qualcommax: ipq60xx: add support for JDCloud RE-CS-07

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6010-re-cs-07.dts

@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq6018.dtsi"
+#include "ipq6018-ess.dtsi"
+#include "ipq6018-nss.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "JDCloud RE-CS-07";
+	compatible = "jdcloud,re-cs-07", "qcom,ipq6018";
+
+	aliases {
+		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart6;
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_red;
+		led-running = &led_status_blue;
+		led-upgrade = &led_status_red;
+
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+		ethernet2 = "/soc/dp3";
+		ethernet3 = "/soc/dp4";
+		ethernet4 = "/soc/dp5";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_red: red {
+			label = "red:status";
+			gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_blue: blue {
+			label = "blue:status";
+			gpios = <&tlmm 79 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_green: green {
+			label = "green:status";
+			gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <20 1>;
+
+	button_pins: button_pins {
+		mux {
+			pins = "gpio56";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	btuart_pins: btuart_pins {
+		mux {
+			pins = "gpio48", "gpio49";
+			function = "blsp5_uart";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	mdio_pins: mdio-pins {
+		mdc {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mdio {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	usb_pwr_pins: usb-pwr-pins {
+		mux {
+			pins = "gpio22";
+			function = "gpio";
+			bias-pull-down;
+			output-high;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&serial_3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_uart6 {
+	pinctrl-0 = <&btuart_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&qusb_phy_0 {
+	status = "okay";
+};
+
+&rpm {
+	status = "disabled";
+};
+
+&sdhc {
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&ssphy_0 {
+	status = "okay";
+};
+
+&usb3 {
+	pinctrl-0 = <&usb_pwr_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+	qca8075_0: ethernet-phy@24 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <24>;
+	};
+
+	qca8075_1: ethernet-phy@25 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <25>;
+	};
+
+	qca8075_2: ethernet-phy@26 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <26>;
+	};
+
+	qca8075_3: ethernet-phy@27 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <27>;
+	};
+};
+
+&switch {
+	status = "okay";
+
+	switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+	switch_lan_bmp = <0x1e>; /* lan port bitmap */
+	switch_wan_bmp = <0x20>; /* wan port bitmap */
+	switch_inner_bmp = <0xc0>; /*inner port bitmap*/
+	switch_mac_mode = <0x0>; /* mac mode for uniphy 0*/
+	switch_mac_mode1 = <0xf>; /* mac mode for uniphy 1*/
+	switch_mac_mode2 = <0xff>; /* mac mode for uniphy 2*/
+
+	qcom,port_phyinfo {
+		port@1 {
+			port_id = <1>;
+			phy_address = <24>;
+		};
+		port@2 {
+			port_id = <2>;
+			phy_address = <25>;
+		};
+		port@3 {
+			port_id = <3>;
+			phy_address = <26>;
+		};
+		port@4 {
+			port_id = <4>;
+			phy_address = <27>;
+		};
+	};
+};
+
+&edma {
+	status = "okay";
+};
+
+&dp1 {
+	status = "okay";
+	phy-handle = <&qca8075_0>;
+	label = "wan";
+};
+
+&dp2 {
+	status = "okay";
+	phy-handle = <&qca8075_1>;
+	label = "lan1";
+};
+
+&dp3 {
+	status = "okay";
+	phy-handle = <&qca8075_2>;
+	label = "lan2";
+};
+
+&dp4 {
+	status = "okay";
+	phy-handle = <&qca8075_3>;
+	label = "lan3";
+};

target/linux/qualcommax/image/ipq60xx.mk

@@ -75,6 +75,19 @@ define Device/jdcloud_re-cs-02
 endef
 TARGET_DEVICES += jdcloud_re-cs-02
 
+define Device/jdcloud_re-cs-07
+	$(call Device/FitImage)
+	$(call Device/EmmcImage)
+	DEVICE_VENDOR := JDCloud
+	DEVICE_MODEL := RE-CS-07
+	SOC := ipq6010
+	BLOCKSIZE := 64k
+	KERNEL_SIZE := 6144k
+	DEVICE_DTS_CONFIG := config@cp03-c4
+	DEVICE_PACKAGES := -kmod-ath11k-ahb -ath11k-firmware-ipq6018
+endef
+TARGET_DEVICES += jdcloud_re-cs-07
+
 define Device/jdcloud_re-ss-01
 	$(call Device/FitImage)
 	$(call Device/EmmcImage)

target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network

@@ -12,6 +12,7 @@ ipq60xx_setup_interfaces()
 
 	case "$board" in
 	cmiot,ax18|\
+	jdcloud,re-cs-07|\
 	jdcloud,re-ss-01|\
 	qihoo,360v6|\
 	redmi,ax5-*|\

target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh

@@ -18,6 +18,7 @@ platform_do_upgrade() {
 		nand_do_upgrade "$1"
 		;;
 	jdcloud,re-cs-02|\
+	jdcloud,re-cs-07|\
 	jdcloud,re-ss-01|\
 	redmi,ax5-jdcloud)
 		kernelname="0:HLOS"