add glinet-mt1300 support (#6142)

* 添加glinet-mt1300支持

* 优化更新mt1300支持

target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts

@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "glinet,gl-mt1300", "mediatek,mt7621-soc";
+	model = "GL.iNet GL-MT1300";
+
+	aliases {
+		led-boot = &led_run;
+		led-failsafe = &led_run;
+		led-running = &led_run;
+		led-upgrade = &led_run;
+		label-mac-device = &wan;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		switch {
+			label = "switch";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_run: run {
+			label = "blue:run";
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		system {
+			label = "white:system";
+			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c {
+	status = "okay";
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "mx25l25635f", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x1fb0000>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0>;
+	};
+};
+
+&gmac0 {
+	mtd-mac-address = <&factory 0x4000>;
+	mtd-mac-address-increment = <1>;
+};
+
+&switch0 {
+	ports {
+		port@2 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port@3 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		wan: port@4 {
+			status = "okay";
+			label = "wan";
+			mtd-mac-address = <&factory 0x4000>;
+		};
+	};
+};
+
+&uartlite3 {
+	status = "okay";
+};
+
+&state_default {
+	gpio {
+		group = "wdt", "jtag";
+		function = "gpio";
+	};
+};

target/linux/ramips/image/mt7621.mk

@@ -356,6 +356,14 @@ define Device/firefly_firewrt
 endef
 TARGET_DEVICES += firefly_firewrt
 
+define Device/glinet_gl-mt1300
+  IMAGE_SIZE := 32448k
+  DEVICE_VENDOR := GL.iNet
+  DEVICE_MODEL := GL-MT1300
+  DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3
+endef
+TARGET_DEVICES += glinet_gl-mt1300
+
 define Device/gehua_ghl-r-001
   IMAGE_SIZE := 32448k
   DEVICE_VENDOR := GeHua

target/linux/ramips/mt7621/base-files/etc/board.d/02_network

@@ -13,6 +13,7 @@ ramips_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "lan" "wan"
 		;;
 	asiarf,ap7621-nv1|\
+	glinet,gl-mt1300|\
 	lenovo,newifi-d1|\
 	mikrotik,routerboard-m33g|\
 	xiaomi,mir3g-v2)

target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

@@ -10,6 +10,10 @@ PHYNBR=${DEVPATH##*/phy}
 board=$(board_name)
 
 case "$board" in
+	glinet,gl-mt1300)
+		[ "$PHYNBR" = "1" ] && \
+			macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress
+		;;
 	linksys,ea7500-v2)
 		hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 		[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress