mirror of
https://github.com/coolsnowwolf/lede.git
synced 2025-04-19 03:43:29 +00:00
add init support for Asus RT-ACRH17
This commit is contained in:
coolsnowwolf
parent
825e1da4a6
commit
2175fb410c
@ -0,0 +1,271 @@
|
||||
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "qcom-ipq4019-ap.dk01.1.dtsi"
|
||||
#include "qcom-ipq4019-bus.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
model = "ASUS RT-ACRH17";
|
||||
compatible = "asus,rt-acrh17", "qcom,ipq4019";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>;
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &power;
|
||||
led-failsafe = &power;
|
||||
led-running = &power;
|
||||
led-upgrade = &power;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x1>;
|
||||
ranges;
|
||||
|
||||
rsvd1@87E00000 {
|
||||
reg = <0x87e00000 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
|
||||
tcsr@194b000 {
|
||||
/* select hostmode */
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x194b000 0x100>;
|
||||
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
ess_tcsr@1953000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1953000 0x1000>;
|
||||
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
||||
};
|
||||
|
||||
|
||||
tcsr@1949000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1949000 0x100>;
|
||||
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
||||
};
|
||||
|
||||
tcsr@1957000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1957000 0x100>;
|
||||
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
||||
};
|
||||
|
||||
counter@4a1000 {
|
||||
compatible = "qcom,qca-gcnt";
|
||||
reg = <0x4a1000 0x4>;
|
||||
};
|
||||
|
||||
mdio@90000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ess-switch@c000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ess-psgmii@98000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
edma@c080000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wifi@a000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wifi@a800000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
cryptobam: dma@8e04000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
crypto@8e3a000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power: status {
|
||||
label = "rt-ac58u:blue:status";
|
||||
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "rt-ac58u:blue:wan";
|
||||
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan2G {
|
||||
label = "rt-ac58u:blue:wlan2G";
|
||||
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan5G {
|
||||
label = "rt-ac58u:blue:wlan5G";
|
||||
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "rt-ac58u:blue:usb";
|
||||
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "rt-ac58u:blue:lan";
|
||||
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi_0_pins {
|
||||
pinmux_cs {
|
||||
function = "gpio";
|
||||
pins = "gpio54", "gpio59";
|
||||
};
|
||||
pinconf_cs {
|
||||
pins = "gpio54", "gpio59";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&spi_0 { /* BLSP1 QUP1 */
|
||||
status = "ok";
|
||||
cs-gpios = <&tlmm 54 0>,
|
||||
<&tlmm 59 0>;
|
||||
|
||||
mx25l25635e@0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
/*
|
||||
* U-boot looks for "n25q128a11" node,
|
||||
* if we don't have it, it will spit out the following warning:
|
||||
* "ipq: fdt fixup unable to find compatible node".
|
||||
*/
|
||||
compatible = "mx25l1606e", "n25q128a11", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
|
||||
spi-max-frequency = <24000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition0@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x00000000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition1@40000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x00040000 0x00020000>;
|
||||
read-only;
|
||||
};
|
||||
partition2@60000 {
|
||||
label = "QSEE";
|
||||
reg = <0x00060000 0x00060000>;
|
||||
read-only;
|
||||
};
|
||||
partition3@c0000 {
|
||||
label = "CDT";
|
||||
reg = <0x000c0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
partition4@d0000 {
|
||||
label = "DDRPARAMS";
|
||||
reg = <0x000d0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
partition5@e0000 {
|
||||
label = "APPSBLENV"; /* uboot env*/
|
||||
reg = <0x000e0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
partition5@f0000 {
|
||||
label = "APPSBL"; /* uboot */
|
||||
reg = <0x000f0000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
partition5@170000 {
|
||||
label = "ART";
|
||||
reg = <0x00170000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
/* 0x00180000 - 0x00200000 unused */
|
||||
};
|
||||
};
|
||||
|
||||
mt29f@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "spinand,mt29f", "w25n01gv";
|
||||
reg = <1>;
|
||||
spi-max-frequency = <24000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition0@0 {
|
||||
label = "ubi";
|
||||
reg = <0x00000000 0x08000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -0,0 +1,448 @@
|
||||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Buffalo WXR-2533DHP";
|
||||
compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &uart4;
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power_white;
|
||||
led-failsafe = &power_orange;
|
||||
led-running = &power_white;
|
||||
led-upgrade = &power_orange;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyMSM0,115200n8 ubi.mtd=0 ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
|
||||
linux,stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
soc {
|
||||
pinmux@800000 {
|
||||
i2c4_pins: i2c4_pinmux {
|
||||
mux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
drive-strength = <10>;
|
||||
bias-none;
|
||||
};
|
||||
};
|
||||
|
||||
nand_pins: nand_pins {
|
||||
mux {
|
||||
pins = "gpio34", "gpio35", "gpio36",
|
||||
"gpio37", "gpio38", "gpio39",
|
||||
"gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
function = "nand";
|
||||
drive-strength = <10>;
|
||||
bias-disable;
|
||||
};
|
||||
pullups {
|
||||
pins = "gpio39";
|
||||
bias-pull-up;
|
||||
};
|
||||
hold {
|
||||
pins = "gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
bias-bus-hold;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
mux {
|
||||
pins = "gpio0", "gpio1";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
mux {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
||||
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
||||
function = "rgmii2";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22", "gpio23",
|
||||
"gpio24", "gpio25", "gpio26", "gpio53";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
nand@1ac00000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
rootfs@0000000 {
|
||||
label = "rootfs";
|
||||
reg = <0x0000000 0x4000000>;
|
||||
};
|
||||
|
||||
rootfs_1@4000000 {
|
||||
label = "rootfs_1";
|
||||
reg = <0x4000000 0x4000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16300000 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "ok";
|
||||
|
||||
uart4: serial@16340000 {
|
||||
status = "ok";
|
||||
};
|
||||
/*
|
||||
* The i2c device on gsbi4 should not be enabled.
|
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||||
* RPM usage. Turning this on in kernel manifests as
|
||||
* i2c failure for the RPM.
|
||||
*/
|
||||
};
|
||||
|
||||
gsbi5: gsbi@1a200000 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "ok";
|
||||
|
||||
spi5: spi@1a280000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
flash: m25p80@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
SBL1@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
MIBIB@10000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x10000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL2@30000 {
|
||||
label = "SBL2";
|
||||
reg = <0x30000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL3@60000 {
|
||||
label = "SBL3";
|
||||
reg = <0x60000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
DDRCONFIG@90000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x90000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SSD@a0000 {
|
||||
label = "SSD";
|
||||
reg = <0xa0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TZ@b0000 {
|
||||
label = "TZ";
|
||||
reg = <0xb0000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
RPM@e0000 {
|
||||
label = "RPM";
|
||||
reg = <0xe0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@100000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x100000 0x70000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@170000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x170000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
ART: ART@180000 {
|
||||
label = "ART";
|
||||
reg = <0x180000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
BOOTCONFIG@1c0000 {
|
||||
label = "OLDART";
|
||||
reg = <0x1c0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL_1@1d0000 {
|
||||
label = "APPSBL_1";
|
||||
reg = <0x1d0000 0x70000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
phy@100f8800 { /* USB3 port 1 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8830 { /* USB3 port 1 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8800 { /* USB3 port 0 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8830 { /* USB3 port 0 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@0 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@1 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie0: pci@1b500000 {
|
||||
status = "ok";
|
||||
phy-tx0-term-offset = <7>;
|
||||
};
|
||||
|
||||
pcie1: pci@1b700000 {
|
||||
status = "ok";
|
||||
phy-tx0-term-offset = <7>;
|
||||
};
|
||||
|
||||
mdio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: ethernet@37200000 {
|
||||
status = "ok";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
qcom,phy_mdio_addr = <4>;
|
||||
qcom,poll_required = <1>;
|
||||
qcom,rgmii_delay = <0>;
|
||||
qcom,emulation = <0>;
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
mtd-mac-address = <&ART 6>;
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
//lan
|
||||
gmac2: ethernet@37400000 {
|
||||
status = "ok";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
qcom,phy_mdio_addr = <0>; /* none */
|
||||
qcom,poll_required = <0>; /* no polling */
|
||||
qcom,rgmii_delay = <0>;
|
||||
qcom,emulation = <0>;
|
||||
mtd-mac-address = <&ART 0>;
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
rpm@108000 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
aoss {
|
||||
label = "aoss";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power_white: power_white {
|
||||
label = "wxr-2533dhp:white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
power_orange: power_orange {
|
||||
label = "wxr-2533dhp:orange:power";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
wireless_white: wireless_white {
|
||||
label = "wxr-2533dhp:white:wireless";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wireless_orange: wireless_orange {
|
||||
label = "wxr-2533dhp:orange:wireless";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
internet_white: internet_white {
|
||||
label = "wxr-2533dhp:white:internet";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
internet_orange: internet_orange {
|
||||
label = "wxr-2533dhp:orange:internet";
|
||||
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
router_white: router_white {
|
||||
label = "wxr-2533dhp:white:router";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_orange: router_orange {
|
||||
label = "wxr-2533dhp:orange:router";
|
||||
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb_green: usb_green {
|
||||
label = "wxr-2533dhp:green:usb";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
guest_green: guest_green {
|
||||
label = "wxr-2533dhp:green:guest";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "ok";
|
||||
};
|
||||
@ -252,6 +252,24 @@ define Device/RT-AC58U
|
||||
DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-rt-ac58u
|
||||
endef
|
||||
|
||||
define Device/RT-ACRH17
|
||||
$(call Device/FitImageLzma)
|
||||
DEVICE_DTS := qcom-ipq4019-rt-acrh17
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DTB_SIZE := 65536
|
||||
BOARD_NAME := rt-acrh17
|
||||
KERNEL_LOADADDR := 0x80208000
|
||||
DEVICE_TITLE := Asus RT-ACRH17
|
||||
IMAGE_SIZE := 20439364
|
||||
FILESYSTEMS := squashfs
|
||||
UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-ACRH17')
|
||||
IMAGES = sysupgrade.tar flash-factory.trx
|
||||
IMAGE/flash-factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
|
||||
IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
|
||||
DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-rt-ac58u ath10k-firmware-qca9984
|
||||
endef
|
||||
|
||||
define Device/NBG6817
|
||||
DEVICE_DTS := qcom-ipq8065-nbg6817
|
||||
KERNEL_SIZE := 4096k
|
||||
@ -293,8 +311,8 @@ define Device/AP-DK04.1-C1
|
||||
endef
|
||||
|
||||
TARGET_DEVICES += AP148 AP148-legacy C2600 D7800 DB149 EA8500 FRITZ4040 R7500 \
|
||||
R7500v2 R7800 RT-AC58U NBG6817 VR2600v AP-DK04.1-C1
|
||||
R7500v2 R7800 RT-AC58U RT-ACRH17 NBG6817 VR2600v AP-DK04.1-C1
|
||||
|
||||
.NOTPARALLEL:
|
||||
|
||||
$(eval $(call BuildImage))
|
||||
$(eval $(call BuildImage))
|
||||
Loading…
Reference in New Issue
Block a user