298977887/lede
1
0
Fork 0
mirror of https://github.com/coolsnowwolf/lede.git synced 2025-04-16 04:13:31 +00:00
Code Issues Packages Projects Releases Wiki Activity

Revert "kernel: bump 6.1 to 6.1.111"

Browse Source 
This reverts commit 718ac376b9.
This commit is contained in:
aiamadeus 2024-10-13 20:18:27 +08:00
parent ce88975693
commit 972664bd05
27 changed files with 1808 additions and 1214 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1193
target/linux/qualcommax/files-6.1/arch/arm64/boot/dts/qcom/ipq6018.dtsi
View File

File diff suppressed because it is too large Load Diff

28
target/linux/qualcommax/patches-6.1/0008-v6.2-arm64-dts-qcom-ipq6018-fix-NAND-node-name.patch Normal file
View File

@ -0,0 +1,28 @@
From 8857b0ab6a562c473c5bded0efda9390b82a84d4 Mon Sep 17 00:00:00 2001
From: Robert Marko <robimarko@gmail.com>
Date: Tue, 27 Sep 2022 22:12:17 +0200
Subject: [PATCH] arm64: dts: qcom: ipq6018: fix NAND node name
Per schema it should be nand-controller@79b0000 instead of nand@79b0000.
Fix it to match nand-controller.yaml requirements.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927201218.1264506-1-robimarko@gmail.com
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -348,7 +348,7 @@
status = "disabled";
};
- qpic_nand: nand@79b0000 {
+ qpic_nand: nand-controller@79b0000 {
compatible = "qcom,ipq6018-nand";
reg = <0x0 0x079b0000 0x0 0x10000>;
#address-cells = <1>;

19
target/linux/qualcommax/patches-6.1/0018-v6.2-arm64-dts-qcom-ipq6018-align-TLMM-pin-configuration-.patch
View File

@ -35,3 +35,22 @@ Link: https://lore.kernel.org/r/20221006124659.217540-3-krzysztof.kozlowski@lina
pins = "gpio38", "gpio39", "gpio40", "gpio41";
function = "blsp0_spi";
drive-strength = <8>;
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -218,14 +218,14 @@
interrupt-controller;
#interrupt-cells = <2>;
- serial_3_pins: serial3-pinmux {
+ serial_3_pins: serial3-state {
pins = "gpio44", "gpio45";
function = "blsp2_uart";
drive-strength = <8>;
bias-pull-down;
};
- qpic_pins: qpic-pins {
+ qpic_pins: qpic-state {
pins = "gpio1", "gpio3", "gpio4",
"gpio5", "gpio6", "gpio7",
"gpio8", "gpio10", "gpio11",

52
target/linux/qualcommax/patches-6.1/0033-v6.2-arm64-dts-qcom-ipq6018-move-ARMv8-timer-out-of-SoC.patch Normal file
View File

@ -0,0 +1,52 @@
From feeef118fda562cf9081edef8ad464d89db070f4 Mon Sep 17 00:00:00 2001
From: Robert Marko <robimarko@gmail.com>
Date: Tue, 27 Sep 2022 22:12:18 +0200
Subject: [PATCH] arm64: dts: qcom: ipq6018: move ARMv8 timer out of SoC node
The ARM timer is usually considered not part of SoC node, just like
other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning:
arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'}
From schema: dtschema/schemas/simple-bus.yaml
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927201218.1264506-2-robimarko@gmail.com
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -510,14 +510,6 @@
clock-names = "xo";
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
timer@b120000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -770,6 +762,14 @@
};
};
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
wcss: wcss-smp2p {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;

607
target/linux/qualcommax/patches-6.1/0034-v6.3-arm64-dts-qcom-ipq6018-Sort-nodes-properly.patch Normal file
View File

@ -0,0 +1,607 @@
From 2c6e322a41c5e1ca45be50b9d5fbcda62dc23a0d Mon Sep 17 00:00:00 2001
From: Konrad Dybcio <konrad.dybcio@linaro.org>
Date: Mon, 2 Jan 2023 10:46:28 +0100
Subject: [PATCH] arm64: dts: qcom: ipq6018: Sort nodes properly
Order nodes by unit address if one exists and alphabetically otherwise.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-4-konrad.dybcio@linaro.org
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 562 +++++++++++++-------------
1 file changed, 281 insertions(+), 281 deletions(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -87,6 +87,12 @@
};
};
+ firmware {
+ scm {
+ compatible = "qcom,scm-ipq6018", "qcom,scm";
+ };
+ };
+
cpu_opp_table: opp-table-cpu {
compatible = "operating-points-v2";
opp-shared;
@@ -123,12 +129,6 @@
};
};
- firmware {
- scm {
- compatible = "qcom,scm-ipq6018", "qcom,scm";
- };
- };
-
pmuv8: pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
@@ -166,6 +166,28 @@
};
};
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: glink-channel {
+ compatible = "qcom,rpm-ipq6018";
+ qcom,glink-channels = "rpm_requests";
+
+ regulators {
+ compatible = "qcom,rpm-mp5496-regulators";
+
+ ipq6018_s2: s2 {
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1062500>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
@@ -179,6 +201,102 @@
dma-ranges;
compatible = "simple-bus";
+ qusb_phy_1: qusb@59000 {
+ compatible = "qcom,ipq6018-qusb2-phy";
+ reg = <0x0 0x00059000 0x0 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+ <&xo>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+ status = "disabled";
+ };
+
+ ssphy_0: ssphy@78000 {
+ compatible = "qcom,ipq6018-qmp-usb3-phy";
+ reg = <0x0 0x00078000 0x0 0x1c4>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB0_AUX_CLK>,
+ <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_USB0_PHY_BCR>,
+ <&gcc GCC_USB3PHY_0_PHY_BCR>;
+ reset-names = "phy","common";
+ status = "disabled";
+
+ usb0_ssphy: phy@78200 {
+ reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
+ <0x0 0x00078400 0x0 0x200>, /* Rx */
+ <0x0 0x00078800 0x0 0x1f8>, /* PCS */
+ <0x0 0x00078600 0x0 0x044>; /* PCS misc */
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB0_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "gcc_usb0_pipe_clk_src";
+ };
+ };
+
+ qusb_phy_0: qusb@79000 {
+ compatible = "qcom,ipq6018-qusb2-phy";
+ reg = <0x0 0x00079000 0x0 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&xo>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+ status = "disabled";
+ };
+
+ pcie_phy: phy@84000 {
+ compatible = "qcom,ipq6018-qmp-pcie-phy";
+ reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
+ status = "disabled";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+ <&gcc GCC_PCIE0_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ resets = <&gcc GCC_PCIE0_PHY_BCR>,
+ <&gcc GCC_PCIE0PHY_PHY_BCR>;
+ reset-names = "phy",
+ "common";
+
+ pcie_phy0: phy@84200 {
+ reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
+ <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
+ <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
+ <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "gcc_pcie0_pipe_clk_src";
+ #clock-cells = <0>;
+ };
+ };
+
+ mdio: mdio@90000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio";
+ reg = <0x0 0x00090000 0x0 0x64>;
+ clocks = <&gcc GCC_MDIO_AHB_CLK>;
+ clock-names = "gcc_mdio_ahb_clk";
+ status = "disabled";
+ };
+
prng: qrng@e1000 {
compatible = "qcom,prng-ee";
reg = <0x0 0x000e3000 0x0 0x1000>;
@@ -257,6 +375,41 @@
reg = <0x0 0x01937000 0x0 0x21000>;
};
+ usb2: usb@70f8800 {
+ compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+ reg = <0x0 0x070F8800 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_USB1_MASTER_CLK>,
+ <&gcc GCC_USB1_SLEEP_CLK>,
+ <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+ clock-names = "core",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
+ <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+ assigned-clock-rates = <133330000>,
+ <24000000>;
+ resets = <&gcc GCC_USB1_BCR>;
+ status = "disabled";
+
+ dwc_1: usb@7000000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x07000000 0x0 0xcd00>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&qusb_phy_1>;
+ phy-names = "usb2-phy";
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ dr_mode = "host";
+ };
+ };
+
blsp_dma: dma-controller@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x0 0x07884000 0x0 0x2b000>;
@@ -366,6 +519,50 @@
status = "disabled";
};
+ usb3: usb@8af8800 {
+ compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+ reg = <0x0 0x08af8800 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+ <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_USB0_SLEEP_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+ <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ assigned-clock-rates = <133330000>,
+ <133330000>,
+ <24000000>;
+
+ resets = <&gcc GCC_USB0_BCR>;
+ status = "disabled";
+
+ dwc_0: usb@8a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x08a00000 0x0 0xcd00>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&qusb_phy_0>, <&usb0_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ clocks = <&xo>;
+ clock-names = "ref";
+ tx-fifo-resize;
+ snps,parkmode-disable-ss-quirk;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ dr_mode = "host";
+ };
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
#address-cells = <2>;
@@ -386,105 +583,6 @@
};
};
- pcie_phy: phy@84000 {
- compatible = "qcom,ipq6018-qmp-pcie-phy";
- reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
- status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- clocks = <&gcc GCC_PCIE0_AUX_CLK>,
- <&gcc GCC_PCIE0_AHB_CLK>;
- clock-names = "aux", "cfg_ahb";
-
- resets = <&gcc GCC_PCIE0_PHY_BCR>,
- <&gcc GCC_PCIE0PHY_PHY_BCR>;
- reset-names = "phy",
- "common";
-
- pcie_phy0: phy@84200 {
- reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
- <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
- <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
- <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "gcc_pcie0_pipe_clk_src";
- #clock-cells = <0>;
- };
- };
-
- pcie0: pci@20000000 {
- compatible = "qcom,pcie-ipq6018";
- reg = <0x0 0x20000000 0x0 0xf1d>,
- <0x0 0x20000f20 0x0 0xa8>,
- <0x0 0x20001000 0x0 0x1000>,
- <0x0 0x80000 0x0 0x4000>,
- <0x0 0x20100000 0x0 0x1000>;
- reg-names = "dbi", "elbi", "atu", "parf", "config";
-
- device_type = "pci";
- linux,pci-domain = <0>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- max-link-speed = <3>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- phys = <&pcie_phy0>;
- phy-names = "pciephy";
-
- ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
- <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>;
-
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 75
- IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 78
- IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 79
- IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 83
- IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
- <&gcc GCC_PCIE0_AXI_M_CLK>,
- <&gcc GCC_PCIE0_AXI_S_CLK>,
- <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
- <&gcc PCIE0_RCHNG_CLK>;
- clock-names = "iface",
- "axi_m",
- "axi_s",
- "axi_bridge",
- "rchng";
-
- resets = <&gcc GCC_PCIE0_PIPE_ARES>,
- <&gcc GCC_PCIE0_SLEEP_ARES>,
- <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
- <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
- <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
- <&gcc GCC_PCIE0_AHB_ARES>,
- <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
- <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
- reset-names = "pipe",
- "sleep",
- "sticky",
- "axi_m",
- "axi_s",
- "ahb",
- "axi_m_sticky",
- "axi_s_sticky";
-
- status = "disabled";
- };
-
watchdog@b017000 {
compatible = "qcom,kpss-wdt";
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
@@ -617,148 +715,74 @@
};
};
- mdio: mdio@90000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio";
- reg = <0x0 0x00090000 0x0 0x64>;
- clocks = <&gcc GCC_MDIO_AHB_CLK>;
- clock-names = "gcc_mdio_ahb_clk";
- status = "disabled";
- };
-
- qusb_phy_1: qusb@59000 {
- compatible = "qcom,ipq6018-qusb2-phy";
- reg = <0x0 0x00059000 0x0 0x180>;
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
- <&xo>;
- clock-names = "cfg_ahb", "ref";
-
- resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
- status = "disabled";
- };
-
- usb2: usb@70f8800 {
- compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
- reg = <0x0 0x070F8800 0x0 0x400>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- clocks = <&gcc GCC_USB1_MASTER_CLK>,
- <&gcc GCC_USB1_SLEEP_CLK>,
- <&gcc GCC_USB1_MOCK_UTMI_CLK>;
- clock-names = "core",
- "sleep",
- "mock_utmi";
-
- assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
- <&gcc GCC_USB1_MOCK_UTMI_CLK>;
- assigned-clock-rates = <133330000>,
- <24000000>;
- resets = <&gcc GCC_USB1_BCR>;
- status = "disabled";
-
- dwc_1: usb@7000000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x07000000 0x0 0xcd00>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&qusb_phy_1>;
- phy-names = "usb2-phy";
- tx-fifo-resize;
- snps,is-utmi-l1-suspend;
- snps,hird-threshold = /bits/ 8 <0x0>;
- snps,dis_u2_susphy_quirk;
- snps,dis_u3_susphy_quirk;
- dr_mode = "host";
- };
- };
+ pcie0: pci@20000000 {
+ compatible = "qcom,pcie-ipq6018";
+ reg = <0x0 0x20000000 0x0 0xf1d>,
+ <0x0 0x20000f20 0x0 0xa8>,
+ <0x0 0x20001000 0x0 0x1000>,
+ <0x0 0x80000 0x0 0x4000>,
+ <0x0 0x20100000 0x0 0x1000>;
+ reg-names = "dbi", "elbi", "atu", "parf", "config";
- ssphy_0: ssphy@78000 {
- compatible = "qcom,ipq6018-qmp-usb3-phy";
- reg = <0x0 0x00078000 0x0 0x1c4>;
- #address-cells = <2>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ max-link-speed = <3>;
+ #address-cells = <3>;
#size-cells = <2>;
- ranges;
- clocks = <&gcc GCC_USB0_AUX_CLK>,
- <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
- clock-names = "aux", "cfg_ahb", "ref";
-
- resets = <&gcc GCC_USB0_PHY_BCR>,
- <&gcc GCC_USB3PHY_0_PHY_BCR>;
- reset-names = "phy","common";
- status = "disabled";
-
- usb0_ssphy: phy@78200 {
- reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
- <0x0 0x00078400 0x0 0x200>, /* Rx */
- <0x0 0x00078800 0x0 0x1f8>, /* PCS */
- <0x0 0x00078600 0x0 0x044>; /* PCS misc */
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB0_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "gcc_usb0_pipe_clk_src";
- };
- };
-
- qusb_phy_0: qusb@79000 {
- compatible = "qcom,ipq6018-qusb2-phy";
- reg = <0x0 0x00079000 0x0 0x180>;
- #phy-cells = <0>;
+ phys = <&pcie_phy0>;
+ phy-names = "pciephy";
- clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
- <&xo>;
- clock-names = "cfg_ahb", "ref";
+ ranges = <0x81000000 0 0x20200000 0 0x20200000
+ 0 0x10000>, /* downstream I/O */
+ <0x82000000 0 0x20220000 0 0x20220000
+ 0 0xfde0000>; /* non-prefetchable memory */
- resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
- status = "disabled";
- };
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
- usb3: usb@8af8800 {
- compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
- reg = <0x0 0x8af8800 0x0 0x400>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 75
+ IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 78
+ IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 79
+ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 83
+ IRQ_TYPE_LEVEL_HIGH>; /* int_d */
- clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
- <&gcc GCC_USB0_MASTER_CLK>,
- <&gcc GCC_USB0_SLEEP_CLK>,
- <&gcc GCC_USB0_MOCK_UTMI_CLK>;
- clock-names = "cfg_noc",
- "core",
- "sleep",
- "mock_utmi";
+ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+ <&gcc GCC_PCIE0_AXI_M_CLK>,
+ <&gcc GCC_PCIE0_AXI_S_CLK>,
+ <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+ <&gcc PCIE0_RCHNG_CLK>;
+ clock-names = "iface",
+ "axi_m",
+ "axi_s",
+ "axi_bridge",
+ "rchng";
- assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
- <&gcc GCC_USB0_MASTER_CLK>,
- <&gcc GCC_USB0_MOCK_UTMI_CLK>;
- assigned-clock-rates = <133330000>,
- <133330000>,
- <24000000>;
+ resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+ <&gcc GCC_PCIE0_SLEEP_ARES>,
+ <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+ <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+ <&gcc GCC_PCIE0_AHB_ARES>,
+ <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
+ reset-names = "pipe",
+ "sleep",
+ "sticky",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "axi_m_sticky",
+ "axi_s_sticky";
- resets = <&gcc GCC_USB0_BCR>;
status = "disabled";
-
- dwc_0: usb@8a00000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x8a00000 0x0 0xcd00>;
- interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&qusb_phy_0>, <&usb0_ssphy>;
- phy-names = "usb2-phy", "usb3-phy";
- clocks = <&xo>;
- clock-names = "ref";
- tx-fifo-resize;
- snps,parkmode-disable-ss-quirk;
- snps,is-utmi-l1-suspend;
- snps,hird-threshold = /bits/ 8 <0x0>;
- snps,dis_u2_susphy_quirk;
- snps,dis_u3_susphy_quirk;
- dr_mode = "host";
- };
};
};
@@ -793,26 +817,4 @@
#interrupt-cells = <2>;
};
};
-
- rpm-glink {
- compatible = "qcom,glink-rpm";
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: glink-channel {
- compatible = "qcom,rpm-ipq6018";
- qcom,glink-channels = "rpm_requests";
-
- regulators {
- compatible = "qcom,rpm-mp5496-regulators";
-
- ipq6018_s2: s2 {
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1062500>;
- regulator-always-on;
- };
- };
- };
- };
};

92
target/linux/qualcommax/patches-6.1/0035-v6.3-arm64-dts-qcom-ipq6018-Add-remove-some-newlines.patch Normal file
View File

@ -0,0 +1,92 @@
From 6db9ed9a128cbae1423d043f3debd8bfa77783fd Mon Sep 17 00:00:00 2001
From: Konrad Dybcio <konrad.dybcio@linaro.org>
Date: Mon, 2 Jan 2023 10:46:29 +0100
Subject: [PATCH] arm64: dts: qcom: ipq6018: Add/remove some newlines
Some lines were broken very aggresively, presumably to fit under 80 chars
and some places could have used a newline, particularly between subsequent
nodes. Address all that and remove redundant comments near PCIe ranges
while at it so as not to exceed 100 chars needlessly.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-5-konrad.dybcio@linaro.org
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -102,26 +102,31 @@
opp-microvolt = <725000>;
clock-latency-ns = <200000>;
};
+
opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
opp-microvolt = <787500>;
clock-latency-ns = <200000>;
};
+
opp-1320000000 {
opp-hz = /bits/ 64 <1320000000>;
opp-microvolt = <862500>;
clock-latency-ns = <200000>;
};
+
opp-1440000000 {
opp-hz = /bits/ 64 <1440000000>;
opp-microvolt = <925000>;
clock-latency-ns = <200000>;
};
+
opp-1608000000 {
opp-hz = /bits/ 64 <1608000000>;
opp-microvolt = <987500>;
clock-latency-ns = <200000>;
};
+
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1062500>;
@@ -131,8 +136,7 @@
pmuv8: pmu {
compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
psci: psci {
@@ -735,24 +739,18 @@
phys = <&pcie_phy0>;
phy-names = "pciephy";
- ranges = <0x81000000 0 0x20200000 0 0x20200000
- 0 0x10000>, /* downstream I/O */
- <0x82000000 0 0x20220000 0 0x20220000
- 0 0xfde0000>; /* non-prefetchable memory */
+ ranges = <0x81000000 0 0x20200000 0 0x20200000 0 0x10000>,
+ <0x82000000 0 0x20220000 0 0x20220000 0 0xfde0000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 75
- IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 78
- IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 79
- IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 83
- IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
<&gcc GCC_PCIE0_AXI_M_CLK>,

25
target/linux/qualcommax/patches-6.1/0036-v6.3-arm64-dts-qcom-ipq6018-Use-lowercase-hex.patch Normal file
View File

@ -0,0 +1,25 @@
From 7356ae3e10abd1d71f06ff0b8a8e72aa7c955c57 Mon Sep 17 00:00:00 2001
From: Konrad Dybcio <konrad.dybcio@linaro.org>
Date: Mon, 2 Jan 2023 10:46:30 +0100
Subject: [PATCH] arm64: dts: qcom: ipq6018: Use lowercase hex
One value escaped my previous lowercase hexification. Take care of it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-6-konrad.dybcio@linaro.org
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -381,7 +381,7 @@
usb2: usb@70f8800 {
compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
- reg = <0x0 0x070F8800 0x0 0x400>;
+ reg = <0x0 0x070f8800 0x0 0x400>;
#address-cells = <2>;
#size-cells = <2>;
ranges;

28
target/linux/qualcommax/patches-6.1/0037-v6.3-arm64-dts-qcom-ipq6018-align-RPM-G-Link-node-with.patch Normal file
View File

@ -0,0 +1,28 @@
From 679ee73bbee28cab441008f8cca38160cc8f3d05 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Wed, 8 Feb 2023 11:15:39 +0100
Subject: [PATCH] arm64: dts: qcom: ipq6018: align RPM G-Link node with
bindings
Bindings expect (and most of DTS use) the RPM G-Link node name to be
"rpm-requests".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-1-krzysztof.kozlowski@linaro.org
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -176,7 +176,7 @@
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
- rpm_requests: glink-channel {
+ rpm_requests: rpm-requests {
compatible = "qcom,rpm-ipq6018";
qcom,glink-channels = "rpm_requests";

34
target/linux/qualcommax/patches-6.1/0039-v6.5-arm64-dts-qcom-add-few-more-reserved-memory-region.patch
View File

@ -24,6 +24,40 @@ Link: https://lore.kernel.org/r/20230526110653.27777-4-quic_viswanat@quicinc.com
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 14 ++++++++++++--
2 files changed, 25 insertions(+), 5 deletions(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -154,18 +154,28 @@
no-map;
};
+ bootloader@4a100000 {
+ reg = <0x0 0x4a100000 0x0 0x400000>;
+ no-map;
+ };
+
+ sbl@4a500000 {
+ reg = <0x0 0x4a500000 0x0 0x100000>;
+ no-map;
+ };
+
tz: memory@4a600000 {
- reg = <0x0 0x4a600000 0x0 0x00400000>;
+ reg = <0x0 0x4a600000 0x0 0x400000>;
no-map;
};
smem_region: memory@4aa00000 {
- reg = <0x0 0x4aa00000 0x0 0x00100000>;
+ reg = <0x0 0x4aa00000 0x0 0x100000>;
no-map;
};
q6_region: memory@4ab00000 {
- reg = <0x0 0x4ab00000 0x0 0x05500000>;
+ reg = <0x0 0x4ab00000 0x0 0x5500000>;
no-map;
};
};
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -85,17 +85,27 @@

10
target/linux/qualcommax/patches-6.1/0040-v6.5-arm64-dts-qcom-enable-the-download-mode-support.patch
View File

@ -15,6 +15,16 @@ Link: https://lore.kernel.org/r/20230526110653.27777-3-quic_viswanat@quicinc.com
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 6 ++++++
2 files changed, 7 insertions(+)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -90,6 +90,7 @@
firmware {
scm {
compatible = "qcom,scm-ipq6018", "qcom,scm";
+ qcom,dload-mode = <&tcsr 0x6100>;
};
};
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -112,6 +112,7 @@

29
target/linux/qualcommax/patches-6.1/0041-v6.5-arm64-dts-qcom-ipq6018-correct-qrng-unit-address.patch Normal file
View File

@ -0,0 +1,29 @@
From 085058786a7890dd44ec623fe5ac74db870f6b93 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Wed, 19 Apr 2023 23:18:39 +0200
Subject: [PATCH] arm64: dts: qcom: ipq6018: correct qrng unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc/qrng@e1000: simple-bus unit address format error, expected "e3000"
Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-1-krzysztof.kozlowski@linaro.org
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -312,7 +312,7 @@
status = "disabled";
};
- prng: qrng@e1000 {
+ prng: qrng@e3000 {
compatible = "qcom,prng-ee";
reg = <0x0 0x000e3000 0x0 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;

28
target/linux/qualcommax/patches-6.1/0042-v6.5-arm64-dts-qcom-ipq6018-add-unit-address-to-soc-node.patch Normal file
View File

@ -0,0 +1,28 @@
From 393595d4ffbd0a1fafd5548f8de1b8487a037cf2 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Thu, 20 Apr 2023 08:36:04 +0200
Subject: [PATCH] arm64: dts: qcom: ipq6018: add unit address to soc node
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-1-krzysztof.kozlowski@linaro.org
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -209,7 +209,7 @@
hwlocks = <&tcsr_mutex 3>;
};
- soc: soc {
+ soc: soc@0 {
#address-cells = <2>;
#size-cells = <2>;
ranges = <0 0 0 0 0x0 0xffffffff>;

34
target/linux/qualcommax/patches-6.1/0043-v6.5-arm64-dts-qcom-ipq6018-add-QFPROM-node.patch Normal file
View File

@ -0,0 +1,34 @@
From 546f0617a22a481f3ca1f7e058aea0c40517c64e Mon Sep 17 00:00:00 2001
From: Kathiravan T <quic_kathirav@quicinc.com>
Date: Fri, 26 May 2023 18:23:04 +0530
Subject: [PATCH] arm64: dts: qcom: ipq6018: add QFPROM node
IPQ6018 has efuse region to determine the various HW quirks. Lets
add the initial support and the individual fuses will be added as they
are required.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526125305.19626-4-quic_kathirav@quicinc.com
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -312,6 +312,13 @@
status = "disabled";
};
+ qfprom: efuse@a4000 {
+ compatible = "qcom,ipq6018-qfprom", "qcom,qfprom";
+ reg = <0x0 0x000a4000 0x0 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
prng: qrng@e3000 {
compatible = "qcom,prng-ee";
reg = <0x0 0x000e3000 0x0 0x1000>;

37
target/linux/qualcommax/patches-6.1/0044-v6.5-arm64-dts-qcom-ipq6018-drop-incorrect-SPI-bus.patch Normal file
View File

@ -0,0 +1,37 @@
From b8420d478aa3fc739fcdba6b4b945850b356cb3b Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun, 16 Apr 2023 14:37:25 +0200
Subject: [PATCH] arm64: dts: qcom: ipq6018: drop incorrect SPI bus
spi-max-frequency
The spi-max-frequency property belongs to SPI devices, not SPI
controller:
ipq6018-cp01-c1.dtb: spi@78b5000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416123730.300863-1-krzysztof.kozlowski@linaro.org
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 --
1 file changed, 2 deletions(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -458,7 +458,6 @@
#size-cells = <0>;
reg = <0x0 0x078b5000 0x0 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- spi-max-frequency = <50000000>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
@@ -473,7 +472,6 @@
#size-cells = <0>;
reg = <0x0 0x078b6000 0x0 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- spi-max-frequency = <50000000>;
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";

93
target/linux/qualcommax/patches-6.1/0051-v6.6-arm64-dts-qcom-Add-rpm-proc-node-for-GLINK.patch Normal file
View File

@ -0,0 +1,93 @@
From 7e1acc8b92a3b67db1e5255adae2851d58d74434 Mon Sep 17 00:00:00 2001
From: Stephan Gerhold <stephan@gerhold.net>
Date: Thu, 15 Jun 2023 18:50:44 +0200
Subject: [PATCH] arm64: dts: qcom: Add rpm-proc node for GLINK gplatforms
Rather than having the RPM GLINK channels as the only child of a dummy
top-level rpm-glink node, switch to representing the RPM as remoteproc
like all the other remoteprocs (modem DSP, ...).
This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6375
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-11-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 48 ++++----
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 28 +++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 113 +++++++++----------
arch/arm64/boot/dts/qcom/msm8998.dtsi | 102 ++++++++---------
arch/arm64/boot/dts/qcom/qcm2290.dtsi | 126 ++++++++++-----------
arch/arm64/boot/dts/qcom/qcs404.dtsi | 152 +++++++++++++-------------
arch/arm64/boot/dts/qcom/sdm630.dtsi | 132 +++++++++++-----------
arch/arm64/boot/dts/qcom/sm6115.dtsi | 128 +++++++++++-----------
arch/arm64/boot/dts/qcom/sm6125.dtsi | 140 ++++++++++++------------
arch/arm64/boot/dts/qcom/sm6375.dtsi | 126 ++++++++++-----------
10 files changed, 566 insertions(+), 529 deletions(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -145,6 +145,32 @@
method = "smc";
};
+ rpm: remoteproc {
+ compatible = "qcom,ipq6018-rpm-proc", "qcom,rpm-proc";
+
+ glink-edge {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-ipq6018";
+ qcom,glink-channels = "rpm_requests";
+
+ regulators {
+ compatible = "qcom,rpm-mp5496-regulators";
+
+ ipq6018_s2: s2 {
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1062500>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -181,28 +207,6 @@
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-ipq6018";
- qcom,glink-channels = "rpm_requests";
-
- regulators {
- compatible = "qcom,rpm-mp5496-regulators";
-
- ipq6018_s2: s2 {
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1062500>;
- regulator-always-on;
- };
- };
- };
- };
-
smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;

35
target/linux/qualcommax/patches-6.1/0052-v6.7-arm64-dts-qcom-ipq6018-include-the-GPLL0-as.patch Normal file
View File

@ -0,0 +1,35 @@
From 0133c7af3aa0420778d106cb90db708cfa45f2c6 Mon Sep 17 00:00:00 2001
From: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Date: Thu, 14 Sep 2023 12:29:59 +0530
Subject: [PATCH] arm64: dts: qcom: ipq6018: include the GPLL0 as clock
provider for mailbox
While the kernel is booting up, APSS clock / CPU clock will be running
at 800MHz with GPLL0 as source. Once the cpufreq driver is available,
APSS PLL will be configured to the rate based on the opp table and the
source also will be changed to APSS_PLL_EARLY. So allow the mailbox to
consume the GPLL0, with this inclusion, CPU Freq correctly reports that
CPU is running at 800MHz rather than 24MHz.
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-9-c8ceb1a37680@quicinc.com
[bjorn: Updated commit message, as requested by Kathiravan]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -619,8 +619,8 @@
compatible = "qcom,ipq6018-apcs-apps-global";
reg = <0x0 0x0b111000 0x0 0x1000>;
#clock-cells = <1>;
- clocks = <&a53pll>, <&xo>;
- clock-names = "pll", "xo";
+ clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+ clock-names = "pll", "xo", "gpll0";
#mbox-cells = <1>;
};

85
target/linux/qualcommax/patches-6.1/0054-v6.8-arm64-dts-qcom-ipq6018-use-CPUFreq-NVMEM.patch Normal file
View File

@ -0,0 +1,85 @@
From 83afcf14edb9217e58837eb119da96d734a4b3b1 Mon Sep 17 00:00:00 2001
From: Robert Marko <robimarko@gmail.com>
Date: Sat, 21 Oct 2023 14:00:07 +0200
Subject: [PATCH] arm64: dts: qcom: ipq6018: use CPUFreq NVMEM
IPQ6018 comes in multiple SKU-s and some of them dont support all of the
OPP-s that are current set, so lets utilize CPUFreq NVMEM to allow only
supported OPP-s based on the SoC dynamically.
As an example, IPQ6018 is generaly rated at 1.8GHz but some silicon only
goes up to 1.5GHz and is marked as such via an eFuse.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231021120048.231239-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -95,42 +95,49 @@
};
cpu_opp_table: opp-table-cpu {
- compatible = "operating-points-v2";
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&cpu_speed_bin>;
opp-shared;
opp-864000000 {
opp-hz = /bits/ 64 <864000000>;
opp-microvolt = <725000>;
+ opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
};
opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
opp-microvolt = <787500>;
+ opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
};
opp-1320000000 {
opp-hz = /bits/ 64 <1320000000>;
opp-microvolt = <862500>;
+ opp-supported-hw = <0x3>;
clock-latency-ns = <200000>;
};
opp-1440000000 {
opp-hz = /bits/ 64 <1440000000>;
opp-microvolt = <925000>;
+ opp-supported-hw = <0x3>;
clock-latency-ns = <200000>;
};
opp-1608000000 {
opp-hz = /bits/ 64 <1608000000>;
opp-microvolt = <987500>;
+ opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1062500>;
+ opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
};
@@ -321,6 +328,11 @@
reg = <0x0 0x000a4000 0x0 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ cpu_speed_bin: cpu-speed-bin@135 {
+ reg = <0x135 0x1>;
+ bits = <7 1>;
+ };
};
prng: qrng@e3000 {

45
target/linux/qualcommax/patches-6.1/0105-arm64-dts-qcom-ipq6018-add-pwm-node.patch Normal file
View File

@ -0,0 +1,45 @@
From b4a32d218d424b81a58fbd419e1114b1c1f76168 Mon Sep 17 00:00:00 2001
From: Devi Priya <quic_devipriy@quicinc.com>
Date: Thu, 5 Oct 2023 21:35:50 +0530
Subject: [PATCH] pwm: driver for qualcomm ipq6018 pwm block
Describe the PWM block on IPQ6018.
The PWM is in the TCSR area. Make &tcsr "simple-mfd" compatible, and add
&pwm as child of &tcsr.
Add also ipq6018 specific compatible string.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Baruch Siach <baruch.siach@siklu.com>
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -409,8 +409,21 @@
};
tcsr: syscon@1937000 {
- compatible = "qcom,tcsr-ipq6018", "syscon";
+ compatible = "qcom,tcsr-ipq6018", "syscon", "simple-mfd";
reg = <0x0 0x01937000 0x0 0x21000>;
+ ranges = <0x0 0x0 0x01937000 0x21000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pwm: pwm@a010 {
+ compatible = "qcom,ipq6018-pwm";
+ reg = <0xa010 0x20>;
+ clocks = <&gcc GCC_ADSS_PWM_CLK>;
+ assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>;
+ assigned-clock-rates = <100000000>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
};
usb2: usb@70f8800 {

66
target/linux/qualcommax/patches-6.1/0109-arm64-dts-ipq6018-Add-remaining-QUP-UART-node.patch Normal file
View File

@ -0,0 +1,66 @@
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -471,6 +471,26 @@
qcom,ee = <0>;
};
+ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x78af000 0x0 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp1_uart2: serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x78b0000 0x0 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_uart3: serial@78b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x0 0x078b1000 0x0 0x200>;
@@ -479,6 +499,36 @@
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
+ };
+
+ blsp1_uart4: serial@78b2000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x078b2000 0x0 0x200>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp1_uart5: serial@78b3000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x78b3000 0x0 0x200>;
+ interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp1_uart6: serial@78b4000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x078b4000 0x0 0x200>;
+ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
};
blsp1_spi1: spi@78b5000 {

29
target/linux/qualcommax/patches-6.1/0132-ipq6018-rproc-Add-non-secure-Q6-bringup-sequence.patch
View File

@ -12,6 +12,35 @@ Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
drivers/remoteproc/qcom_q6v5_wcss.c | 235 +++++++++++++++++++++++---
2 files changed, 232 insertions(+), 23 deletions(-)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -790,8 +790,24 @@
"wcss_reset",
"wcss_q6_reset";
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
- clock-names = "prng";
+ clocks = <&gcc GCC_PRNG_AHB_CLK>,
+ <&gcc GCC_SYS_NOC_WCSS_AHB_CLK>,
+ <&gcc GCC_Q6SS_ATBM_CLK>,
+ <&gcc GCC_Q6SS_PCLKDBG_CLK>,
+ <&gcc GCC_Q6_TSCTR_1TO2_CLK>;
+ clock-names = "prng",
+ "gcc_sys_noc_wcss_ahb_clk",
+ "gcc_q6ss_atbm_clk",
+ "gcc_q6ss_pclkdbg_clk",
+ "gcc_q6_tsctr_1to2_clk";
+ assigned-clocks = <&gcc GCC_SYS_NOC_WCSS_AHB_CLK>,
+ <&gcc GCC_Q6SS_PCLKDBG_CLK>,
+ <&gcc GCC_Q6_TSCTR_1TO2_CLK>,
+ <&gcc GCC_Q6SS_ATBM_CLK>;
+ assigned-clock-rates = <133333333>,
+ <600000000>,
+ <600000000>,
+ <240000000>;
qcom,halt-regs = <&tcsr 0x18000 0x1b000 0xe000>;
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -12,6 +12,7 @@

122
target/linux/qualcommax/patches-6.1/0133-arm64-dts-ipq6018-Add-WLAN-node.patch Normal file
View File

@ -0,0 +1,122 @@
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -765,6 +765,119 @@
};
};
+ wifi: wifi@c000000 {
+ compatible = "qcom,ipq6018-wifi";
+ reg = <0x0 0xc000000 0x0 0x1000000>;
+
+ interrupts = <0 320 IRQ_TYPE_EDGE_RISING>,
+ <0 319 IRQ_TYPE_EDGE_RISING>,
+ <0 318 IRQ_TYPE_EDGE_RISING>,
+ <0 316 IRQ_TYPE_EDGE_RISING>,
+ <0 315 IRQ_TYPE_EDGE_RISING>,
+ <0 314 IRQ_TYPE_EDGE_RISING>,
+ <0 311 IRQ_TYPE_EDGE_RISING>,
+ <0 310 IRQ_TYPE_EDGE_RISING>,
+ <0 411 IRQ_TYPE_EDGE_RISING>,
+ <0 410 IRQ_TYPE_EDGE_RISING>,
+ <0 40 IRQ_TYPE_EDGE_RISING>,
+ <0 39 IRQ_TYPE_EDGE_RISING>,
+ <0 302 IRQ_TYPE_EDGE_RISING>,
+ <0 301 IRQ_TYPE_EDGE_RISING>,
+ <0 37 IRQ_TYPE_EDGE_RISING>,
+ <0 36 IRQ_TYPE_EDGE_RISING>,
+ <0 296 IRQ_TYPE_EDGE_RISING>,
+ <0 295 IRQ_TYPE_EDGE_RISING>,
+ <0 294 IRQ_TYPE_EDGE_RISING>,
+ <0 293 IRQ_TYPE_EDGE_RISING>,
+ <0 292 IRQ_TYPE_EDGE_RISING>,
+ <0 291 IRQ_TYPE_EDGE_RISING>,
+ <0 290 IRQ_TYPE_EDGE_RISING>,
+ <0 289 IRQ_TYPE_EDGE_RISING>,
+ <0 288 IRQ_TYPE_EDGE_RISING>,
+ <0 239 IRQ_TYPE_EDGE_RISING>,
+ <0 236 IRQ_TYPE_EDGE_RISING>,
+ <0 235 IRQ_TYPE_EDGE_RISING>,
+ <0 234 IRQ_TYPE_EDGE_RISING>,
+ <0 233 IRQ_TYPE_EDGE_RISING>,
+ <0 232 IRQ_TYPE_EDGE_RISING>,
+ <0 231 IRQ_TYPE_EDGE_RISING>,
+ <0 230 IRQ_TYPE_EDGE_RISING>,
+ <0 229 IRQ_TYPE_EDGE_RISING>,
+ <0 228 IRQ_TYPE_EDGE_RISING>,
+ <0 224 IRQ_TYPE_EDGE_RISING>,
+ <0 223 IRQ_TYPE_EDGE_RISING>,
+ <0 203 IRQ_TYPE_EDGE_RISING>,
+ <0 183 IRQ_TYPE_EDGE_RISING>,
+ <0 180 IRQ_TYPE_EDGE_RISING>,
+ <0 179 IRQ_TYPE_EDGE_RISING>,
+ <0 178 IRQ_TYPE_EDGE_RISING>,
+ <0 177 IRQ_TYPE_EDGE_RISING>,
+ <0 176 IRQ_TYPE_EDGE_RISING>,
+ <0 163 IRQ_TYPE_EDGE_RISING>,
+ <0 162 IRQ_TYPE_EDGE_RISING>,
+ <0 160 IRQ_TYPE_EDGE_RISING>,
+ <0 414 IRQ_TYPE_EDGE_RISING>,
+ <0 159 IRQ_TYPE_EDGE_RISING>,
+ <0 158 IRQ_TYPE_EDGE_RISING>,
+ <0 157 IRQ_TYPE_EDGE_RISING>,
+ <0 156 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "misc-pulse1",
+ "misc-latch",
+ "sw-exception",
+ "ce0",
+ "ce1",
+ "ce2",
+ "ce3",
+ "ce4",
+ "ce5",
+ "ce6",
+ "ce7",
+ "ce8",
+ "ce9",
+ "ce10",
+ "ce11",
+ "host2wbm-desc-feed",
+ "host2reo-re-injection",
+ "host2reo-command",
+ "host2rxdma-monitor-ring3",
+ "host2rxdma-monitor-ring2",
+ "host2rxdma-monitor-ring1",
+ "reo2ost-exception",
+ "wbm2host-rx-release",
+ "reo2host-status",
+ "reo2host-destination-ring4",
+ "reo2host-destination-ring3",
+ "reo2host-destination-ring2",
+ "reo2host-destination-ring1",
+ "rxdma2host-monitor-destination-mac3",
+ "rxdma2host-monitor-destination-mac2",
+ "rxdma2host-monitor-destination-mac1",
+ "ppdu-end-interrupts-mac3",
+ "ppdu-end-interrupts-mac2",
+ "ppdu-end-interrupts-mac1",
+ "rxdma2host-monitor-status-ring-mac3",
+ "rxdma2host-monitor-status-ring-mac2",
+ "rxdma2host-monitor-status-ring-mac1",
+ "host2rxdma-host-buf-ring-mac3",
+ "host2rxdma-host-buf-ring-mac2",
+ "host2rxdma-host-buf-ring-mac1",
+ "rxdma2host-destination-ring-mac3",
+ "rxdma2host-destination-ring-mac2",
+ "rxdma2host-destination-ring-mac1",
+ "host2tcl-input-ring4",
+ "host2tcl-input-ring3",
+ "host2tcl-input-ring2",
+ "host2tcl-input-ring1",
+ "wbm2host-tx-completions-ring4",
+ "wbm2host-tx-completions-ring3",
+ "wbm2host-tx-completions-ring2",
+ "wbm2host-tx-completions-ring1",
+ "tcl2host-status-ring";
+ qcom,rproc = <&q6v5_wcss>;
+ status = "disabled";
+ };
+
q6v5_wcss: remoteproc@cd00000 {
compatible = "qcom,ipq6018-wcss-pil";
reg = <0x0 0x0cd00000 0x0 0x4040>,

24
target/linux/qualcommax/patches-6.1/0133-arm64-dts-ipq6018-add-reserved-memory-nodes.patch Normal file
View File

@ -0,0 +1,24 @@
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -212,6 +212,21 @@
reg = <0x0 0x4ab00000 0x0 0x5500000>;
no-map;
};
+
+ nss_region: nss@40000000 {
+ no-map;
+ reg = <0x0 0x40000000 0x0 0x01000000>;
+ };
+
+ q6_etr_region: q6_etr_dump@50000000 {
+ reg = <0x0 0x50000000 0x0 0x100000>;
+ no-map;
+ };
+
+ m3_dump_region: m3_dump@50100000 {
+ reg = <0x0 0x50100000 0x0 0x100000>;
+ no-map;
+ };
};
smem {

29
target/linux/qualcommax/patches-6.1/0135-arm64-dts-qcom-ipq6018-enable-sdhci-node.patch Normal file
View File

@ -0,0 +1,29 @@
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -476,6 +476,26 @@
};
};
+ sdhc: mmc@7804000 {
+ compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x0 0x7804000 0x0 0x1000>,
+ <0x0 0x7805000 0x0 0x1000>;
+ reg-names = "hc", "cqhci";
+
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo>;
+ clock-names = "iface", "core", "xo";
+ resets = <&gcc GCC_SDCC1_BCR>;
+ max-frequency = <192000000>;
+
+ status = "disabled";
+ };
+
blsp_dma: dma-controller@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x0 0x07884000 0x0 0x2b000>;

146
target/linux/qualcommax/patches-6.1/0136-arm64-dts-qcom-ipq6018-add-thermal-nodes.patch Normal file
View File

@ -0,0 +1,146 @@
From d2e727bd0a259de2d6d329e3c659b8a1b6fbbc8b Mon Sep 17 00:00:00 2001
From: Robert Marko <robimarko@gmail.com>
Date: Sun, 15 Oct 2023 22:55:43 +0200
Subject: [PATCH] arm64: dts: qcom: ipq6018: add thermal nodes
IPQ6018 has a tsens v2.3.1 peripheral which monitors temperatures around
the various subsystems on the die.
Signed-off-by: Robert Marko <robimarko@gmail.com>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 117 ++++++++++++++++++++++++++
1 file changed, 117 insertions(+)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -357,6 +357,16 @@
clock-names = "core";
};
+ tsens: thermal-sensor@4a9000 {
+ compatible = "qcom,ipq6018-tsens", "qcom,ipq8074-tsens";
+ reg = <0x0 0x4a9000 0x0 0x1000>, /* TM */
+ <0x0 0x4a8000 0x0 0x1000>; /* SROT */
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "combined";
+ #qcom,sensors = <16>;
+ #thermal-sensor-cells = <1>;
+ };
+
cryptobam: dma-controller@704000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x0 0x00704000 0x0 0x20000>;
@@ -1043,6 +1053,113 @@
};
};
+ thermal-zones {
+ nss-top-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ nss-top-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ nss0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ nss-0-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ wcss-phya0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 7>;
+
+ trips {
+ wcss-phya0-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ wcss-phya1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 8>;
+
+ trips {
+ wcss-phya1-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster_thermal: cluster-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 13>;
+
+ trips {
+ cluster-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ lpass-qsdp6-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 14>;
+
+ trips {
+ lpass-qsdp6-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ package-top-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 15>;
+
+ trips {
+ package-top-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,

79
target/linux/qualcommax/patches-6.1/0137-arm64-dts-qcom-ipq6018-rework-cpufreq.patch
View File

@ -1,3 +1,82 @@
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -42,7 +42,6 @@
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
clock-names = "cpu";
operating-points-v2 = <&cpu_opp_table>;
- cpu-supply = <&ipq6018_s2>;
};
CPU1: cpu@1 {
@@ -54,7 +53,6 @@
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
clock-names = "cpu";
operating-points-v2 = <&cpu_opp_table>;
- cpu-supply = <&ipq6018_s2>;
};
CPU2: cpu@2 {
@@ -66,7 +64,6 @@
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
clock-names = "cpu";
operating-points-v2 = <&cpu_opp_table>;
- cpu-supply = <&ipq6018_s2>;
};
CPU3: cpu@3 {
@@ -78,7 +75,6 @@
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
clock-names = "cpu";
operating-points-v2 = <&cpu_opp_table>;
- cpu-supply = <&ipq6018_s2>;
};
L2_0: l2-cache {
@@ -113,6 +109,13 @@
clock-latency-ns = <200000>;
};
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <850000>;
+ opp-supported-hw = <0x4>;
+ clock-latency-ns = <200000>;
+ };
+
opp-1320000000 {
opp-hz = /bits/ 64 <1320000000>;
opp-microvolt = <862500>;
@@ -127,6 +130,13 @@
clock-latency-ns = <200000>;
};
+ opp-1512000000 {
+ opp-hz = /bits/ 64 <1512000000>;
+ opp-microvolt = <937500>;
+ opp-supported-hw = <0x2>;
+ clock-latency-ns = <200000>;
+ };
+
opp-1608000000 {
opp-hz = /bits/ 64 <1608000000>;
opp-microvolt = <987500>;
@@ -164,16 +174,6 @@
rpm_requests: rpm-requests {
compatible = "qcom,rpm-ipq6018";
qcom,glink-channels = "rpm_requests";
-
- regulators {
- compatible = "qcom,rpm-mp5496-regulators";
-
- ipq6018_s2: s2 {
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1062500>;
- regulator-always-on;
- };
- };
};
};
};
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq6018-mp5496.dtsi
@@ -0,0 +1,39 @@

42
target/linux/qualcommax/patches-6.1/0604-qca-add-mcs-support.patch
View File

@ -1,6 +1,6 @@
--- a/include/linux/if_bridge.h
+++ b/include/linux/if_bridge.h
@@ -258,4 +258,17 @@ extern br_get_dst_hook_t __rcu *br_get_d
@@ -260,4 +260,17 @@ extern br_get_dst_hook_t __rcu *br_get_d
extern struct net_device *br_fdb_bridge_dev_get_and_hold(struct net_bridge *br);
/* QCA NSS bridge-mgr support - End */
@ -20,7 +20,7 @@
#endif
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -263,7 +263,8 @@ static void fdb_notify(struct net_bridge
@@ -259,7 +259,8 @@ static void fdb_notify(struct net_bridge
kfree_skb(skb);
goto errout;
}
@ -30,7 +30,7 @@
return;
errout:
rtnl_set_sk_err(net, RTNLGRP_NEIGH, err);
@@ -329,6 +330,7 @@ struct net_bridge_fdb_entry *br_fdb_find
@@ -325,6 +326,7 @@ struct net_bridge_fdb_entry *br_fdb_find
{
return fdb_find_rcu(&br->fdb_hash_tbl, addr, vid);
}
@ -40,7 +40,7 @@
* added to the bridge private HW address list and all required ports
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -906,6 +906,7 @@ void br_manage_promisc(struct net_bridge
@@ -874,6 +874,7 @@ void br_manage_promisc(struct net_bridge
int nbp_backup_change(struct net_bridge_port *p, struct net_device *backup_dev);
/* br_input.c */
@ -48,7 +48,7 @@
int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb);
rx_handler_func_t *br_get_rx_handler(const struct net_device *dev);
@@ -2271,4 +2272,14 @@ bool br_is_neigh_suppress_enabled(const
@@ -2198,4 +2199,14 @@ struct nd_msg *br_is_nd_neigh_msg(struct
#define __br_get(__hook, __default, __args ...) \
(__hook ? (__hook(__args)) : (__default))
/* QCA NSS ECM support - End */
@ -65,7 +65,7 @@
#endif
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -656,6 +656,7 @@ void br_info_notify(int event, const str
@@ -641,6 +641,7 @@ void br_info_notify(int event, const str
kfree_skb(skb);
goto errout;
}
@ -75,7 +75,7 @@
errout:
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -472,6 +472,12 @@ static void __exit br_deinit(void)
@@ -471,6 +471,12 @@ static void __exit br_deinit(void)
br_fdb_fini();
}
@ -90,9 +90,9 @@
MODULE_LICENSE("GPL");
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -83,6 +83,12 @@ netdev_tx_t br_dev_xmit(struct sk_buff *
@@ -88,6 +88,12 @@ netdev_tx_t br_dev_xmit(struct sk_buff *
if (is_broadcast_ether_addr(dest)) {
br_flood(br, skb, BR_PKT_BROADCAST, false, true, vid);
br_flood(br, skb, BR_PKT_BROADCAST, false, true);
} else if (is_multicast_ether_addr(dest)) {
+ /* QCA qca-mcs support - Start */
+ br_multicast_handle_hook_t *multicast_handle_hook = rcu_dereference(br_multicast_handle_hook);
@ -101,13 +101,13 @@
+ /* QCA qca-mcs support - End */
+
if (unlikely(netpoll_tx_running(dev))) {
br_flood(br, skb, BR_PKT_MULTICAST, false, true, vid);
br_flood(br, skb, BR_PKT_MULTICAST, false, true);
goto out;
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -23,6 +23,16 @@
#include "br_private.h"
@@ -24,6 +24,16 @@
#include "br_private_tunnel.h"
#include "br_private_offload.h"
+/* QCA qca-mcs support - Start */
+/* Hook for external Multicast handler */
@ -122,7 +122,7 @@
static int
br_netif_receive_skb(struct net *net, struct sock *sk, struct sk_buff *skb)
{
@@ -30,7 +40,7 @@ br_netif_receive_skb(struct net *net, st
@@ -31,7 +41,7 @@ br_netif_receive_skb(struct net *net, st
return netif_receive_skb(skb);
}
@ -131,7 +131,7 @@
{
struct net_device *indev, *brdev = BR_INPUT_SKB_CB(skb)->brdev;
struct net_bridge *br = netdev_priv(brdev);
@@ -69,6 +79,7 @@ static int br_pass_frame_up(struct sk_bu
@@ -72,6 +82,7 @@ static int br_pass_frame_up(struct sk_bu
dev_net(indev), NULL, skb, indev, NULL,
br_netif_receive_skb);
}
@ -139,7 +139,7 @@
/* note: already called with rcu_read_lock */
int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
@@ -84,6 +95,11 @@ int br_handle_frame_finish(struct net *n
@@ -88,6 +99,11 @@ int br_handle_frame_finish(struct net *n
bool promisc;
u16 vid = 0;
u8 state;
@ -151,7 +151,7 @@
if (!p)
goto drop;
@@ -175,6 +191,11 @@ int br_handle_frame_finish(struct net *n
@@ -164,6 +180,11 @@ int br_handle_frame_finish(struct net *n
switch (pkt_type) {
case BR_PKT_MULTICAST:
@ -163,7 +163,7 @@
mdst = br_mdb_get(brmctx, skb, vid);
if ((mdst || BR_INPUT_SKB_CB_MROUTERS_ONLY(skb)) &&
br_multicast_querier_exists(brmctx, eth_hdr(skb), mdst)) {
@@ -190,8 +211,15 @@ int br_handle_frame_finish(struct net *n
@@ -179,8 +200,15 @@ int br_handle_frame_finish(struct net *n
}
break;
case BR_PKT_UNICAST:
@ -181,7 +181,7 @@
default:
break;
}
@@ -206,6 +234,12 @@ int br_handle_frame_finish(struct net *n
@@ -195,6 +223,12 @@ int br_handle_frame_finish(struct net *n
dst->used = now;
br_forward(dst->dst, skb, local_rcv, false);
} else {
@ -196,7 +196,7 @@
br_flood(br, skb, pkt_type, local_rcv, false);
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -92,4 +92,44 @@ struct rtmsg;
@@ -85,4 +85,44 @@ struct rtmsg;
int ipmr_get_route(struct net *net, struct sk_buff *skb,
__be32 saddr, __be32 daddr,
struct rtmsg *rtm, u32 portid);
@ -243,8 +243,8 @@
#endif
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -137,4 +137,47 @@ static inline int ip6mr_sk_ioctl(struct
return 1;
@@ -110,4 +110,47 @@ static inline int ip6mr_sk_done(struct s
return 0;
}
#endif
+

11
target/linux/qualcommax/patches-6.1/0903-arm64-dts-ipq6018-add-label-to-clocks.patch Normal file
View File

@ -0,0 +1,11 @@
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -15,7 +15,7 @@
#size-cells = <2>;
interrupt-parent = <&intc>;
- clocks {
+ clocks: clocks {
sleep_clk: sleep-clk {
compatible = "fixed-clock";
clock-frequency = <32000>;