mirror of
https://github.com/coolsnowwolf/lede.git
synced 2025-04-16 14:23:38 +00:00
8061c8b8f9
* kernel: crypto: add atmel i2c hw accelerator support Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> * kernel: add led act/polarity select for rtl8221 phy Signed-off-by: Tianling Shen <cnsztl@gmail.com> * mediatek: add support for OpenEmbed SOM7981 Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 256 MiB SPI-NAND RAM: 0.5/1 GB DDR4 Ethernet: 1x 1GbE, 1x 2.5GbE (RTL8221B) WiFi: MediaTek MT7976C USB: 1x M.2 B-Key GPIO: 26-Pin header UART: 6 GND, 8 TX, 10 RX (in Pin header) Button: Reset Installation: The board comes with a third-party custom OpenWrt image, you can upload sysupgrade image via LuCI directly WITHOUT keeping configurations. Or power on the board with pressing reset button for 5 second, then visit http://192.168.1.1 and upload -factory.bin firmware. Signed-off-by: Tianling Shen <cnsztl@gmail.com> --------- Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> Signed-off-by: Tianling Shen <cnsztl@gmail.com> |
||
|---|---|---|
| .. | ||
| base-files | ||
| boot | ||
| devel | ||
| firmware | ||
| kernel | ||
| lean | ||
| libs | ||
| network | ||
| qat | ||
| qca | ||
| system | ||
| utils | ||
| wwan | ||
| Makefile | ||