298977887/lede
1
0
Fork 0
mirror of https://github.com/coolsnowwolf/lede.git synced 2025-04-16 04:13:31 +00:00
Code Issues Packages Projects Releases Wiki Activity

ipq806x: Add support for Linksys E8350

Browse Source
This commit is contained in:
coolsnowwolf 2021-07-19 09:19:48 +08:00
parent 2848dc4722
commit f5e7d6cec5
7 changed files with 285 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ipq806x/base-files/etc/board.d/01_leds
View File

@ -21,6 +21,9 @@ edgecore,ecw5410)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt"
;;
linksys,e8350-v1)
ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:green:wifi" "phy0tpt"
;;
nec,wg2600hp)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt"

1
target/linux/ipq806x/base-files/etc/board.d/02_network
View File

@ -19,6 +19,7 @@ nec,wg2600hp)
;;
buffalo,wxr-2533dhp |\
compex,wpq864 |\
linksys,e8350-v1 |\
netgear,d7800 |\
netgear,r7500 |\
netgear,r7500v2 |\

3
target/linux/ipq806x/base-files/lib/upgrade/platform.sh
View File

@ -1,7 +1,7 @@
PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1
RAMFS_COPY_BIN='fw_printenv fw_setenv'
RAMFS_COPY_BIN='fw_printenv fw_setenv fwtool'
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
platform_check_image() {
@ -12,6 +12,7 @@ platform_do_upgrade() {
case "$(board_name)" in
askey,rt4230w-rev6 |\
compex,wpq864|\
linksys,e8350-v1|\
netgear,d7800 |\
netgear,r7500 |\
netgear,r7500v2 |\

246
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-e8350-v1.dts Normal file
View File

@ -0,0 +1,246 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Linksys EA8350 V1 WiFi Router";
compatible = "linksys,e8350-v1", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
aliases {
serial0 = &gsbi4_serial;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
wifi {
label = "wifi";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
};
nand-controller@1ac00000 {
compatible = "qcom,ipq806x-nand";
reg = <0x1ac00000 0x800>;
clocks = <&gcc EBI2_CLK>,
<&gcc EBI2_AON_CLK>;
clock-names = "core", "aon";
dmas = <&adm_dma 3>;
dma-names = "rxtx";
qcom,cmd-crci = <15>;
qcom,data-crci = <3>;
nand@0 {
reg = <0>;
nand-ecc-strength = <4>;
nand-bus-width = <8>;
partitions {
compatible = "fixed-partitions";
partition@0 {
label = "ubi";
reg = <0 0x4000000>;
};
partition@4000000 {
label = "extra";
reg = <0x4000000 0x4000000>;
};
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_power: power {
label = "e8350-v1:green:power";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wps {
label = "e8350-v1:green:wps";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
wifi {
label = "e8350-v1:green:wifi";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio68","gpio65", "gpio67";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio26","gpio53", "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
};
&gsbi4 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi5: spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
m25p80@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <51200000>;
reg = <0>;
partitions {
compatible = "qcom,smem";
};
};
};
};
&sata_phy {
status = "okay";
};
&sata {
status = "okay";
};
&usb3_0 {
clocks = <&gcc USB30_1_MASTER_CLK>;
status = "okay";
};
&usb3_1 {
clocks = <&gcc USB30_0_MASTER_CLK>;
status = "okay";
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
};
&pcie2 {
status = "okay";
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x00010 0x2613a0 /* PWS_REG */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&tcsr {
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
compatible = "qcom,tcsr";
};
&adm_dma {
status = "okay";
};

29
target/linux/ipq806x/image/Makefile
View File

@ -23,6 +23,17 @@ define Build/edimax-header
@mv $@.new $@
endef
# tune addpattern for Linksys E8350-V1 fw pattern generation
define Build/linksys-bin
$(STAGING_DIR_HOST)/bin/addpattern -p $(FW_DEVICE_ID) -v $(FW_VERSION) $(if $(SERIAL),-s $(SERIAL)) -i $@ -o $@.new
mv $@.new $@
endef
# Use Linksys fw header generator to upgrade openwrt factory image over the native Linksys WEB interface
define Build/linksys-addfwhdr
-$(STAGING_DIR_HOST)/bin/linksys/addfwhdr -i $@ -o $@.new \
;mv "$@.new" "$@"
endef
define Device/Default
PROFILES := Default
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
@ -174,6 +185,24 @@ define Device/linksys_ea7500-v1
endef
TARGET_DEVICES += linksys_ea7500-v1
define Device/linksys_e8350-v1
$(call Device/LegacyImage)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := E8350
DEVICE_VARIANT := v1
SOC := qcom-ipq8064
FW_VERSION := v1.0.03.003
FW_DEVICE_ID := 8350
PAGESIZE := 2048
BLOCKSIZE := 128k
KERNEL_IN_UBI := 1
IMAGES = factory.bin sysupgrade.ubi
IMAGE/sysupgrade.ubi := append-ubi | check-size 0x04000000 | append-metadata
IMAGE/factory.bin := append-ubi | check-size 0x04000000 | linksys-addfwhdr | linksys-bin
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct
endef
TARGET_DEVICES += linksys_e8350-v1
define Device/linksys_ea8500
$(call Device/LegacyImage)
DEVICE_VENDOR := Linksys

3
target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -907,8 +907,28 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -907,8 +907,29 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq4019-ap.dk04.1-c3.dtb \
qcom-ipq4019-ap.dk07.1-c1.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
@ -26,6 +26,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq8064-g10.dtb \
+ qcom-ipq8064-r7500.dtb \
+ qcom-ipq8064-r7500v2.dtb \
+ qcom-ipq8064-e8350-v1.dtb \
+ qcom-ipq8064-rg-mtfi-m520.dtb \
+ qcom-ipq8064-unifi-ac-hd.dtb \
+ qcom-ipq8064-wg2600hp.dtb \

3
target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -842,7 +842,27 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -842,7 +842,28 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq4019-ap.dk04.1-c3.dtb \
qcom-ipq4019-ap.dk07.1-c1.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
@ -21,6 +21,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq8064-db149.dtb \
+ qcom-ipq8064-ap161.dtb \
+ qcom-ipq8064-ea7500-v1.dtb \
+ qcom-ipq8064-e8350-v1.dtb \
+ qcom-ipq8064-ea8500.dtb \
+ qcom-ipq8064-g10.dtb \
+ qcom-ipq8064-r7500.dtb \