diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-acrh17.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-acrh17.dts
new file mode 100644
index 000000000..1eb4b2e6f
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-acrh17.dts
@@ -0,0 +1,271 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019-ap.dk01.1.dtsi"
+#include "qcom-ipq4019-bus.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "ASUS RT-ACRH17";
+	compatible = "asus,rt-acrh17", "qcom,ipq4019";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+	};
+
+	reserved-memory {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+
+		rsvd1@87E00000 {
+			reg = <0x87e00000 0x200000>;
+			no-map;
+		};
+	};
+
+	soc {
+
+		tcsr@194b000 {
+			/* select hostmode */
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+			status = "ok";
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		counter@4a1000 {
+			compatible = "qcom,qca-gcnt";
+			reg = <0x4a1000 0x4>;
+		};
+
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+
+		wifi@a000000 {
+			status = "okay";
+		};
+
+		wifi@a800000 {
+			status = "okay";
+		};
+
+		cryptobam: dma@8e04000 {
+			status = "okay";
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power: status {
+			label = "rt-ac58u:blue:status";
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan {
+			label = "rt-ac58u:blue:wan";
+			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2G {
+			label = "rt-ac58u:blue:wlan2G";
+			gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan5G {
+			label = "rt-ac58u:blue:wlan5G";
+			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb {
+			label = "rt-ac58u:blue:usb";
+			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan {
+			label = "rt-ac58u:blue:lan";
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&spi_0_pins {
+	pinmux_cs {
+		function = "gpio";
+		pins = "gpio54", "gpio59";
+	};
+	pinconf_cs {
+		pins = "gpio54", "gpio59";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+};
+
+
+&spi_0 { /* BLSP1 QUP1 */
+	status = "ok";
+	cs-gpios = <&tlmm 54 0>,
+		   <&tlmm 59 0>;
+
+	mx25l25635e@0 {
+		status = "disabled";
+	};
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/*
+		 * U-boot looks for "n25q128a11" node,
+		 * if we don't have it, it will spit out the following warning:
+		 * "ipq: fdt fixup unable to find compatible node".
+		 */
+		compatible = "mx25l1606e", "n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition0@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition1@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition2@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+			partition3@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+			partition4@d0000 {
+				label = "DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+			partition5@e0000 {
+				label = "APPSBLENV"; /* uboot env*/
+				reg = <0x000e0000 0x00010000>;
+				read-only;
+			};
+			partition5@f0000 {
+				label = "APPSBL"; /* uboot */
+				reg = <0x000f0000 0x00080000>;
+				read-only;
+			};
+			partition5@170000 {
+				label = "ART";
+				reg = <0x00170000 0x00010000>;
+				read-only;
+			};
+			/* 0x00180000 - 0x00200000 unused */
+		};
+	};
+
+	mt29f@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "spinand,mt29f", "w25n01gv";
+		reg = <1>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition0@0 {
+				label = "ubi";
+				reg = <0x00000000 0x08000000>;
+			};
+		};
+	};
+};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
new file mode 100644
index 000000000..2d6957e56
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
@@ -0,0 +1,448 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Buffalo WXR-2533DHP";
+	compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		serial0 = &uart4;
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &power_white;
+		led-failsafe = &power_orange;
+		led-running = &power_white;
+		led-upgrade = &power_orange;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200n8 ubi.mtd=0 ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
+		linux,stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		pinmux@800000 {
+			i2c4_pins: i2c4_pinmux {
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			spi_pins: spi_pins {
+				mux {
+					pins = "gpio18", "gpio19", "gpio21";
+					function = "gsbi5";
+					drive-strength = <10>;
+					bias-none;
+				};
+			};
+
+			nand_pins: nand_pins {
+				mux {
+					pins = "gpio34", "gpio35", "gpio36",
+					       "gpio37", "gpio38", "gpio39",
+					       "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
+					bias-disable;
+				};
+				pullups {
+					pins = "gpio39";
+					bias-pull-up;
+				};
+				hold {
+					pins = "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					bias-bus-hold;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			rgmii2_pins: rgmii2_pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			led_pins: led_pins {
+				mux {
+					pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22", "gpio23", 
+						"gpio24", "gpio25", "gpio26", "gpio53";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			button_pins: button_pins {
+				mux {
+					pins = "gpio54", "gpio65";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+		};
+
+		nand@1ac00000 {
+			status = "ok";
+
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+
+			cs0 {
+				reg = <0>;
+				compatible = "qcom,nandcs";
+
+				nand-ecc-strength = <4>;
+				nand-bus-width = <8>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					rootfs@0000000 {
+						label = "rootfs";
+						reg = <0x0000000 0x4000000>;
+					};
+
+					rootfs_1@4000000 {
+						label = "rootfs_1";
+						reg = <0x4000000 0x4000000>;
+					};
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+			
+			uart4: serial@16340000 {
+				status = "ok";
+			};
+			/*
+			 * The i2c device on gsbi4 should not be enabled.
+			 * On ipq806x designs gsbi4 i2c is meant for exclusive
+			 * RPM usage. Turning this on in kernel manifests as
+			 * i2c failure for the RPM.
+			 */
+		};
+
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "ok";
+
+			spi5: spi@1a280000 {
+				status = "ok";
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+				flash: m25p80@0 {
+					compatible = "jedec,spi-nor";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					SBL1@0 {
+						label = "SBL1";
+						reg = <0x0 0x10000>;
+						read-only;
+					};
+
+					MIBIB@10000 {
+						label = "MIBIB";
+						reg = <0x10000 0x20000>;
+						read-only;
+					};
+
+					SBL2@30000 {
+						label = "SBL2";
+						reg = <0x30000 0x30000>;
+						read-only;
+					};
+
+					SBL3@60000 {
+						label = "SBL3";
+						reg = <0x60000 0x30000>;
+						read-only;
+					};
+
+					DDRCONFIG@90000 {
+						label = "DDRCONFIG";
+						reg = <0x90000 0x10000>;
+						read-only;
+					};
+
+					SSD@a0000 {
+						label = "SSD";
+						reg = <0xa0000 0x10000>;
+						read-only;
+					};
+
+					TZ@b0000 {
+						label = "TZ";
+						reg = <0xb0000 0x30000>;
+						read-only;
+					};
+
+					RPM@e0000 {
+						label = "RPM";
+						reg = <0xe0000 0x20000>;
+						read-only;
+					};
+
+					APPSBL@100000 {
+						label = "APPSBL";
+						reg = <0x100000 0x70000>;
+						read-only;
+					};
+
+					APPSBLENV@170000 {
+						label = "APPSBLENV";
+						reg = <0x170000 0x10000>;
+						read-only;
+					};
+
+					ART: ART@180000 {
+						label = "ART";
+						reg = <0x180000 0x40000>;
+						read-only;
+					};
+
+					BOOTCONFIG@1c0000 {
+						label = "OLDART";
+						reg = <0x1c0000 0x10000>;
+						read-only;
+					};
+
+					APPSBL_1@1d0000 {
+						label = "APPSBL_1";
+						reg = <0x1d0000 0x70000>;
+					};
+				};
+			};
+		};
+
+		phy@100f8800 {		/* USB3 port 1 HS phy */
+			status = "ok";
+		};
+
+		phy@100f8830 {		/* USB3 port 1 SS phy */
+			status = "ok";
+		};
+
+		phy@110f8800 {		/* USB3 port 0 HS phy */
+			status = "ok";
+		};
+
+		phy@110f8830 {		/* USB3 port 0 SS phy */
+			status = "ok";
+		};
+
+		usb30@0 {
+			status = "ok";
+		};
+
+		usb30@1 {
+			status = "ok";
+		};
+
+		pcie0: pci@1b500000 {
+			status = "ok";
+			phy-tx0-term-offset = <7>;
+		};
+
+		pcie1: pci@1b700000 {
+			status = "ok";
+			phy-tx0-term-offset = <7>;
+		};
+
+		mdio0: mdio {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&mdio0_pins>;
+			pinctrl-names = "default";
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+				qca,ar8327-initvals = <
+					0x00004 0x7600000   /* PAD0_MODE */
+					0x00008 0x1000000   /* PAD5_MODE */
+					0x0000c 0x80        /* PAD6_MODE */
+					0x000e4 0x6a545     /* MAC_POWER_SEL */
+					0x000e0 0xc74164de  /* SGMII_CTRL */
+					0x0007c 0x4e        /* PORT0_STATUS */
+					0x00094 0x4e        /* PORT6_STATUS */
+					>;
+			};
+
+			phy4: ethernet-phy@4 {
+				device_type = "ethernet-phy";
+				reg = <4>;
+			};
+		};
+
+		gmac1: ethernet@37200000 {
+			status = "ok";
+			phy-mode = "rgmii";
+			qcom,id = <1>;
+			qcom,phy_mdio_addr = <4>;
+			qcom,poll_required = <1>;
+			qcom,rgmii_delay = <0>;
+			qcom,emulation = <0>;
+			pinctrl-0 = <&rgmii2_pins>;
+			pinctrl-names = "default";
+			mtd-mac-address = <&ART 6>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+		//lan
+		gmac2: ethernet@37400000 {
+			status = "ok";
+			phy-mode = "sgmii";
+			qcom,id = <2>;
+			qcom,phy_mdio_addr = <0>;	/* none */
+			qcom,poll_required = <0>;	/* no polling */
+			qcom,rgmii_delay = <0>;
+			qcom,emulation = <0>;
+			mtd-mac-address = <&ART 0>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		aoss {
+			label = "aoss";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		power_white: power_white {
+			label = "wxr-2533dhp:white:power";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		power_orange: power_orange {
+			label = "wxr-2533dhp:orange:power";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		wireless_white: wireless_white {
+			label = "wxr-2533dhp:white:wireless";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		wireless_orange: wireless_orange {
+			label = "wxr-2533dhp:orange:wireless";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		internet_white: internet_white {
+			label = "wxr-2533dhp:white:internet";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		internet_orange: internet_orange {
+			label = "wxr-2533dhp:orange:internet";
+			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		router_white: router_white {
+			label = "wxr-2533dhp:white:router";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+		};
+
+		router_orange: router_orange {
+			label = "wxr-2533dhp:orange:router";
+			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb_green: usb_green {
+			label = "wxr-2533dhp:green:usb";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		guest_green: guest_green {
+			label = "wxr-2533dhp:green:guest";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&adm_dma {
+	status = "ok";
+};
diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index d0a22242b..09ce82b93 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -252,6 +252,24 @@ define Device/RT-AC58U
 	DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-rt-ac58u
 endef
 
+define Device/RT-ACRH17
+	$(call Device/FitImageLzma)
+	DEVICE_DTS := qcom-ipq4019-rt-acrh17
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DTB_SIZE := 65536
+	BOARD_NAME := rt-acrh17
+	KERNEL_LOADADDR := 0x80208000
+	DEVICE_TITLE := Asus RT-ACRH17
+	IMAGE_SIZE := 20439364
+	FILESYSTEMS := squashfs
+	UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-ACRH17')
+	IMAGES = sysupgrade.tar flash-factory.trx
+	IMAGE/flash-factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
+	IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+	DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-rt-ac58u ath10k-firmware-qca9984
+endef
+
 define Device/NBG6817
 	DEVICE_DTS := qcom-ipq8065-nbg6817
 	KERNEL_SIZE := 4096k
@@ -293,8 +311,8 @@ define Device/AP-DK04.1-C1
 endef
 
 TARGET_DEVICES += AP148 AP148-legacy C2600 D7800 DB149 EA8500 FRITZ4040 R7500 \
-		  R7500v2 R7800 RT-AC58U NBG6817 VR2600v AP-DK04.1-C1
+		  R7500v2 R7800 RT-AC58U RT-ACRH17 NBG6817 VR2600v AP-DK04.1-C1
 
 .NOTPARALLEL:
 
-$(eval $(call BuildImage))
+$(eval $(call BuildImage))
\ No newline at end of file