mirror of
https://github.com/coolsnowwolf/lede.git
synced 2025-04-16 14:23:38 +00:00
sunxi: add and set 6.6 testing kernel
Allow selecting 6.6 as testing kernel on sunxi. Runtime-tested: - Linksprite pcDuino (cortexa8) - Olimex A20 Micro (cortexa7) - Pine64 SoM (cortexa53) Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
This commit is contained in:
Zoltan HERPAI
parent
75b424cc1c
commit
52a7bf68d5
@ -11,6 +11,7 @@ FEATURES:=usb ext4 display rootfs-part rtc squashfs
|
|||||||
SUBTARGETS:=cortexa8 cortexa7 cortexa53 arm926ejs
|
SUBTARGETS:=cortexa8 cortexa7 cortexa53 arm926ejs
|
||||||
|
|
||||||
KERNEL_PATCHVER:=6.1
|
KERNEL_PATCHVER:=6.1
|
||||||
|
KERNEL_TESTING_PATCHVER:=6.6
|
||||||
|
|
||||||
KERNELNAME:=zImage dtbs
|
KERNELNAME:=zImage dtbs
|
||||||
|
|
||||||
|
|||||||
@ -17,7 +17,7 @@ sunxi_setup_interfaces()
|
|||||||
lamobo,lamobo-r1)
|
lamobo,lamobo-r1)
|
||||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
|
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
|
||||||
;;
|
;;
|
||||||
olimex,a20-olinuxino-micro)
|
olimex,a13-olinuxino-micro)
|
||||||
ucidef_set_interface_lan "wlan0"
|
ucidef_set_interface_lan "wlan0"
|
||||||
;;
|
;;
|
||||||
xunlong,orangepi-r1)
|
xunlong,orangepi-r1)
|
||||||
|
|||||||
526
target/linux/sunxi/config-6.6
Normal file
526
target/linux/sunxi/config-6.6
Normal file
@ -0,0 +1,526 @@
|
|||||||
|
# CONFIG_AHCI_SUNXI is not set
|
||||||
|
CONFIG_ALIGNMENT_TRAP=y
|
||||||
|
CONFIG_ARCH_32BIT_OFF_T=y
|
||||||
|
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
|
||||||
|
CONFIG_ARCH_FORCE_MAX_ORDER=11
|
||||||
|
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||||
|
CONFIG_ARCH_KEEP_MEMBLOCK=y
|
||||||
|
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
|
||||||
|
CONFIG_ARCH_MULTIPLATFORM=y
|
||||||
|
CONFIG_ARCH_MULTI_V6_V7=y
|
||||||
|
CONFIG_ARCH_MULTI_V7=y
|
||||||
|
CONFIG_ARCH_NR_GPIO=416
|
||||||
|
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
|
||||||
|
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
|
||||||
|
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
|
||||||
|
CONFIG_ARCH_SPARSEMEM_ENABLE=y
|
||||||
|
CONFIG_ARCH_SUNXI=y
|
||||||
|
CONFIG_ARCH_SUNXI_MC_SMP=y
|
||||||
|
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||||
|
CONFIG_ARM=y
|
||||||
|
CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=y
|
||||||
|
CONFIG_ARM_APPENDED_DTB=y
|
||||||
|
CONFIG_ARM_ARCH_TIMER=y
|
||||||
|
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
|
||||||
|
CONFIG_ARM_ATAG_DTB_COMPAT=y
|
||||||
|
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
|
||||||
|
CONFIG_ARM_CCI=y
|
||||||
|
CONFIG_ARM_CCI400_COMMON=y
|
||||||
|
CONFIG_ARM_CCI400_PORT_CTRL=y
|
||||||
|
CONFIG_ARM_CPU_SUSPEND=y
|
||||||
|
CONFIG_ARM_CRYPTO=y
|
||||||
|
CONFIG_ARM_ERRATA_643719=y
|
||||||
|
CONFIG_ARM_GIC=y
|
||||||
|
CONFIG_ARM_HAS_SG_CHAIN=y
|
||||||
|
CONFIG_ARM_HEAVY_MB=y
|
||||||
|
CONFIG_ARM_L1_CACHE_SHIFT=6
|
||||||
|
CONFIG_ARM_L1_CACHE_SHIFT_6=y
|
||||||
|
CONFIG_ARM_LPAE=y
|
||||||
|
CONFIG_ARM_PATCH_IDIV=y
|
||||||
|
CONFIG_ARM_PATCH_PHYS_VIRT=y
|
||||||
|
CONFIG_ARM_PSCI=y
|
||||||
|
CONFIG_ARM_PSCI_FW=y
|
||||||
|
CONFIG_ARM_THUMB=y
|
||||||
|
CONFIG_ARM_UNWIND=y
|
||||||
|
CONFIG_ARM_VIRT_EXT=y
|
||||||
|
CONFIG_ATA=y
|
||||||
|
CONFIG_ATAGS=y
|
||||||
|
CONFIG_AUTO_ZRELADDR=y
|
||||||
|
CONFIG_AXP20X_POWER=y
|
||||||
|
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||||
|
CONFIG_BACKLIGHT_PWM=y
|
||||||
|
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
|
||||||
|
CONFIG_BLK_DEV_LOOP=y
|
||||||
|
CONFIG_BLK_DEV_SD=y
|
||||||
|
CONFIG_BLK_PM=y
|
||||||
|
CONFIG_BOUNCE=y
|
||||||
|
CONFIG_CACHE_L2X0=y
|
||||||
|
CONFIG_CAN=y
|
||||||
|
CONFIG_CLKSRC_MMIO=y
|
||||||
|
CONFIG_CLK_SUNXI=y
|
||||||
|
CONFIG_CLK_SUNXI_CLOCKS=y
|
||||||
|
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
|
||||||
|
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
|
||||||
|
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
|
||||||
|
CONFIG_CLONE_BACKWARDS=y
|
||||||
|
CONFIG_COMMON_CLK=y
|
||||||
|
CONFIG_COMPAT_32BIT_TIME=y
|
||||||
|
CONFIG_CONFIGFS_FS=y
|
||||||
|
CONFIG_CONNECTOR=y
|
||||||
|
CONFIG_CONSOLE_TRANSLATIONS=y
|
||||||
|
CONFIG_COREDUMP=y
|
||||||
|
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
|
||||||
|
CONFIG_CPUFREQ_DT=y
|
||||||
|
CONFIG_CPUFREQ_DT_PLATDEV=y
|
||||||
|
CONFIG_CPU_32v6K=y
|
||||||
|
CONFIG_CPU_32v7=y
|
||||||
|
CONFIG_CPU_ABRT_EV7=y
|
||||||
|
CONFIG_CPU_CACHE_V7=y
|
||||||
|
CONFIG_CPU_CACHE_VIPT=y
|
||||||
|
CONFIG_CPU_COPY_V6=y
|
||||||
|
CONFIG_CPU_CP15=y
|
||||||
|
CONFIG_CPU_CP15_MMU=y
|
||||||
|
CONFIG_CPU_FREQ=y
|
||||||
|
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
||||||
|
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
|
||||||
|
CONFIG_CPU_FREQ_GOV_COMMON=y
|
||||||
|
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
|
||||||
|
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
||||||
|
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
||||||
|
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
|
||||||
|
CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
||||||
|
CONFIG_CPU_FREQ_STAT=y
|
||||||
|
CONFIG_CPU_HAS_ASID=y
|
||||||
|
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||||
|
CONFIG_CPU_PABRT_V7=y
|
||||||
|
CONFIG_CPU_PM=y
|
||||||
|
CONFIG_CPU_RMAP=y
|
||||||
|
CONFIG_CPU_SPECTRE=y
|
||||||
|
CONFIG_CPU_THERMAL=y
|
||||||
|
CONFIG_CPU_THUMB_CAPABLE=y
|
||||||
|
CONFIG_CPU_TLB_V7=y
|
||||||
|
CONFIG_CPU_V7=y
|
||||||
|
CONFIG_CRC16=y
|
||||||
|
CONFIG_CRC_T10DIF=y
|
||||||
|
CONFIG_CRYPTO_CRC32=y
|
||||||
|
CONFIG_CRYPTO_CRC32C=y
|
||||||
|
CONFIG_CRYPTO_CRCT10DIF=y
|
||||||
|
CONFIG_CRYPTO_CRCT10DIF_ARM_CE=y
|
||||||
|
CONFIG_CRYPTO_DES=y
|
||||||
|
CONFIG_CRYPTO_DEV_ALLWINNER=y
|
||||||
|
CONFIG_CRYPTO_DEV_SUN4I_SS=y
|
||||||
|
# CONFIG_CRYPTO_DEV_SUN4I_SS_DEBUG is not set
|
||||||
|
CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
|
||||||
|
# CONFIG_CRYPTO_DEV_SUN8I_CE is not set
|
||||||
|
# CONFIG_CRYPTO_DEV_SUN8I_SS is not set
|
||||||
|
CONFIG_CRYPTO_HW=y
|
||||||
|
CONFIG_CRYPTO_LIB_DES=y
|
||||||
|
CONFIG_CRYPTO_MD5=y
|
||||||
|
CONFIG_CRYPTO_RNG=y
|
||||||
|
CONFIG_CRYPTO_RNG2=y
|
||||||
|
CONFIG_CRYPTO_SHA1=y
|
||||||
|
CONFIG_DCACHE_WORD_ACCESS=y
|
||||||
|
CONFIG_DEBUG_BUGVERBOSE=y
|
||||||
|
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
|
||||||
|
CONFIG_DEBUG_MEMORY_INIT=y
|
||||||
|
CONFIG_DMADEVICES=y
|
||||||
|
CONFIG_DMA_ENGINE=y
|
||||||
|
CONFIG_DMA_OF=y
|
||||||
|
CONFIG_DMA_OPS=y
|
||||||
|
CONFIG_DMA_REMAP=y
|
||||||
|
CONFIG_DMA_SUN4I=y
|
||||||
|
CONFIG_DMA_SUN6I=y
|
||||||
|
CONFIG_DMA_VIRTUAL_CHANNELS=y
|
||||||
|
CONFIG_DNOTIFY=y
|
||||||
|
CONFIG_DTC=y
|
||||||
|
CONFIG_DUMMY_CONSOLE=y
|
||||||
|
CONFIG_DVB_CORE=y
|
||||||
|
CONFIG_DWMAC_GENERIC=y
|
||||||
|
# CONFIG_DWMAC_SUN8I is not set
|
||||||
|
CONFIG_DWMAC_SUNXI=y
|
||||||
|
CONFIG_DYNAMIC_DEBUG=y
|
||||||
|
CONFIG_EDAC_ATOMIC_SCRUB=y
|
||||||
|
CONFIG_EDAC_SUPPORT=y
|
||||||
|
CONFIG_ELF_CORE=y
|
||||||
|
CONFIG_EXT4_FS=y
|
||||||
|
CONFIG_EXTCON=y
|
||||||
|
CONFIG_F2FS_FS=y
|
||||||
|
CONFIG_FAT_FS=y
|
||||||
|
CONFIG_FB=y
|
||||||
|
CONFIG_FB_CFB_COPYAREA=y
|
||||||
|
CONFIG_FB_CFB_FILLRECT=y
|
||||||
|
CONFIG_FB_CFB_IMAGEBLIT=y
|
||||||
|
CONFIG_FB_CMDLINE=y
|
||||||
|
CONFIG_FB_FOREIGN_ENDIAN=y
|
||||||
|
CONFIG_FB_LITTLE_ENDIAN=y
|
||||||
|
CONFIG_FB_MODE_HELPERS=y
|
||||||
|
CONFIG_FB_SIMPLE=y
|
||||||
|
CONFIG_FB_TILEBLITTING=y
|
||||||
|
CONFIG_FIXED_PHY=y
|
||||||
|
CONFIG_FIX_EARLYCON_MEM=y
|
||||||
|
CONFIG_FONT_8x16=y
|
||||||
|
CONFIG_FONT_8x8=y
|
||||||
|
CONFIG_FONT_SUPPORT=y
|
||||||
|
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||||
|
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
|
||||||
|
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
|
||||||
|
CONFIG_FRAME_WARN=2048
|
||||||
|
CONFIG_FREEZER=y
|
||||||
|
CONFIG_FS_IOMAP=y
|
||||||
|
CONFIG_FS_MBCACHE=y
|
||||||
|
CONFIG_FS_POSIX_ACL=y
|
||||||
|
CONFIG_FWNODE_MDIO=y
|
||||||
|
CONFIG_FW_CACHE=y
|
||||||
|
CONFIG_FW_LOADER_PAGED_BUF=y
|
||||||
|
CONFIG_GENERIC_ALLOCATOR=y
|
||||||
|
CONFIG_GENERIC_ARCH_TOPOLOGY=y
|
||||||
|
CONFIG_GENERIC_BUG=y
|
||||||
|
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||||
|
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
||||||
|
CONFIG_GENERIC_CPU_AUTOPROBE=y
|
||||||
|
CONFIG_GENERIC_CPU_VULNERABILITIES=y
|
||||||
|
CONFIG_GENERIC_EARLY_IOREMAP=y
|
||||||
|
CONFIG_GENERIC_GETTIMEOFDAY=y
|
||||||
|
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
||||||
|
CONFIG_GENERIC_IRQ_CHIP=y
|
||||||
|
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
|
||||||
|
CONFIG_GENERIC_IRQ_MIGRATION=y
|
||||||
|
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
|
||||||
|
CONFIG_GENERIC_IRQ_SHOW=y
|
||||||
|
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
||||||
|
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
|
||||||
|
CONFIG_GENERIC_PCI_IOMAP=y
|
||||||
|
CONFIG_GENERIC_PHY=y
|
||||||
|
CONFIG_GENERIC_PINCONF=y
|
||||||
|
CONFIG_GENERIC_PINCTRL_GROUPS=y
|
||||||
|
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
|
||||||
|
CONFIG_GENERIC_SCHED_CLOCK=y
|
||||||
|
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||||
|
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||||
|
CONFIG_GENERIC_STRNLEN_USER=y
|
||||||
|
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||||
|
CONFIG_GENERIC_VDSO_32=y
|
||||||
|
CONFIG_GLOB=y
|
||||||
|
CONFIG_GPIO_CDEV=y
|
||||||
|
CONFIG_HANDLE_DOMAIN_IRQ=y
|
||||||
|
CONFIG_HARDEN_BRANCH_PREDICTOR=y
|
||||||
|
CONFIG_HARDIRQS_SW_RESEND=y
|
||||||
|
CONFIG_HAS_DMA=y
|
||||||
|
CONFIG_HAS_IOMEM=y
|
||||||
|
CONFIG_HAS_IOPORT_MAP=y
|
||||||
|
CONFIG_HAVE_SMP=y
|
||||||
|
CONFIG_HIGHMEM=y
|
||||||
|
CONFIG_HIGHPTE=y
|
||||||
|
CONFIG_HOTPLUG_CPU=y
|
||||||
|
CONFIG_HWMON=y
|
||||||
|
CONFIG_HW_CONSOLE=y
|
||||||
|
CONFIG_HW_RANDOM=y
|
||||||
|
CONFIG_HW_RANDOM_TIMERIOMEM=y
|
||||||
|
CONFIG_HZ_FIXED=0
|
||||||
|
CONFIG_I2C=y
|
||||||
|
CONFIG_I2C_BOARDINFO=y
|
||||||
|
CONFIG_I2C_CHARDEV=y
|
||||||
|
CONFIG_I2C_COMPAT=y
|
||||||
|
CONFIG_I2C_HELPER_AUTO=y
|
||||||
|
CONFIG_I2C_MV64XXX=y
|
||||||
|
CONFIG_I2C_SUN6I_P2WI=y
|
||||||
|
CONFIG_IIO=y
|
||||||
|
CONFIG_INITRAMFS_SOURCE=""
|
||||||
|
CONFIG_INPUT=y
|
||||||
|
CONFIG_INPUT_AXP20X_PEK=y
|
||||||
|
CONFIG_INPUT_KEYBOARD=y
|
||||||
|
CONFIG_INPUT_MOUSEDEV=y
|
||||||
|
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
||||||
|
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||||
|
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||||
|
CONFIG_INPUT_TOUCHSCREEN=y
|
||||||
|
CONFIG_IRQCHIP=y
|
||||||
|
CONFIG_IRQ_DOMAIN=y
|
||||||
|
CONFIG_IRQ_DOMAIN_HIERARCHY=y
|
||||||
|
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
|
||||||
|
CONFIG_IRQ_FORCED_THREADING=y
|
||||||
|
CONFIG_IRQ_WORK=y
|
||||||
|
CONFIG_JBD2=y
|
||||||
|
CONFIG_KALLSYMS=y
|
||||||
|
CONFIG_KEYBOARD_SUN4I_LRADC=y
|
||||||
|
CONFIG_KMAP_LOCAL=y
|
||||||
|
CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
|
||||||
|
CONFIG_KSM=y
|
||||||
|
CONFIG_LCD_CLASS_DEVICE=y
|
||||||
|
CONFIG_LCD_PLATFORM=y
|
||||||
|
CONFIG_LEDS_GPIO=y
|
||||||
|
CONFIG_LIBFDT=y
|
||||||
|
CONFIG_LOCK_DEBUGGING_SUPPORT=y
|
||||||
|
CONFIG_LOCK_SPIN_ON_OWNER=y
|
||||||
|
CONFIG_LOGO=y
|
||||||
|
CONFIG_LOGO_LINUX_CLUT224=y
|
||||||
|
CONFIG_LOGO_LINUX_MONO=y
|
||||||
|
CONFIG_LOGO_LINUX_VGA16=y
|
||||||
|
CONFIG_MACH_SUN4I=y
|
||||||
|
CONFIG_MACH_SUN5I=y
|
||||||
|
CONFIG_MACH_SUN6I=y
|
||||||
|
CONFIG_MACH_SUN7I=y
|
||||||
|
CONFIG_MACH_SUN8I=y
|
||||||
|
CONFIG_MACH_SUN9I=y
|
||||||
|
CONFIG_MAGIC_SYSRQ=y
|
||||||
|
CONFIG_MDIO_BUS=y
|
||||||
|
CONFIG_MDIO_DEVICE=y
|
||||||
|
CONFIG_MDIO_DEVRES=y
|
||||||
|
CONFIG_MDIO_SUN4I=y
|
||||||
|
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
|
||||||
|
CONFIG_MEDIA_ATTACH=y
|
||||||
|
CONFIG_MEDIA_CAMERA_SUPPORT=y
|
||||||
|
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
|
||||||
|
CONFIG_MEDIA_PLATFORM_SUPPORT=y
|
||||||
|
CONFIG_MEDIA_RADIO_SUPPORT=y
|
||||||
|
CONFIG_MEDIA_SDR_SUPPORT=y
|
||||||
|
CONFIG_MEDIA_SUPPORT=y
|
||||||
|
CONFIG_MEDIA_TEST_SUPPORT=y
|
||||||
|
CONFIG_MEDIA_TUNER=y
|
||||||
|
CONFIG_MEMFD_CREATE=y
|
||||||
|
CONFIG_MFD_AXP20X=y
|
||||||
|
CONFIG_MFD_AXP20X_I2C=y
|
||||||
|
CONFIG_MFD_AXP20X_RSB=y
|
||||||
|
CONFIG_MFD_CORE=y
|
||||||
|
CONFIG_MFD_SUN6I_PRCM=y
|
||||||
|
CONFIG_MFD_SYSCON=y
|
||||||
|
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
|
||||||
|
CONFIG_MIGRATION=y
|
||||||
|
CONFIG_MMC=y
|
||||||
|
CONFIG_MMC_BLOCK=y
|
||||||
|
CONFIG_MMC_SUNXI=y
|
||||||
|
CONFIG_MODULES_USE_ELF_REL=y
|
||||||
|
CONFIG_MTD_JEDECPROBE=y
|
||||||
|
CONFIG_MTD_SPI_NOR=y
|
||||||
|
CONFIG_MTD_SPLIT_FIT_FW=y
|
||||||
|
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
||||||
|
CONFIG_NEED_DMA_MAP_STATE=y
|
||||||
|
CONFIG_NEON=y
|
||||||
|
CONFIG_NET_FLOW_LIMIT=y
|
||||||
|
CONFIG_NET_PTP_CLASSIFY=y
|
||||||
|
CONFIG_NET_SELFTESTS=y
|
||||||
|
CONFIG_NET_VENDOR_ALLWINNER=y
|
||||||
|
CONFIG_NLS=y
|
||||||
|
CONFIG_NLS_CODEPAGE_437=y
|
||||||
|
CONFIG_NLS_ISO8859_1=y
|
||||||
|
CONFIG_NO_HZ=y
|
||||||
|
CONFIG_NO_HZ_COMMON=y
|
||||||
|
CONFIG_NO_HZ_IDLE=y
|
||||||
|
CONFIG_NR_CPUS=8
|
||||||
|
CONFIG_NVMEM=y
|
||||||
|
CONFIG_NVMEM_SUNXI_SID=y
|
||||||
|
CONFIG_NVMEM_SYSFS=y
|
||||||
|
CONFIG_OF=y
|
||||||
|
CONFIG_OF_ADDRESS=y
|
||||||
|
CONFIG_OF_EARLY_FLATTREE=y
|
||||||
|
CONFIG_OF_FLATTREE=y
|
||||||
|
CONFIG_OF_GPIO=y
|
||||||
|
CONFIG_OF_IRQ=y
|
||||||
|
CONFIG_OF_KOBJ=y
|
||||||
|
CONFIG_OF_MDIO=y
|
||||||
|
CONFIG_OLD_SIGACTION=y
|
||||||
|
CONFIG_OLD_SIGSUSPEND3=y
|
||||||
|
CONFIG_OUTER_CACHE=y
|
||||||
|
CONFIG_OUTER_CACHE_SYNC=y
|
||||||
|
CONFIG_PADATA=y
|
||||||
|
CONFIG_PAGE_OFFSET=0xC0000000
|
||||||
|
CONFIG_PAGE_POOL=y
|
||||||
|
CONFIG_PCS_XPCS=y
|
||||||
|
CONFIG_PERF_USE_VMALLOC=y
|
||||||
|
CONFIG_PGTABLE_LEVELS=3
|
||||||
|
CONFIG_PHYLIB=y
|
||||||
|
CONFIG_PHYLINK=y
|
||||||
|
CONFIG_PHYS_ADDR_T_64BIT=y
|
||||||
|
CONFIG_PHY_SUN4I_USB=y
|
||||||
|
# CONFIG_PHY_SUN50I_USB3 is not set
|
||||||
|
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
|
||||||
|
CONFIG_PHY_SUN9I_USB=y
|
||||||
|
CONFIG_PINCTRL=y
|
||||||
|
CONFIG_PINCTRL_AXP209=y
|
||||||
|
# CONFIG_PINCTRL_SUN20I_D1 is not set
|
||||||
|
CONFIG_PINCTRL_SUN4I_A10=y
|
||||||
|
# CONFIG_PINCTRL_SUN50I_A100 is not set
|
||||||
|
# CONFIG_PINCTRL_SUN50I_A100_R is not set
|
||||||
|
# CONFIG_PINCTRL_SUN50I_A64 is not set
|
||||||
|
# CONFIG_PINCTRL_SUN50I_A64_R is not set
|
||||||
|
# CONFIG_PINCTRL_SUN50I_H5 is not set
|
||||||
|
# CONFIG_PINCTRL_SUN50I_H6 is not set
|
||||||
|
# CONFIG_PINCTRL_SUN50I_H616 is not set
|
||||||
|
# CONFIG_PINCTRL_SUN50I_H616_R is not set
|
||||||
|
# CONFIG_PINCTRL_SUN50I_H6_R is not set
|
||||||
|
CONFIG_PINCTRL_SUN5I=y
|
||||||
|
CONFIG_PINCTRL_SUN6I_A31=y
|
||||||
|
CONFIG_PINCTRL_SUN6I_A31_R=y
|
||||||
|
CONFIG_PINCTRL_SUN8I_A23=y
|
||||||
|
CONFIG_PINCTRL_SUN8I_A23_R=y
|
||||||
|
CONFIG_PINCTRL_SUN8I_A33=y
|
||||||
|
CONFIG_PINCTRL_SUN8I_A83T=y
|
||||||
|
CONFIG_PINCTRL_SUN8I_A83T_R=y
|
||||||
|
CONFIG_PINCTRL_SUN8I_H3=y
|
||||||
|
CONFIG_PINCTRL_SUN8I_H3_R=y
|
||||||
|
CONFIG_PINCTRL_SUN8I_V3S=y
|
||||||
|
CONFIG_PINCTRL_SUN9I_A80=y
|
||||||
|
CONFIG_PINCTRL_SUN9I_A80_R=y
|
||||||
|
CONFIG_PINCTRL_SUNXI=y
|
||||||
|
CONFIG_PM=y
|
||||||
|
CONFIG_PM_CLK=y
|
||||||
|
CONFIG_PM_OPP=y
|
||||||
|
CONFIG_PM_SLEEP=y
|
||||||
|
CONFIG_PM_SLEEP_SMP=y
|
||||||
|
CONFIG_POWER_RESET=y
|
||||||
|
CONFIG_POWER_SUPPLY=y
|
||||||
|
CONFIG_PPS=y
|
||||||
|
CONFIG_PRINTK_TIME=y
|
||||||
|
CONFIG_PROC_EVENTS=y
|
||||||
|
CONFIG_PROC_PAGE_MONITOR=y
|
||||||
|
CONFIG_PTP_1588_CLOCK=y
|
||||||
|
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
|
||||||
|
CONFIG_PWM=y
|
||||||
|
CONFIG_PWM_SUN4I=y
|
||||||
|
CONFIG_PWM_SYSFS=y
|
||||||
|
CONFIG_RATIONAL=y
|
||||||
|
CONFIG_REALTEK_PHY=y
|
||||||
|
CONFIG_REGMAP=y
|
||||||
|
CONFIG_REGMAP_I2C=y
|
||||||
|
CONFIG_REGMAP_IRQ=y
|
||||||
|
CONFIG_REGMAP_MMIO=y
|
||||||
|
CONFIG_REGMAP_SPI=y
|
||||||
|
CONFIG_REGULATOR=y
|
||||||
|
CONFIG_REGULATOR_AXP20X=y
|
||||||
|
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||||
|
CONFIG_REGULATOR_GPIO=y
|
||||||
|
CONFIG_REGULATOR_SY8106A=y
|
||||||
|
CONFIG_RELAY=y
|
||||||
|
CONFIG_RESET_CONTROLLER=y
|
||||||
|
CONFIG_RESET_SIMPLE=y
|
||||||
|
CONFIG_RESET_SUNXI=y
|
||||||
|
CONFIG_RFS_ACCEL=y
|
||||||
|
CONFIG_RPS=y
|
||||||
|
CONFIG_RWSEM_SPIN_ON_OWNER=y
|
||||||
|
CONFIG_SATA_HOST=y
|
||||||
|
CONFIG_SATA_PMP=y
|
||||||
|
CONFIG_SCSI=y
|
||||||
|
CONFIG_SCSI_COMMON=y
|
||||||
|
CONFIG_SDIO_UART=y
|
||||||
|
CONFIG_SECURITYFS=y
|
||||||
|
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
|
||||||
|
CONFIG_SERIAL_8250_DW=y
|
||||||
|
CONFIG_SERIAL_8250_DWLIB=y
|
||||||
|
CONFIG_SERIAL_8250_FSL=y
|
||||||
|
CONFIG_SERIAL_8250_NR_UARTS=8
|
||||||
|
CONFIG_SERIAL_8250_RUNTIME_UARTS=8
|
||||||
|
CONFIG_SERIAL_MCTRL_GPIO=y
|
||||||
|
CONFIG_SERIAL_OF_PLATFORM=y
|
||||||
|
CONFIG_SERIO=y
|
||||||
|
CONFIG_SERIO_SERPORT=y
|
||||||
|
CONFIG_SG_POOL=y
|
||||||
|
CONFIG_SMP=y
|
||||||
|
CONFIG_SMP_ON_UP=y
|
||||||
|
CONFIG_SND=y
|
||||||
|
CONFIG_SND_COMPRESS_OFFLOAD=y
|
||||||
|
CONFIG_SND_JACK=y
|
||||||
|
CONFIG_SND_JACK_INPUT_DEV=y
|
||||||
|
CONFIG_SND_PCM=y
|
||||||
|
CONFIG_SND_SIMPLE_CARD=y
|
||||||
|
CONFIG_SND_SIMPLE_CARD_UTILS=y
|
||||||
|
CONFIG_SND_SOC=y
|
||||||
|
CONFIG_SND_SOC_I2C_AND_SPI=y
|
||||||
|
# CONFIG_SND_SUN4I_I2S is not set
|
||||||
|
# CONFIG_SND_SUN4I_SPDIF is not set
|
||||||
|
# CONFIG_SND_SUN50I_DMIC is not set
|
||||||
|
# CONFIG_SND_SUN8I_CODEC is not set
|
||||||
|
# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
|
||||||
|
CONFIG_SOCK_RX_QUEUE_MAPPING=y
|
||||||
|
CONFIG_SOUND=y
|
||||||
|
CONFIG_SOUND_OSS_CORE=y
|
||||||
|
CONFIG_SPARSE_IRQ=y
|
||||||
|
CONFIG_SPI=y
|
||||||
|
CONFIG_SPI_MASTER=y
|
||||||
|
CONFIG_SPI_MEM=y
|
||||||
|
CONFIG_SPI_SUN4I=y
|
||||||
|
CONFIG_SPI_SUN6I=y
|
||||||
|
CONFIG_SRCU=y
|
||||||
|
CONFIG_STMMAC_ETH=y
|
||||||
|
CONFIG_STMMAC_PLATFORM=y
|
||||||
|
# CONFIG_SUN20I_GPADC is not set
|
||||||
|
# CONFIG_SUN20I_PPU is not set
|
||||||
|
CONFIG_SUN4I_A10_CCU=y
|
||||||
|
# CONFIG_SUN4I_EMAC is not set
|
||||||
|
CONFIG_SUN4I_TIMER=y
|
||||||
|
CONFIG_SUN5I_CCU=y
|
||||||
|
CONFIG_SUN5I_HSTIMER=y
|
||||||
|
CONFIG_SUN6I_A31_CCU=y
|
||||||
|
# CONFIG_SUN6I_RTC_CCU is not set
|
||||||
|
CONFIG_SUN8I_A23_CCU=y
|
||||||
|
CONFIG_SUN8I_A33_CCU=y
|
||||||
|
CONFIG_SUN8I_A83T_CCU=y
|
||||||
|
CONFIG_SUN8I_DE2_CCU=y
|
||||||
|
CONFIG_SUN8I_H3_CCU=y
|
||||||
|
CONFIG_SUN8I_R40_CCU=y
|
||||||
|
CONFIG_SUN8I_R_CCU=y
|
||||||
|
CONFIG_SUN8I_THERMAL=y
|
||||||
|
CONFIG_SUN8I_V3S_CCU=y
|
||||||
|
CONFIG_SUN9I_A80_CCU=y
|
||||||
|
CONFIG_SUNXI_CCU=y
|
||||||
|
CONFIG_SUNXI_MBUS=y
|
||||||
|
CONFIG_SUNXI_RSB=y
|
||||||
|
CONFIG_SUNXI_SRAM=y
|
||||||
|
CONFIG_SUNXI_WATCHDOG=y
|
||||||
|
CONFIG_SUSPEND=y
|
||||||
|
CONFIG_SUSPEND_FREEZER=y
|
||||||
|
CONFIG_SWIOTLB=y
|
||||||
|
CONFIG_SWPHY=y
|
||||||
|
CONFIG_SWP_EMULATE=y
|
||||||
|
CONFIG_SYSFS_SYSCALL=y
|
||||||
|
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||||
|
CONFIG_THERMAL=y
|
||||||
|
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
|
||||||
|
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
|
||||||
|
CONFIG_THERMAL_GOV_STEP_WISE=y
|
||||||
|
CONFIG_THERMAL_HWMON=y
|
||||||
|
CONFIG_THERMAL_OF=y
|
||||||
|
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||||
|
CONFIG_TIMER_OF=y
|
||||||
|
CONFIG_TIMER_PROBE=y
|
||||||
|
CONFIG_TMPFS_POSIX_ACL=y
|
||||||
|
CONFIG_TOUCHSCREEN_SUN4I=y
|
||||||
|
CONFIG_TREE_RCU=y
|
||||||
|
CONFIG_TREE_SRCU=y
|
||||||
|
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
|
||||||
|
CONFIG_UNWINDER_ARM=y
|
||||||
|
CONFIG_USB=y
|
||||||
|
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
||||||
|
CONFIG_USB_COMMON=y
|
||||||
|
CONFIG_USB_DWC2=y
|
||||||
|
CONFIG_USB_DWC2_HOST=y
|
||||||
|
CONFIG_USB_EHCI_HCD=y
|
||||||
|
CONFIG_USB_EHCI_HCD_PLATFORM=y
|
||||||
|
CONFIG_USB_GADGET=y
|
||||||
|
CONFIG_USB_NET_DRIVERS=y
|
||||||
|
CONFIG_USB_OHCI_HCD=y
|
||||||
|
CONFIG_USB_OHCI_HCD_PLATFORM=y
|
||||||
|
CONFIG_USB_ROLE_SWITCH=y
|
||||||
|
CONFIG_USB_STORAGE=y
|
||||||
|
CONFIG_USB_SUPPORT=y
|
||||||
|
CONFIG_USERIO=y
|
||||||
|
CONFIG_USE_OF=y
|
||||||
|
CONFIG_VFAT_FS=y
|
||||||
|
CONFIG_VFP=y
|
||||||
|
CONFIG_VFPv3=y
|
||||||
|
CONFIG_VHOST=y
|
||||||
|
CONFIG_VHOST_IOTLB=y
|
||||||
|
CONFIG_VHOST_NET=y
|
||||||
|
# CONFIG_VIDEO_SUN4I_CSI is not set
|
||||||
|
# CONFIG_VIDEO_SUN6I_CSI is not set
|
||||||
|
CONFIG_VM_EVENT_COUNTERS=y
|
||||||
|
CONFIG_VT=y
|
||||||
|
CONFIG_VT_CONSOLE=y
|
||||||
|
CONFIG_VT_CONSOLE_SLEEP=y
|
||||||
|
CONFIG_VT_HW_CONSOLE_BINDING=y
|
||||||
|
CONFIG_WATCHDOG_CORE=y
|
||||||
|
CONFIG_XPS=y
|
||||||
|
CONFIG_XXHASH=y
|
||||||
|
CONFIG_XZ_DEC_ARM=y
|
||||||
|
CONFIG_XZ_DEC_BCJ=y
|
||||||
|
CONFIG_ZBOOT_ROM_BSS=0
|
||||||
|
CONFIG_ZBOOT_ROM_TEXT=0
|
||||||
108
target/linux/sunxi/cortexa53/config-6.6
Normal file
108
target/linux/sunxi/cortexa53/config-6.6
Normal file
@ -0,0 +1,108 @@
|
|||||||
|
CONFIG_64BIT=y
|
||||||
|
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
|
||||||
|
CONFIG_ARCH_MMAP_RND_BITS=18
|
||||||
|
CONFIG_ARCH_MMAP_RND_BITS_MAX=24
|
||||||
|
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
|
||||||
|
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
|
||||||
|
CONFIG_ARCH_PROC_KCORE_TEXT=y
|
||||||
|
CONFIG_ARCH_STACKWALK=y
|
||||||
|
CONFIG_ARCH_WANTS_NO_INSTR=y
|
||||||
|
CONFIG_ARM64=y
|
||||||
|
CONFIG_ARM64_4K_PAGES=y
|
||||||
|
CONFIG_ARM64_CRYPTO=y
|
||||||
|
CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
|
||||||
|
CONFIG_ARM64_ERRATUM_2051678=y
|
||||||
|
CONFIG_ARM64_ERRATUM_2077057=y
|
||||||
|
CONFIG_ARM64_ERRATUM_2658417=y
|
||||||
|
CONFIG_ARM64_ERRATUM_2054223=y
|
||||||
|
CONFIG_ARM64_ERRATUM_2067961=y
|
||||||
|
CONFIG_ARM64_PAGE_SHIFT=12
|
||||||
|
CONFIG_ARM64_PA_BITS=48
|
||||||
|
CONFIG_ARM64_PA_BITS_48=y
|
||||||
|
CONFIG_ARM64_TAGGED_ADDR_ABI=y
|
||||||
|
CONFIG_ARM64_VA_BITS=39
|
||||||
|
CONFIG_ARM64_VA_BITS_39=y
|
||||||
|
CONFIG_ARM_AMBA=y
|
||||||
|
CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
|
||||||
|
CONFIG_ARM_GIC_V3=y
|
||||||
|
CONFIG_ARM_GIC_V3_ITS=y
|
||||||
|
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
|
||||||
|
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
|
||||||
|
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||||
|
CONFIG_CRYPTO_AES_ARM64=y
|
||||||
|
CONFIG_CRYPTO_AES_ARM64_CE=y
|
||||||
|
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
|
||||||
|
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
|
||||||
|
CONFIG_CRYPTO_BLAKE2S=y
|
||||||
|
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
|
||||||
|
CONFIG_CRYPTO_CRYPTD=y
|
||||||
|
CONFIG_CRYPTO_GHASH_ARM64_CE=y
|
||||||
|
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
|
||||||
|
CONFIG_CRYPTO_SHA1_ARM64_CE=y
|
||||||
|
CONFIG_CRYPTO_SIMD=y
|
||||||
|
CONFIG_DMA_DIRECT_REMAP=y
|
||||||
|
CONFIG_DWMAC_SUN8I=y
|
||||||
|
CONFIG_EEPROM_AT24=y
|
||||||
|
CONFIG_FRAME_POINTER=y
|
||||||
|
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
|
||||||
|
CONFIG_GENERIC_CSUM=y
|
||||||
|
CONFIG_GENERIC_FIND_FIRST_BIT=y
|
||||||
|
CONFIG_GENERIC_MSI_IRQ=y
|
||||||
|
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
|
||||||
|
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
|
||||||
|
CONFIG_MDIO_BUS_MUX=y
|
||||||
|
CONFIG_MICREL_PHY=y
|
||||||
|
CONFIG_MODULES_USE_ELF_RELA=y
|
||||||
|
CONFIG_MOTORCOMM_PHY=y
|
||||||
|
CONFIG_MUSB_PIO_ONLY=y
|
||||||
|
CONFIG_NEED_SG_DMA_LENGTH=y
|
||||||
|
CONFIG_NOP_USB_XCEIV=y
|
||||||
|
CONFIG_NO_IOPORT_MAP=y
|
||||||
|
CONFIG_PARTITION_PERCPU=y
|
||||||
|
CONFIG_PHY_SUN50I_USB3=y
|
||||||
|
CONFIG_PINCTRL_SUN50I_A100=y
|
||||||
|
CONFIG_PINCTRL_SUN50I_A100_R=y
|
||||||
|
CONFIG_PINCTRL_SUN50I_A64=y
|
||||||
|
CONFIG_PINCTRL_SUN50I_A64_R=y
|
||||||
|
CONFIG_PINCTRL_SUN50I_H5=y
|
||||||
|
CONFIG_PINCTRL_SUN50I_H6=y
|
||||||
|
CONFIG_PINCTRL_SUN50I_H6_R=y
|
||||||
|
CONFIG_PINCTRL_SUN50I_H616=y
|
||||||
|
CONFIG_PINCTRL_SUN50I_H616_R=y
|
||||||
|
# CONFIG_PREEMPT_DYNAMIC is not set
|
||||||
|
CONFIG_QUEUED_RWLOCKS=y
|
||||||
|
CONFIG_QUEUED_SPINLOCKS=y
|
||||||
|
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
|
||||||
|
# CONFIG_SCHED_CLUSTER is not set
|
||||||
|
# CONFIG_SHADOW_CALL_STACK is not set
|
||||||
|
# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
|
||||||
|
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
|
||||||
|
CONFIG_SPARSEMEM=y
|
||||||
|
CONFIG_SPARSEMEM_EXTREME=y
|
||||||
|
CONFIG_SPARSEMEM_VMEMMAP=y
|
||||||
|
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
|
||||||
|
CONFIG_SUN50I_A100_CCU=y
|
||||||
|
CONFIG_SUN50I_A100_R_CCU=y
|
||||||
|
CONFIG_SUN50I_A64_CCU=y
|
||||||
|
CONFIG_SUN50I_DE2_BUS=y
|
||||||
|
CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
|
||||||
|
CONFIG_SUN50I_H616_CCU=y
|
||||||
|
CONFIG_SUN50I_H6_CCU=y
|
||||||
|
CONFIG_SUN50I_H6_R_CCU=y
|
||||||
|
# CONFIG_SUN6I_RTC_CCU is not set
|
||||||
|
CONFIG_SYSCTL_EXCEPTION_TRACE=y
|
||||||
|
CONFIG_THREAD_INFO_IN_TASK=y
|
||||||
|
CONFIG_UNMAP_KERNEL_AT_EL0=y
|
||||||
|
CONFIG_USB_MUSB_DUAL_ROLE=y
|
||||||
|
CONFIG_USB_MUSB_HDRC=y
|
||||||
|
CONFIG_USB_MUSB_SUNXI=y
|
||||||
|
CONFIG_USB_PHY=y
|
||||||
|
CONFIG_VMAP_STACK=y
|
||||||
|
CONFIG_ZONE_DMA32=y
|
||||||
|
CONFIG_SURFACE_PLATFORMS=y
|
||||||
|
# CONFIG_CRYPTO_POLYVAL_ARM64_CE is not set
|
||||||
|
# CONFIG_CRYPTO_SM4_ARM64_CE_BLK is not set
|
||||||
|
# CONFIG_CRYPTO_SM4_ARM64_NEON_BLK is not set
|
||||||
|
# CONFIG_PAGE_TABLE_CHECK is not set
|
||||||
|
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
|
||||||
|
# CONFIG_ARCH_NXP is not set
|
||||||
28
target/linux/sunxi/cortexa7/config-6.6
Normal file
28
target/linux/sunxi/cortexa7/config-6.6
Normal file
@ -0,0 +1,28 @@
|
|||||||
|
CONFIG_B53=y
|
||||||
|
CONFIG_B53_MDIO_DRIVER=y
|
||||||
|
CONFIG_CRYPTO_BLAKE2S_ARM=y
|
||||||
|
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
|
||||||
|
CONFIG_DWMAC_SUN8I=y
|
||||||
|
CONFIG_GRO_CELLS=y
|
||||||
|
# CONFIG_HARDEN_BRANCH_HISTORY is not set
|
||||||
|
# CONFIG_HARDEN_BRANCH_PREDICTOR is not set
|
||||||
|
# CONFIG_MACH_SUN4I is not set
|
||||||
|
# CONFIG_MACH_SUN5I is not set
|
||||||
|
CONFIG_MDIO_BUS_MUX=y
|
||||||
|
CONFIG_MICREL_PHY=y
|
||||||
|
CONFIG_MUSB_PIO_ONLY=y
|
||||||
|
CONFIG_NET_DEVLINK=y
|
||||||
|
CONFIG_NET_DSA=y
|
||||||
|
CONFIG_NET_DSA_TAG_BRCM=y
|
||||||
|
CONFIG_NET_DSA_TAG_BRCM_COMMON=y
|
||||||
|
CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
|
||||||
|
CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
|
||||||
|
CONFIG_NET_SWITCHDEV=y
|
||||||
|
CONFIG_NOP_USB_XCEIV=y
|
||||||
|
CONFIG_RTC_DRV_SUN6I=y
|
||||||
|
CONFIG_SUN20I_D1_CCU=y
|
||||||
|
CONFIG_SUN20I_D1_R_CCU=y
|
||||||
|
CONFIG_USB_MUSB_DUAL_ROLE=y
|
||||||
|
CONFIG_USB_MUSB_HDRC=y
|
||||||
|
CONFIG_USB_MUSB_SUNXI=y
|
||||||
|
CONFIG_USB_PHY=y
|
||||||
12
target/linux/sunxi/cortexa8/config-6.6
Normal file
12
target/linux/sunxi/cortexa8/config-6.6
Normal file
@ -0,0 +1,12 @@
|
|||||||
|
# CONFIG_ARM_LPAE is not set
|
||||||
|
CONFIG_CRYPTO_BLAKE2S_ARM=y
|
||||||
|
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
|
||||||
|
# CONFIG_MACH_SUN6I is not set
|
||||||
|
# CONFIG_MACH_SUN7I is not set
|
||||||
|
# CONFIG_MACH_SUN8I is not set
|
||||||
|
# CONFIG_MACH_SUN9I is not set
|
||||||
|
CONFIG_PGTABLE_LEVELS=2
|
||||||
|
# CONFIG_PHY_SUN9I_USB is not set
|
||||||
|
# CONFIG_SPI_SUN6I is not set
|
||||||
|
# CONFIG_SUN8I_A83T_CCU is not set
|
||||||
|
# CONFIG_SUN8I_THERMAL is not set
|
||||||
@ -34,7 +34,9 @@ define Device/Default
|
|||||||
KERNEL := kernel-bin | uImage none
|
KERNEL := kernel-bin | uImage none
|
||||||
IMAGES := sdcard.img.gz
|
IMAGES := sdcard.img.gz
|
||||||
IMAGE/sdcard.img.gz := sunxi-sdcard | append-metadata | gzip
|
IMAGE/sdcard.img.gz := sunxi-sdcard | append-metadata | gzip
|
||||||
SUNXI_DTS_DIR :=
|
ifdef CONFIG_LINUX_6_6
|
||||||
|
SUNXI_DTS_DIR :=allwinner/
|
||||||
|
endif
|
||||||
SUNXI_DTS = $$(SUNXI_DTS_DIR)$$(SOC)-$(lastword $(subst _, ,$(1)))
|
SUNXI_DTS = $$(SUNXI_DTS_DIR)$$(SOC)-$(lastword $(subst _, ,$(1)))
|
||||||
endef
|
endef
|
||||||
|
|
||||||
|
|||||||
@ -45,7 +45,7 @@ define Device/olimex_a13-olimex-som
|
|||||||
DEVICE_PACKAGES:=kmod-rtl8192cu
|
DEVICE_PACKAGES:=kmod-rtl8192cu
|
||||||
SUPPORTED_DEVICES:=olimex,a13-olinuxino
|
SUPPORTED_DEVICES:=olimex,a13-olinuxino
|
||||||
SOC := sun5i-a13
|
SOC := sun5i-a13
|
||||||
SUNXI_DTS := sun5i-a13-olinuxino
|
SUNXI_DTS := $$(SUNXI_DTS_DIR)sun5i-a13-olinuxino
|
||||||
endef
|
endef
|
||||||
TARGET_DEVICES += olimex_a13-olimex-som
|
TARGET_DEVICES += olimex_a13-olimex-som
|
||||||
|
|
||||||
|
|||||||
@ -0,0 +1,31 @@
|
|||||||
|
From 951992797378a2177946400438f4d23c9fceae5b Mon Sep 17 00:00:00 2001
|
||||||
|
From: Martin Botka <martin.botka@somainline.org>
|
||||||
|
Date: Tue, 12 Sep 2023 14:25:13 +0200
|
||||||
|
Subject: [PATCH] arm64: dts: allwinner: h616: Add SID controller node
|
||||||
|
|
||||||
|
Add node for the H616 SID controller
|
||||||
|
|
||||||
|
Signed-off-by: Martin Botka <martin.botka@somainline.org>
|
||||||
|
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||||
|
Link: https://lore.kernel.org/r/20230912-sid-h616-v3-2-ee18e1c5bbb5@somainline.org
|
||||||
|
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||||
|
---
|
||||||
|
arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 7 +++++++
|
||||||
|
1 file changed, 7 insertions(+)
|
||||||
|
|
||||||
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
|
||||||
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
|
||||||
|
@@ -133,6 +133,13 @@
|
||||||
|
#reset-cells = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
+ sid: efuse@3006000 {
|
||||||
|
+ compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid";
|
||||||
|
+ reg = <0x03006000 0x1000>;
|
||||||
|
+ #address-cells = <1>;
|
||||||
|
+ #size-cells = <1>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
watchdog: watchdog@30090a0 {
|
||||||
|
compatible = "allwinner,sun50i-h616-wdt",
|
||||||
|
"allwinner,sun6i-a31-wdt";
|
||||||
@ -0,0 +1,98 @@
|
|||||||
|
From 898d96c5464b69af44f6407c5de81ebc349d574b Mon Sep 17 00:00:00 2001
|
||||||
|
From: Andre Przywara <andre.przywara@arm.com>
|
||||||
|
Date: Mon, 19 Feb 2024 15:36:33 +0000
|
||||||
|
Subject: [PATCH] soc: sunxi: sram: export register 0 for THS on H616
|
||||||
|
|
||||||
|
The Allwinner H616 SoC contains a mysterious bit at register offset 0x0
|
||||||
|
in the SRAM control block. If bit 16 is set (the reset value), the
|
||||||
|
temperature readings of the THS are way off, leading to reports about
|
||||||
|
200C, at normal ambient temperatures. Clearing this bits brings the
|
||||||
|
reported values down to the expected values.
|
||||||
|
The BSP code clears this bit in firmware (U-Boot), and has an explicit
|
||||||
|
comment about this, but offers no real explanation.
|
||||||
|
|
||||||
|
Experiments in U-Boot show that register 0x0 has no effect on the SRAM C
|
||||||
|
visibility: all tested bit settings still allow full read and write
|
||||||
|
access by the CPU to the whole of SRAM C. Only bit 24 of the register at
|
||||||
|
offset 0x4 makes all of SRAM C inaccessible by the CPU. So modelling
|
||||||
|
the THS switch functionality as an SRAM region would not reflect reality.
|
||||||
|
|
||||||
|
Since we should not rely on firmware settings, allow other code (the THS
|
||||||
|
driver) to access this register, by exporting it through the already
|
||||||
|
existing regmap. This mimics what we already do for the LDO control and
|
||||||
|
the EMAC register.
|
||||||
|
|
||||||
|
To avoid concurrent accesses to the same register at the same time, by
|
||||||
|
the SRAM switch code and the regmap code, use the same lock to protect
|
||||||
|
the access. The regmap subsystem allows to use an existing lock, so we
|
||||||
|
just need to hook in there.
|
||||||
|
|
||||||
|
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
||||||
|
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||||
|
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
||||||
|
Link: https://lore.kernel.org/r/20240219153639.179814-2-andre.przywara@arm.com
|
||||||
|
---
|
||||||
|
drivers/soc/sunxi/sunxi_sram.c | 22 ++++++++++++++++++++++
|
||||||
|
1 file changed, 22 insertions(+)
|
||||||
|
|
||||||
|
--- a/drivers/soc/sunxi/sunxi_sram.c
|
||||||
|
+++ b/drivers/soc/sunxi/sunxi_sram.c
|
||||||
|
@@ -287,6 +287,7 @@ EXPORT_SYMBOL(sunxi_sram_release);
|
||||||
|
struct sunxi_sramc_variant {
|
||||||
|
int num_emac_clocks;
|
||||||
|
bool has_ldo_ctrl;
|
||||||
|
+ bool has_ths_offset;
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct sunxi_sramc_variant sun4i_a10_sramc_variant = {
|
||||||
|
@@ -308,8 +309,10 @@ static const struct sunxi_sramc_variant
|
||||||
|
|
||||||
|
static const struct sunxi_sramc_variant sun50i_h616_sramc_variant = {
|
||||||
|
.num_emac_clocks = 2,
|
||||||
|
+ .has_ths_offset = true,
|
||||||
|
};
|
||||||
|
|
||||||
|
+#define SUNXI_SRAM_THS_OFFSET_REG 0x0
|
||||||
|
#define SUNXI_SRAM_EMAC_CLOCK_REG 0x30
|
||||||
|
#define SUNXI_SYS_LDO_CTRL_REG 0x150
|
||||||
|
|
||||||
|
@@ -318,6 +321,8 @@ static bool sunxi_sram_regmap_accessible
|
||||||
|
{
|
||||||
|
const struct sunxi_sramc_variant *variant = dev_get_drvdata(dev);
|
||||||
|
|
||||||
|
+ if (reg == SUNXI_SRAM_THS_OFFSET_REG && variant->has_ths_offset)
|
||||||
|
+ return true;
|
||||||
|
if (reg >= SUNXI_SRAM_EMAC_CLOCK_REG &&
|
||||||
|
reg < SUNXI_SRAM_EMAC_CLOCK_REG + variant->num_emac_clocks * 4)
|
||||||
|
return true;
|
||||||
|
@@ -327,6 +332,20 @@ static bool sunxi_sram_regmap_accessible
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
+static void sunxi_sram_lock(void *_lock)
|
||||||
|
+{
|
||||||
|
+ spinlock_t *lock = _lock;
|
||||||
|
+
|
||||||
|
+ spin_lock(lock);
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static void sunxi_sram_unlock(void *_lock)
|
||||||
|
+{
|
||||||
|
+ spinlock_t *lock = _lock;
|
||||||
|
+
|
||||||
|
+ spin_unlock(lock);
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
static struct regmap_config sunxi_sram_regmap_config = {
|
||||||
|
.reg_bits = 32,
|
||||||
|
.val_bits = 32,
|
||||||
|
@@ -336,6 +355,9 @@ static struct regmap_config sunxi_sram_r
|
||||||
|
/* other devices have no business accessing other registers */
|
||||||
|
.readable_reg = sunxi_sram_regmap_accessible_reg,
|
||||||
|
.writeable_reg = sunxi_sram_regmap_accessible_reg,
|
||||||
|
+ .lock = sunxi_sram_lock,
|
||||||
|
+ .unlock = sunxi_sram_unlock,
|
||||||
|
+ .lock_arg = &sram_lock,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init sunxi_sram_probe(struct platform_device *pdev)
|
||||||
@ -0,0 +1,47 @@
|
|||||||
|
From ebbf19e36d021f253425344b4d4b987f3b7d9be5 Mon Sep 17 00:00:00 2001
|
||||||
|
From: Maxim Kiselev <bigunclemax@gmail.com>
|
||||||
|
Date: Mon, 18 Dec 2023 00:06:23 +0300
|
||||||
|
Subject: [PATCH] thermal/drivers/sun8i: Add D1/T113s THS controller support
|
||||||
|
|
||||||
|
This patch adds a thermal sensor controller support for the D1/T113s,
|
||||||
|
which is similar to the one on H6, but with only one sensor and
|
||||||
|
different scale and offset values.
|
||||||
|
|
||||||
|
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
|
||||||
|
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||||
|
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
|
||||||
|
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
||||||
|
Link: https://lore.kernel.org/r/20231217210629.131486-3-bigunclemax@gmail.com
|
||||||
|
---
|
||||||
|
drivers/thermal/sun8i_thermal.c | 13 +++++++++++++
|
||||||
|
1 file changed, 13 insertions(+)
|
||||||
|
|
||||||
|
--- a/drivers/thermal/sun8i_thermal.c
|
||||||
|
+++ b/drivers/thermal/sun8i_thermal.c
|
||||||
|
@@ -606,6 +606,18 @@ static const struct ths_thermal_chip sun
|
||||||
|
.calc_temp = sun8i_ths_calc_temp,
|
||||||
|
};
|
||||||
|
|
||||||
|
+static const struct ths_thermal_chip sun20i_d1_ths = {
|
||||||
|
+ .sensor_num = 1,
|
||||||
|
+ .has_bus_clk_reset = true,
|
||||||
|
+ .offset = 188552,
|
||||||
|
+ .scale = 673,
|
||||||
|
+ .temp_data_base = SUN50I_H6_THS_TEMP_DATA,
|
||||||
|
+ .calibrate = sun50i_h6_ths_calibrate,
|
||||||
|
+ .init = sun50i_h6_thermal_init,
|
||||||
|
+ .irq_ack = sun50i_h6_irq_ack,
|
||||||
|
+ .calc_temp = sun8i_ths_calc_temp,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
static const struct of_device_id of_ths_match[] = {
|
||||||
|
{ .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths },
|
||||||
|
{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
|
||||||
|
@@ -614,6 +626,7 @@ static const struct of_device_id of_ths_
|
||||||
|
{ .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths },
|
||||||
|
{ .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
|
||||||
|
{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
|
||||||
|
+ { .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths },
|
||||||
|
{ /* sentinel */ },
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(of, of_ths_match);
|
||||||
@ -0,0 +1,79 @@
|
|||||||
|
From 14f118aa50fe7c7c7330f56d007ecacca487cea8 Mon Sep 17 00:00:00 2001
|
||||||
|
From: Andre Przywara <andre.przywara@arm.com>
|
||||||
|
Date: Mon, 19 Feb 2024 15:36:35 +0000
|
||||||
|
Subject: [PATCH] thermal/drivers/sun8i: Explain unknown H6 register value
|
||||||
|
|
||||||
|
So far we were ORing in some "unknown" value into the THS control
|
||||||
|
register on the Allwinner H6. This part of the register is not explained
|
||||||
|
in the H6 manual, but the H616 manual details those bits, and on closer
|
||||||
|
inspection the THS IP blocks in both SoCs seem very close:
|
||||||
|
- The BSP code for both SoCs writes the same values into THS_CTRL.
|
||||||
|
- The reset values of at least the first three registers are the same.
|
||||||
|
|
||||||
|
Replace the "unknown" value with its proper meaning: "acquire time",
|
||||||
|
most probably the sample part of the sample & hold circuit of the ADC,
|
||||||
|
according to its explanation in the H616 manual.
|
||||||
|
|
||||||
|
No functional change, just a macro rename and adjustment.
|
||||||
|
|
||||||
|
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
||||||
|
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||||
|
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
|
||||||
|
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
||||||
|
Link: https://lore.kernel.org/r/20240219153639.179814-4-andre.przywara@arm.com
|
||||||
|
---
|
||||||
|
drivers/thermal/sun8i_thermal.c | 29 ++++++++++++++++-------------
|
||||||
|
1 file changed, 16 insertions(+), 13 deletions(-)
|
||||||
|
|
||||||
|
--- a/drivers/thermal/sun8i_thermal.c
|
||||||
|
+++ b/drivers/thermal/sun8i_thermal.c
|
||||||
|
@@ -50,7 +50,8 @@
|
||||||
|
#define SUN8I_THS_CTRL2_T_ACQ1(x) ((GENMASK(15, 0) & (x)) << 16)
|
||||||
|
#define SUN8I_THS_DATA_IRQ_STS(x) BIT(x + 8)
|
||||||
|
|
||||||
|
-#define SUN50I_THS_CTRL0_T_ACQ(x) ((GENMASK(15, 0) & (x)) << 16)
|
||||||
|
+#define SUN50I_THS_CTRL0_T_ACQ(x) (GENMASK(15, 0) & ((x) - 1))
|
||||||
|
+#define SUN50I_THS_CTRL0_T_SAMPLE_PER(x) ((GENMASK(15, 0) & ((x) - 1)) << 16)
|
||||||
|
#define SUN50I_THS_FILTER_EN BIT(2)
|
||||||
|
#define SUN50I_THS_FILTER_TYPE(x) (GENMASK(1, 0) & (x))
|
||||||
|
#define SUN50I_H6_THS_PC_TEMP_PERIOD(x) ((GENMASK(19, 0) & (x)) << 12)
|
||||||
|
@@ -410,25 +411,27 @@ static int sun8i_h3_thermal_init(struct
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
-/*
|
||||||
|
- * Without this undocumented value, the returned temperatures would
|
||||||
|
- * be higher than real ones by about 20C.
|
||||||
|
- */
|
||||||
|
-#define SUN50I_H6_CTRL0_UNK 0x0000002f
|
||||||
|
-
|
||||||
|
static int sun50i_h6_thermal_init(struct ths_device *tmdev)
|
||||||
|
{
|
||||||
|
int val;
|
||||||
|
|
||||||
|
/*
|
||||||
|
- * T_acq = 20us
|
||||||
|
- * clkin = 24MHz
|
||||||
|
- *
|
||||||
|
- * x = T_acq * clkin - 1
|
||||||
|
- * = 479
|
||||||
|
+ * The manual recommends an overall sample frequency of 50 KHz (20us,
|
||||||
|
+ * 480 cycles at 24 MHz), which provides plenty of time for both the
|
||||||
|
+ * acquisition time (>24 cycles) and the actual conversion time
|
||||||
|
+ * (>14 cycles).
|
||||||
|
+ * The lower half of the CTRL register holds the "acquire time", in
|
||||||
|
+ * clock cycles, which the manual recommends to be 2us:
|
||||||
|
+ * 24MHz * 2us = 48 cycles.
|
||||||
|
+ * The high half of THS_CTRL encodes the sample frequency, in clock
|
||||||
|
+ * cycles: 24MHz * 20us = 480 cycles.
|
||||||
|
+ * This is explained in the H616 manual, but apparently wrongly
|
||||||
|
+ * described in the H6 manual, although the BSP code does the same
|
||||||
|
+ * for both SoCs.
|
||||||
|
*/
|
||||||
|
regmap_write(tmdev->regmap, SUN50I_THS_CTRL0,
|
||||||
|
- SUN50I_H6_CTRL0_UNK | SUN50I_THS_CTRL0_T_ACQ(479));
|
||||||
|
+ SUN50I_THS_CTRL0_T_ACQ(48) |
|
||||||
|
+ SUN50I_THS_CTRL0_T_SAMPLE_PER(480));
|
||||||
|
/* average over 4 samples */
|
||||||
|
regmap_write(tmdev->regmap, SUN50I_H6_THS_MFC,
|
||||||
|
SUN50I_THS_FILTER_EN |
|
||||||
@ -0,0 +1,74 @@
|
|||||||
|
From 6c04a419a4c5fb18edefc44dd676fb95c7f6c55d Mon Sep 17 00:00:00 2001
|
||||||
|
From: Maksim Kiselev <bigunclemax@gmail.com>
|
||||||
|
Date: Mon, 19 Feb 2024 15:36:36 +0000
|
||||||
|
Subject: [PATCH] thermal/drivers/sun8i: Extend H6 calibration to support 4
|
||||||
|
sensors
|
||||||
|
|
||||||
|
The H616 SoC resembles the H6 thermal sensor controller, with a few
|
||||||
|
changes like four sensors.
|
||||||
|
|
||||||
|
Extend sun50i_h6_ths_calibrate() function to support calibration of
|
||||||
|
these sensors.
|
||||||
|
|
||||||
|
Co-developed-by: Martin Botka <martin.botka@somainline.org>
|
||||||
|
Signed-off-by: Martin Botka <martin.botka@somainline.org>
|
||||||
|
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
|
||||||
|
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
|
||||||
|
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
||||||
|
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||||
|
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
|
||||||
|
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
||||||
|
Link: https://lore.kernel.org/r/20240219153639.179814-5-andre.przywara@arm.com
|
||||||
|
---
|
||||||
|
drivers/thermal/sun8i_thermal.c | 28 ++++++++++++++++++++--------
|
||||||
|
1 file changed, 20 insertions(+), 8 deletions(-)
|
||||||
|
|
||||||
|
--- a/drivers/thermal/sun8i_thermal.c
|
||||||
|
+++ b/drivers/thermal/sun8i_thermal.c
|
||||||
|
@@ -222,16 +222,21 @@ static int sun50i_h6_ths_calibrate(struc
|
||||||
|
struct device *dev = tmdev->dev;
|
||||||
|
int i, ft_temp;
|
||||||
|
|
||||||
|
- if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
|
||||||
|
+ if (!caldata[0])
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* efuse layout:
|
||||||
|
*
|
||||||
|
- * 0 11 16 32
|
||||||
|
- * +-------+-------+-------+
|
||||||
|
- * |temp| |sensor0|sensor1|
|
||||||
|
- * +-------+-------+-------+
|
||||||
|
+ * 0 11 16 27 32 43 48 57
|
||||||
|
+ * +----------+-----------+-----------+-----------+
|
||||||
|
+ * | temp | |sensor0| |sensor1| |sensor2| |
|
||||||
|
+ * +----------+-----------+-----------+-----------+
|
||||||
|
+ * ^ ^ ^
|
||||||
|
+ * | | |
|
||||||
|
+ * | | sensor3[11:8]
|
||||||
|
+ * | sensor3[7:4]
|
||||||
|
+ * sensor3[3:0]
|
||||||
|
*
|
||||||
|
* The calibration data on the H6 is the ambient temperature and
|
||||||
|
* sensor values that are filled during the factory test stage.
|
||||||
|
@@ -244,9 +249,16 @@ static int sun50i_h6_ths_calibrate(struc
|
||||||
|
ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;
|
||||||
|
|
||||||
|
for (i = 0; i < tmdev->chip->sensor_num; i++) {
|
||||||
|
- int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
|
||||||
|
- int cdata, offset;
|
||||||
|
- int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
|
||||||
|
+ int sensor_reg, sensor_temp, cdata, offset;
|
||||||
|
+
|
||||||
|
+ if (i == 3)
|
||||||
|
+ sensor_reg = (caldata[1] >> 12)
|
||||||
|
+ | ((caldata[2] >> 12) << 4)
|
||||||
|
+ | ((caldata[3] >> 12) << 8);
|
||||||
|
+ else
|
||||||
|
+ sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
|
||||||
|
+
|
||||||
|
+ sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Calibration data is CALIBRATE_DEFAULT - (calculated
|
||||||
@ -0,0 +1,126 @@
|
|||||||
|
From f8b54d1120b81ed57bed96cc8e814ba08886d1e5 Mon Sep 17 00:00:00 2001
|
||||||
|
From: Andre Przywara <andre.przywara@arm.com>
|
||||||
|
Date: Mon, 19 Feb 2024 15:36:37 +0000
|
||||||
|
Subject: [PATCH] thermal/drivers/sun8i: Add SRAM register access code
|
||||||
|
|
||||||
|
The Allwinner H616 SoC needs to clear a bit in one register in the SRAM
|
||||||
|
controller, to report reasonable temperature values. On reset, bit 16 in
|
||||||
|
register 0x3000000 is set, which leads to the driver reporting
|
||||||
|
temperatures around 200C. Clearing this bit brings the values down to the
|
||||||
|
expected range. The BSP code does a one-time write in U-Boot, with a
|
||||||
|
comment just mentioning the effect on the THS, but offering no further
|
||||||
|
explanation.
|
||||||
|
|
||||||
|
To not rely on firmware to set things up for us, add code that queries
|
||||||
|
the SRAM controller device via a DT phandle link, then clear just this
|
||||||
|
single bit.
|
||||||
|
|
||||||
|
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
||||||
|
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
|
||||||
|
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
||||||
|
Link: https://lore.kernel.org/r/20240219153639.179814-6-andre.przywara@arm.com
|
||||||
|
---
|
||||||
|
drivers/thermal/sun8i_thermal.c | 51 +++++++++++++++++++++++++++++++++
|
||||||
|
1 file changed, 51 insertions(+)
|
||||||
|
|
||||||
|
--- a/drivers/thermal/sun8i_thermal.c
|
||||||
|
+++ b/drivers/thermal/sun8i_thermal.c
|
||||||
|
@@ -15,6 +15,7 @@
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/nvmem-consumer.h>
|
||||||
|
#include <linux/of.h>
|
||||||
|
+#include <linux/of_platform.h>
|
||||||
|
#include <linux/platform_device.h>
|
||||||
|
#include <linux/regmap.h>
|
||||||
|
#include <linux/reset.h>
|
||||||
|
@@ -66,6 +67,7 @@ struct tsensor {
|
||||||
|
struct ths_thermal_chip {
|
||||||
|
bool has_mod_clk;
|
||||||
|
bool has_bus_clk_reset;
|
||||||
|
+ bool needs_sram;
|
||||||
|
int sensor_num;
|
||||||
|
int offset;
|
||||||
|
int scale;
|
||||||
|
@@ -83,12 +85,16 @@ struct ths_device {
|
||||||
|
const struct ths_thermal_chip *chip;
|
||||||
|
struct device *dev;
|
||||||
|
struct regmap *regmap;
|
||||||
|
+ struct regmap_field *sram_regmap_field;
|
||||||
|
struct reset_control *reset;
|
||||||
|
struct clk *bus_clk;
|
||||||
|
struct clk *mod_clk;
|
||||||
|
struct tsensor sensor[MAX_SENSOR_NUM];
|
||||||
|
};
|
||||||
|
|
||||||
|
+/* The H616 needs to have a bit 16 in the SRAM control register cleared. */
|
||||||
|
+static const struct reg_field sun8i_ths_sram_reg_field = REG_FIELD(0x0, 16, 16);
|
||||||
|
+
|
||||||
|
/* Temp Unit: millidegree Celsius */
|
||||||
|
static int sun8i_ths_calc_temp(struct ths_device *tmdev,
|
||||||
|
int id, int reg)
|
||||||
|
@@ -337,6 +343,34 @@ static void sun8i_ths_reset_control_asse
|
||||||
|
reset_control_assert(data);
|
||||||
|
}
|
||||||
|
|
||||||
|
+static struct regmap *sun8i_ths_get_sram_regmap(struct device_node *node)
|
||||||
|
+{
|
||||||
|
+ struct device_node *sram_node;
|
||||||
|
+ struct platform_device *sram_pdev;
|
||||||
|
+ struct regmap *regmap = NULL;
|
||||||
|
+
|
||||||
|
+ sram_node = of_parse_phandle(node, "allwinner,sram", 0);
|
||||||
|
+ if (!sram_node)
|
||||||
|
+ return ERR_PTR(-ENODEV);
|
||||||
|
+
|
||||||
|
+ sram_pdev = of_find_device_by_node(sram_node);
|
||||||
|
+ if (!sram_pdev) {
|
||||||
|
+ /* platform device might not be probed yet */
|
||||||
|
+ regmap = ERR_PTR(-EPROBE_DEFER);
|
||||||
|
+ goto out_put_node;
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ /* If no regmap is found then the other device driver is at fault */
|
||||||
|
+ regmap = dev_get_regmap(&sram_pdev->dev, NULL);
|
||||||
|
+ if (!regmap)
|
||||||
|
+ regmap = ERR_PTR(-EINVAL);
|
||||||
|
+
|
||||||
|
+ platform_device_put(sram_pdev);
|
||||||
|
+out_put_node:
|
||||||
|
+ of_node_put(sram_node);
|
||||||
|
+ return regmap;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
static int sun8i_ths_resource_init(struct ths_device *tmdev)
|
||||||
|
{
|
||||||
|
struct device *dev = tmdev->dev;
|
||||||
|
@@ -381,6 +415,19 @@ static int sun8i_ths_resource_init(struc
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
+ if (tmdev->chip->needs_sram) {
|
||||||
|
+ struct regmap *regmap;
|
||||||
|
+
|
||||||
|
+ regmap = sun8i_ths_get_sram_regmap(dev->of_node);
|
||||||
|
+ if (IS_ERR(regmap))
|
||||||
|
+ return PTR_ERR(regmap);
|
||||||
|
+ tmdev->sram_regmap_field = devm_regmap_field_alloc(dev,
|
||||||
|
+ regmap,
|
||||||
|
+ sun8i_ths_sram_reg_field);
|
||||||
|
+ if (IS_ERR(tmdev->sram_regmap_field))
|
||||||
|
+ return PTR_ERR(tmdev->sram_regmap_field);
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
ret = sun8i_ths_calibrate(tmdev);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
@@ -427,6 +474,10 @@ static int sun50i_h6_thermal_init(struct
|
||||||
|
{
|
||||||
|
int val;
|
||||||
|
|
||||||
|
+ /* The H616 needs to have a bit in the SRAM control register cleared. */
|
||||||
|
+ if (tmdev->sram_regmap_field)
|
||||||
|
+ regmap_field_write(tmdev->sram_regmap_field, 0);
|
||||||
|
+
|
||||||
|
/*
|
||||||
|
* The manual recommends an overall sample frequency of 50 KHz (20us,
|
||||||
|
* 480 cycles at 24 MHz), which provides plenty of time for both the
|
||||||
@ -0,0 +1,50 @@
|
|||||||
|
From e7dbfa19572a1440a2e67ef70f94ff204849a0a8 Mon Sep 17 00:00:00 2001
|
||||||
|
From: Martin Botka <martin.botka@somainline.org>
|
||||||
|
Date: Mon, 19 Feb 2024 15:36:38 +0000
|
||||||
|
Subject: [PATCH] thermal/drivers/sun8i: Add support for H616 THS controller
|
||||||
|
|
||||||
|
Add support for the thermal sensor found in H616 SoCs, is the same as
|
||||||
|
the H6 thermal sensor controller, but with four sensors.
|
||||||
|
Also the registers readings are wrong, unless a bit in the first SYS_CFG
|
||||||
|
register cleared, so set exercise the SRAM regmap to take care of that.
|
||||||
|
|
||||||
|
Signed-off-by: Martin Botka <martin.botka@somainline.org>
|
||||||
|
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
||||||
|
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
|
||||||
|
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
||||||
|
Link: https://lore.kernel.org/r/20240219153639.179814-7-andre.przywara@arm.com
|
||||||
|
---
|
||||||
|
drivers/thermal/sun8i_thermal.c | 15 +++++++++++++++
|
||||||
|
1 file changed, 15 insertions(+)
|
||||||
|
|
||||||
|
--- a/drivers/thermal/sun8i_thermal.c
|
||||||
|
+++ b/drivers/thermal/sun8i_thermal.c
|
||||||
|
@@ -684,6 +684,20 @@ static const struct ths_thermal_chip sun
|
||||||
|
.calc_temp = sun8i_ths_calc_temp,
|
||||||
|
};
|
||||||
|
|
||||||
|
+static const struct ths_thermal_chip sun50i_h616_ths = {
|
||||||
|
+ .sensor_num = 4,
|
||||||
|
+ .has_bus_clk_reset = true,
|
||||||
|
+ .needs_sram = true,
|
||||||
|
+ .ft_deviation = 8000,
|
||||||
|
+ .offset = 263655,
|
||||||
|
+ .scale = 810,
|
||||||
|
+ .temp_data_base = SUN50I_H6_THS_TEMP_DATA,
|
||||||
|
+ .calibrate = sun50i_h6_ths_calibrate,
|
||||||
|
+ .init = sun50i_h6_thermal_init,
|
||||||
|
+ .irq_ack = sun50i_h6_irq_ack,
|
||||||
|
+ .calc_temp = sun8i_ths_calc_temp,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
static const struct of_device_id of_ths_match[] = {
|
||||||
|
{ .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths },
|
||||||
|
{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
|
||||||
|
@@ -693,6 +707,7 @@ static const struct of_device_id of_ths_
|
||||||
|
{ .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
|
||||||
|
{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
|
||||||
|
{ .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths },
|
||||||
|
+ { .compatible = "allwinner,sun50i-h616-ths", .data = &sun50i_h616_ths },
|
||||||
|
{ /* sentinel */ },
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(of, of_ths_match);
|
||||||
@ -0,0 +1,68 @@
|
|||||||
|
From 9ac53d5532cc4bb595bbee86ccba2172ccc336c3 Mon Sep 17 00:00:00 2001
|
||||||
|
From: Mark Brown <broonie@kernel.org>
|
||||||
|
Date: Tue, 23 Jan 2024 23:33:07 +0000
|
||||||
|
Subject: [PATCH] thermal/drivers/sun8i: Don't fail probe due to zone
|
||||||
|
registration failure
|
||||||
|
|
||||||
|
Currently the sun8i thermal driver will fail to probe if any of the
|
||||||
|
thermal zones it is registering fails to register with the thermal core.
|
||||||
|
Since we currently do not define any trip points for the GPU thermal
|
||||||
|
zones on at least A64 or H5 this means that we have no thermal support
|
||||||
|
on these platforms:
|
||||||
|
|
||||||
|
[ 1.698703] thermal_sys: Failed to find 'trips' node
|
||||||
|
[ 1.698707] thermal_sys: Failed to find trip points for thermal-sensor id=1
|
||||||
|
|
||||||
|
even though the main CPU thermal zone on both SoCs is fully configured.
|
||||||
|
This does not seem ideal, while we may not be able to use all the zones
|
||||||
|
it seems better to have those zones which are usable be operational.
|
||||||
|
Instead just carry on registering zones if we get any non-deferral
|
||||||
|
error, allowing use of those zones which are usable.
|
||||||
|
|
||||||
|
This means that we also need to update the interrupt handler to not
|
||||||
|
attempt to notify the core for events on zones which we have not
|
||||||
|
registered, I didn't see an ability to mask individual interrupts and
|
||||||
|
I would expect that interrupts would still be indicated in the ISR even
|
||||||
|
if they were masked.
|
||||||
|
|
||||||
|
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
|
||||||
|
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||||
|
Signed-off-by: Mark Brown <broonie@kernel.org>
|
||||||
|
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
||||||
|
Link: https://lore.kernel.org/r/20240123-thermal-sun8i-registration-v3-1-3e5771b1bbdd@kernel.org
|
||||||
|
---
|
||||||
|
drivers/thermal/sun8i_thermal.c | 16 ++++++++++++++--
|
||||||
|
1 file changed, 14 insertions(+), 2 deletions(-)
|
||||||
|
|
||||||
|
--- a/drivers/thermal/sun8i_thermal.c
|
||||||
|
+++ b/drivers/thermal/sun8i_thermal.c
|
||||||
|
@@ -195,6 +195,9 @@ static irqreturn_t sun8i_irq_thread(int
|
||||||
|
int i;
|
||||||
|
|
||||||
|
for_each_set_bit(i, &irq_bitmap, tmdev->chip->sensor_num) {
|
||||||
|
+ /* We allow some zones to not register. */
|
||||||
|
+ if (IS_ERR(tmdev->sensor[i].tzd))
|
||||||
|
+ continue;
|
||||||
|
thermal_zone_device_update(tmdev->sensor[i].tzd,
|
||||||
|
THERMAL_EVENT_UNSPECIFIED);
|
||||||
|
}
|
||||||
|
@@ -531,8 +534,17 @@ static int sun8i_ths_register(struct ths
|
||||||
|
i,
|
||||||
|
&tmdev->sensor[i],
|
||||||
|
&ths_ops);
|
||||||
|
- if (IS_ERR(tmdev->sensor[i].tzd))
|
||||||
|
- return PTR_ERR(tmdev->sensor[i].tzd);
|
||||||
|
+
|
||||||
|
+ /*
|
||||||
|
+ * If an individual zone fails to register for reasons
|
||||||
|
+ * other than probe deferral (eg, a bad DT) then carry
|
||||||
|
+ * on, other zones might register successfully.
|
||||||
|
+ */
|
||||||
|
+ if (IS_ERR(tmdev->sensor[i].tzd)) {
|
||||||
|
+ if (PTR_ERR(tmdev->sensor[i].tzd) == -EPROBE_DEFER)
|
||||||
|
+ return PTR_ERR(tmdev->sensor[i].tzd);
|
||||||
|
+ continue;
|
||||||
|
+ }
|
||||||
|
|
||||||
|
devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd);
|
||||||
|
}
|
||||||
@ -0,0 +1,138 @@
|
|||||||
|
From f4318af40544b8e7ff5a6b667ede60e6cf808262 Mon Sep 17 00:00:00 2001
|
||||||
|
From: Martin Botka <martin.botka@somainline.org>
|
||||||
|
Date: Mon, 19 Feb 2024 15:36:39 +0000
|
||||||
|
Subject: [PATCH] arm64: dts: allwinner: h616: Add thermal sensor and zones
|
||||||
|
|
||||||
|
There are four thermal sensors:
|
||||||
|
- CPU
|
||||||
|
- GPU
|
||||||
|
- VE
|
||||||
|
- DRAM
|
||||||
|
|
||||||
|
Add the thermal sensor configuration and the thermal zones.
|
||||||
|
|
||||||
|
Signed-off-by: Martin Botka <martin.botka@somainline.org>
|
||||||
|
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
||||||
|
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||||
|
Link: https://lore.kernel.org/r/20240219153639.179814-8-andre.przywara@arm.com
|
||||||
|
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||||
|
---
|
||||||
|
.../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 88 +++++++++++++++++++
|
||||||
|
1 file changed, 88 insertions(+)
|
||||||
|
|
||||||
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
|
||||||
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
|
||||||
|
@@ -9,6 +9,7 @@
|
||||||
|
#include <dt-bindings/clock/sun6i-rtc.h>
|
||||||
|
#include <dt-bindings/reset/sun50i-h616-ccu.h>
|
||||||
|
#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
|
||||||
|
+#include <dt-bindings/thermal/thermal.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
interrupt-parent = <&gic>;
|
||||||
|
@@ -138,6 +139,10 @@
|
||||||
|
reg = <0x03006000 0x1000>;
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
+
|
||||||
|
+ ths_calibration: thermal-sensor-calibration@14 {
|
||||||
|
+ reg = <0x14 0x8>;
|
||||||
|
+ };
|
||||||
|
};
|
||||||
|
|
||||||
|
watchdog: watchdog@30090a0 {
|
||||||
|
@@ -511,6 +516,19 @@
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
+ ths: thermal-sensor@5070400 {
|
||||||
|
+ compatible = "allwinner,sun50i-h616-ths";
|
||||||
|
+ reg = <0x05070400 0x400>;
|
||||||
|
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
+ clocks = <&ccu CLK_BUS_THS>;
|
||||||
|
+ clock-names = "bus";
|
||||||
|
+ resets = <&ccu RST_BUS_THS>;
|
||||||
|
+ nvmem-cells = <&ths_calibration>;
|
||||||
|
+ nvmem-cell-names = "calibration";
|
||||||
|
+ allwinner,sram = <&syscon>;
|
||||||
|
+ #thermal-sensor-cells = <1>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
usbotg: usb@5100000 {
|
||||||
|
compatible = "allwinner,sun50i-h616-musb",
|
||||||
|
"allwinner,sun8i-h3-musb";
|
||||||
|
@@ -755,4 +773,74 @@
|
||||||
|
#size-cells = <0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
+
|
||||||
|
+ thermal-zones {
|
||||||
|
+ cpu-thermal {
|
||||||
|
+ polling-delay-passive = <500>;
|
||||||
|
+ polling-delay = <1000>;
|
||||||
|
+ thermal-sensors = <&ths 2>;
|
||||||
|
+ sustainable-power = <1000>;
|
||||||
|
+
|
||||||
|
+ trips {
|
||||||
|
+ cpu_threshold: cpu-trip-0 {
|
||||||
|
+ temperature = <60000>;
|
||||||
|
+ type = "passive";
|
||||||
|
+ hysteresis = <0>;
|
||||||
|
+ };
|
||||||
|
+ cpu_target: cpu-trip-1 {
|
||||||
|
+ temperature = <70000>;
|
||||||
|
+ type = "passive";
|
||||||
|
+ hysteresis = <0>;
|
||||||
|
+ };
|
||||||
|
+ cpu_critical: cpu-trip-2 {
|
||||||
|
+ temperature = <110000>;
|
||||||
|
+ type = "critical";
|
||||||
|
+ hysteresis = <0>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ gpu-thermal {
|
||||||
|
+ polling-delay-passive = <500>;
|
||||||
|
+ polling-delay = <1000>;
|
||||||
|
+ thermal-sensors = <&ths 0>;
|
||||||
|
+ sustainable-power = <1100>;
|
||||||
|
+
|
||||||
|
+ trips {
|
||||||
|
+ gpu_temp_critical: gpu-trip-0 {
|
||||||
|
+ temperature = <110000>;
|
||||||
|
+ type = "critical";
|
||||||
|
+ hysteresis = <0>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ ve-thermal {
|
||||||
|
+ polling-delay-passive = <0>;
|
||||||
|
+ polling-delay = <0>;
|
||||||
|
+ thermal-sensors = <&ths 1>;
|
||||||
|
+
|
||||||
|
+ trips {
|
||||||
|
+ ve_temp_critical: ve-trip-0 {
|
||||||
|
+ temperature = <110000>;
|
||||||
|
+ type = "critical";
|
||||||
|
+ hysteresis = <0>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ ddr-thermal {
|
||||||
|
+ polling-delay-passive = <0>;
|
||||||
|
+ polling-delay = <0>;
|
||||||
|
+ thermal-sensors = <&ths 3>;
|
||||||
|
+
|
||||||
|
+ trips {
|
||||||
|
+ ddr_temp_critical: ddr-trip-0 {
|
||||||
|
+ temperature = <110000>;
|
||||||
|
+ type = "critical";
|
||||||
|
+ hysteresis = <0>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
};
|
||||||
@ -0,0 +1,16 @@
|
|||||||
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
|
||||||
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
|
||||||
|
@@ -116,6 +116,13 @@
|
||||||
|
|
||||||
|
&ehci1 {
|
||||||
|
status = "okay";
|
||||||
|
+
|
||||||
|
+ usb-eth@1 {
|
||||||
|
+ compatible = "realtek,rtl8153";
|
||||||
|
+ reg = <1>;
|
||||||
|
+
|
||||||
|
+ realtek,led-data = <0x78>;
|
||||||
|
+ };
|
||||||
|
};
|
||||||
|
|
||||||
|
&ehci2 {
|
||||||
@ -0,0 +1,20 @@
|
|||||||
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
|
||||||
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
|
||||||
|
@@ -60,7 +60,7 @@
|
||||||
|
|
||||||
|
key-sw4 {
|
||||||
|
label = "sw4";
|
||||||
|
- linux,code = <BTN_0>;
|
||||||
|
+ linux,code = <KEY_POWER>;
|
||||||
|
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
|
||||||
|
wakeup-source;
|
||||||
|
};
|
||||||
|
@@ -221,7 +221,7 @@
|
||||||
|
};
|
||||||
|
|
||||||
|
&usb_otg {
|
||||||
|
- dr_mode = "otg";
|
||||||
|
+ dr_mode = "host";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
@ -0,0 +1,46 @@
|
|||||||
|
From 7d87d3dafc4b1ea5659eb71ee6c5fd5308490d1f Mon Sep 17 00:00:00 2001
|
||||||
|
From: Oskari Lemmela <oskari@lemmela.net>
|
||||||
|
Date: Mon, 31 Dec 2018 07:44:49 +0200
|
||||||
|
Subject: [PATCH] arm64: allwinner: a64-sopine: Add Sopine flash partitions.
|
||||||
|
|
||||||
|
First 896kB to u-boot. Enough space for SPL, u-boot and ATF.
|
||||||
|
Next 128kB to u-boot environment and rest to firmware.
|
||||||
|
|
||||||
|
Firmware partition is compatible FIT image dynamic splitting.
|
||||||
|
|
||||||
|
Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
|
||||||
|
---
|
||||||
|
.../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 22 +++++++++++++++++++
|
||||||
|
1 file changed, 22 insertions(+)
|
||||||
|
|
||||||
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
|
||||||
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
|
||||||
|
@@ -58,6 +58,28 @@
|
||||||
|
compatible = "jedec,spi-nor";
|
||||||
|
reg = <0>;
|
||||||
|
spi-max-frequency = <40000000>;
|
||||||
|
+
|
||||||
|
+ partitions {
|
||||||
|
+ compatible = "fixed-partitions";
|
||||||
|
+ #address-cells = <1>;
|
||||||
|
+ #size-cells = <1>;
|
||||||
|
+
|
||||||
|
+ partition@0 {
|
||||||
|
+ label = "u-boot";
|
||||||
|
+ reg = <0x000000 0x0E0000>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ partition@e0000 {
|
||||||
|
+ label = "u-boot-env";
|
||||||
|
+ reg = <0x0E0000 0x020000>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ partition@100000 {
|
||||||
|
+ compatible = "denx,fit";
|
||||||
|
+ label = "firmware";
|
||||||
|
+ reg = <0x100000 0xF00000>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
@ -0,0 +1,292 @@
|
|||||||
|
--- a/arch/arm/boot/dts/allwinner/Makefile
|
||||||
|
+++ b/arch/arm/boot/dts/allwinner/Makefile
|
||||||
|
@@ -280,6 +280,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
|
||||||
|
sun8i-a83t-cubietruck-plus.dtb \
|
||||||
|
sun8i-a83t-tbs-a711.dtb \
|
||||||
|
sun8i-h2-plus-bananapi-m2-zero.dtb \
|
||||||
|
+ sun8i-h2-plus-bananapi-p2-zero.dtb \
|
||||||
|
sun8i-h2-plus-libretech-all-h3-cc.dtb \
|
||||||
|
sun8i-h2-plus-orangepi-r1.dtb \
|
||||||
|
sun8i-h2-plus-orangepi-zero.dtb \
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-p2-zero.dts
|
||||||
|
@@ -0,0 +1,279 @@
|
||||||
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||||
|
+/*
|
||||||
|
+ * Copyright (C) 2023 Zoltan HERPAI <wigyori@uid0.hu>
|
||||||
|
+ *
|
||||||
|
+ * Based on sun8i-h2-plus-bananapi-m2-zero.dts, which is:
|
||||||
|
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+/dts-v1/;
|
||||||
|
+#include "sun8i-h3.dtsi"
|
||||||
|
+#include "sunxi-common-regulators.dtsi"
|
||||||
|
+
|
||||||
|
+#include <dt-bindings/gpio/gpio.h>
|
||||||
|
+#include <dt-bindings/input/input.h>
|
||||||
|
+
|
||||||
|
+/ {
|
||||||
|
+ model = "Banana Pi BPI-P2-Zero";
|
||||||
|
+ compatible = "sinovoip,bpi-p2-zero", "allwinner,sun8i-h2-plus";
|
||||||
|
+
|
||||||
|
+ aliases {
|
||||||
|
+ serial0 = &uart0;
|
||||||
|
+ serial1 = &uart1;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ chosen {
|
||||||
|
+ stdout-path = "serial0:115200n8";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ connector {
|
||||||
|
+ compatible = "hdmi-connector";
|
||||||
|
+ type = "c";
|
||||||
|
+
|
||||||
|
+ port {
|
||||||
|
+ hdmi_con_in: endpoint {
|
||||||
|
+ remote-endpoint = <&hdmi_out_con>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ leds {
|
||||||
|
+ compatible = "gpio-leds";
|
||||||
|
+
|
||||||
|
+ pwr_led {
|
||||||
|
+ label = "bananapi-p2-zero:red:pwr";
|
||||||
|
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
|
||||||
|
+ default-state = "on";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ gpio_keys {
|
||||||
|
+ compatible = "gpio-keys";
|
||||||
|
+
|
||||||
|
+ sw4 {
|
||||||
|
+ label = "power";
|
||||||
|
+ linux,code = <BTN_0>;
|
||||||
|
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ reg_vdd_cpux: vdd-cpux-regulator {
|
||||||
|
+ compatible = "regulator-gpio";
|
||||||
|
+ regulator-name = "vdd-cpux";
|
||||||
|
+ regulator-type = "voltage";
|
||||||
|
+ regulator-boot-on;
|
||||||
|
+ regulator-always-on;
|
||||||
|
+ regulator-min-microvolt = <1100000>;
|
||||||
|
+ regulator-max-microvolt = <1300000>;
|
||||||
|
+ regulator-ramp-delay = <50>; /* 4ms */
|
||||||
|
+
|
||||||
|
+ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
|
||||||
|
+ enable-active-high;
|
||||||
|
+ gpios-states = <0x1>;
|
||||||
|
+ states = <1100000 0>, <1300000 1>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ reg_vcc_dram: vcc-dram {
|
||||||
|
+ compatible = "regulator-fixed";
|
||||||
|
+ regulator-name = "vcc-dram";
|
||||||
|
+ regulator-min-microvolt = <1500000>;
|
||||||
|
+ regulator-max-microvolt = <1500000>;
|
||||||
|
+ regulator-always-on;
|
||||||
|
+ regulator-boot-on;
|
||||||
|
+ enable-active-high;
|
||||||
|
+ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
|
||||||
|
+ vin-supply = <®_vcc5v0>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ reg_vcc1v2: vcc1v2 {
|
||||||
|
+ compatible = "regulator-fixed";
|
||||||
|
+ regulator-name = "vcc1v2";
|
||||||
|
+ regulator-min-microvolt = <1200000>;
|
||||||
|
+ regulator-max-microvolt = <1200000>;
|
||||||
|
+ regulator-always-on;
|
||||||
|
+ regulator-boot-on;
|
||||||
|
+ enable-active-high;
|
||||||
|
+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
|
||||||
|
+ vin-supply = <®_vcc5v0>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ poweroff {
|
||||||
|
+ compatible = "regulator-poweroff";
|
||||||
|
+ cpu-supply = <®_vcc1v2>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ wifi_pwrseq: wifi_pwrseq {
|
||||||
|
+ compatible = "mmc-pwrseq-simple";
|
||||||
|
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
|
||||||
|
+ clocks = <&rtc 1>;
|
||||||
|
+ clock-names = "ext_clock";
|
||||||
|
+ };
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&cpu0 {
|
||||||
|
+ cpu-supply = <®_vdd_cpux>;
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&de {
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&ehci0 {
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&emac {
|
||||||
|
+ phy-handle = <&int_mii_phy>;
|
||||||
|
+ phy-mode = "mii";
|
||||||
|
+ allwinner,leds-active-low;
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&hdmi {
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&hdmi_out {
|
||||||
|
+ hdmi_out_con: endpoint {
|
||||||
|
+ remote-endpoint = <&hdmi_con_in>;
|
||||||
|
+ };
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&mmc0 {
|
||||||
|
+ vmmc-supply = <®_vcc3v3>;
|
||||||
|
+ bus-width = <4>;
|
||||||
|
+ /*
|
||||||
|
+ * On the production batch of this board the card detect GPIO is
|
||||||
|
+ * high active (card inserted), although on the early samples it's
|
||||||
|
+ * low active.
|
||||||
|
+ */
|
||||||
|
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&mmc1 {
|
||||||
|
+ vmmc-supply = <®_vcc3v3>;
|
||||||
|
+ vqmmc-supply = <®_vcc3v3>;
|
||||||
|
+ mmc-pwrseq = <&wifi_pwrseq>;
|
||||||
|
+ bus-width = <4>;
|
||||||
|
+ non-removable;
|
||||||
|
+ status = "okay";
|
||||||
|
+
|
||||||
|
+ brcmf: wifi@1 {
|
||||||
|
+ reg = <1>;
|
||||||
|
+ compatible = "brcm,bcm4329-fmac";
|
||||||
|
+ interrupt-parent = <&pio>;
|
||||||
|
+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
|
||||||
|
+ interrupt-names = "host-wake";
|
||||||
|
+ };
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&ohci0 {
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&uart0 {
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+ pinctrl-0 = <&uart0_pa_pins>;
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&uart1 {
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
||||||
|
+ uart-has-rtscts;
|
||||||
|
+ status = "okay";
|
||||||
|
+
|
||||||
|
+ bluetooth {
|
||||||
|
+ compatible = "brcm,bcm43438-bt";
|
||||||
|
+ max-speed = <1500000>;
|
||||||
|
+ clocks = <&rtc 1>;
|
||||||
|
+ clock-names = "lpo";
|
||||||
|
+ vbat-supply = <®_vcc3v3>;
|
||||||
|
+ vddio-supply = <®_vcc3v3>;
|
||||||
|
+ device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
|
||||||
|
+ host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
|
||||||
|
+ shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&pio {
|
||||||
|
+ gpio-line-names =
|
||||||
|
+ /* PA */
|
||||||
|
+ "CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15",
|
||||||
|
+ "CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29",
|
||||||
|
+ "CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05",
|
||||||
|
+ "CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16",
|
||||||
|
+ "CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27",
|
||||||
|
+ "CON2-P40", "CON2-P38", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+
|
||||||
|
+ /* PB */
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+
|
||||||
|
+ /* PC */
|
||||||
|
+ "CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24",
|
||||||
|
+ "CON2-P18", "", "", "CON2-P26",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+
|
||||||
|
+ /* PD */
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+ "", "", "", "", "", "", "CSI-PWR-EN", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+
|
||||||
|
+ /* PE */
|
||||||
|
+ "CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07",
|
||||||
|
+ "CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20",
|
||||||
|
+ "CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12",
|
||||||
|
+ "CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+
|
||||||
|
+ /* PF */
|
||||||
|
+ "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
|
||||||
|
+ "SDC0-D2", "SDC0-DET", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+
|
||||||
|
+ /* PG */
|
||||||
|
+ "WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1",
|
||||||
|
+ "WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX",
|
||||||
|
+ "BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP",
|
||||||
|
+ "BT-RST-N", "AP-WAKE-BT", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&r_pio {
|
||||||
|
+ gpio-line-names =
|
||||||
|
+ /* PL */
|
||||||
|
+ "", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36",
|
||||||
|
+ "VCC-IO-EN", "USB0-ID", "WL-PWR-EN",
|
||||||
|
+ "PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "",
|
||||||
|
+ "", "", "", "", "", "", "", "";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&usb_otg {
|
||||||
|
+ dr_mode = "otg";
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&usbphy {
|
||||||
|
+ usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
|
||||||
|
+ /*
|
||||||
|
+ * There're two micro-USB connectors, one is power-only and another is
|
||||||
|
+ * OTG. The Vbus of these two connectors are connected together, so
|
||||||
|
+ * the external USB device will be powered just by the power input
|
||||||
|
+ * from the power-only USB port.
|
||||||
|
+ */
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
@ -0,0 +1,32 @@
|
|||||||
|
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
|
||||||
|
Date: Thu, 26 Mar 2020 10:09:19 +0100
|
||||||
|
Subject: [PATCH] arm64: dts: allwinner: a64: olinuxino: add status LED aliases
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Signed-off-by: Petr Štetiar <ynezz@true.cz>
|
||||||
|
|
||||||
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
|
||||||
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
|
||||||
|
@@ -15,6 +15,10 @@
|
||||||
|
aliases {
|
||||||
|
ethernet0 = &emac;
|
||||||
|
serial0 = &uart0;
|
||||||
|
+ led-boot = &led_user;
|
||||||
|
+ led-failsafe = &led_user;
|
||||||
|
+ led-running = &led_user;
|
||||||
|
+ led-upgrade = &led_user;
|
||||||
|
};
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
@@ -35,7 +39,7 @@
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
- led-0 {
|
||||||
|
+ led_user: led-0 {
|
||||||
|
label = "a64-olinuxino:red:user";
|
||||||
|
gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
|
||||||
|
};
|
||||||
@ -0,0 +1,10 @@
|
|||||||
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
|
||||||
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
|
||||||
|
@@ -41,3 +41,7 @@
|
||||||
|
reg = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
+
|
||||||
|
+&pwm {
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
@ -0,0 +1,72 @@
|
|||||||
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
|
||||||
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
|
||||||
|
@@ -42,6 +42,11 @@
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <1800000>;
|
||||||
|
};
|
||||||
|
+
|
||||||
|
+ wifi_pwrseq: wifi_pwrseq {
|
||||||
|
+ compatible = "mmc-pwrseq-simple";
|
||||||
|
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
|
||||||
|
+ };
|
||||||
|
};
|
||||||
|
|
||||||
|
&ac_power_supply {
|
||||||
|
@@ -102,6 +107,21 @@
|
||||||
|
reg = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
+
|
||||||
|
+&mmc1 {
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+ pinctrl-0 = <&mmc1_pins>;
|
||||||
|
+ vmmc-supply = <®_dldo4>;
|
||||||
|
+ vqmmc-supply = <®_eldo1>;
|
||||||
|
+ mmc-pwrseq = <&wifi_pwrseq>;
|
||||||
|
+ bus-width = <4>;
|
||||||
|
+ non-removable;
|
||||||
|
+ status = "okay";
|
||||||
|
+
|
||||||
|
+ rtl8723cs: wifi@1 {
|
||||||
|
+ reg = <1>;
|
||||||
|
+ };
|
||||||
|
+};
|
||||||
|
|
||||||
|
&mmc2 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
|
||||||
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
|
||||||
|
@@ -35,6 +35,11 @@
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
+
|
||||||
|
+ wifi_pwrseq: wifi_pwrseq {
|
||||||
|
+ compatible = "mmc-pwrseq-simple";
|
||||||
|
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
|
||||||
|
+ };
|
||||||
|
};
|
||||||
|
|
||||||
|
&codec {
|
||||||
|
@@ -124,6 +129,21 @@
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
+&mmc1 {
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+ pinctrl-0 = <&mmc1_pins>;
|
||||||
|
+ vmmc-supply = <®_dldo4>;
|
||||||
|
+ vqmmc-supply = <®_eldo1>;
|
||||||
|
+ mmc-pwrseq = <&wifi_pwrseq>;
|
||||||
|
+ bus-width = <4>;
|
||||||
|
+ non-removable;
|
||||||
|
+ status = "okay";
|
||||||
|
+
|
||||||
|
+ rtl8723cs: wifi@1 {
|
||||||
|
+ reg = <1>;
|
||||||
|
+ };
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
&ohci0 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
Loading…
Reference in New Issue
Block a user