Bohdan Chubuk
d6318bba0f
generic: mtd: spinand: add support for F35SQA001G
...
Add support for FORESEE F35SQA001G SPI NAND.
Similar to F35SQA002G, but differs in capacity.
Datasheet:
- https://cdn.ozdisan.com/ETicaret_Dosya/704795_871495.pdf
Tested on Xiaomi AX3000T flashed with OpenWRT.
Signed-off-by: Bohdan Chubuk <chbgdn@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-12-14 22:40:08 +08:00
Bohdan Chubuk
79545017e8
generic: mtd: spinand: add support for F35SQA002G
...
Add support for FORESEE F35SQA002G SPI NAND.
Datasheet:
https://www.longsys.com/uploads/LM-00006FORESEEF35SQA002GDatasheet_1650183701.pdf
Refresh all affected patch with make target/linux/refresh.
Signed-off-by: Bohdan Chubuk <chbgdn@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-12-14 22:35:30 +08:00
aiamadeus
764b5a63d1
mediatek: add u-boot mod version for Cudy TR3000
2024-12-13 21:20:15 +08:00
Jianyu Zhuang
23a4c1fb90
mediatek: filogic: add support for Tenbay WR3000K
...
Tenbay WR3000K is an 802.11ax (Wi-Fi 6) router, based on MediaTek MT7981B.
- SoC: MetiaTek MT7981B
- RAM: Hynex H5TQ2G863GFR 512MiB
- Flash: Winbond W25N01GVZEIG 128MiB
- Wi-Fi: MediaTek MT7976C (2.4GHz/5GHz, 802.11ax, 2x2 MIMO, AX3000)
- MediaTek MT7915E: 2.4GHz and 5GHz
- Ethernet: 1x 10/100/1000 Mbps WAN + 3x 10/100/1000 Mbps LAN
- Switch: MediaTek MT7531AE
- UART: J4 (115200 baud)
- LEDs: Power
- Buttons: Reset, WPS
- PWR: 12V/1A DC, 5.5×2.1 connector
Signed-off-by: Jianyu Zhuang <xzjianyu@gmail.com>
2024-12-13 21:01:20 +08:00
Oleg S
21eb7bf2ae
mediatek: expand kernel size to 6MiB for Xiaomi AX6S
...
Expand kernel partition size on Xiaomi AX6S for the kernel larger than
4 MiB. Manual upgrade from OpenWRT to new OpenWRT:
cd /tmp
dd if=factory.bin bs=1M count=4 | mtd write - kernel
dd if=factory.bin bs=1M skip=4 count=2 | mtd write - ubi
dd if=factory.bin bs=1M skip=6 | mtd -p 2097152 write - ubi
Signed-off-by: Oleg S <remittor@gmail.com>
2024-12-12 21:18:25 +08:00
Luis Mita
41e0c30d82
mediatek: add Cudy TR3000 v1 support
...
Hardware:
- SoC: MediaTek MT7981B
- CPU: 2x 1.3 GHz Cortex-A53
- Flash: 128 MiB SPI NAND
- RAM: 512 MiB
- WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN, 802.11ax)
- Ethernet: 1x 10/100/1000/2500 Mbps WAN, 1x10/100/1000 Mbps LAN
- USB 3.0 port
- Buttons: 1 Reset button, 1 slider button
- LEDs: 1x Red, 1x White
- Serial console: internal test points, 115200 8n1
- Power: 5 VDC, 3 A
Installation:
The installation must be done via TFTP by disassembling the router.
On other occasions Cudy has distributed intermediate firmware to make
installation easier, and so I recommend checking the Wiki for this
device if there is a more convenient solution than the one below.
To install using TFTP:
1. Connect to UART.
2. With the router off, press the RESET button. While the router is turning
on, the button should continue to be pressed for at least 5 seconds.
3. A u-boot shell will automatically open.
4. Connect to LAN and set your IP to 192.168.1.88/24. Configure a
TFTP server and an OpenWrt initramfs-kernel.bin firmware file.
5. Run these steps in u-boot using the name of your file.
setenv bootfile initramfs-kernel.bin
tftpboot
bootm
6. If you can reach LuCI or SSH now, just use the sysupgrade image
with the 'Keep settings' option turned off.
Signed-off-by: Luis Mita <luis@luismita.com>
2024-12-10 17:30:36 +08:00
Beginner
da0bc37b19
kernel: bump 6.6 to 6.6.64 ( #13195 )
2024-12-10 10:10:12 +08:00
Beginner
e66ffaf37c
kernel: bump 6.1 to 6.1.119 ( #13185 )
2024-12-08 16:01:09 +08:00
Beginner
fd9b9cc78b
kernel: refresh 6.6 patches ( #13179 )
2024-12-07 15:13:57 +08:00
Beginner
d83ce75e31
kernel: refresh 6.12 patches ( #13178 )
2024-12-07 10:56:20 +08:00
coolsnowwolf
007d406efc
rockchip: refine fan speed for mmbox anas3035
2024-11-29 18:31:31 +08:00
Daniel Golle
efce6b6392
generic: 6.6: update block nvmem patchset
...
While discussions are still ongoing, update the block NVMEM provider
patchset to the level submitted upstream to allow testing and validation.
Link: https://patchwork.kernel.org/project/linux-block/list/?series=875202
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-11-27 22:01:05 +08:00
Álvaro Fernández Rojas
446d071896
generic: backport upstream r8169 patches
...
These patches have been added in linux v6.12 release.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-11-27 21:40:20 +08:00
John Audia
4d0b9caf5f
kernel: bump 6.6 to 6.6.63 ( #16997 )
...
Manually rebased:
bcm27xx/patches-6.6/950-0297-staging-vchiq_arm-Add-36-bit-address-support.patch
All other patches automatically rebased. Fix : #13121
Signed-off-by: John Audia <therealgraysky@proton.me>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-25 18:16:27 +08:00
aiamadeus
3d32cf1756
rockchip: fixes rk3588 usb3 init issue
2024-11-24 22:30:05 +08:00
coolsnowwolf
0a6ea7cfbf
rockchip: add support for MMBOX ANAS3035
2024-11-23 01:02:34 +08:00
coolsnowwolf
030f6f6ec6
rockchip: enable support for disk led trigger
2024-11-23 01:00:37 +08:00
coolsnowwolf
fd656efbc3
kernel: bump 6.6 to 6.6.63
2024-11-23 00:31:00 +08:00
coolsnowwolf
85d99596b4
generic: fix netfilter xtables NFLOG and MARK not load on IPv4 on linux 6.6
2024-11-22 23:57:01 +08:00
coolsnowwolf
26cc6f2a46
ipq807x: add Arcadyan AW1000 support
2024-11-22 21:59:04 +08:00
coolsnowwolf
0c80cdd186
rockchip: add ArmSoM Sige5 (RK3576, 8 Cores) board support
2024-11-22 12:50:27 +08:00
coolsnowwolf
ab8cac3519
rockchip: backport upstream rk3576 support for kernel 6.6
2024-11-22 10:57:43 +08:00
coolsnowwolf
6b5e1a552f
x86: add kconfig for linux 6.12
2024-11-21 14:25:25 +08:00
coolsnowwolf
53e61ac527
kernel: add linux kernel 6.12 support
2024-11-21 13:16:25 +08:00
coolsnowwolf
418c887452
generic: sync genlmsg_mcast patch with upstream with kernel 6.6.59+
2024-11-21 12:10:10 +08:00
aiamadeus
c74ed3282c
rockchip: add HINLINK H29K CPE Board
2024-11-20 22:26:09 +08:00
coolsnowwolf
44ac9994fe
rockchip: add NanoPi R2C Plus support
2024-11-19 12:30:32 +08:00
coolsnowwolf
bafb6af955
rockchip: move nanopi r2s plus dts to common dts files
2024-11-19 12:14:25 +08:00
coolsnowwolf
d72ea8c7b6
ramips: mt7621: fix Huasifei MT7621 DTU led status
2024-11-19 11:10:10 +08:00
coolsnowwolf
54aae07290
rockchip: Add support for FriendlyElec NanoPi R2S Plus
2024-11-18 22:09:35 +08:00
coolsnowwolf
655367c488
rockchip: add Radxa ROCK 5A support
2024-11-18 21:56:45 +08:00
coolsnowwolf
b743ccd20c
kernel: bump 5.15 to 5.15.173
2024-11-18 15:13:42 +08:00
coolsnowwolf
0004a5c57f
kernel: bump 6.6 to 6.6.62
2024-11-18 14:52:26 +08:00
coolsnowwolf
bdc94f7fd2
kernel: bump 6.1 to 6.1.117
2024-11-18 00:31:56 +08:00
coolsnowwolf
20b3f20e53
kernel: bump 6.6 to 6.6.61
2024-11-17 23:23:59 +08:00
Patryk Kowalczyk
4a7dd142ff
filogic: add support for ASUS TUF AX6000
...
Hardware
========
SOC: MediaTek MT7986
RAM: 512MB DDR3
FLASH: 256MB SPI-NAND
WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz 4T4R
ETH: MediaTek MT7530 Switch (LAN)
MaxLinear GPY211C 2.5 N-Base-T PHY (WAN)
MaxLinear GPY211C 2.5 N-Base-T PHY (LAN)
UART: 3V3 115200 8N1 (Do not connect VCC)
USB 3.1
Signed-off-by: Patryk Kowalczyk <patryk@kowalczyk.ws>
2024-11-17 21:01:20 +08:00
coolsnowwolf
8a28dd39d4
ipq60xx: add alt name to JDCloud routers
2024-11-17 16:16:06 +08:00
=?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?=
94c4c1331a
bcm27xx: switch default kernel to 6.6
...
Update default kernel version to 6.6 for the Raspberry Pi devices.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-11-17 16:06:03 +08:00
coolsnowwolf
0c5fee5ec2
mediatek: add BananaPi BPi-R3 mini
2024-11-16 18:20:10 +08:00
John Audia
44a23972ec
kernel: bump 6.6 to 6.6.60
...
All other patches automatically rebased.
Signed-off-by: John Audia <therealgraysky@proton.me>
Signed-off-by: Nick Hainke <vincent@systemli.org>
2024-11-15 16:40:05 +08:00
Beginner
eba03073ab
kernel: bump 6.6 to 6.6.59
2024-11-15 16:18:19 +08:00
coolsnowwolf
1063641e6e
branding: add LEDE branding
2024-11-14 13:14:47 +08:00
asushugo
dd5c39cbab
qualcommax: ipq60xx: add support for JDCloud RE-CS-07
2024-11-11 05:22:04 +00:00
coolsnowwolf
17cbfefbe1
qualcommax: ipq50xx: add support for GL.iNet GL-B3000
2024-11-10 23:25:26 +08:00
coolsnowwolf
2b10822e1b
kernel: qca-ssdk/qca-nss-dp: update to 12.5 for kernel 6.6 support
2024-11-09 23:01:43 +08:00
coolsnowwolf
f2e1532a7c
qualcommax: add support for JDCloud AX3000
2024-11-09 15:36:01 +08:00
coolsnowwolf
105f4fd96a
qualcommax: add ipq50xx target init support
2024-11-09 11:20:25 +08:00
aiamadeus
d83c55af85
rockchip: enable lcd/pwm-fan for srcm3588
2024-11-05 20:36:08 +08:00
aiamadeus
6cbe4f5135
ipq60xx: fixes usb3 power for jdc ax6600
...
Fixes : #12396
2024-11-05 20:30:10 +08:00
Daniel Golle
9630906317
mediatek: mt7988: fix peripheral SPI busses
...
The clocks for SPI busses were named wrongly which resulted in the
spi-mt65xx driver not requesting them. This has apparently been
worked around by marking the clocks required for SPI0 which is used
for SPI-NOR and SPI-NAND flash chips as critical.
Fix the device tree for all 3 generic SPI host controllers and no
longer mark clocks as critical.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-11-04 10:01:00 +08:00
