mirror of
https://github.com/coolsnowwolf/lede.git
synced 2025-04-16 04:13:31 +00:00
rockchip: add MangoPi M28C support
This commit is contained in:
aiamadeus
parent
171cb58c1d
commit
424c43cafd
@ -58,6 +58,10 @@ radxa,e20c)
|
||||
ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0"
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
|
||||
;;
|
||||
widora,mangopi-m28c)
|
||||
ucidef_set_led_netdev "modem" "MODEM" "blue:modem" "usb0"
|
||||
ucidef_set_led_netdev "wifi" "WIFI" "yellow:wifi" "wlan0"
|
||||
;;
|
||||
widora,mangopi-m28k|\
|
||||
widora,mangopi-m28k-pro)
|
||||
ucidef_set_led_netdev "lan" "LAN" "white:lan" "eth0"
|
||||
|
||||
@ -69,5 +69,9 @@ friendlyarm,nanopi-r6s)
|
||||
set_interface_core 4 "eth1"
|
||||
set_interface_core 8 "eth2"
|
||||
;;
|
||||
widora,mangopi-m28c)
|
||||
set_interface_core 4 "eth0"
|
||||
set_interface_core 8 "xhci-hcd:usb1"
|
||||
;;
|
||||
esac
|
||||
|
||||
|
||||
@ -0,0 +1,328 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
// Copyright (c) 2024 AY <amadeus@jmu.edu.cn>
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
|
||||
#include "rk3528.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
mmc2 = &sdio0;
|
||||
ethernet0 = &gmac1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:1500000n8";
|
||||
};
|
||||
|
||||
ir-receiver {
|
||||
compatible = "gpio-ir-receiver";
|
||||
gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir_int_pin>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_reg_on_h>;
|
||||
post-power-on-delay-ms = <100>;
|
||||
power-off-delay-us = <5000000>;
|
||||
reset-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc_1v8: vcc-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
vcc_3v3: vcc-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sd: vcc3v3-sd {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
vccio_sd: vccio-sd {
|
||||
compatible = "regulator-gpio";
|
||||
gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
states = <1800000 0x0>, <3300000 0x1>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc_ddr: vcc-ddr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vdd_0v9: vdd-0v9 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vdd_arm: vdd-arm {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm1 0 5000 1>;
|
||||
pwm-supply = <&vcc_sys>;
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <746000>;
|
||||
regulator-max-microvolt = <1201000>;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
};
|
||||
|
||||
vdd_logic: vdd-logic {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 5000 1>;
|
||||
pwm-supply = <&vcc_sys>;
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <705000>;
|
||||
regulator-max-microvolt = <1006000>;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
clock_in_out = "output";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_miim
|
||||
&rgmii_tx_bus2
|
||||
&rgmii_rx_bus2
|
||||
&rgmii_rgmii_clk
|
||||
&rgmii_rgmii_bus>;
|
||||
phy-handle = <&rgmii_phy>;
|
||||
phy-mode = "rgmii-id";
|
||||
phy-supply = <&vcc_3v3>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy: phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
realtek,led-data = <0x6d60>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
ir {
|
||||
ir_int_pin: ir-int-pin {
|
||||
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
lan_led_en: lan-led-en {
|
||||
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wan_led_en: wan-led-en {
|
||||
rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
work_led_en: work-led-en {
|
||||
rockchip,pins = <4 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_reg_on_h: wifi-reg-on-h {
|
||||
rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_wake_host_h: wifi-wake-host-h {
|
||||
rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
bluetooth {
|
||||
bt_reg_on_h: bt-reg-on-h {
|
||||
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_strb>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
max-frequency = <200000000>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
||||
non-removable;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
|
||||
wifi@1 {
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_wake_host_h>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2m1_xfer &uart2m1_ctsn>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc_sys>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc_sys>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
@ -0,0 +1,62 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
// Copyright (c) 2025 AY <amadeus@jmu.edu.cn>
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3528-mangopi-m28.dtsi"
|
||||
|
||||
/ {
|
||||
model = "MangoPi M28C";
|
||||
compatible = "widora,mangopi-m28c", "rockchip,rk3528";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_work;
|
||||
led-failsafe = &led_work;
|
||||
led-running = &led_work;
|
||||
led-upgrade = &led_work;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
rfkill {
|
||||
label = "rfkill";
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <100>;
|
||||
gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lan_led_en>, <&wan_led_en>, <&work_led_en>;
|
||||
|
||||
wifi {
|
||||
label = "yellow:wifi";
|
||||
gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_work: work {
|
||||
label = "red:work";
|
||||
gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
modem {
|
||||
label = "blue:modem";
|
||||
gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
rfkill-modem {
|
||||
compatible = "rfkill-gpio";
|
||||
label = "rfkill-modem";
|
||||
radio-type = "wwan";
|
||||
reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
|
||||
shutdown-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
status = "disabled";
|
||||
};
|
||||
@ -2,26 +2,52 @@
|
||||
// Copyright (c) 2024 AY <amadeus@jmu.edu.cn>
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3528-mangopi-m28k.dts"
|
||||
|
||||
#include "rk3528-mangopi-m28.dtsi"
|
||||
|
||||
/ {
|
||||
model = "MangoPi M28K Pro";
|
||||
compatible = "widora,mangopi-m28k-pro", "rockchip,rk3528";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_work;
|
||||
led-failsafe = &led_work;
|
||||
led-running = &led_work;
|
||||
led-upgrade = &led_work;
|
||||
};
|
||||
|
||||
i2c {
|
||||
compatible = "i2c-gpio";
|
||||
scl-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
sda-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "disabled";
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lan_led_en>, <&wan_led_en>, <&work_led_en>;
|
||||
|
||||
lan {
|
||||
label = "white:lan";
|
||||
gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "white:wan";
|
||||
gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_work: work {
|
||||
label = "green:work";
|
||||
gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
/delete-property/ pinctrl-0;
|
||||
/delete-property/ pinctrl-names;
|
||||
reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
@ -37,6 +63,8 @@
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
/delete-node/ rtl8111_isolate;
|
||||
&usb_host0_xhci {
|
||||
maximum-speed = "high-speed";
|
||||
phys = <&usb2phy0_otg>;
|
||||
phy-names = "usb2-phy";
|
||||
};
|
||||
|
||||
@ -2,38 +2,20 @@
|
||||
// Copyright (c) 2024 AY <amadeus@jmu.edu.cn>
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
|
||||
#include "rk3528.dtsi"
|
||||
#include "rk3528-mangopi-m28.dtsi"
|
||||
|
||||
/ {
|
||||
model = "MangoPi M28K";
|
||||
compatible = "widora,mangopi-m28k", "rockchip,rk3528";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
mmc2 = &sdio0;
|
||||
ethernet0 = &gmac1;
|
||||
|
||||
led-boot = &led_work;
|
||||
led-failsafe = &led_work;
|
||||
led-running = &led_work;
|
||||
led-upgrade = &led_work;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:1500000n8";
|
||||
};
|
||||
|
||||
ir-receiver {
|
||||
compatible = "gpio-ir-receiver";
|
||||
gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir_int_pin>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
@ -54,163 +36,12 @@
|
||||
gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
reset-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc_1v8: vcc-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
vcc_3v3: vcc-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sd: vcc3v3-sd {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
vccio_sd: vccio-sd {
|
||||
compatible = "regulator-gpio";
|
||||
gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
states = <1800000 0x0>, <3300000 0x1>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc_ddr: vcc-ddr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vdd_0v9: vdd-0v9 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vdd_arm: vdd-arm {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm1 0 5000 1>;
|
||||
pwm-supply = <&vcc_sys>;
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <746000>;
|
||||
regulator-max-microvolt = <1201000>;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
};
|
||||
|
||||
vdd_logic: vdd-logic {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 5000 1>;
|
||||
pwm-supply = <&vcc_sys>;
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <705000>;
|
||||
regulator-max-microvolt = <1006000>;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
clock_in_out = "output";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_miim
|
||||
&rgmii_tx_bus2
|
||||
&rgmii_rx_bus2
|
||||
&rgmii_rgmii_clk
|
||||
&rgmii_rgmii_bus>;
|
||||
phy-handle = <&rgmii_phy>;
|
||||
phy-mode = "rgmii-id";
|
||||
phy-supply = <&vcc_3v3>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy: phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
realtek,led-data = <0x6d60>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtl8111_isolate>;
|
||||
@ -233,130 +64,11 @@
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
ir {
|
||||
ir_int_pin: ir-int-pin {
|
||||
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
lan_led_en: lan-led-en {
|
||||
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wan_led_en: wan-led-en {
|
||||
rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
work_led_en: work-led-en {
|
||||
rockchip,pins = <4 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
rtl8111_isolate: rtl8111-isolate {
|
||||
rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_host_wake: wifi-host-wake {
|
||||
rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
bluetooth {
|
||||
bt_enable_h: bt-enable-h {
|
||||
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_strb>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
max-frequency = <200000000>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
||||
post-power-on-delay-ms = <50>;
|
||||
non-removable;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
|
||||
sdio_wifi@1 {
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2m1_xfer &uart2m1_ctsn>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
@ -365,32 +77,8 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb2phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc_sys>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc_sys>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
maximum-speed = "high-speed";
|
||||
phys = <&usb2phy0_otg>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -560,19 +560,31 @@ define Device/xunlong_orangepi-r1-plus-lts
|
||||
endef
|
||||
TARGET_DEVICES += xunlong_orangepi-r1-plus-lts
|
||||
|
||||
define Device/widora_mangopi-m28k
|
||||
define Device/widora_mangopi-m28
|
||||
DEVICE_VENDOR := Widora
|
||||
DEVICE_MODEL := MangoPi M28K
|
||||
SOC := rk3528
|
||||
UBOOT_DEVICE_NAME := evb-rk3528
|
||||
IMAGE/sysupgrade.img.gz := boot-common | boot-script rk3528 | pine64-img | gzip | append-metadata
|
||||
DEVICE_PACKAGES := kmod-aic8800 kmod-r8168 wpad-openssl -urngd
|
||||
endef
|
||||
|
||||
define Device/widora_mangopi-m28c
|
||||
$(call Device/widora_mangopi-m28)
|
||||
DEVICE_MODEL := MangoPi M28C
|
||||
DEVICE_PACKAGES += kmod-gpio-button-hotplug kmod-usb-serial-option
|
||||
endef
|
||||
TARGET_DEVICES += widora_mangopi-m28c
|
||||
|
||||
define Device/widora_mangopi-m28k
|
||||
$(call Device/widora_mangopi-m28)
|
||||
DEVICE_MODEL := MangoPi M28K
|
||||
DEVICE_PACKAGES += kmod-r8168
|
||||
endef
|
||||
TARGET_DEVICES += widora_mangopi-m28k
|
||||
|
||||
define Device/widora_mangopi-m28k-pro
|
||||
$(call Device/widora_mangopi-m28k)
|
||||
$(call Device/widora_mangopi-m28)
|
||||
DEVICE_MODEL := MangoPi M28K Pro
|
||||
DEVICE_PACKAGES := kmod-aic8800 kmod-i2c-gpio kmod-r8125 wpad-openssl -urngd
|
||||
DEVICE_PACKAGES += kmod-i2c-gpio kmod-r8125
|
||||
endef
|
||||
TARGET_DEVICES += widora_mangopi-m28k-pro
|
||||
|
||||
@ -1,10 +1,11 @@
|
||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||||
@@ -74,6 +74,13 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ro
|
||||
@@ -74,6 +74,14 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ro
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-armsom-sige1.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-mangopi-m28c.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-mangopi-m28k.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-mangopi-m28k-pro.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e20c.dtb
|
||||
|
||||
@ -1,10 +1,11 @@
|
||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||||
@@ -81,6 +81,13 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ro
|
||||
@@ -81,6 +81,14 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ro
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-armsom-sige1.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-mangopi-m28c.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-mangopi-m28k.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-mangopi-m28k-pro.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e20c.dtb
|
||||
|
||||
Loading…
Reference in New Issue
Block a user