* mpc85xx: add support for cpu type 8548
8540 cpu type corresponds to e500v1 core while
8548 cpu type corresponds to e500v2 core
See https://www.nxp.com/products/processors-and-microcontrollers/legacy-mpu-mcus/powerquicc-processors:POWERQUICC_HOME#powerquicc-iii-mpc85xx
and https://www.nxp.com/docs/en/application-note/AN2807.pdf .
Co-authored-by: Josef Schlehofer <josef.schlehofer@nic.cz>
Co-authored-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
* tree-wide: Do not use package librt and libpthread
The libraries libpthread, libdl, libutil, libanl have been integrated
into the libc library in version 2.34. it is not needed to explicitly
link them any more.
Most of the functions have been moved from the librt.so into libc.so
some time ago already.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/binutils: backport stable patches
Add the patches with real changes from the binutils 2.39 stable branch.
I am not aware that we ran into any of these problems, but I think it is
better to take the existing stable patches.
They were exported like this:
git format-patch binutils-2_39...origin/binutils-2_39-branch
I removed the patches changing the version numbers only.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/binutils: switch to version 2.39 by default
This was build tested with all core packages on all targets
successfully.
This was run tested on the following systems:
* lantiq/xrx200 musl
* sunxi/cortex53 musl
* x86/64 musl
* x86/64 glibc
Some trusted firmware arm builds needed some fixes to build with
binutils 2.39, this was merged before.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools: Improve diffability/maintainability
There's no purpose to squish multiple tools into a single line (and
spread those out over multiple lines). It might look 'nice' in certain
conditions, but it's annoying to maintain.
For example, but not limited to:
* adding/removing tools, causes hard to read diffs
* Duplicates are harder to spot
* Sorting can not be (easily?) automated
With this proposed change, the above annoyances go away. Inserting a new
tool can be done with a single line-change-diff, sorting can be done by
any editor (in vi, select, :sort for example) and dupes are much easier
to spot.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* rules: drop -Wno-error additional flags from default TARGET_CFLAGS
We currently enable -Wno-error=unused-but-set-variable and
-Wno-error=unused-result by default on every compile package.
While this is (relatively) unharmful, we should follow other project
direction and starts enforcing good code quality. For example the linux
kernel recently started to enforce Wall by default and clean code is
mandatory for inclusion.
Drop for good these flags and and make it mandatory to correctly handle
return values at least with a warning log if they are not strictly error
condition.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* bridger: update to the latest version
def7755c459d add missing copyright headers
f68307fd96d7 add hairpin mode support
9ee8f433ba4e nl: do not pass NDA_VLAN with vid=0
978c1f9eed07 add support for the bridge port isolated flag
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: Šimon Bořek <simon.borek@nic.cz>
Co-authored-by: Josef Schlehofer <josef.schlehofer@nic.cz>
Co-authored-by: Pali Rohár <pali@kernel.org>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Co-authored-by: Olliver Schinagl <oliver@schinagl.nl>
Co-authored-by: Christian Marangi <ansuelsmth@gmail.com>
Co-authored-by: Felix Fietkau <nbd@nbd.name>
Package hostapd-common is a dependency of every other package defined in
hostpad Makefile. It is currently built next to the bottom of that
Makefile's package list.
If you run make back to back, then check-compile will compare the
hostapd-common timestamp to the variant being compiled, to decide if the
varint needs to be rebuilt or not. Since the hostapd-conf package is
built towards the end of the list, it will be newer than most of the
variants, causing unnecessary package rebuilds.
Move it to the top, so that its timestamp will be older than dependent
packages, avoiding unnecessary rebuild of every selected variant.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Co-authored-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
This is a follow up of 1a9b896d ("treewide: nuke DRIVER_11W_SUPPORT").
LuCI commit ab010406 ("luci-mod-network: skip check for 802.11w feature")
skips check of the 11w feature [1]. Now advertising it in hostapd is
superfluous so stop doing it.
[1]: https://github.com/openwrt/luci/pull/4689
Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
[remove outdated PKG_RELEASE bump and update to SPDX]
Signed-off-by: Paul Spooren <mail@aparcar.org>
[mac80211]
ca5ee6e mac80211: Fix potential endless loop
2c14710 mac80211: add more AQL fixes/improvements
91fb3ce mac80211: remove an obsolete patch that is no longer doing anything useful
acf1733 mac80211: add preliminary support for enabling 802.11ax in config
d717343 mac80211: update encap offload patches to the latest version
673062f mac80211: allow bigger A-MSDU sizes in VHT, even if HT is limited
caf7277 mac80211: do not allow bigger VHT MPDUs than the hardware supports
cd36c0d mac80211: select the first available channel for 5GHz interfaces
1c6d456 mac80211: fix regression in station connection monitor optimization
4bd7689 mac80211: update sta connection monitor regression fix
[target]
Sync: at91, ath25, ath79, lantiq, mediatek, mvebu.
* mac80211: bump to 5.8-rc2
changelog:
dfe0bc8 mac80211: allow ACS restriction with fixed channel
727685c mac80211: rt2x00: define RF5592 in init_eeprom routine
cfd2f3b mac80211: create channel list for fixed channel operation
d1100c7 mac80211: Update to version 5.7.5-1
ed2015c mac80211: Update to version 5.8-rc2-1
a956c14 mac80211: util: don't warn on missing sband iftype data
8b3e170 hostapd: fix incorrect service name
68bf5a9 mac80211: don't kill wireless daemon on teardown
25e0ae6 mac80211: make cfg80211 testmode support optional (and disabled by default)
b7727a8 mac80211: fix AQL issues
3d731fc mac80211: merge performance improvement patches
* mt76: update to 2020-07-22
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: allow VHT on 2.4GHz
Allow VHT rate on 2.4GHz in order to use 256-QAM
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ath10k: allow VHT on 2.4GHz
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* hostapd: add vendor_vht option
hostapd has vendor_vht option to enable VHT (256-QAM) on 2.4GHz
Add this option to hostapd.sh so users can enable it via uci
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ipq807x: Refresh kernel configuration
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq807x: Add WCSS bus
This is needed to build ath11k.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Add ath11k
This adds the Qualcomm 802.11ax wireless chipset support.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Co-authored-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
