mirror of
https://github.com/coolsnowwolf/lede.git
synced 2025-04-16 04:13:31 +00:00
326 lines
7.0 KiB
Diff
326 lines
7.0 KiB
Diff
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
|
|
index c6af87cf5e..61afe94a05 100644
|
|
--- a/arch/arm/dts/Makefile
|
|
+++ b/arch/arm/dts/Makefile
|
|
@@ -107,6 +107,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \
|
|
dtb-$(CONFIG_ROCKCHIP_RK3328) += \
|
|
rk3328-evb.dtb \
|
|
- rk3328-rock64.dtb
|
|
+ rk3328-rock64.dtb \
|
|
+ rk3328-rock-pi-e.dtb
|
|
|
|
dtb-$(CONFIG_ROCKCHIP_RK3368) += \
|
|
rk3368-lion.dtb \
|
|
diff --git a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
|
|
new file mode 100644
|
|
index 0000000000..bf5b1f3adc
|
|
--- /dev/null
|
|
+++ b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
|
|
@@ -0,0 +1,33 @@
|
|
+// SPDX-License-Identifier: GPL-2.0+
|
|
+/*
|
|
+ * (C) Copyright 2020 Radxa
|
|
+ */
|
|
+
|
|
+#include "rk3328-u-boot.dtsi"
|
|
+#include "rk3328-sdram-ddr3-666.dtsi"
|
|
+
|
|
+&gpio0 {
|
|
+ u-boot,dm-spl;
|
|
+};
|
|
+
|
|
+&pinctrl {
|
|
+ u-boot,dm-spl;
|
|
+};
|
|
+
|
|
+&sdmmc0m1_gpio {
|
|
+ u-boot,dm-spl;
|
|
+};
|
|
+
|
|
+&pcfg_pull_up_4ma {
|
|
+ u-boot,dm-spl;
|
|
+};
|
|
+
|
|
+&usb_host0_xhci {
|
|
+ vbus-supply = <&vcc5v0_host_xhci>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+/* Need this and all the pinctrl/gpio stuff above to set pinmux */
|
|
+&vcc_sd {
|
|
+ u-boot,dm-spl;
|
|
+};
|
|
diff --git a/arch/arm/dts/rk3328-rock-pi-e.dts b/arch/arm/dts/rk3328-rock-pi-e.dts
|
|
new file mode 100644
|
|
index 0000000000..4b9f9a8248
|
|
--- /dev/null
|
|
+++ b/arch/arm/dts/rk3328-rock-pi-e.dts
|
|
@@ -0,0 +1,267 @@
|
|
+// SPDX-License-Identifier: GPL-2.0+
|
|
+/*
|
|
+ * (C) Copyright 2020 Radxa
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+#include "rk3328.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Radxa Rock Pi E";
|
|
+ compatible = "radxa,rock-pi-e", "rockchip,rk3328";
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial2:1500000n8";
|
|
+ };
|
|
+
|
|
+ gmac_clkin: external-gmac-clock {
|
|
+ compatible = "fixed-clock";
|
|
+ clock-frequency = <125000000>;
|
|
+ clock-output-names = "gmac_clkin";
|
|
+ #clock-cells = <0>;
|
|
+ };
|
|
+
|
|
+ vcc_sd: sdmmc-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sdmmc0m1_gpio>;
|
|
+ regulator-name = "vcc_sd";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ vin-supply = <&vcc_io>;
|
|
+ };
|
|
+
|
|
+ vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
|
|
+ compatible = "regulator-fixed";
|
|
+ enable-active-high;
|
|
+ regulator-name = "vcc5v0_host_xhci";
|
|
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ };
|
|
+
|
|
+ vcc_sys: vcc-sys {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc_sys";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&cpu0 {
|
|
+ cpu-supply = <&vdd_arm>;
|
|
+};
|
|
+
|
|
+&cpu1 {
|
|
+ cpu-supply = <&vdd_arm>;
|
|
+};
|
|
+
|
|
+&cpu2 {
|
|
+ cpu-supply = <&vdd_arm>;
|
|
+};
|
|
+
|
|
+&cpu3 {
|
|
+ cpu-supply = <&vdd_arm>;
|
|
+};
|
|
+
|
|
+&emmc {
|
|
+ bus-width = <8>;
|
|
+ cap-mmc-highspeed;
|
|
+ mmc-hs200-1_8v;
|
|
+ supports-emmc;
|
|
+ disable-wp;
|
|
+ non-removable;
|
|
+ num-slots = <1>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
|
+ vmmc-supply = <&vcc_io>;
|
|
+ vqmmc-supply = <&vcc18_emmc>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&gmac2io {
|
|
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
|
|
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
|
|
+ clock_in_out = "input";
|
|
+ phy-supply = <&vcc_io>;
|
|
+ phy-mode = "rgmii";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&rgmiim1_pins>;
|
|
+ snps,force_thresh_dma_mode;
|
|
+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
+ snps,reset-active-low;
|
|
+ snps,reset-delays-us = <0 10000 50000>;
|
|
+ tx_delay = <0x26>;
|
|
+ rx_delay = <0x11>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&i2c1 {
|
|
+ status = "okay";
|
|
+
|
|
+ rk805: rk805@18 {
|
|
+ compatible = "rockchip,rk805";
|
|
+ status = "okay";
|
|
+ reg = <0x18>;
|
|
+ interrupt-parent = <&gpio2>;
|
|
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
|
|
+ #clock-cells = <1>;
|
|
+ clock-output-names = "xin32k", "rk805-clkout2";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pmic_int_l>;
|
|
+ rockchip,system-power-controller;
|
|
+ wakeup-source;
|
|
+
|
|
+ vcc1-supply = <&vcc_sys>;
|
|
+ vcc2-supply = <&vcc_sys>;
|
|
+ vcc3-supply = <&vcc_sys>;
|
|
+ vcc4-supply = <&vcc_sys>;
|
|
+ vcc5-supply = <&vcc_io>;
|
|
+ vcc6-supply = <&vcc_sys>;
|
|
+
|
|
+ regulators {
|
|
+ vdd_logic: DCDC_REG1 {
|
|
+ regulator-name = "vdd_logic";
|
|
+ regulator-min-microvolt = <712500>;
|
|
+ regulator-max-microvolt = <1450000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1000000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_arm: DCDC_REG2 {
|
|
+ regulator-name = "vdd_arm";
|
|
+ regulator-min-microvolt = <712500>;
|
|
+ regulator-max-microvolt = <1450000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <950000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_ddr: DCDC_REG3 {
|
|
+ regulator-name = "vcc_ddr";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_io: DCDC_REG4 {
|
|
+ regulator-name = "vcc_io";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <3300000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_18: LDO_REG1 {
|
|
+ regulator-name = "vcc_18";
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc18_emmc: LDO_REG2 {
|
|
+ regulator-name = "vcc18_emmc";
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_10: LDO_REG3 {
|
|
+ regulator-name = "vdd_10";
|
|
+ regulator-min-microvolt = <1000000>;
|
|
+ regulator-max-microvolt = <1000000>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1000000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&io_domains {
|
|
+ status = "okay";
|
|
+
|
|
+ vccio1-supply = <&vcc_io>;
|
|
+ vccio2-supply = <&vcc18_emmc>;
|
|
+ vccio3-supply = <&vcc_io>;
|
|
+ vccio4-supply = <&vcc_io>;
|
|
+ vccio5-supply = <&vcc_io>;
|
|
+ vccio6-supply = <&vcc_io>;
|
|
+ pmuio-supply = <&vcc_io>;
|
|
+};
|
|
+
|
|
+&pinctrl {
|
|
+ pmic {
|
|
+ pmic_int_l: pmic-int-l {
|
|
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&sdmmc {
|
|
+ bus-width = <4>;
|
|
+ cap-mmc-highspeed;
|
|
+ cap-sd-highspeed;
|
|
+ card-detect-delay = <200>;
|
|
+ disable-wp;
|
|
+ max-frequency = <150000000>;
|
|
+ num-slots = <1>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
|
|
+ supports-sd;
|
|
+ vmmc-supply = <&vcc_sd>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&saradc {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart2 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb20_otg {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host0_ehci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host0_ohci {
|
|
+ status = "okay";
|
|
+};
|