This setting is more suitable for device running OpenWRT.
Most OpenWRT targets are already default to this configuration,
and it has shown better performance in VPN (wireguard).
Signed-off-by: Kien Truong <duckientruong@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
RK3528 is a cost down SoC with high CPU performance.
However, it has poor PCIe performance (same for RK3576).
Also CPU 0/1 can't get any rest due to rkbin limitation.
Some code references: https://github.com/warpme/minimyth2
This set the CONFIG_FRAME_WARN option depending on some target settings.
It will use the default from the upstream kernel and not the hard coded
value of 1024 now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Ensure the MAC address for all NanoPi R1 boards is assigned uniquely for
each board.
The vendor ships the device in two variants; one with and one without
eMMC; but both without static mac-addresses.
In order to assign both board types unique MAC addresses, fall back on
the same method used for the NanoPi R2S and R4S in case the EEPROM
chip is not present by generating the board MAC from the SD card CID.
[0] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R1#Hardware_Spec
Similar too and based on:
commit b5675f500daf ("rockchip: ensure NanoPi R4S has unique MAC address")
Co-authored-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip: add support for dilusense dlfr100
* rockchip: add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update rk3399-dlfr100.dts
* Add files via upload
