This reverts commit 5be81314bb. Many users
reported that this commit broken their router. The mips platform does not
support changing the operating frequency of cpu while system is running.
Obviously it is more appropriate to use breed to overclock.
this patch improve cpu operating points to 896Mhz and match the clock-latency-ns values in the device tree for those found inside the OEM device tree and kernel source code
* mt7615: try wext and cfg80211
* iwinfo: support ra frequency offset
* iwinfo: ra support assolist, support AC bandwidth, read device id from mtd
* mt7615: clean code
* k2p: wireless interface should not add to bridge, wifi system will handle this
* mt7615: adapt for modern luci
* mt7615: fix Makefile, conflicts with luci-app-mtwifi
* mt_wifi: conflicts with mt7615d
* iwinfo: fix ra probe, scan list
* iwinfo: fix ra scan list
* mt7615: speed up wifi reload
* mt7615: fix bug
* mt7615: fix isolate
* mt7615: clean code
* mt7615: fix CE without cfg80211
* mt7615: split dbdc variant
* mt7615: revert config for non dbdc variant devices
* mt7615: move maccalc dependency to dbdc variant
* mt7615: append author info
* mt7615: move config generation to uci-defaults
[mac80211]
5b29614 mac80211: another fix for the sta connection monitor
1ed6eb1 mac80211: backport sched_set_fifo_low
cba4120 mac80211: add support for specifying a per-device scan list
e0d482f rt2x00: mt7620: differentiate based on SoC's CHIP_VER
[package]
amd64-microcode/intel-microcode/linux-firmware: update version
The original patch over rode the nf_conntrack_un/register_notifier API, which will
break other modules relying on the API. Reworked the notification APIs to play nice
with others. Also avoid to touch the code of fullcone nat.
Co-authored-by: quarkysg <hhtan72@yahoo.com>
The code is now much cleaner and works better than the old code.
Preparation for submitting it upstream (though with a different API)
Also add back MT7621 support and fix flow table coherence issues on
MT7622
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: Felix Fietkau <nbd@nbd.name>
This commit add support for the yyets_le router.
Hardware Highlights:
SoC: Qualcomm IPQ4019 717 MHz
RAM: 512M NT5CC256M16ER-EK
Flash: 32M SPI NOR MX25L25635F
WIFI1: 2.4 GHz 2T2R integrated
WIFI2: 5 GHz 2T2R integrated
Ethernet: Qualcomm QCA8075 (4x LAN, 1x WAN)
USB: 1x 3.0
LEDS: power, wlan2g, wlan5g, usb
Button: Reset
Installation:
Upload the firmware on the upgrade page of the stcok, and this will
take a few minutes.
This commit also supports the addition of a 128M nand flash version,
just use the P&W R619AC's OpBoot to overwrite the original uboot.
Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn>
* autocore: add cpu freq & temp display for some arm devices
Signed-off-by: CN_SZTL <cnsztl@project-openwrt.eu.org>
Co-authored-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
* Revert "show CPU Temperature for NanoPi R2S (#5612)"
This reverts commit 099439f051.
Co-authored-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
Seemingly unneeded based on new upstream code so manually deleted:
platform/820-usb-0007-usb-dwc3-gadget-increase-timeout-value-for-send-ep-c.patch
Manually merged:
generic-hack/251-sound_kconfig.patch
All other modifications made by update_kernel.sh
Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711
Run-tested: ipq806x/R7800
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
Co-authored-by: John Audia <graysky@archlinux.us>
* Revert "uboot-rockchip: update NanoPi R2S patches"
This reverts commit bda6f6572be630bcf9a1c8a429e40d8a53033af5.
This commit breaks the onboard ethernet on some units. Revert it for
now.
Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: enable Realtek PHY support
The NanoPi R2S features a Realtek Gigabit Ethernet PHY. Enable the
Realtek specific PHY driver to correctly configure internal delays.
Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-rockchip: fix nanopi-r2s failed to boot on some sd cards
Add regulator-boot-on parameters to vcc_sd.
Add startup-delay-us parameters to vcc_sdio.
This will improve the problem that in some SD cards are failing to boot up.
Signed-off-by: Yuan Tao <ty@wevs.org>
* rockchip: fix NanoPi R2S GMAC clock name
This commit fixes the name for the GMAC clock to gmac_clkin, as this is
the name of the clock provided by the rk3328-clk driver.
Without this commit, the GMAC will not work in TX direction.
Suggested-by: Tobias Waldvogel <tobias.waldvogel@gmail.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Co-authored-by: David Bauer <mail@david-bauer.net>
Co-authored-by: Yuan Tao <ty@wevs.org>
* treewide: remove support for 'DEVICE_COMPAT' variable
This commit removes support for the DEVICE_COMPAT variable due to it
requires relatively few changes.
* Revert "ramips: disable PORT 5 MAC RX/TX flow control by default"
The TX/RX flow control is not the cause of the TX timeouts issue
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* ramips: net/mediatek fix logical error
fe_empty_txd() should return `tx_ring_size - 1` on ring empty, and
return 0 on ring full.
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* ramips: net/mediatek disable eee
This disable eee for mt7530 ports, it causes the link down/up
issue, which happens when connecting to 100Mbit switch
Fixes: FS#1449
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* ramips: XiaoYu-C5: reuse ralink-eth driver
Co-authored-by: Chen Minqiang <ptpt52@gmail.com>
[mac80211]
ca5ee6e mac80211: Fix potential endless loop
2c14710 mac80211: add more AQL fixes/improvements
91fb3ce mac80211: remove an obsolete patch that is no longer doing anything useful
acf1733 mac80211: add preliminary support for enabling 802.11ax in config
d717343 mac80211: update encap offload patches to the latest version
673062f mac80211: allow bigger A-MSDU sizes in VHT, even if HT is limited
caf7277 mac80211: do not allow bigger VHT MPDUs than the hardware supports
cd36c0d mac80211: select the first available channel for 5GHz interfaces
1c6d456 mac80211: fix regression in station connection monitor optimization
4bd7689 mac80211: update sta connection monitor regression fix
[target]
Sync: at91, ath25, ath79, lantiq, mediatek, mvebu.
* rockchip: refresh NanoPi R2S patches
Update the patches for the NanoPi R2S to the v3 sent (and accepted)
upstream.
Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: rk3328: add compatible to NanoPi R2S ethernet PHY
This adds the compatible property to the NanoPi R2S ethernet PHY node.
Otherwise, the PHY might not be probed, as the PHY ID reads all 0xff
when it is still in reset.
Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-rockchip: update NanoPi R2S patches
Update the patches required for the NanoPi R2S to match the DTS accepted
for upstream Linux. The U-Boot patch meanwhile is still pending
upstream.
Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: refresh target patches
Signed-off-by: CN_SZTL <cnsztl@project-openwrt.eu.org>
Co-authored-by: CN_SZTL <cnsztl@project-openwrt.eu.org>
Co-authored-by: wevsty <ty@wevs.org>
* rockchip: fix NanoPi R2S PHY ID
Fix the PHY ID for the NanoPi R2S PHY compatible to match the used PHY.
The ID was wrong as I've accidentally picked the wrong upstream patch.
Signed-off-by: David Bauer <mail@david-bauer.net>
Co-authored-by: David Bauer <mail@david-bauer.net>
Co-authored-by: wevsty <ty@wevs.org>
