298977887/lede
1
0
Fork 0
mirror of https://github.com/coolsnowwolf/lede.git synced 2025-04-15 18:03:30 +00:00
Code Issues Packages Projects Releases Wiki Activity
849ae160a5
lede/package/network/services/hostapd/Makefile
lovehackintosh 849ae160a5
treewide: sync with upstream (#10720) 
* mpc85xx: add support for cpu type 8548

8540 cpu type corresponds to e500v1 core while
8548 cpu type corresponds to e500v2 core

See https://www.nxp.com/products/processors-and-microcontrollers/legacy-mpu-mcus/powerquicc-processors:POWERQUICC_HOME#powerquicc-iii-mpc85xx
and https://www.nxp.com/docs/en/application-note/AN2807.pdf .

Co-authored-by: Josef Schlehofer <josef.schlehofer@nic.cz>
Co-authored-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Šimon Bořek <simon.borek@nic.cz>

* tree-wide: Do not use package librt and libpthread

The libraries libpthread, libdl, libutil, libanl have been integrated
into the libc library in version 2.34. it is not needed to explicitly
link them any more.

Most of the functions have been moved from the librt.so into libc.so
some time ago already.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

* toolchain/binutils: backport stable patches

Add the patches with real changes from the binutils 2.39 stable branch.
I am not aware that we ran into any of these problems, but I think it is
better to take the existing stable patches.

They were exported like this:
git format-patch binutils-2_39...origin/binutils-2_39-branch
I removed the patches changing the version numbers only.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

* toolchain/binutils: switch to version 2.39 by default

This was build tested with all core packages on all targets
successfully.

This was run tested on the following systems:
* lantiq/xrx200 musl
* sunxi/cortex53 musl
* x86/64 musl
* x86/64 glibc

Some trusted firmware arm builds needed some fixes to build with
binutils 2.39, this was merged before.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

* tools: Improve diffability/maintainability

There's no purpose to squish multiple tools into a single line (and
spread those out over multiple lines). It might look 'nice' in certain
conditions, but it's annoying to maintain.

For example, but not limited to:
* adding/removing tools, causes hard to read diffs
* Duplicates are harder to spot
* Sorting can not be (easily?) automated

With this proposed change, the above annoyances go away. Inserting a new
tool can be done with a single line-change-diff, sorting can be done by
any editor (in vi, select, :sort for example) and dupes are much easier
to spot.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

* rules: drop -Wno-error additional flags from default TARGET_CFLAGS

We currently enable -Wno-error=unused-but-set-variable and
-Wno-error=unused-result by default on every compile package.

While this is (relatively) unharmful, we should follow other project
direction and starts enforcing good code quality. For example the linux
kernel recently started to enforce Wall by default and clean code is
mandatory for inclusion.

Drop for good these flags and and make it mandatory to correctly handle
return values at least with a warning log if they are not strictly error
condition.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

* bridger: update to the latest version

def7755c459d add missing copyright headers
f68307fd96d7 add hairpin mode support
9ee8f433ba4e nl: do not pass NDA_VLAN with vid=0
978c1f9eed07 add support for the bridge port isolated flag

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: Šimon Bořek <simon.borek@nic.cz>
Co-authored-by: Josef Schlehofer <josef.schlehofer@nic.cz>
Co-authored-by: Pali Rohár <pali@kernel.org>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Co-authored-by: Olliver Schinagl <oliver@schinagl.nl>
Co-authored-by: Christian Marangi <ansuelsmth@gmail.com>
Co-authored-by: Felix Fietkau <nbd@nbd.name>
2023-01-04 15:41:15 +08:00

713 lines
20 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2006-2021 OpenWrt.org
include $(TOPDIR)/rules.mk
PKG_NAME:=hostapd
PKG_RELEASE:=$(AUTORELEASE)
PKG_SOURCE_URL:=http://w1.fi/hostap.git
PKG_SOURCE_PROTO:=git
PKG_SOURCE_DATE:=2022-01-16
PKG_SOURCE_VERSION:=cff80b4f7d3c0a47c052e8187d671710f48939e4
PKG_MIRROR_HASH:=712965bfa11a2e601d3e1c9a51a2cf3cffc6db89abafb3df3eb0cfd83c64705b
PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
PKG_LICENSE:=BSD-3-Clause
PKG_CPE_ID:=cpe:/a:w1.fi:hostapd
PKG_BUILD_PARALLEL:=1
PKG_ASLR_PIE_REGULAR:=1
PKG_CONFIG_DEPENDS:= \
CONFIG_PACKAGE_kmod-ath9k \
CONFIG_PACKAGE_kmod-cfg80211 \
CONFIG_PACKAGE_hostapd \
CONFIG_PACKAGE_hostapd-basic \
CONFIG_PACKAGE_hostapd-mini \
CONFIG_WPA_RFKILL_SUPPORT \
CONFIG_DRIVER_WEXT_SUPPORT \
CONFIG_DRIVER_11N_SUPPORT \
CONFIG_DRIVER_11AC_SUPPORT \
CONFIG_DRIVER_11AX_SUPPORT \
CONFIG_WPA_ENABLE_WEP
EAPOL_TEST_PROVIDERS:=eapol-test eapol-test-openssl eapol-test-wolfssl
SUPPLICANT_PROVIDERS:=
HOSTAPD_PROVIDERS:=
LOCAL_TYPE=$(strip \
$(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \
$(if $(findstring supplicant,$(BUILD_VARIANT)),supplicant, \
hostapd \
)))
LOCAL_AND_LIB_VARIANT=$(patsubst hostapd-%,%,\
$(patsubst wpad-%,%,\
$(patsubst supplicant-%,%,\
$(BUILD_VARIANT)\
)))
LOCAL_VARIANT=$(patsubst %-internal,%,\
$(patsubst %-openssl,%,\
$(patsubst %-wolfssl,%,\
$(LOCAL_AND_LIB_VARIANT)\
)))
SSL_VARIANT=$(strip \
$(if $(findstring openssl,$(LOCAL_AND_LIB_VARIANT)),openssl,\
$(if $(findstring wolfssl,$(LOCAL_AND_LIB_VARIANT)),wolfssl,\
internal\
)))
CONFIG_VARIANT:=$(LOCAL_VARIANT)
ifeq ($(LOCAL_VARIANT),mesh)
CONFIG_VARIANT:=full
endif
include $(INCLUDE_DIR)/package.mk
STAMP_CONFIGURED:=$(STAMP_CONFIGURED)_$(CONFIG_WPA_MSG_MIN_PRIORITY)
ifneq ($(CONFIG_DRIVER_11N_SUPPORT),)
HOSTAPD_IEEE80211N:=y
endif
ifneq ($(CONFIG_DRIVER_11AC_SUPPORT),)
HOSTAPD_IEEE80211AC:=y
endif
ifneq ($(CONFIG_DRIVER_11AX_SUPPORT),)
HOSTAPD_IEEE80211AX:=y
endif
DRIVER_MAKEOPTS= \
CONFIG_ACS=$(CONFIG_PACKAGE_kmod-cfg80211) \
CONFIG_DRIVER_NL80211=$(CONFIG_PACKAGE_kmod-cfg80211) \
CONFIG_IEEE80211N=$(HOSTAPD_IEEE80211N) \
CONFIG_IEEE80211AC=$(HOSTAPD_IEEE80211AC) \
CONFIG_IEEE80211AX=$(HOSTAPD_IEEE80211AX) \
CONFIG_DRIVER_WEXT=$(CONFIG_DRIVER_WEXT_SUPPORT) \
ifeq ($(SSL_VARIANT),openssl)
DRIVER_MAKEOPTS += CONFIG_TLS=openssl CONFIG_SAE=y
TARGET_LDFLAGS += -lcrypto -lssl
ifeq ($(LOCAL_VARIANT),basic)
DRIVER_MAKEOPTS += CONFIG_OWE=y
endif
ifeq ($(LOCAL_VARIANT),mesh)
DRIVER_MAKEOPTS += CONFIG_AP=y CONFIG_MESH=y
endif
ifeq ($(LOCAL_VARIANT),full)
DRIVER_MAKEOPTS += CONFIG_OWE=y CONFIG_SUITEB192=y CONFIG_AP=y CONFIG_MESH=y
endif
endif
ifeq ($(SSL_VARIANT),wolfssl)
DRIVER_MAKEOPTS += CONFIG_TLS=wolfssl CONFIG_SAE=y
TARGET_LDFLAGS += -lwolfssl
ifeq ($(LOCAL_VARIANT),basic)
DRIVER_MAKEOPTS += CONFIG_OWE=y
endif
ifeq ($(LOCAL_VARIANT),mesh)
DRIVER_MAKEOPTS += CONFIG_AP=y CONFIG_MESH=y CONFIG_WPS_NFC=1
endif
ifeq ($(LOCAL_VARIANT),full)
DRIVER_MAKEOPTS += CONFIG_OWE=y CONFIG_SUITEB192=y CONFIG_AP=y CONFIG_MESH=y CONFIG_WPS_NFC=1
endif
endif
ifneq ($(LOCAL_TYPE),hostapd)
ifdef CONFIG_WPA_RFKILL_SUPPORT
DRIVER_MAKEOPTS += NEED_RFKILL=y
endif
endif
DRV_DEPENDS:=+PACKAGE_kmod-cfg80211:libnl-tiny
define Package/hostapd/Default
SECTION:=net
CATEGORY:=Network
SUBMENU:=WirelessAPD
TITLE:=IEEE 802.1x Authenticator
URL:=http://hostap.epitest.fi/
DEPENDS:=$(DRV_DEPENDS) +hostapd-common +libubus
EXTRA_DEPENDS:=hostapd-common (=$(PKG_VERSION)-$(PKG_RELEASE))
USERID:=network=101:network=101
PROVIDES:=hostapd
CONFLICTS:=$(HOSTAPD_PROVIDERS)
HOSTAPD_PROVIDERS+=$(1)
endef
define Package/hostapd
$(call Package/hostapd/Default,$(1))
TITLE+= (built-in full)
VARIANT:=full-internal
endef
define Package/hostapd/description
This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
Authenticator.
endef
define Package/hostapd-openssl
$(call Package/hostapd/Default,$(1))
TITLE+= (OpenSSL full)
VARIANT:=full-openssl
DEPENDS+=+libopenssl
endef
Package/hostapd-openssl/description = $(Package/hostapd/description)
define Package/hostapd-wolfssl
$(call Package/hostapd/Default,$(1))
TITLE+= (wolfSSL full)
VARIANT:=full-wolfssl
DEPENDS+=+libwolfssl
endef
Package/hostapd-wolfssl/description = $(Package/hostapd/description)
define Package/hostapd-basic
$(call Package/hostapd/Default,$(1))
TITLE+= (WPA-PSK, 11r, 11w)
VARIANT:=basic
endef
define Package/hostapd-basic/description
This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
endef
define Package/hostapd-basic-openssl
$(call Package/hostapd/Default,$(1))
TITLE+= (WPA-PSK, 11r and 11w)
VARIANT:=basic-openssl
DEPENDS+=+libopenssl
endef
define Package/hostapd-basic-openssl/description
This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
endef
define Package/hostapd-basic-wolfssl
$(call Package/hostapd/Default,$(1))
TITLE+= (WPA-PSK, 11r and 11w)
VARIANT:=basic-wolfssl
DEPENDS+=+libwolfssl
endef
define Package/hostapd-basic-wolfssl/description
This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
endef
define Package/hostapd-mini
$(call Package/hostapd/Default,$(1))
TITLE+= (WPA-PSK only)
VARIANT:=mini
endef
define Package/hostapd-mini/description
This package contains a minimal IEEE 802.1x/WPA Authenticator (WPA-PSK only).
endef
define Package/wpad/Default
SECTION:=net
CATEGORY:=Network
SUBMENU:=WirelessAPD
TITLE:=IEEE 802.1x Auth/Supplicant
DEPENDS:=$(DRV_DEPENDS) +hostapd-common +libubus
EXTRA_DEPENDS:=hostapd-common (=$(PKG_VERSION)-$(PKG_RELEASE))
USERID:=network=101:network=101
URL:=http://hostap.epitest.fi/
PROVIDES:=hostapd wpa-supplicant
CONFLICTS:=$(HOSTAPD_PROVIDERS) $(SUPPLICANT_PROVIDERS)
HOSTAPD_PROVIDERS+=$(1)
SUPPLICANT_PROVIDERS+=$(1)
endef
define Package/wpad
$(call Package/wpad/Default,$(1))
TITLE+= (built-in full)
VARIANT:=wpad-full-internal
endef
define Package/wpad/description
This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
Authenticator and Supplicant
endef
define Package/wpad-openssl
$(call Package/wpad/Default,$(1))
TITLE+= (OpenSSL full)
VARIANT:=wpad-full-openssl
DEPENDS+=+libopenssl
endef
Package/wpad-openssl/description = $(Package/wpad/description)
define Package/wpad-wolfssl
$(call Package/wpad/Default,$(1))
TITLE+= (wolfSSL full)
VARIANT:=wpad-full-wolfssl
DEPENDS+=+libwolfssl
endef
Package/wpad-wolfssl/description = $(Package/wpad/description)
define Package/wpad-basic
$(call Package/wpad/Default,$(1))
TITLE+= (WPA-PSK, 11r, 11w)
VARIANT:=wpad-basic
endef
define Package/wpad-basic/description
This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, 802.11r and 802.11w support.
endef
define Package/wpad-basic-openssl
$(call Package/wpad/Default,$(1))
TITLE+= (OpenSSL, 11r, 11w)
VARIANT:=wpad-basic-openssl
DEPENDS+=+libopenssl
endef
define Package/wpad-basic-openssl/description
This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, SAE (WPA3-Personal), 802.11r and 802.11w support.
endef
define Package/wpad-basic-wolfssl
$(call Package/wpad/Default,$(1))
TITLE+= (wolfSSL, 11r, 11w)
VARIANT:=wpad-basic-wolfssl
DEPENDS+=+libwolfssl
endef
define Package/wpad-basic-wolfssl/description
This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, SAE (WPA3-Personal), 802.11r and 802.11w support.
endef
define Package/wpad-mini
$(call Package/wpad/Default,$(1))
TITLE+= (WPA-PSK only)
VARIANT:=wpad-mini
endef
define Package/wpad-mini/description
This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only).
endef
define Package/wpad-mesh
$(call Package/wpad/Default,$(1))
DEPENDS+=@PACKAGE_kmod-cfg80211 @(!TARGET_uml||BROKEN)
PROVIDES+=wpa-supplicant-mesh wpad-mesh
endef
define Package/wpad-mesh/description
This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (with 802.11s mesh and SAE support).
endef
define Package/wpad-mesh-openssl
$(call Package/wpad-mesh,$(1))
TITLE+= (OpenSSL, 11s, SAE)
DEPENDS+=+libopenssl
VARIANT:=wpad-mesh-openssl
endef
Package/wpad-mesh-openssl/description = $(Package/wpad-mesh/description)
define Package/wpad-mesh-wolfssl
$(call Package/wpad-mesh,$(1))
TITLE+= (wolfSSL, 11s, SAE)
DEPENDS+=+libwolfssl
VARIANT:=wpad-mesh-wolfssl
endef
Package/wpad-mesh-wolfssl/description = $(Package/wpad-mesh/description)
define Package/wpa-supplicant/Default
SECTION:=net
CATEGORY:=Network
SUBMENU:=WirelessAPD
TITLE:=WPA Supplicant
URL:=http://hostap.epitest.fi/wpa_supplicant/
DEPENDS:=$(DRV_DEPENDS) +hostapd-common +libubus
EXTRA_DEPENDS:=hostapd-common (=$(PKG_VERSION)-$(PKG_RELEASE))
USERID:=network=101:network=101
PROVIDES:=wpa-supplicant
CONFLICTS:=$(SUPPLICANT_PROVIDERS)
SUPPLICANT_PROVIDERS+=$(1)
endef
define Package/wpa-supplicant
$(call Package/wpa-supplicant/Default,$(1))
TITLE+= (built-in full)
VARIANT:=supplicant-full-internal
endef
define Package/wpa-supplicant-openssl
$(call Package/wpa-supplicant/Default,$(1))
TITLE+= (OpenSSL full)
VARIANT:=supplicant-full-openssl
DEPENDS+=+libopenssl
endef
define Package/wpa-supplicant-wolfssl
$(call Package/wpa-supplicant/Default,$(1))
TITLE+= (wolfSSL full)
VARIANT:=supplicant-full-wolfssl
DEPENDS+=+libwolfssl
endef
define Package/wpa-supplicant/config
source "$(SOURCE)/Config.in"
endef
define Package/wpa-supplicant-p2p
$(call Package/wpa-supplicant/Default,$(1))
TITLE+= (Wi-Fi P2P support)
DEPENDS+=@PACKAGE_kmod-cfg80211
VARIANT:=supplicant-p2p-internal
endef
define Package/wpa-supplicant-mesh/Default
$(call Package/wpa-supplicant/Default,$(1))
DEPENDS+=@PACKAGE_kmod-cfg80211 @(!TARGET_uml||BROKEN)
PROVIDES+=wpa-supplicant-mesh
endef
define Package/wpa-supplicant-mesh-openssl
$(call Package/wpa-supplicant-mesh/Default,$(1))
TITLE+= (OpenSSL, 11s, SAE)
VARIANT:=supplicant-mesh-openssl
DEPENDS+=+libopenssl
endef
define Package/wpa-supplicant-mesh-wolfssl
$(call Package/wpa-supplicant-mesh/Default,$(1))
TITLE+= (wolfSSL, 11s, SAE)
VARIANT:=supplicant-mesh-wolfssl
DEPENDS+=+libwolfssl
endef
define Package/wpa-supplicant-basic
$(call Package/wpa-supplicant/Default,$(1))
TITLE+= (11r, 11w)
VARIANT:=supplicant-basic
endef
define Package/wpa-supplicant-mini
$(call Package/wpa-supplicant/Default,$(1))
TITLE+= (minimal)
VARIANT:=supplicant-mini
endef
define Package/hostapd-common
TITLE:=hostapd/wpa_supplicant common support files
SECTION:=net
CATEGORY:=Network
SUBMENU:=WirelessAPD
endef
define Package/hostapd-utils
SECTION:=net
CATEGORY:=Network
SUBMENU:=WirelessAPD
TITLE:=IEEE 802.1x Authenticator (utils)
URL:=http://hostap.epitest.fi/
DEPENDS:=@$(subst $(space),||,$(foreach pkg,$(HOSTAPD_PROVIDERS),PACKAGE_$(pkg)))
VARIANT:=*
endef
define Package/hostapd-utils/description
This package contains a command line utility to control the
IEEE 802.1x/WPA/EAP/RADIUS Authenticator.
endef
define Package/wpa-cli
SECTION:=net
CATEGORY:=Network
SUBMENU:=WirelessAPD
DEPENDS:=@$(subst $(space),||,$(foreach pkg,$(SUPPLICANT_PROVIDERS),PACKAGE_$(pkg)))
TITLE:=WPA Supplicant command line control utility
VARIANT:=*
endef
define Package/eapol-test/Default
TITLE:=802.1x auth test utility
SECTION:=net
SUBMENU:=WirelessAPD
CATEGORY:=Network
DEPENDS:=$(DRV_DEPENDS) +libubus
endef
define Package/eapol-test
$(call Package/eapol-test/Default,$(1))
TITLE+= (built-in full)
VARIANT:=supplicant-full-internal
endef
define Package/eapol-test-openssl
$(call Package/eapol-test/Default,$(1))
TITLE+= (OpenSSL full)
VARIANT:=supplicant-full-openssl
CONFLICTS:=$(filter-out eapol-test-openssl ,$(EAPOL_TEST_PROVIDERS))
DEPENDS+=+libopenssl
PROVIDES:=eapol-test
endef
define Package/eapol-test-wolfssl
$(call Package/eapol-test/Default,$(1))
TITLE+= (wolfSSL full)
VARIANT:=supplicant-full-wolfssl
CONFLICTS:=$(filter-out eapol-test-openssl ,$(filter-out eapol-test-wolfssl ,$(EAPOL_TEST_PROVIDERS)))
DEPENDS+=+libwolfssl
PROVIDES:=eapol-test
endef
ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED)))
define Build/Configure/rebuild
$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.a | $(XARGS) rm -f
rm -f $(PKG_BUILD_DIR)/hostapd/hostapd
rm -f $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant
rm -f $(PKG_BUILD_DIR)/.config_*
touch $(subst .configured_,.config_,$(STAMP_CONFIGURED))
endef
endif
define Build/Configure
$(Build/Configure/rebuild)
$(if $(wildcard ./files/hostapd-$(CONFIG_VARIANT).config), \
$(CP) ./files/hostapd-$(CONFIG_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config \
)
$(if $(wildcard ./files/wpa_supplicant-$(CONFIG_VARIANT).config), \
$(CP) ./files/wpa_supplicant-$(CONFIG_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config
)
endef
TARGET_CPPFLAGS := \
-I$(STAGING_DIR)/usr/include/libnl-tiny \
-I$(PKG_BUILD_DIR)/src/crypto \
$(TARGET_CPPFLAGS) \
-DCONFIG_LIBNL20 \
-D_GNU_SOURCE \
$(if $(CONFIG_WPA_MSG_MIN_PRIORITY),-DCONFIG_MSG_MIN_PRIORITY=$(CONFIG_WPA_MSG_MIN_PRIORITY))
TARGET_CFLAGS += -ffunction-sections -fdata-sections -flto
TARGET_LDFLAGS += -Wl,--gc-sections -flto=jobserver -fuse-linker-plugin -lubox -lubus
ifdef CONFIG_PACKAGE_kmod-cfg80211
TARGET_LDFLAGS += -lm -lnl-tiny
endif
ifdef CONFIG_WPA_ENABLE_WEP
DRIVER_MAKEOPTS += CONFIG_WEP=y
endif
define Build/RunMake
CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \
$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR)/$(1) \
$(TARGET_CONFIGURE_OPTS) \
$(DRIVER_MAKEOPTS) \
LIBS="$(TARGET_LDFLAGS)" \
LIBS_c="$(TARGET_LDFLAGS_C)" \
AR="$(TARGET_CROSS)gcc-ar" \
BCHECK= \
$(if $(findstring s,$(OPENWRT_VERBOSE)),V=1) \
$(2)
endef
define Build/Compile/wpad
echo ` \
$(call Build/RunMake,hostapd,-s MULTICALL=1 dump_cflags); \
$(call Build/RunMake,wpa_supplicant,-s MULTICALL=1 dump_cflags) | \
sed -e 's,-n ,,g' -e 's^$(TARGET_CFLAGS)^^' \
` > $(PKG_BUILD_DIR)/.cflags
sed -i 's/"/\\"/g' $(PKG_BUILD_DIR)/.cflags
+$(call Build/RunMake,hostapd, \
CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
MULTICALL=1 \
hostapd_cli hostapd_multi.a \
)
+$(call Build/RunMake,wpa_supplicant, \
CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
MULTICALL=1 \
wpa_cli wpa_supplicant_multi.a \
)
+export MAKEFLAGS="$(MAKE_JOBSERVER)"; $(TARGET_CC) -o $(PKG_BUILD_DIR)/wpad \
$(TARGET_CFLAGS) \
./files/multicall.c \
$(PKG_BUILD_DIR)/hostapd/hostapd_multi.a \
$(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant_multi.a \
$(TARGET_LDFLAGS)
endef
define Build/Compile/hostapd
+$(call Build/RunMake,hostapd, \
hostapd hostapd_cli \
)
endef
define Build/Compile/supplicant
+$(call Build/RunMake,wpa_supplicant, \
wpa_cli wpa_supplicant \
)
endef
define Build/Compile/supplicant-full-internal
+$(call Build/RunMake,wpa_supplicant, \
eapol_test \
)
endef
define Build/Compile/supplicant-full-openssl
+$(call Build/RunMake,wpa_supplicant, \
eapol_test \
)
endef
define Build/Compile/supplicant-full-wolfssl
+$(call Build/RunMake,wpa_supplicant, \
eapol_test \
)
endef
define Build/Compile
$(Build/Compile/$(LOCAL_TYPE))
$(Build/Compile/$(BUILD_VARIANT))
endef
define Install/hostapd
$(INSTALL_DIR) $(1)/usr/sbin
endef
define Install/supplicant
$(INSTALL_DIR) $(1)/usr/sbin
endef
define Package/hostapd-common/install
$(INSTALL_DIR) $(1)/etc/capabilities $(1)/etc/rc.button $(1)/etc/hotplug.d/ieee80211 $(1)/etc/init.d $(1)/lib/netifd $(1)/usr/share/acl.d
$(INSTALL_BIN) ./files/dhcp-get-server.sh $(1)/lib/netifd/dhcp-get-server.sh
$(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/netifd/hostapd.sh
$(INSTALL_BIN) ./files/wpad.init $(1)/etc/init.d/wpad
$(INSTALL_BIN) ./files/wps-hotplug.sh $(1)/etc/rc.button/wps
$(INSTALL_DATA) ./files/wpad_acl.json $(1)/usr/share/acl.d
$(INSTALL_DATA) ./files/wpad.json $(1)/etc/capabilities
endef
define Package/hostapd/install
$(call Install/hostapd,$(1))
$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/
endef
Package/hostapd-basic/install = $(Package/hostapd/install)
Package/hostapd-basic-openssl/install = $(Package/hostapd/install)
Package/hostapd-basic-wolfssl/install = $(Package/hostapd/install)
Package/hostapd-mini/install = $(Package/hostapd/install)
Package/hostapd-openssl/install = $(Package/hostapd/install)
Package/hostapd-wolfssl/install = $(Package/hostapd/install)
ifneq ($(LOCAL_TYPE),supplicant)
define Package/hostapd-utils/install
$(INSTALL_DIR) $(1)/usr/sbin
$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/
endef
endif
define Package/wpad/install
$(call Install/hostapd,$(1))
$(call Install/supplicant,$(1))
$(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/
$(LN) wpad $(1)/usr/sbin/hostapd
$(LN) wpad $(1)/usr/sbin/wpa_supplicant
endef
Package/wpad-basic/install = $(Package/wpad/install)
Package/wpad-basic-openssl/install = $(Package/wpad/install)
Package/wpad-basic-wolfssl/install = $(Package/wpad/install)
Package/wpad-mini/install = $(Package/wpad/install)
Package/wpad-openssl/install = $(Package/wpad/install)
Package/wpad-wolfssl/install = $(Package/wpad/install)
Package/wpad-mesh-openssl/install = $(Package/wpad/install)
Package/wpad-mesh-wolfssl/install = $(Package/wpad/install)
define Package/wpa-supplicant/install
$(call Install/supplicant,$(1))
$(INSTALL_BIN) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant $(1)/usr/sbin/
endef
Package/wpa-supplicant-basic/install = $(Package/wpa-supplicant/install)
Package/wpa-supplicant-mini/install = $(Package/wpa-supplicant/install)
Package/wpa-supplicant-p2p/install = $(Package/wpa-supplicant/install)
Package/wpa-supplicant-openssl/install = $(Package/wpa-supplicant/install)
Package/wpa-supplicant-wolfssl/install = $(Package/wpa-supplicant/install)
Package/wpa-supplicant-mesh-openssl/install = $(Package/wpa-supplicant/install)
Package/wpa-supplicant-mesh-wolfssl/install = $(Package/wpa-supplicant/install)
ifneq ($(LOCAL_TYPE),hostapd)
define Package/wpa-cli/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/
endef
endif
ifeq ($(BUILD_VARIANT),supplicant-full-internal)
define Package/eapol-test/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
endef
endif
ifeq ($(BUILD_VARIANT),supplicant-full-openssl)
define Package/eapol-test-openssl/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
endef
endif
ifeq ($(BUILD_VARIANT),supplicant-full-wolfssl)
define Package/eapol-test-wolfssl/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
endef
endif
# Build hostapd-common before its dependents, to avoid
# spurious rebuilds when building multiple variants.
$(eval $(call BuildPackage,hostapd-common))
$(eval $(call BuildPackage,hostapd))
$(eval $(call BuildPackage,hostapd-basic))
$(eval $(call BuildPackage,hostapd-basic-openssl))
$(eval $(call BuildPackage,hostapd-basic-wolfssl))
$(eval $(call BuildPackage,hostapd-mini))
$(eval $(call BuildPackage,hostapd-openssl))
$(eval $(call BuildPackage,hostapd-wolfssl))
$(eval $(call BuildPackage,wpad))
$(eval $(call BuildPackage,wpad-mesh-openssl))
$(eval $(call BuildPackage,wpad-mesh-wolfssl))
$(eval $(call BuildPackage,wpad-basic))
$(eval $(call BuildPackage,wpad-basic-openssl))
$(eval $(call BuildPackage,wpad-basic-wolfssl))
$(eval $(call BuildPackage,wpad-mini))
$(eval $(call BuildPackage,wpad-openssl))
$(eval $(call BuildPackage,wpad-wolfssl))
$(eval $(call BuildPackage,wpa-supplicant))
$(eval $(call BuildPackage,wpa-supplicant-mesh-openssl))
$(eval $(call BuildPackage,wpa-supplicant-mesh-wolfssl))
$(eval $(call BuildPackage,wpa-supplicant-basic))
$(eval $(call BuildPackage,wpa-supplicant-mini))
$(eval $(call BuildPackage,wpa-supplicant-p2p))
$(eval $(call BuildPackage,wpa-supplicant-openssl))
$(eval $(call BuildPackage,wpa-supplicant-wolfssl))
$(eval $(call BuildPackage,wpa-cli))
$(eval $(call BuildPackage,hostapd-utils))
$(eval $(call BuildPackage,eapol-test))
$(eval $(call BuildPackage,eapol-test-openssl))
$(eval $(call BuildPackage,eapol-test-wolfssl))
Reference in New Issue View Git Blame Copy Permalink