lede/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g-nat200.dts

// SPDX-License-Identifier: GPL-2.0-or-later

#include "qcom-ipq8064-v2.0.dtsi"

#include <dt-bindings/input/input.h>

/ {
	model = "SURF G-NAT200";
	compatible = "surf,g-nat200", "qcom,ipq8064";

	memory@0 {
		reg = <0x42000000 0x3e000000>;
		device_type = "memory";
	};

	aliases {
		led-boot = &led_usb;
		led-failsafe = &led_usb;
		led-upgrade = &led_usb;

		mdio-gpio0 = &mdio0;
	};

	keys {
		compatible = "gpio-keys";
		pinctrl-0 = <&button_pins>;
		pinctrl-names = "default";

		reset {
			label = "reset";
			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
			debounce-interval = <60>;
			wakeup-source;
		};
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-0 = <&led_pins>;
		pinctrl-names = "default";

		led_usb: usb {
			label = "green:usb";
			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
		};

		sata {
			label = "green:sata";
			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
		};

		internet {
			label = "green:internet";
			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
		};
	};
};

&qcom_pinmux {
	led_pins: led_pins {
		mux {
			pins = "gpio7", "gpio26", "gpio67";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	button_pins: button_pins {
		mux {
			pins = "gpio54";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	spi_pins: spi_pins {
		mux {
			pins = "gpio18", "gpio19", "gpio21";
			function = "gsbi5";
			drive-strength = <10>;
			bias-none;
		};

		cs {
			pins = "gpio20";
			drive-strength = <12>;
		};
	};
};

&gsbi5 {
	qcom,mode = <GSBI_PROT_SPI>;
	status = "okay";

	spi@1a280000 {
		status = "okay";

		pinctrl-0 = <&spi_pins>;
		pinctrl-names = "default";

		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;

		flash@0 {
			compatible = "s25fl256s1";
			#address-cells = <1>;
			#size-cells = <1>;
			spi-max-frequency = <50000000>;
			reg = <0>;

			partitions {
				compatible = "fixed-partitions";
				#address-cells = <1>;
				#size-cells = <1>;

				SBL1@0 {
					label = "SBL1";
					reg = <0x0 0x20000>;
					read-only;
				};

				MIBIB@20000 {
					label = "MIBIB";
					reg = <0x20000 0x20000>;
					read-only;
				};

				SBL2@40000 {
					label = "SBL2";
					reg = <0x40000 0x40000>;
					read-only;
				};

				SBL3@80000 {
					label = "SBL3";
					reg = <0x80000 0x80000>;
					read-only;
				};

				DDRCONFIG@100000 {
					label = "DDRCONFIG";
					reg = <0x100000 0x10000>;
					read-only;
				};

				SSD@110000 {
					label = "SSD";
					reg = <0x110000 0x10000>;
					read-only;
				};

				TZ@120000 {
					label = "TZ";
					reg = <0x120000 0x80000>;
					read-only;
				};

				RPM@1a0000 {
					label = "RPM";
					reg = <0x1a0000 0x80000>;
					read-only;
				};

				APPSBL@220000 {
					label = "APPSBL";
					reg = <0x220000 0x80000>;
					read-only;
				};

				APPSBLENV@2a0000 {
					label = "APPSBLENV";
					reg = <0x2a0000 0x40000>;
					read-only;
				};

				ART: ART@2e0000 {
					label = "ART";
					reg = <0x2e0000 0x40000>;
					read-only;
				};

				firmware@320000 {
					compatible = "denx,uimage";
					label = "firmware";
					reg = <0x320000 0x1a00000>;
				};
			};
		};
	};
};

&nand_controller {
	status = "okay";

	pinctrl-0 = <&nand_pins>;
	pinctrl-names = "default";

	nand@0 {
		reg = <0>;
		compatible = "qcom,nandcs";

		nand-ecc-strength = <4>;
		nand-bus-width = <8>;
		nand-ecc-step-size = <512>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "ubifs";
				reg = <0x0 0x1eaac000>;
			};
		};
	};
};

&mdio0 {
	status = "okay";

	pinctrl-0 = <&mdio0_pins>;
	pinctrl-names = "default";

	phy0: ethernet-phy@0 {
		reg = <0>;
		qca,ar8327-initvals = <
			0x00004 0x7600000   /* PAD0_MODE */
			0x00008 0x1000000   /* PAD5_MODE */
			0x0000c 0x80        /* PAD6_MODE */
			0x000e4 0x6a545     /* MAC_POWER_SEL */
			0x000e0 0xc74164de  /* SGMII_CTRL */
			0x0007c 0x4e        /* PORT0_STATUS */
			0x00094 0x4e        /* PORT6_STATUS */
			>;
	};

	phy4: ethernet-phy@4 {
		reg = <4>;
	};
};

&gmac1 {
	status = "okay";
	compatible = "qcom,nss-gmac";
	reg = <0x37200000 0x200000>;
	interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
	phy-mode = "rgmii";
	qcom,id = <1>;
	qcom,pcs-chanid = <0>;
	qcom,phy-mdio-addr = <4>;
	qcom,poll-required = <0>;
	qcom,rgmii-delay = <1>;
	qcom,phy_mii_type = <0>;
	qcom,emulation = <0>;
	qcom,forced-speed = <1000>;
	qcom,forced-duplex = <1>;
	qcom,socver = <0>;
	qcom,irq = <255>;
	mdiobus = <&mdio0>;

	pinctrl-0 = <&rgmii2_pins>;
	pinctrl-names = "default";

	mtd-mac-address = <&ART 0x6>;

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&gmac2 {
	status = "okay";
	compatible = "qcom,nss-gmac";
	reg = <0x37400000 0x200000>;
	interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
	phy-mode = "sgmii";
	qcom,id = <2>;
	qcom,pcs-chanid = <1>;
	qcom,phy-mdio-addr = <0>;
	qcom,poll-required = <0>;
	qcom,rgmii-delay = <0>;
	qcom,phy_mii_type = <1>;
	qcom,emulation = <0>;
	qcom,forced-speed = <1000>;
	qcom,forced-duplex = <1>;
	qcom,socver = <0>;
	qcom,irq = <258>;
	mdiobus = <&mdio0>;

	mtd-mac-address = <&ART 0xc>;

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&adm_dma {
	status = "okay";
};

&pcie1 {
	status = "okay";
	max-link-speed = <1>;
};

&sata_phy {
	status = "okay";
};

&sata {
	status = "okay";
};

&usb3_0 {
	status = "okay";
};

&usb3_1 {
	status = "okay";
};