5639700d6b571c0c07b5
+PKG_MIRROR_HASH:=1234a86e879f2eecd3ac4852bb39e4189b03bb659bec228a1d1ccae5ac0229e6
 
 include $(INCLUDE_DIR)/package.mk
 

package/firmware/wireless-regdb/Makefile

@@ -1,26 +1,26 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wireless-regdb
+PKG_VERSION:=2019.06.03
 
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git
-PKG_SOURCE_DATE:=2017-10-20
-PKG_SOURCE_VERSION:=4343d359ed5e7404de8803a74df186457b26ab79
-PKG_MIRROR_HASH:=5f5b669f32ae36cb65b1d99efbbbfd42c2983cda32f6448346e3e54ffaba3889
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
+PKG_SOURCE_URL:=@KERNEL/software/network/wireless-regdb/
+PKG_HASH:=cd917ed86b63ce8d93947979f1f18948f03a4ac0ad89ec25227b36ac00dc54bf
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
 include $(INCLUDE_DIR)/package.mk
 
 define Package/wireless-regdb
+  PKGARCH:=all
   SECTION:=firmware
   CATEGORY:=Firmware
-  URL:=$(patsubst pub/scm,cgit,$(PKG_SOURCE_URL))
+  URL:=https://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git/
   TITLE:=Wireless Regulatory Database
 endef
 
 define Build/Compile
-	python $(PKG_BUILD_DIR)/db2fw.py $(PKG_BUILD_DIR)/regulatory.db $(PKG_BUILD_DIR)/db.txt
+	$(STAGING_DIR_HOST)/bin/$(PYTHON) $(PKG_BUILD_DIR)/db2fw.py $(PKG_BUILD_DIR)/regulatory.db $(PKG_BUILD_DIR)/db.txt
 endef
 
 define Package/wireless-regdb/install

package/firmware/wireless-regdb/patches/010-regdb-fix-compatibility-with-python2.patch

@@ -0,0 +1,58 @@
+From 651e39dee8605995b736b6056c6f7dc5c5a9c948 Mon Sep 17 00:00:00 2001
+From: Johannes Berg <johannes.berg@intel.com>
+Date: Thu, 22 Aug 2019 21:46:27 +0200
+Subject: [PATCH] regdb: fix compatibility with python2
+
+Various changes in the commit mentioned below broke
+compatibility with python2. Restore it in a way that
+makes it worth with both versions.
+
+Fixes: f3c4969c2485 ("wireless-regdb: make scripts compatible with Python 3")
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
+---
+ db2bin.py  | 2 +-
+ db2fw.py   | 2 +-
+ dbparse.py | 3 +--
+ 3 files changed, 3 insertions(+), 4 deletions(-)
+
+--- a/db2bin.py
++++ b/db2bin.py
+@@ -118,7 +118,7 @@ reg_country_ptr.set()
+ for alpha2 in countrynames:
+     coll = countries[alpha2]
+     # struct regdb_file_reg_country
+-    output.write(struct.pack('>BBxBI', alpha2[0], alpha2[1], coll.dfs_region, reg_rules_collections[coll.permissions]))
++    output.write(struct.pack('>2sxBI', alpha2, coll.dfs_region, reg_rules_collections[coll.permissions]))
+ 
+ 
+ if len(sys.argv) > 3:
+--- a/db2fw.py
++++ b/db2fw.py
+@@ -85,7 +85,7 @@ countrynames = list(countries)
+ countrynames.sort()
+ for alpha2 in countrynames:
+     coll = countries[alpha2]
+-    output.write(struct.pack('>BB', alpha2[0], alpha2[1]))
++    output.write(struct.pack('>2s', alpha2))
+     country_ptrs[alpha2] = PTR(output)
+ output.write(b'\x00' * 4)
+ 
+--- a/dbparse.py
++++ b/dbparse.py
+@@ -1,6 +1,5 @@
+ #!/usr/bin/env python
+ 
+-from builtins import bytes
+ from functools import total_ordering
+ import sys, math
+ from math import ceil, log
+@@ -359,7 +358,7 @@ class DBParser(object):
+         for cname in cnames:
+             if len(cname) != 2:
+                 self._warn("country '%s' not alpha2" % cname)
+-            cname = bytes(cname, 'ascii')
++            cname = cname.encode('ascii')
+             if not cname in self._countries:
+                 self._countries[cname] = Country(dfs_region, comments=self._comments)
+             self._current_countries[cname] = self._countries[cname]

package/firmware/wireless-regdb/patches/100-regdb-write-firmware-file-format-version-code-20.patch

@@ -1,251 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Mon, 9 Oct 2017 11:50:57 +0200
-Subject: [PATCH] regdb: write firmware file format (version code 20)
-
-TODO: clean up the Makefile stuff ...
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
- create mode 100755 db2fw.py
-
---- a/Makefile
-+++ b/Makefile
-@@ -1,7 +1,5 @@
- # Install prefix
- PREFIX ?= /usr
--CRDA_PATH ?= $(PREFIX)/lib/crda
--CRDA_KEY_PATH ?= $(CRDA_PATH)/pubkeys
- 
- MANDIR ?= $(PREFIX)/share/man/
- 
-@@ -30,39 +28,47 @@ REGDB_AUTHOR ?= $(shell if [ -f $(DISTRO
- 		fi)
- 
- REGDB_PRIVKEY ?= ~/.wireless-regdb-$(REGDB_AUTHOR).key.priv.pem
--REGDB_PUBKEY ?= $(REGDB_AUTHOR).key.pub.pem
--
--REGDB_UPSTREAM_PUBKEY ?= sforshee.key.pub.pem
-+REGDB_PUBCERT ?= $(REGDB_AUTHOR).x509.pem
- 
- REGDB_CHANGED = $(shell $(SHA1SUM) -c --status sha1sum.txt >/dev/null 2>&1; \
-         if [ $$? -ne 0 ]; then \
--                echo maintainer-clean $(REGDB_PUBKEY); \
-+                echo maintainer-clean $(REGDB_PUBCERT); \
-         fi)
- 
- .PHONY: all clean mrproper install maintainer-clean install-distro-key
- 
--all: $(REGDB_CHANGED) regulatory.bin sha1sum.txt
-+all: $(REGDB_CHANGED) regulatory.db.p7s sha1sum.txt
- 
- clean:
- 	@rm -f *.pyc *.gz
- 
- maintainer-clean: clean
--	@rm -f regulatory.bin
-+	@rm -f regulatory.db regulatory.db.p7s
- 
- mrproper: clean maintainer-clean
--	@echo Removed public key, regulatory.bin and compresed man pages
--	@rm -f $(REGDB_PUBKEY) .custom
-+	@echo Removed public key, regulatory.db* and compressed man pages
-+	@rm -f $(REGDB_PUBCERT) .custom
- 
--regulatory.bin: db.txt $(REGDB_PRIVKEY) $(REGDB_PUBKEY)
--	@echo Generating $@ digitally signed by $(REGDB_AUTHOR)...
--	./db2bin.py regulatory.bin db.txt $(REGDB_PRIVKEY)
-+regulatory.db: db.txt db2fw.py
-+	@echo "Generating $@"
-+	./db2fw.py regulatory.db db.txt
-+
-+regulatory.db.p7s: regulatory.db $(REGDB_PRIVKEY) $(REGDB_PUBCERT)
-+	@echo "Signing regulatory.db (by $(REGDB_AUTHOR))..."
-+	@openssl smime -sign \
-+		-signer $(REGDB_PUBCERT) \
-+		-inkey $(REGDB_PRIVKEY) \
-+		-in $< -nosmimecap -binary \
-+		-outform DER -out $@
- 
- sha1sum.txt: db.txt
- 	sha1sum $< > $@
- 
--$(REGDB_PUBKEY): $(REGDB_PRIVKEY)
--	@echo "Generating public key for $(REGDB_AUTHOR)..."
--	openssl rsa -in $(REGDB_PRIVKEY) -out $(REGDB_PUBKEY) -pubout -outform PEM
-+$(REGDB_PUBCERT): $(REGDB_PRIVKEY)
-+	@echo "Generating certificate for $(REGDB_AUTHOR)..."
-+	@openssl req -config regulatory.openssl.conf \
-+		-key $(REGDB_PRIVKEY) -days 36500 -utf8 -nodes -batch \
-+		-x509 -outform PEM -out $(REGDB_PUBCERT)
- 	@echo $(REGDB_PUBKEY) > .custom
- 
- 
-@@ -97,16 +103,7 @@ install-distro-key: maintainer-clean $(D
- #	make maintainer-clean
- #	make
- #	sudo make install
--install: regulatory.bin.5.gz
--	install -m 755 -d $(DESTDIR)/$(CRDA_PATH)
--	install -m 755 -d $(DESTDIR)/$(CRDA_KEY_PATH)
--	if [ -f .custom ]; then \
--		install -m 644 -t $(DESTDIR)/$(CRDA_KEY_PATH)/ $(shell cat .custom); \
--	fi
--	install -m 644 -t $(DESTDIR)/$(CRDA_KEY_PATH)/ $(REGDB_UPSTREAM_PUBKEY)
--	install -m 644 -t $(DESTDIR)/$(CRDA_PATH)/ regulatory.bin
-+install: regulatory.db.5.gz
-+	install -m 644 -t $(DESTDIR)/$(CRDA_PATH)/ regulatory.db
- 	install -m 755 -d $(DESTDIR)/$(MANDIR)/man5/
--	install -m 644 -t $(DESTDIR)/$(MANDIR)/man5/ regulatory.bin.5.gz
--
--uninstall:
--	rm -rf $(DESTDIR)/$(CRDA_PATH)/
-+	install -m 644 -t $(DESTDIR)/$(MANDIR)/man5/ regulatory.db.5.gz
---- a/README
-+++ b/README
-@@ -18,8 +18,8 @@ python module is used by the web viewer
- implemented as a MoinMoin macro (and used on http://wireless.kernel.org)
- to allow viewing the database for verification.
- 
--The dbparse module is also used by db2bin.py, the `compiler', which
--compiles and signs the binary database.
-+The dbparse module is also used by db2bin.py and db2fw.py, the `compilers'
-+that compile the database to its binary formats.
- 
- For more information, please see the CRDA git repository:
- 
---- /dev/null
-+++ b/db2fw.py
-@@ -0,0 +1,133 @@
-+#!/usr/bin/env python
-+
-+from cStringIO import StringIO
-+import struct
-+import hashlib
-+from dbparse import DBParser
-+import sys
-+
-+MAGIC = 0x52474442
-+VERSION = 20
-+
-+if len(sys.argv) < 3:
-+    print 'Usage: %s output-file input-file' % sys.argv[0]
-+    sys.exit(2)
-+
-+def create_rules(countries):
-+    result = {}
-+    for c in countries.itervalues():
-+        for rule in c.permissions:
-+            result[rule] = 1
-+    return result.keys()
-+
-+def create_collections(countries):
-+    result = {}
-+    for c in countries.itervalues():
-+        result[(c.permissions, c.dfs_region)] = 1
-+    return result.keys()
-+
-+
-+def be32(output, val):
-+    output.write(struct.pack('>I', val))
-+def be16(output, val):
-+    output.write(struct.pack('>H', val))
-+
-+class PTR(object):
-+    def __init__(self, output):
-+        self._output = output
-+        self._pos = output.tell()
-+        be16(output, 0)
-+        self._written = False
-+
-+    def set(self, val=None):
-+        if val is None:
-+            val = self._output.tell()
-+        assert val & 3 == 0
-+        self._offset = val
-+        pos = self._output.tell()
-+        self._output.seek(self._pos)
-+        be16(self._output, val >> 2)
-+        self._output.seek(pos)
-+        self._written = True
-+
-+    def get(self):
-+        return self._offset
-+
-+    @property
-+    def written(self):
-+        return self._written
-+
-+p = DBParser()
-+countries = p.parse(file(sys.argv[2]))
-+rules = create_rules(countries)
-+rules.sort(cmp=lambda x, y: cmp(x.freqband, y.freqband))
-+collections = create_collections(countries)
-+collections.sort(cmp=lambda x, y: cmp(x[0][0].freqband, y[0][0].freqband))
-+
-+output = StringIO()
-+
-+# struct regdb_file_header
-+be32(output, MAGIC)
-+be32(output, VERSION)
-+
-+country_ptrs = {}
-+countrynames = countries.keys()
-+countrynames.sort()
-+for alpha2 in countrynames:
-+    coll = countries[alpha2]
-+    output.write(struct.pack('>cc', str(alpha2[0]), str(alpha2[1])))
-+    country_ptrs[alpha2] = PTR(output)
-+output.write('\x00' * 4)
-+
-+reg_rules = {}
-+flags = 0
-+for reg_rule in rules:
-+    freq_range, power_rule = reg_rule.freqband, reg_rule.power
-+    reg_rules[reg_rule] = output.tell()
-+    assert power_rule.max_ant_gain == 0
-+    flags = 0
-+    # convert to new rule flags
-+    assert reg_rule.flags & ~0x899 == 0
-+    if reg_rule.flags & 1<<0:
-+        flags |= 1<<0
-+    if reg_rule.flags & 1<<3:
-+        flags |= 1<<1
-+    if reg_rule.flags & 1<<4:
-+        flags |= 1<<2
-+    if reg_rule.flags & 1<<7:
-+        flags |= 1<<3
-+    if reg_rule.flags & 1<<11:
-+        flags |= 1<<4
-+    rule_len = 16
-+    cac_timeout = 0 # TODO
-+    if not (flags & 1<<2):
-+        cac_timeout = 0
-+    if cac_timeout:
-+        rule_len += 2
-+    output.write(struct.pack('>BBHIII', rule_len, flags, power_rule.max_eirp * 100,
-+                             freq_range.start * 1000, freq_range.end * 1000, freq_range.maxbw * 1000,
-+                             ))
-+    if cac_timeout:
-+        output.write(struct.pack('>H', cac_timeout))
-+    while rule_len % 4:
-+        output.write('\0')
-+        rule_len += 1
-+
-+for coll in collections:
-+    for alpha2 in countrynames:
-+        if (countries[alpha2].permissions, countries[alpha2].dfs_region) == coll:
-+            assert not country_ptrs[alpha2].written
-+            country_ptrs[alpha2].set()
-+    slen = 3
-+    output.write(struct.pack('>BBBx', slen, len(list(coll[0])), coll[1]))
-+    coll = list(coll[0])
-+    for regrule in coll:
-+        be16(output, reg_rules[regrule] >> 2)
-+    if len(coll) % 2:
-+        be16(output, 0)
-+
-+for alpha2 in countrynames:
-+    assert country_ptrs[alpha2].written
-+
-+outfile = open(sys.argv[1], 'w')
-+outfile.write(output.getvalue())

package/firmware/wireless-regdb/patches/500-world-regd-5GHz.patch

@@ -5,7 +5,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 ---
 --- a/db.txt
 +++ b/db.txt
-@@ -6,7 +6,7 @@ country 00:
+@@ -16,7 +16,7 @@ country 00:
  	# Channel 14. Only JP enables this and for 802.11b only
  	(2474 - 2494 @ 20), (20), NO-IR, NO-OFDM
  	# Channel 36 - 48

package/firmware/wireless-regdb/patches/600-custom-fix-txpower-and-dfs.patch

@@ -1,42 +0,0 @@
-From 7eb6313910023f1be6015a8cd9e1b380ae01af64 Mon Sep 17 00:00:00 2001
-From: Chen Minqiang <ptpt52@gmail.com>
-Date: Sun, 7 Jan 2018 14:38:36 +0800
-Subject: [PATCH] custom fix txpower and dfs
-
----
- db.txt | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/db.txt b/db.txt
-index 75dc0a3..24989ad 100644
---- a/db.txt
-+++ b/db.txt
-@@ -277,9 +277,9 @@ country CL: DFS-JP
- 	(5735 - 5835 @ 80), (20)
- 
- country CN: DFS-FCC
--	(2402 - 2482 @ 40), (20)
--	(5170 - 5250 @ 80), (23), AUTO-BW
--	(5250 - 5330 @ 80), (23), DFS, AUTO-BW
-+	(2402 - 2482 @ 40), (30)
-+	(5170 - 5250 @ 80), (30), AUTO-BW
-+	(5250 - 5330 @ 80), (30), AUTO-BW
- 	(5735 - 5835 @ 80), (30)
- 	# 60 GHz band channels 1,4: 28dBm, channels 2,3: 44dBm
- 	# ref: http://www.miit.gov.cn/n11293472/n11505629/n11506593/n11960250/n11960606/n11960700/n12330791.files/n12330790.pdf
-@@ -1238,9 +1238,9 @@ country UG: DFS-FCC
- country US: DFS-FCC
- 	(2402 - 2472 @ 40), (30)
- 	# 5.15 ~ 5.25 GHz: 30 dBm for master mode, 23 dBm for clients
--	(5170 - 5250 @ 80), (23), AUTO-BW
--	(5250 - 5330 @ 80), (23), DFS, AUTO-BW
--	(5490 - 5730 @ 160), (23), DFS
-+	(5170 - 5250 @ 80), (30), AUTO-BW
-+	(5250 - 5330 @ 80), (30), AUTO-BW
-+	(5490 - 5730 @ 160), (30)
- 	(5735 - 5835 @ 80), (30)
- 	# 60g band
- 	# reference: http://cfr.regstoday.com/47cfr15.aspx#47_CFR_15p255
--- 
-2.7.4
-

target/linux/ar71xx/patches-4.14/910-unaligned_access_hacks.patch

@@ -129,6 +129,15 @@
  struct ip_auth_hdr {
 --- a/include/uapi/linux/ipv6.h
 +++ b/include/uapi/linux/ipv6.h
+@@ -104,7 +104,7 @@ struct ipv6_destopt_hao {
+ 	__u8			type;
+ 	__u8			length;
+ 	struct in6_addr		addr;
+-} __attribute__((packed));
++} __attribute__((packed, aligned(2)));
+ 
+ /*
+  *	IPv6 fixed header
 @@ -131,7 +131,7 @@ struct ipv6hdr {
  
  	struct	in6_addr	saddr;
@@ -316,7 +325,7 @@
  	for (p = *head; p; p = p->next) {
 --- a/net/ipv4/route.c
 +++ b/net/ipv4/route.c
-@@ -465,7 +465,7 @@ static struct neighbour *ipv4_neigh_look
+@@ -466,7 +466,7 @@ static struct neighbour *ipv4_neigh_look
  	else if (skb)
  		pkey = &ip_hdr(skb)->daddr;
  

target/linux/ath79/patches-4.14/910-unaligned_access_hacks.patch

@@ -316,7 +316,7 @@
  	for (p = *head; p; p = p->next) {
 --- a/net/ipv4/route.c
 +++ b/net/ipv4/route.c
-@@ -465,7 +465,7 @@ static struct neighbour *ipv4_neigh_look
+@@ -466,7 +466,7 @@ static struct neighbour *ipv4_neigh_look
  	else if (skb)
  		pkey = &ip_hdr(skb)->daddr;
  

target/linux/ath79/patches-4.19/910-unaligned_access_hacks.patch

@@ -316,7 +316,7 @@
  	list_for_each_entry(p, head, list) {
 --- a/net/ipv4/route.c
 +++ b/net/ipv4/route.c
-@@ -448,7 +448,7 @@ static struct neighbour *ipv4_neigh_look
+@@ -449,7 +449,7 @@ static struct neighbour *ipv4_neigh_look
  	else if (skb)
  		pkey = &ip_hdr(skb)->daddr;
  
@@ -327,7 +327,7 @@
  	return neigh_create(&arp_tbl, pkey, dev);
 --- a/net/ipv4/tcp_output.c
 +++ b/net/ipv4/tcp_output.c
-@@ -444,48 +444,53 @@ static void tcp_options_write(__be32 *pt
+@@ -447,48 +447,53 @@ static void tcp_options_write(__be32 *pt
  	u16 options = opts->options;	/* mungable copy */
  
  	if (unlikely(OPTION_MD5 & options)) {
@@ -404,7 +404,7 @@
  	}
  
  	if (unlikely(opts->num_sack_blocks)) {
-@@ -493,16 +498,17 @@ static void tcp_options_write(__be32 *pt
+@@ -496,16 +501,17 @@ static void tcp_options_write(__be32 *pt
  			tp->duplicate_sack : tp->selective_acks;
  		int this_sack;
  
@@ -428,7 +428,7 @@
  		}
  
  		tp->rx_opt.dsack = 0;
-@@ -515,13 +521,14 @@ static void tcp_options_write(__be32 *pt
+@@ -518,13 +524,14 @@ static void tcp_options_write(__be32 *pt
  
  		if (foc->exp) {
  			len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len;

target/linux/brcm2708/bcm2708/config-4.19

@@ -74,6 +74,7 @@ CONFIG_BUILD_BIN2C=y
 # CONFIG_CACHE_L2X0 is not set
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CLKSRC_MMIO=y
+# CONFIG_CLK_RASPBERRYPI is not set
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_CMA=y
 CONFIG_CMA_ALIGNMENT=8

target/linux/brcm2708/bcm2709/config-4.19

@@ -39,7 +39,7 @@ CONFIG_ARM=y
 CONFIG_ARM_AMBA=y
 CONFIG_ARM_ARCH_TIMER=y
 CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_BCM2835_CPUFREQ=y
+# CONFIG_ARM_BCM2835_CPUFREQ is not set
 CONFIG_ARM_CPU_SUSPEND=y
 CONFIG_ARM_GIC=y
 CONFIG_ARM_HAS_SG_CHAIN=y
@@ -48,6 +48,7 @@ CONFIG_ARM_L1_CACHE_SHIFT_6=y
 CONFIG_ARM_LPAE=y
 CONFIG_ARM_PATCH_IDIV=y
 CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
 # CONFIG_ARM_SCMI_PROTOCOL is not set
 # CONFIG_ARM_SP805_WATCHDOG is not set
 CONFIG_ARM_THUMB=y
@@ -91,6 +92,7 @@ CONFIG_BUILD_BIN2C=y
 # CONFIG_CACHE_L2X0 is not set
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CLKSRC_MMIO=y
+CONFIG_CLK_RASPBERRYPI=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_CMA=y
 CONFIG_CMA_ALIGNMENT=8
@@ -105,7 +107,8 @@ CONFIG_CMA_SIZE_SEL_MBYTES=y
 CONFIG_COMMON_CLK=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_CPUFREQ_DT is not set
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v7=y
 CONFIG_CPU_ABRT_EV7=y
@@ -390,7 +393,6 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_DOMAINS_GENERIC=y
 CONFIG_PCI_MSI=y
 CONFIG_PCI_MSI_IRQ_DOMAIN=y
-# CONFIG_PCI_V3_SEMI is not set
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=3
 CONFIG_PHYLIB=y
@@ -403,6 +405,7 @@ CONFIG_PM_CLK=y
 CONFIG_PM_GENERIC_DOMAINS=y
 CONFIG_PM_GENERIC_DOMAINS_OF=y
 CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_OPP=y
 CONFIG_PM_SLEEP=y
 CONFIG_PM_SLEEP_SMP=y
 CONFIG_POWER_SUPPLY=y

target/linux/brcm2708/bcm2710/config-4.19

@@ -102,13 +102,14 @@ CONFIG_ARM_AMBA=y
 CONFIG_ARM_ARCH_TIMER=y
 CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
 CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-CONFIG_ARM_BCM2835_CPUFREQ=y
+# CONFIG_ARM_BCM2835_CPUFREQ is not set
 CONFIG_ARM_GIC=y
 CONFIG_ARM_GIC_V2M=y
 CONFIG_ARM_GIC_V3=y
 CONFIG_ARM_GIC_V3_ITS=y
 CONFIG_ARM_GIC_V3_ITS_PCI=y
 CONFIG_ARM_PSCI_FW=y
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
 # CONFIG_ARM_SCMI_PROTOCOL is not set
 # CONFIG_ARM_SP805_WATCHDOG is not set
 CONFIG_ARM_TIMER_SP804=y
@@ -144,6 +145,7 @@ CONFIG_CAVIUM_ERRATUM_23154=y
 CONFIG_CAVIUM_ERRATUM_27456=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CLKSRC_MMIO=y
+CONFIG_CLK_RASPBERRYPI=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_CMA=y
 CONFIG_CMA_ALIGNMENT=8
@@ -159,7 +161,8 @@ CONFIG_COMMON_CLK=y
 CONFIG_COMMON_CLK_XGENE=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_CPUFREQ_DT is not set
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -249,6 +252,7 @@ CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
 CONFIG_GENERIC_CSUM=y
 CONFIG_GENERIC_EARLY_IOREMAP=y
 CONFIG_GENERIC_IDLE_POLL_SETUP=y
@@ -453,6 +457,7 @@ CONFIG_PM_CLK=y
 CONFIG_PM_GENERIC_DOMAINS=y
 CONFIG_PM_GENERIC_DOMAINS_OF=y
 CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_OPP=y
 CONFIG_PM_SLEEP=y
 CONFIG_PM_SLEEP_SMP=y
 CONFIG_POWER_RESET=y

target/linux/brcm2708/bcm2711/config-4.19

@@ -102,13 +102,14 @@ CONFIG_ARM_AMBA=y
 CONFIG_ARM_ARCH_TIMER=y
 CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
 CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-CONFIG_ARM_BCM2835_CPUFREQ=y
+# CONFIG_ARM_BCM2835_CPUFREQ is not set
 CONFIG_ARM_GIC=y
 CONFIG_ARM_GIC_V2M=y
 CONFIG_ARM_GIC_V3=y
 CONFIG_ARM_GIC_V3_ITS=y
 CONFIG_ARM_GIC_V3_ITS_PCI=y
 CONFIG_ARM_PSCI_FW=y
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
 # CONFIG_ARM_SCMI_PROTOCOL is not set
 # CONFIG_ARM_SP805_WATCHDOG is not set
 CONFIG_ARM_TIMER_SP804=y
@@ -148,6 +149,7 @@ CONFIG_CAVIUM_ERRATUM_23154=y
 CONFIG_CAVIUM_ERRATUM_27456=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CLKSRC_MMIO=y
+CONFIG_CLK_RASPBERRYPI=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_CMA=y
 CONFIG_CMA_ALIGNMENT=8
@@ -163,7 +165,8 @@ CONFIG_COMMON_CLK=y
 CONFIG_COMMON_CLK_XGENE=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_CPUFREQ_DT is not set
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -253,6 +256,7 @@ CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
 CONFIG_GENERIC_CSUM=y
 CONFIG_GENERIC_EARLY_IOREMAP=y
 CONFIG_GENERIC_IDLE_POLL_SETUP=y
@@ -461,6 +465,7 @@ CONFIG_PM_CLK=y
 CONFIG_PM_GENERIC_DOMAINS=y
 CONFIG_PM_GENERIC_DOMAINS_OF=y
 CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_OPP=y
 CONFIG_PM_SLEEP=y
 CONFIG_PM_SLEEP_SMP=y
 CONFIG_POWER_RESET=y

target/linux/brcm2708/image/Makefile

@@ -16,11 +16,6 @@ define Build/Compile
 endef
 
 ### Image scripts ###
-define Build/kernel-img
-	perl $(LINUX_DIR)/scripts/mkknlimg $@ $@.tmp
-	mv $@.tmp $@
-endef
-
 define Build/boot-common
 	rm -f $@.boot
 	mkfs.fat -C $@.boot $(FAT32_BLOCKS)
@@ -63,7 +58,7 @@ endef
 ### Devices ###
 define Device/Default
   DEVICE_VENDOR := Raspberry Pi
-  KERNEL := kernel-bin | kernel-img
+  KERNEL := kernel-bin
   KERNEL_IMG := kernel.img
   IMAGES := factory.img.gz sysupgrade.img.gz
   IMAGE/sysupgrade.img.gz := boot-common | boot-2708 | sdcard-img | gzip | append-metadata

target/linux/brcm2708/patches-4.19/950-0001-arm-partially-revert-702b94bff3c50542a6e4ab9a4f4cef0.patch

@@ -1,7 +1,7 @@
 From 2096cda971fed28cbc822d8c7d489bf85af22f34 Mon Sep 17 00:00:00 2001
 From: Dan Pasanen <dan.pasanen@gmail.com>
 Date: Thu, 21 Sep 2017 09:55:42 -0500
-Subject: [PATCH 001/806] arm: partially revert
+Subject: [PATCH] arm: partially revert
  702b94bff3c50542a6e4ab9a4f4cef093262fe65
 
 * Re-expose some dmi APIs for use in VCSM

target/linux/brcm2708/patches-4.19/950-0002-smsx95xx-fix-crimes-against-truesize.patch

@@ -1,7 +1,7 @@
 From 26bb49317b44d0927ed7b4be1d72aa11853a01f7 Mon Sep 17 00:00:00 2001
 From: Steve Glendinning <steve.glendinning@smsc.com>
 Date: Thu, 19 Feb 2015 18:47:12 +0000
-Subject: [PATCH 002/806] smsx95xx: fix crimes against truesize
+Subject: [PATCH] smsx95xx: fix crimes against truesize
 
 smsc95xx is adjusting truesize when it shouldn't, and following a recent patch from Eric this is now triggering warnings.
 

target/linux/brcm2708/patches-4.19/950-0003-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch

@@ -1,7 +1,7 @@
 From ac6edc14a931f10413d4586c2d0d1f2ddc1a416a Mon Sep 17 00:00:00 2001
 From: Sam Nazarko <email@samnazarko.co.uk>
 Date: Fri, 1 Apr 2016 17:27:21 +0100
-Subject: [PATCH 003/806] smsc95xx: Experimental: Enable turbo_mode and
+Subject: [PATCH] smsc95xx: Experimental: Enable turbo_mode and
  packetsize=2560 by default
 
 See: http://forum.kodi.tv/showthread.php?tid=285288

target/linux/brcm2708/patches-4.19/950-0004-Allow-mac-address-to-be-set-in-smsc95xx.patch

@@ -1,7 +1,7 @@
 From fa1451d655f59916aec1c1e4fb17f19a78005066 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Tue, 26 Mar 2013 17:26:38 +0000
-Subject: [PATCH 004/806] Allow mac address to be set in smsc95xx
+Subject: [PATCH] Allow mac address to be set in smsc95xx
 
 Signed-off-by: popcornmix <popcornmix@gmail.com>
 ---

target/linux/brcm2708/patches-4.19/950-0005-Protect-__release_resource-against-resources-without.patch

@@ -1,7 +1,7 @@
 From 6209e42d384cfe873123b411a9bd170de027d4b5 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Fri, 13 Mar 2015 12:43:36 +0000
-Subject: [PATCH 005/806] Protect __release_resource against resources without
+Subject: [PATCH] Protect __release_resource against resources without
  parents
 
 Without this patch, removing a device tree overlay can crash here.

target/linux/brcm2708/patches-4.19/950-0006-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch

@@ -1,7 +1,7 @@
 From 5e9082be2fca137fe13b8af15aa0b9d178cd99c1 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Fri, 4 Dec 2015 17:41:50 +0000
-Subject: [PATCH 006/806] irq-bcm2836: Prevent spurious interrupts, and trap
+Subject: [PATCH] irq-bcm2836: Prevent spurious interrupts, and trap
  them early
 
 The old arch-specific IRQ macros included a dsb to ensure the

target/linux/brcm2708/patches-4.19/950-0007-irq-bcm2836-Avoid-Invalid-trigger-warning.patch

@@ -1,7 +1,7 @@
 From b8a56e2dbae7dbcc0537b03f8a99eb5ba638876b Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Thu, 9 Feb 2017 14:33:30 +0000
-Subject: [PATCH 007/806] irq-bcm2836: Avoid "Invalid trigger warning"
+Subject: [PATCH] irq-bcm2836: Avoid "Invalid trigger warning"
 
 Initialise the level for each IRQ to avoid a warning from the
 arm arch timer code.

target/linux/brcm2708/patches-4.19/950-0008-irqchip-bcm2835-Add-FIQ-support.patch

@@ -1,7 +1,7 @@
 From 9334b65d3020bca44aa2695b84eda865ecc340e2 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Fri, 12 Jun 2015 19:01:05 +0200
-Subject: [PATCH 008/806] irqchip: bcm2835: Add FIQ support
+Subject: [PATCH] irqchip: bcm2835: Add FIQ support
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.19/950-0009-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch

@@ -1,7 +1,7 @@
 From a2416a2926904e3a07bdb10b9cf3c7871e87583c Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Fri, 23 Oct 2015 16:26:55 +0200
-Subject: [PATCH 009/806] irqchip: irq-bcm2835: Add 2836 FIQ support
+Subject: [PATCH] irqchip: irq-bcm2835: Add 2836 FIQ support
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.19/950-0010-spi-bcm2835-Support-pin-groups-other-than-7-11.patch

@@ -1,7 +1,7 @@
 From 61ca6adb1fc93622bb85acc18b6ce4f620c8c690 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Wed, 24 Jun 2015 14:10:44 +0100
-Subject: [PATCH 011/806] spi-bcm2835: Support pin groups other than 7-11
+Subject: [PATCH] spi-bcm2835: Support pin groups other than 7-11
 
 The spi-bcm2835 driver automatically uses GPIO chip-selects due to
 some unreliability of the native ones. In doing so it chooses the

target/linux/brcm2708/patches-4.19/950-0010-spidev-Add-spidev-compatible-string-to-silence-warni.patch

@@ -1,21 +0,0 @@
-From e21d0b86f4a9c2c1f61e183e5dfcc1cf37058ca1 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Tue, 14 Jul 2015 10:26:09 +0100
-Subject: [PATCH 010/806] spidev: Add "spidev" compatible string to silence
- warning
-
-See: https://github.com/raspberrypi/linux/issues/1054
----
- drivers/spi/spidev.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/spi/spidev.c
-+++ b/drivers/spi/spidev.c
-@@ -670,6 +670,7 @@ static const struct of_device_id spidev_
- 	{ .compatible = "ge,achc" },
- 	{ .compatible = "semtech,sx1301" },
- 	{ .compatible = "siliconlabs,si3210" },
-+	{ .compatible = "spidev" },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, spidev_dt_ids);

target/linux/brcm2708/patches-4.19/950-0011-spi-bcm2835-Disable-forced-software-CS.patch

@@ -1,7 +1,7 @@
 From 2610aceda837370048f86b4af27852463c3b5a47 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Fri, 1 Jul 2016 22:09:24 +0100
-Subject: [PATCH 012/806] spi-bcm2835: Disable forced software CS
+Subject: [PATCH] spi-bcm2835: Disable forced software CS
 
 Select software CS in bcm2708_common.dtsi, and disable the automatic
 conversion in the driver to allow hardware CS to be re-enabled with an

target/linux/brcm2708/patches-4.19/950-0012-spi-bcm2835-Remove-unused-code.patch

@@ -1,7 +1,7 @@
 From 80dc41f5617db0dbe3e17a399603a50b91997c5b Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Tue, 8 Nov 2016 21:35:38 +0000
-Subject: [PATCH 013/806] spi-bcm2835: Remove unused code
+Subject: [PATCH] spi-bcm2835: Remove unused code
 
 ---
  drivers/spi/spi-bcm2835.c | 61 ---------------------------------------

target/linux/brcm2708/patches-4.19/950-0013-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch

@@ -1,7 +1,7 @@
 From 10d11b6b5410b9d31845efd23147fd08477a5151 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Sat, 3 Oct 2015 22:22:55 +0200
-Subject: [PATCH 014/806] dmaengine: bcm2835: Load driver early and support
+Subject: [PATCH] dmaengine: bcm2835: Load driver early and support
  legacy API
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8

target/linux/brcm2708/patches-4.19/950-0014-firmware-Updated-mailbox-header.patch

@@ -1,7 +1,7 @@
 From e00fde59167c31cf376c74b333b58f011b244dfa Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Mon, 25 Jan 2016 17:25:12 +0000
-Subject: [PATCH 015/806] firmware: Updated mailbox header
+Subject: [PATCH] firmware: Updated mailbox header
 
 ---
  include/soc/bcm2835/raspberrypi-firmware.h | 5 +++++

target/linux/brcm2708/patches-4.19/950-0015-rtc-Add-SPI-alias-for-pcf2123-driver.patch

@@ -1,7 +1,7 @@
 From 3c8282fa8f1a50bf5ff5b83e83d97b37433bbdd9 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Wed, 15 Jun 2016 16:48:41 +0100
-Subject: [PATCH 016/806] rtc: Add SPI alias for pcf2123 driver
+Subject: [PATCH] rtc: Add SPI alias for pcf2123 driver
 
 Without this alias, Device Tree won't cause the driver
 to be loaded.

target/linux/brcm2708/patches-4.19/950-0016-watchdog-bcm2835-Support-setting-reboot-partition.patch

@@ -1,7 +1,7 @@
 From 8018869c6c8590018c1cd272475eda0dbf72a7ec Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Fri, 7 Oct 2016 16:50:59 +0200
-Subject: [PATCH 017/806] watchdog: bcm2835: Support setting reboot partition
+Subject: [PATCH] watchdog: bcm2835: Support setting reboot partition
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.19/950-0017-reboot-Use-power-off-rather-than-busy-spinning-when-.patch

@@ -1,7 +1,7 @@
 From c296f60b7a5b3c4f82aa0768030ebf64ab64792b Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Tue, 5 Apr 2016 19:40:12 +0100
-Subject: [PATCH 018/806] reboot: Use power off rather than busy spinning when
+Subject: [PATCH] reboot: Use power off rather than busy spinning when
  halt is requested
 
 ---

target/linux/brcm2708/patches-4.19/950-0018-bcm-Make-RASPBERRYPI_POWER-depend-on-PM.patch

@@ -1,7 +1,7 @@
 From f54671cb165da1c13d33777cd59329a464f9863b Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 9 Nov 2016 13:02:52 +0000
-Subject: [PATCH 019/806] bcm: Make RASPBERRYPI_POWER depend on PM
+Subject: [PATCH] bcm: Make RASPBERRYPI_POWER depend on PM
 
 ---
  drivers/soc/bcm/Kconfig | 1 +

target/linux/brcm2708/patches-4.19/950-0019-Register-the-clocks-early-during-the-boot-process-so.patch

@@ -1,7 +1,7 @@
 From 05caac5f388bf0b821d4a75e480a74ae40fc8478 Mon Sep 17 00:00:00 2001
 From: Martin Sperl <kernel@martin.sperl.org>
 Date: Fri, 2 Sep 2016 16:45:27 +0100
-Subject: [PATCH 020/806] Register the clocks early during the boot process, so
+Subject: [PATCH] Register the clocks early during the boot process, so
  that special/critical clocks can get enabled early on in the boot process
  avoiding the risk of disabling a clock, pll_divider or pll when a claiming
  driver fails to install propperly - maybe it needs to defer.

target/linux/brcm2708/patches-4.19/950-0020-bcm2835-rng-Avoid-initialising-if-already-enabled.patch

@@ -1,7 +1,7 @@
 From d5df60f32f3c3b2f7f6d758ac08de6acb9fd947f Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Tue, 6 Dec 2016 17:05:39 +0000
-Subject: [PATCH 021/806] bcm2835-rng: Avoid initialising if already enabled
+Subject: [PATCH] bcm2835-rng: Avoid initialising if already enabled
 
 Avoids the 0x40000 cycles of warmup again if firmware has already used it
 ---

target/linux/brcm2708/patches-4.19/950-0021-kbuild-Ignore-dtco-targets-when-filtering-symbols.patch

@@ -1,7 +1,7 @@
 From 3437db6e19e29ff9b6d2eef9a5ee703f04ca1d41 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Wed, 24 Aug 2016 16:28:44 +0100
-Subject: [PATCH 022/806] kbuild: Ignore dtco targets when filtering symbols
+Subject: [PATCH] kbuild: Ignore dtco targets when filtering symbols
 
 ---
  scripts/Kbuild.include | 2 +-

target/linux/brcm2708/patches-4.19/950-0022-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch

@@ -1,7 +1,7 @@
 From f1f199b682e258674137105f49d033cb81612ab7 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Mon, 13 Feb 2017 17:20:08 +0000
-Subject: [PATCH 023/806] clk-bcm2835: Mark used PLLs and dividers CRITICAL
+Subject: [PATCH] clk-bcm2835: Mark used PLLs and dividers CRITICAL
 
 The VPU configures and relies on several PLLs and dividers. Mark all
 enabled dividers and their PLLs as CRITICAL to prevent the kernel from

target/linux/brcm2708/patches-4.19/950-0023-clk-bcm2835-Add-claim-clocks-property.patch

@@ -1,7 +1,7 @@
 From 787234827719aa1d44b079969419d91b665a491d Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Mon, 13 Feb 2017 17:20:08 +0000
-Subject: [PATCH 024/806] clk-bcm2835: Add claim-clocks property
+Subject: [PATCH] clk-bcm2835: Add claim-clocks property
 
 The claim-clocks property can be used to prevent PLLs and dividers
 from being marked as critical. It contains a vector of clock IDs,

target/linux/brcm2708/patches-4.19/950-0024-clk-bcm2835-Read-max-core-clock-from-firmware.patch

@@ -1,7 +1,7 @@
 From f8e7e4a65b3f99452db67cfb7e21afc80b8af7f2 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Mon, 6 Mar 2017 09:06:18 +0000
-Subject: [PATCH 025/806] clk-bcm2835: Read max core clock from firmware
+Subject: [PATCH] clk-bcm2835: Read max core clock from firmware
 
 The VPU is responsible for managing the core clock, usually under
 direction from the bcm2835-cpufreq driver but not via the clk-bcm2835

target/linux/brcm2708/patches-4.19/950-0025-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch

@@ -1,7 +1,7 @@
 From 6272fd1e55945522b156a28c1f605b69ae6e05b7 Mon Sep 17 00:00:00 2001
 From: Eric Anholt <eric@anholt.net>
 Date: Mon, 9 May 2016 17:28:18 -0700
-Subject: [PATCH 026/806] clk: bcm2835: Mark GPIO clocks enabled at boot as
+Subject: [PATCH] clk: bcm2835: Mark GPIO clocks enabled at boot as
  critical.
 
 These divide off of PLLD_PER and are used for the ethernet and wifi

target/linux/brcm2708/patches-4.19/950-0026-sound-Demote-deferral-errors-to-INFO-level.patch

@@ -1,7 +1,7 @@
 From fd613a5d5dc7f023d7d983aee9d854fd3a41d669 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Thu, 9 Feb 2017 14:36:44 +0000
-Subject: [PATCH 027/806] sound: Demote deferral errors to INFO level
+Subject: [PATCH] sound: Demote deferral errors to INFO level
 
 At present there is no mechanism to specify driver load order,
 which can lead to deferrals and repeated retries until successful.

target/linux/brcm2708/patches-4.19/950-0027-Update-vfpmodule.c.patch

@@ -1,7 +1,7 @@
 From 0eb679e4b41dab1e421415917feae44d00e1687f Mon Sep 17 00:00:00 2001
 From: Claggy3 <stephen.maclagan@hotmail.com>
 Date: Sat, 11 Feb 2017 14:00:30 +0000
-Subject: [PATCH 028/806] Update vfpmodule.c
+Subject: [PATCH] Update vfpmodule.c
 
 Christopher Alexander Tobias Schulze - May 2, 2015, 11:57 a.m.
 This patch fixes a problem with VFP state save and restore related

target/linux/brcm2708/patches-4.19/950-0028-i2c-bcm2835-Add-debug-support.patch

@@ -1,7 +1,7 @@
 From b6494e2070983020d56f82d9d0be74d11b001823 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Tue, 1 Nov 2016 15:15:41 +0100
-Subject: [PATCH 029/806] i2c: bcm2835: Add debug support
+Subject: [PATCH] i2c: bcm2835: Add debug support
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.19/950-0029-mm-Remove-the-PFN-busy-warning.patch

@@ -1,7 +1,7 @@
 From a8a5ad555b7168ce90263395dc5f26b99af9bf4e Mon Sep 17 00:00:00 2001
 From: Eric Anholt <eric@anholt.net>
 Date: Thu, 18 Dec 2014 16:07:15 -0800
-Subject: [PATCH 030/806] mm: Remove the PFN busy warning
+Subject: [PATCH] mm: Remove the PFN busy warning
 
 See commit dae803e165a11bc88ca8dbc07a11077caf97bbcb -- the warning is
 expected sometimes when using CMA.  However, that commit still spams

target/linux/brcm2708/patches-4.19/950-0030-ASoC-Add-prompt-for-ICS43432-codec.patch

@@ -1,7 +1,7 @@
 From e4cd2b482eadc7f7901ba6c0df3080f792c4d655 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Thu, 23 Mar 2017 10:06:56 +0000
-Subject: [PATCH 031/806] ASoC: Add prompt for ICS43432 codec
+Subject: [PATCH] ASoC: Add prompt for ICS43432 codec
 
 Without a prompt string, a config setting can't be included in a
 defconfig. Give CONFIG_SND_SOC_ICS43432 a prompt so that Pi soundcards

target/linux/brcm2708/patches-4.19/950-0031-irqchip-irq-bcm2836-Remove-regmap-and-syscon-use.patch

@@ -1,7 +1,7 @@
 From f1905bc5137db49ef155f835d52d68cb86c4c9a9 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Tue, 23 Jan 2018 16:52:45 +0000
-Subject: [PATCH 032/806] irqchip: irq-bcm2836: Remove regmap and syscon use
+Subject: [PATCH] irqchip: irq-bcm2836: Remove regmap and syscon use
 
 The syscon node defines a register range that duplicates that used by
 the local_intc node on bcm2836/7. Since irq-bcm2835 and irq-bcm2836 are

target/linux/brcm2708/patches-4.19/950-0032-lan78xx-Enable-LEDs-and-auto-negotiation.patch

@@ -1,7 +1,7 @@
 From 645eb2cf211c04496c9f5daca23ab16ce796b0df Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Tue, 17 Oct 2017 15:04:29 +0100
-Subject: [PATCH 033/806] lan78xx: Enable LEDs and auto-negotiation
+Subject: [PATCH] lan78xx: Enable LEDs and auto-negotiation
 
 For applications of the LAN78xx that don't have valid programmed
 EEPROMs or OTPs, enabling both LEDs and auto-negotiation by default
@@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/net/usb/lan78xx.c
 +++ b/drivers/net/usb/lan78xx.c
-@@ -2475,6 +2475,11 @@ static int lan78xx_reset(struct lan78xx_
+@@ -2476,6 +2476,11 @@ static int lan78xx_reset(struct lan78xx_
  	int ret = 0;
  	unsigned long timeout;
  	u8 sig;
@@ -26,7 +26,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  
  	ret = lan78xx_read_reg(dev, HW_CFG, &buf);
  	buf |= HW_CFG_LRST_;
-@@ -2528,6 +2533,9 @@ static int lan78xx_reset(struct lan78xx_
+@@ -2529,6 +2534,9 @@ static int lan78xx_reset(struct lan78xx_
  
  	ret = lan78xx_read_reg(dev, HW_CFG, &buf);
  	buf |= HW_CFG_MEF_;
@@ -36,7 +36,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	ret = lan78xx_write_reg(dev, HW_CFG, buf);
  
  	ret = lan78xx_read_reg(dev, USB_CFG0, &buf);
-@@ -2583,6 +2591,9 @@ static int lan78xx_reset(struct lan78xx_
+@@ -2584,6 +2592,9 @@ static int lan78xx_reset(struct lan78xx_
  			buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_;
  		}
  	}

target/linux/brcm2708/patches-4.19/950-0033-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch

@@ -1,7 +1,7 @@
 From c048d8c7b1ae0d56d9ee1bca2be8cc9da5a43bba Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Tue, 23 Feb 2016 17:26:48 +0000
-Subject: [PATCH 034/806] amba_pl011: Don't use DT aliases for numbering
+Subject: [PATCH] amba_pl011: Don't use DT aliases for numbering
 
 The pl011 driver looks for DT aliases of the form "serial<n>",
 and if found uses <n> as the device ID. This can cause

target/linux/brcm2708/patches-4.19/950-0034-amba_pl011-Round-input-clock-up.patch

@@ -1,7 +1,7 @@
 From 610cb34f3d7c5fdffb0db82538731714a2df1d13 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Wed, 1 Mar 2017 16:07:39 +0000
-Subject: [PATCH 035/806] amba_pl011: Round input clock up
+Subject: [PATCH] amba_pl011: Round input clock up
 
 The UART clock is initialised to be as close to the requested
 frequency as possible without exceeding it. Now that there is a

target/linux/brcm2708/patches-4.19/950-0035-amba_pl011-Insert-mb-for-correct-FIFO-handling.patch

@@ -1,7 +1,7 @@
 From 76627df3e5f0513118dac20710766f97fc5ca32d Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Fri, 29 Sep 2017 10:32:19 +0100
-Subject: [PATCH 036/806] amba_pl011: Insert mb() for correct FIFO handling
+Subject: [PATCH] amba_pl011: Insert mb() for correct FIFO handling
 
 The pl011 register accessor functions use the _relaxed versions of the
 standard readl() and writel() functions, meaning that there are no

target/linux/brcm2708/patches-4.19/950-0036-amba_pl011-Add-cts-event-workaround-DT-property.patch

@@ -1,7 +1,7 @@
 From 17a4507175ca6018ea40e91c9d753bc39f043d99 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Fri, 29 Sep 2017 10:32:19 +0100
-Subject: [PATCH 037/806] amba_pl011: Add cts-event-workaround DT property
+Subject: [PATCH] amba_pl011: Add cts-event-workaround DT property
 
 The BCM2835 PL011 implementation seems to have a bug that can lead to a
 transmission lockup if CTS changes frequently. A workaround was added to

target/linux/brcm2708/patches-4.19/950-0037-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch

@@ -1,7 +1,7 @@
 From 491316e4e140152fb6c66fa99716450bb13ea49a Mon Sep 17 00:00:00 2001
 From: notro <notro@tronnes.org>
 Date: Thu, 10 Jul 2014 13:59:47 +0200
-Subject: [PATCH 038/806] pinctrl-bcm2835: Set base to 0 give expected gpio
+Subject: [PATCH] pinctrl-bcm2835: Set base to 0 give expected gpio
  numbering
 
 Signed-off-by: Noralf Tronnes <notro@tronnes.org>

target/linux/brcm2708/patches-4.19/950-0038-Main-bcm2708-bcm2709-linux-port.patch

@@ -1,7 +1,7 @@
 From b37c8c275b90b3730ad99b0e96ae5e36895b26e8 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Sun, 12 May 2013 12:24:19 +0100
-Subject: [PATCH 039/806] Main bcm2708/bcm2709 linux port
+Subject: [PATCH] Main bcm2708/bcm2709 linux port
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.19/950-0039-Add-dwc_otg-driver.patch

@@ -1,7 +1,7 @@
 From e30ea17381a5381b1d764da094a56d5cb0c9d636 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 1 May 2013 19:46:17 +0100
-Subject: [PATCH 040/806] Add dwc_otg driver
+Subject: [PATCH] Add dwc_otg driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.19/950-0040-bcm2708-framebuffer-driver.patch

@@ -1,7 +1,7 @@
 From 7be9aaefa159fe6e59064e2a90195a63cc88352a Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 17 Jun 2015 17:06:34 +0100
-Subject: [PATCH 041/806] bcm2708 framebuffer driver
+Subject: [PATCH] bcm2708 framebuffer driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.19/950-0041-Speed-up-console-framebuffer-imageblit-function.patch

@@ -1,7 +1,7 @@
 From f4489532d7a73ded68e1b8a815a71b0fe25e9e21 Mon Sep 17 00:00:00 2001
 From: Harm Hanemaaijer <fgenfb@yahoo.com>
 Date: Thu, 20 Jun 2013 20:21:39 +0200
-Subject: [PATCH 042/806] Speed up console framebuffer imageblit function
+Subject: [PATCH] Speed up console framebuffer imageblit function
 
 Especially on platforms with a slower CPU but a relatively high
 framebuffer fill bandwidth, like current ARM devices, the existing

target/linux/brcm2708/patches-4.19/950-0042-dmaengine-Add-support-for-BCM2708.patch

@@ -1,7 +1,7 @@
 From 9405d98a5b9ad11e9be2dc1247de3e26896a00d9 Mon Sep 17 00:00:00 2001
 From: Florian Meier <florian.meier@koalo.de>
 Date: Fri, 22 Nov 2013 14:22:53 +0100
-Subject: [PATCH 043/806] dmaengine: Add support for BCM2708
+Subject: [PATCH] dmaengine: Add support for BCM2708
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.19/950-0043-MMC-added-alternative-MMC-driver.patch

@@ -1,7 +1,7 @@
 From 74f3233f6ed4298983348b2ba5a500f955703953 Mon Sep 17 00:00:00 2001
 From: gellert <gellert@raspberrypi.org>
 Date: Fri, 15 Aug 2014 16:35:06 +0100
-Subject: [PATCH 044/806] MMC: added alternative MMC driver
+Subject: [PATCH] MMC: added alternative MMC driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
@@ -125,7 +125,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static inline int mmc_blk_part_switch(struct mmc_card *card,
  				      unsigned int part_type);
  
-@@ -2913,6 +2920,7 @@ static int mmc_blk_probe(struct mmc_card
+@@ -2876,6 +2883,7 @@ static int mmc_blk_probe(struct mmc_card
  {
  	struct mmc_blk_data *md, *part_md;
  	char cap_str[10];
@@ -133,7 +133,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  
  	/*
  	 * Check that the card supports the command class(es) we need.
-@@ -2920,7 +2928,16 @@ static int mmc_blk_probe(struct mmc_card
+@@ -2883,7 +2891,16 @@ static int mmc_blk_probe(struct mmc_card
  	if (!(card->csd.cmdclass & CCC_BLOCK_READ))
  		return -ENODEV;
  
@@ -151,7 +151,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  
  	card->complete_wq = alloc_workqueue("mmc_complete",
  					WQ_MEM_RECLAIM | WQ_HIGHPRI, 0);
-@@ -2935,9 +2952,14 @@ static int mmc_blk_probe(struct mmc_card
+@@ -2898,9 +2915,14 @@ static int mmc_blk_probe(struct mmc_card
  
  	string_get_size((u64)get_capacity(md->disk), 512, STRING_UNITS_2,
  			cap_str, sizeof(cap_str));

target/linux/brcm2708/patches-4.19/950-0044-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch

@@ -1,7 +1,7 @@
 From 5fcaebde5b5cd58630ea70bbfe0c62f8229469c5 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Wed, 25 Mar 2015 17:49:47 +0000
-Subject: [PATCH 045/806] Adding bcm2835-sdhost driver, and an overlay to
+Subject: [PATCH] Adding bcm2835-sdhost driver, and an overlay to
  enable it
 
 BCM2835 has two SD card interfaces. This driver uses the other one.

target/linux/brcm2708/patches-4.19/950-0045-vc_mem-Add-vc_mem-driver-for-querying-firmware-memor.patch

@@ -1,7 +1,7 @@
 From cfdf39199781b73840dfdfb7d1281b398c1334cf Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Fri, 28 Oct 2016 15:36:43 +0100
-Subject: [PATCH 046/806] vc_mem: Add vc_mem driver for querying firmware
+Subject: [PATCH] vc_mem: Add vc_mem driver for querying firmware
  memory addresses
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8

target/linux/brcm2708/patches-4.19/950-0046-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch

@@ -1,7 +1,7 @@
 From 6f27d1904c3f46e00388b1603ceed359387349d2 Mon Sep 17 00:00:00 2001
 From: Tim Gover <tgover@broadcom.com>
 Date: Tue, 22 Jul 2014 15:41:04 +0100
-Subject: [PATCH 047/806] vcsm: VideoCore shared memory service for BCM2835
+Subject: [PATCH] vcsm: VideoCore shared memory service for BCM2835
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.19/950-0047-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch

@@ -1,7 +1,7 @@
 From cff179ff275e8f7849384ad2876c9a3237eeac79 Mon Sep 17 00:00:00 2001
 From: Luke Wren <luke@raspberrypi.org>
 Date: Fri, 21 Aug 2015 23:14:48 +0100
-Subject: [PATCH 048/806] Add /dev/gpiomem device for rootless user GPIO access
+Subject: [PATCH] Add /dev/gpiomem device for rootless user GPIO access
 
 Signed-off-by: Luke Wren <luke@raspberrypi.org>
 

target/linux/brcm2708/patches-4.19/950-0048-Add-SMI-driver.patch

@@ -1,7 +1,7 @@
 From 9c81a1d5224e50e6ec45b8d0c97026a5dc800853 Mon Sep 17 00:00:00 2001
 From: Luke Wren <wren6991@gmail.com>
 Date: Sat, 5 Sep 2015 01:14:45 +0100
-Subject: [PATCH 049/806] Add SMI driver
+Subject: [PATCH] Add SMI driver
 
 Signed-off-by: Luke Wren <wren6991@gmail.com>
 ---

target/linux/brcm2708/patches-4.19/950-0049-MISC-bcm2835-smi-use-clock-manager-and-fix-reload-is.patch

@@ -1,7 +1,7 @@
 From f7cccb2e66f0187f69a432536f227b32a458f94b Mon Sep 17 00:00:00 2001
 From: Martin Sperl <kernel@martin.sperl.org>
 Date: Tue, 26 Apr 2016 14:59:21 +0000
-Subject: [PATCH 050/806] MISC: bcm2835: smi: use clock manager and fix reload
+Subject: [PATCH] MISC: bcm2835: smi: use clock manager and fix reload
  issues
 
 Use clock manager instead of self-made clockmanager.

target/linux/brcm2708/patches-4.19/950-0050-Add-SMI-NAND-driver.patch

@@ -1,7 +1,7 @@
 From 06d1fce502f478f7e554c591a68cd42cc861e976 Mon Sep 17 00:00:00 2001
 From: Luke Wren <wren6991@gmail.com>
 Date: Sat, 5 Sep 2015 01:16:10 +0100
-Subject: [PATCH 051/806] Add SMI NAND driver
+Subject: [PATCH] Add SMI NAND driver
 
 Signed-off-by: Luke Wren <wren6991@gmail.com>
 ---

target/linux/brcm2708/patches-4.19/950-0051-Add-cpufreq-driver.patch

@@ -1,7 +1,7 @@
 From 0a248af6e18d7f1ad57fffa7f588bc8a5851832e Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 3 Jul 2013 00:49:20 +0100
-Subject: [PATCH 052/806] Add cpufreq driver
+Subject: [PATCH] Add cpufreq driver
 
 Signed-off-by: popcornmix <popcornmix@gmail.com>
 

target/linux/brcm2708/patches-4.19/950-0052-Add-Chris-Boot-s-i2c-driver.patch

@@ -1,7 +1,7 @@
 From 1f72dfe2738305c57605a8192176117e1641779c Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 17 Jun 2015 15:44:08 +0100
-Subject: [PATCH 053/806] Add Chris Boot's i2c driver
+Subject: [PATCH] Add Chris Boot's i2c driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.19/950-0053-char-broadcom-Add-vcio-module.patch

@@ -1,7 +1,7 @@
 From 6e169c17c0de4503264186d90aa51639924c6e9c Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Fri, 26 Jun 2015 14:27:06 +0200
-Subject: [PATCH 054/806] char: broadcom: Add vcio module
+Subject: [PATCH] char: broadcom: Add vcio module
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.19/950-0054-firmware-bcm2835-Support-ARCH_BCM270x.patch

@@ -1,7 +1,7 @@
 From 6f190ee10a1d3276450e6190bb6d75a03040dcef Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
 Date: Fri, 26 Jun 2015 14:25:01 +0200
-Subject: [PATCH 055/806] firmware: bcm2835: Support ARCH_BCM270x
+Subject: [PATCH] firmware: bcm2835: Support ARCH_BCM270x
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.19/950-0055-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch

@@ -1,7 +1,7 @@
 From 28951ab97e67b20640b183364d2396e91e8a6148 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Mon, 11 May 2015 09:00:42 +0100
-Subject: [PATCH 056/806] scripts: Add mkknlimg and knlinfo scripts from tools
+Subject: [PATCH] scripts: Add mkknlimg and knlinfo scripts from tools
  repo
 
 The Raspberry Pi firmware looks for a trailer on the kernel image to

target/linux/brcm2708/patches-4.19/950-0056-BCM2708-Add-core-Device-Tree-support.patch

@@ -1,7 +1,7 @@
 From d04105f6d48f160f4b7ab874ed7f878c2b84b466 Mon Sep 17 00:00:00 2001
 From: notro <notro@tronnes.org>
 Date: Wed, 9 Jul 2014 14:46:08 +0200
-Subject: [PATCH 057/806] BCM2708: Add core Device Tree support
+Subject: [PATCH] BCM2708: Add core Device Tree support
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.19/950-0057-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch

@@ -1,7 +1,7 @@
 From 7181db1685aa67e127f80fe9607270d3c87aa3b9 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Fri, 6 Feb 2015 13:50:57 +0000
-Subject: [PATCH 058/806] BCM270x_DT: Add pwr_led, and the required "input"
+Subject: [PATCH] BCM270x_DT: Add pwr_led, and the required "input"
  trigger
 
 The "input" trigger makes the associated GPIO an input.  This is to support

target/linux/brcm2708/patches-4.19/950-0058-fbdev-add-FBIOCOPYAREA-ioctl.patch

@@ -1,7 +1,7 @@
 From 5269119dadfc6874aec51fed4468c73f1b0187a2 Mon Sep 17 00:00:00 2001
 From: Siarhei Siamashka <siarhei.siamashka@gmail.com>
 Date: Mon, 17 Jun 2013 13:32:11 +0300
-Subject: [PATCH 059/806] fbdev: add FBIOCOPYAREA ioctl
+Subject: [PATCH] fbdev: add FBIOCOPYAREA ioctl
 
 Based on the patch authored by Ali Gholami Rudi at
     https://lkml.org/lkml/2009/7/13/153

target/linux/brcm2708/patches-4.19/950-0059-Added-Device-IDs-for-August-DVB-T-205.patch

@@ -1,7 +1,7 @@
 From 298368d476283829d222cb974491ac313605ed69 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Wed, 3 Jul 2013 00:54:08 +0100
-Subject: [PATCH 060/806] Added Device IDs for August DVB-T 205
+Subject: [PATCH] Added Device IDs for August DVB-T 205
 
 ---
  drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 4 ++++

target/linux/brcm2708/patches-4.19/950-0060-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch

@@ -1,7 +1,7 @@
 From 8137201823bd2ed1b3951220f29fdc9555c3c6de Mon Sep 17 00:00:00 2001
 From: Gordon Hollingworth <gordon@raspberrypi.org>
 Date: Tue, 12 May 2015 14:47:56 +0100
-Subject: [PATCH 061/806] rpi-ft5406: Add touchscreen driver for pi LCD display
+Subject: [PATCH] rpi-ft5406: Add touchscreen driver for pi LCD display
 
 Fix driver detection failure Check that the buffer response is non-zero meaning the touchscreen was detected
 

target/linux/brcm2708/patches-4.19/950-0061-Improve-__copy_to_user-and-__copy_from_user-performa.patch

@@ -1,7 +1,7 @@
 From e4d81adf1f2c84b229901cddb403d00010524b28 Mon Sep 17 00:00:00 2001
 From: popcornmix <popcornmix@gmail.com>
 Date: Mon, 28 Nov 2016 16:50:04 +0000
-Subject: [PATCH 062/806] Improve __copy_to_user and __copy_from_user
+Subject: [PATCH] Improve __copy_to_user and __copy_from_user
  performance
 
 Provide a __copy_from_user that uses memcpy. On BCM2708, use

target/linux/brcm2708/patches-4.19/950-0062-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch

@@ -1,7 +1,7 @@
 From 84cd61bdf5fe5ecf70ad88e60e07879cbde2d4a6 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <phil@raspberrypi.org>
 Date: Thu, 25 Jun 2015 12:16:11 +0100
-Subject: [PATCH 063/806] gpio-poweroff: Allow it to work on Raspberry Pi
+Subject: [PATCH] gpio-poweroff: Allow it to work on Raspberry Pi
 
 The Raspberry Pi firmware manages the power-down and reboot
 process. To do this it installs a pm_power_off handler, causing

target/linux/brcm2708/patches-4.19/950-0063-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch

@@ -1,7 +1,7 @@
 From 0d63b8a00c925eb02093e9ed4866c4a0d9209a00 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <pelwell@users.noreply.github.com>
 Date: Tue, 14 Jul 2015 14:32:47 +0100
-Subject: [PATCH 064/806] mfd: Add Raspberry Pi Sense HAT core driver
+Subject: [PATCH] mfd: Add Raspberry Pi Sense HAT core driver
 
 ---
  drivers/input/joystick/Kconfig           |   8 +

target/linux/brcm2708/patches-4.19/950-0064-ASoC-pcm512x-implement-set_tdm_slot-interface.patch

@@ -1,7 +1,7 @@
 From 5fd7bb26ef791a7da1c0573b980ab4fe6b9c2641 Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <hias@horus.com>
 Date: Thu, 22 Feb 2018 11:55:06 +0100
-Subject: [PATCH 065/806] ASoC: pcm512x: implement set_tdm_slot interface
+Subject: [PATCH] ASoC: pcm512x: implement set_tdm_slot interface
 
 PCM512x can accept data padded with additional BCLK cycles
 but the driver currently lacks an interface to configure this.

target/linux/brcm2708/patches-4.19/950-0065-ASoC-Add-support-for-Rpi-DAC.patch

@@ -1,7 +1,7 @@
 From 13ddc845b271d7cc79bcbdd288f95c03ea927b89 Mon Sep 17 00:00:00 2001
 From: Florian Meier <florian.meier@koalo.de>
 Date: Mon, 25 Jan 2016 15:48:59 +0000
-Subject: [PATCH 066/806] ASoC: Add support for Rpi-DAC
+Subject: [PATCH] ASoC: Add support for Rpi-DAC
 
 ---
  sound/soc/codecs/Kconfig    |  5 +++

target/linux/brcm2708/patches-4.19/950-0066-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch

@@ -1,7 +1,7 @@
 From 76c252645ad542bd35ce52230635f36e3c0f730d Mon Sep 17 00:00:00 2001
 From: Gordon Garrity <gordon@iqaudio.com>
 Date: Sat, 8 Mar 2014 16:56:57 +0000
-Subject: [PATCH 067/806] Add IQaudIO Sound Card support for Raspberry Pi
+Subject: [PATCH] Add IQaudIO Sound Card support for Raspberry Pi
 
 Set a limit of 0dB on Digital Volume Control
 

target/linux/brcm2708/patches-4.19/950-0067-Added-support-for-HiFiBerry-DAC.patch

@@ -1,7 +1,7 @@
 From 86d09076abd36ad87477c21f7b33c90cb696e196 Mon Sep 17 00:00:00 2001
 From: Daniel Matuschek <info@crazy-audio.com>
 Date: Mon, 4 Aug 2014 10:06:56 +0200
-Subject: [PATCH 068/806] Added support for HiFiBerry DAC+
+Subject: [PATCH] Added support for HiFiBerry DAC+
 
 The driver is based on the HiFiBerry DAC driver. However HiFiBerry DAC+ uses
 a different codec chip (PCM5122), therefore a new driver is necessary.

target/linux/brcm2708/patches-4.19/950-0068-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch

@@ -1,7 +1,7 @@
 From a1344150b31e3b9592f76df8f453a15565a8390a Mon Sep 17 00:00:00 2001
 From: Daniel Matuschek <info@crazy-audio.com>
 Date: Mon, 4 Aug 2014 11:09:58 +0200
-Subject: [PATCH 069/806] Added driver for HiFiBerry Amp amplifier add-on board
+Subject: [PATCH] Added driver for HiFiBerry Amp amplifier add-on board
 
 The driver contains a low-level hardware driver for the TAS5713 and the
 drivers for the Raspberry Pi I2S subsystem.

target/linux/brcm2708/patches-4.19/950-0069-Add-driver-for-rpi-proto.patch

@@ -1,7 +1,7 @@
 From bf4dee727fc7c72e250784e8e3e681f9d11bbdc1 Mon Sep 17 00:00:00 2001
 From: Waldemar Brodkorb <wbrodkorb@conet.de>
 Date: Wed, 25 Mar 2015 09:26:17 +0100
-Subject: [PATCH 070/806] Add driver for rpi-proto
+Subject: [PATCH] Add driver for rpi-proto
 
 Forward port of 3.10.x driver from https://github.com/koalo
 We are using a custom board and would like to use rpi 3.18.x

target/linux/brcm2708/patches-4.19/950-0070-Add-Support-for-JustBoom-Audio-boards.patch

@@ -1,7 +1,7 @@
 From 0435c03e212129e384cd49b19fca7a55dbf1ec50 Mon Sep 17 00:00:00 2001
 From: Aaron Shaw <shawaj@gmail.com>
 Date: Thu, 7 Apr 2016 21:26:21 +0100
-Subject: [PATCH 071/806] Add Support for JustBoom Audio boards
+Subject: [PATCH] Add Support for JustBoom Audio boards
 
 justboom-dac: Adjust for ALSA API change
 

target/linux/brcm2708/patches-4.19/950-0071-New-AudioInjector.net-Pi-soundcard-with-low-jitter-a.patch

@@ -1,7 +1,7 @@
 From 3f06b2f7c04d263a3bb0569e6f2c341549c21154 Mon Sep 17 00:00:00 2001
 From: Matt Flax <flatmax@flatmax.org>
 Date: Mon, 16 May 2016 21:36:31 +1000
-Subject: [PATCH 072/806] New AudioInjector.net Pi soundcard with low jitter
+Subject: [PATCH] New AudioInjector.net Pi soundcard with low jitter
  audio in and out.
 
 Contains the sound/soc/bcm ALSA machine driver and necessary alterations to the Kconfig and Makefile.

target/linux/brcm2708/patches-4.19/950-0072-New-driver-for-RRA-DigiDAC1-soundcard-using-WM8741-W.patch

@@ -1,7 +1,7 @@
 From 13efe81b4ab9321290d6973e90d00b7caf37b47f Mon Sep 17 00:00:00 2001
 From: escalator2015 <jmtasende@gmail.com>
 Date: Tue, 24 May 2016 16:20:09 +0100
-Subject: [PATCH 073/806] New driver for RRA DigiDAC1 soundcard using WM8741 +
+Subject: [PATCH] New driver for RRA DigiDAC1 soundcard using WM8741 +
  WM8804
 
 ---

target/linux/brcm2708/patches-4.19/950-0073-Add-support-for-Dion-Audio-LOCO-DAC-AMP-HAT.patch

@@ -1,7 +1,7 @@
 From 234b6a3cfd5bc1fb341c01f8ac773956f5af42cd Mon Sep 17 00:00:00 2001
 From: DigitalDreamtime <clive.messer@digitaldreamtime.co.uk>
 Date: Sat, 2 Jul 2016 16:26:19 +0100
-Subject: [PATCH 074/806] Add support for Dion Audio LOCO DAC-AMP HAT
+Subject: [PATCH] Add support for Dion Audio LOCO DAC-AMP HAT
 
 Using dedicated machine driver and pcm5102a codec driver.
 

target/linux/brcm2708/patches-4.19/950-0074-Allo-Piano-DAC-boards-Initial-2-channel-stereo-suppo.patch

@@ -1,7 +1,7 @@
 From 4c4b1a565322382b927927d6066735c7cd1ea188 Mon Sep 17 00:00:00 2001
 From: Clive Messer <clive.m.messer@gmail.com>
 Date: Mon, 19 Sep 2016 14:01:04 +0100
-Subject: [PATCH 075/806] Allo Piano DAC boards: Initial 2 channel (stereo)
+Subject: [PATCH] Allo Piano DAC boards: Initial 2 channel (stereo)
  support (#1645)
 
 Add initial 2 channel (stereo) support for Allo Piano DAC (2.0/2.1) boards,