298977887/lede
1
0
Fork 0
mirror of https://github.com/coolsnowwolf/lede.git synced 2025-04-16 04:13:31 +00:00
Code Issues Packages Projects Releases Wiki Activity
9dc66796d5
lede/target/linux/qualcommax/patches-6.1/0054-v6.8-arm64-dts-qcom-ipq50xx-add-dtsi.patch

1129 lines
29 KiB
Diff
Raw Blame History

--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -0,0 +1,1125 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5018 SoC device tree source
+ *
+ * Copyright (c) 2023 The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq5018.h>
+#include <dt-bindings/reset/qcom,gcc-ipq5018.h>
+
+/ {
+ interrupt-parent = <&intc>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks {
+ cmn_pll_ref_clk: cmn-pll-ref-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <96000000>;
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ xo_board_clk: xo-board-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ operating-points-v2 = <&cpu_opp_table>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ operating-points-v2 = <&cpu_opp_table>;
+ };
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>;
+ cache-unified;
+ };
+ };
+
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ /*
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <200000>;
+ };
+ */
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-ipq5018", "qcom,scm";
+ qcom,sdi-enabled;
+ qcom,dload-mode = <&tcsr 0x6100>;
+ };
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x40000000 0x0 0x0>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ tz_apps@4a400000 {
+ reg = <0x0 0x4a400000 0x0 0x400000>;
+ no-map;
+ };
+
+ bootloader@4a800000 {
+ reg = <0x0 0x4a800000 0x0 0x200000>;
+ no-map;
+ };
+
+ sbl@4aa00000 {
+ reg = <0x0 0x4aa00000 0x0 0x100000>;
+ no-map;
+ };
+
+ smem@4ab00000 {
+ compatible = "qcom,smem";
+ reg = <0x0 0x4ab00000 0x0 0x100000>;
+ no-map;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ tz_region: tz@4ac00000 {
+ reg = <0x0 0x4ac00000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+
+ usbphy0: phy@5b000 {
+ compatible = "qcom,ipq5018-usb-hsphy";
+ reg = <0x0005b000 0x120>;
+
+ clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+ resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ pcie1_phy: phy@7e000{
+ compatible = "qcom,ipq5018-uniphy-pcie-phy";
+ reg = <0x0007e000 0x800>;
+
+ clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+
+ resets = <&gcc GCC_PCIE1_PHY_BCR>,
+ <&gcc GCC_PCIE1PHY_PHY_BCR>;
+
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
+
+ num-lanes = <1>;
+
+ status = "disabled";
+ };
+
+ pcie0_phy: phy@86000{
+ compatible = "qcom,ipq5018-uniphy-pcie-phy";
+ reg = <0x00086000 0x800>;
+
+ clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+
+ resets = <&gcc GCC_PCIE0_PHY_BCR>,
+ <&gcc GCC_PCIE0PHY_PHY_BCR>;
+
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
+
+ num-lanes = <2>;
+
+ status = "disabled";
+ };
+
+ mdio0: mdio@88000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,ipq5018-mdio", "qcom,qca-mdio";
+ reg = <0x88000 0x64>;
+ clocks = <&gcc GCC_MDIO0_AHB_CLK>;
+ clock-names = "gcc_mdio_ahb_clk";
+ status = "disabled";
+
+ ge_phy: ethernet-phy@7 {
+ compatible = "ethernet-phy-id004d.d0c0";
+ reg = <7>;
+ resets = <&gcc GCC_GEPHY_BCR>,
+ <&gcc GCC_GEPHY_MDC_SW_ARES>,
+ <&gcc GCC_GEPHY_DSP_HW_ARES>,
+ <&gcc GCC_GEPHY_RX_ARES>,
+ <&gcc GCC_GEPHY_TX_ARES>;
+ clocks = <&gcc GCC_GEPHY_RX_CLK>,
+ <&gcc GCC_GEPHY_TX_CLK>;
+ };
+ };
+
+ mdio1: mdio@90000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,ipq5018-mdio";
+ reg = <0x90000 0x64>;
+ clocks = <&gcc GCC_MDIO1_AHB_CLK>;
+ clock-names = "gcc_mdio_ahb_clk";
+ status = "disabled";
+ };
+
+ cmn_pll: clock-controller@9b000 {
+ compatible = "qcom,ipq9574-cmn-pll";
+ reg = <0x0009b000 0x800>,
+ <0x19475c4 0x4>;
+ reg-names = "cmn",
+ "tcsr";
+ clocks = <&cmn_pll_ref_clk>,
+ <&gcc GCC_CMN_BLK_AHB_CLK>,
+ <&gcc GCC_CMN_BLK_SYS_CLK>;
+ clock-names = "ref", "ahb", "sys";
+ #clock-cells = <1>;
+ };
+
+ qfprom: qfprom@a0000 {
+ compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
+ reg = <0xa0000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tsens_mode: mode@249 {
+ reg = <0x249 1>;
+ bits = <0 3>;
+ };
+
+ tsens_base1: base1@249 {
+ reg = <0x249 2>;
+ bits = <3 8>;
+ };
+
+ tsens_base2: base2@24a {
+ reg = <0x24a 2>;
+ bits = <3 8>;
+ };
+
+ tsens_s0_p1: s0-p1@24b {
+ reg = <0x24b 0x2>;
+ bits = <2 6>;
+ };
+
+ tsens_s0_p2: s0-p2@24c {
+ reg = <0x24c 0x1>;
+ bits = <1 6>;
+ };
+
+ tsens_s1_p1: s1-p1@24c {
+ reg = <0x24c 0x2>;
+ bits = <7 6>;
+ };
+
+ tsens_s1_p2: s1-p2@24d {
+ reg = <0x24d 0x2>;
+ bits = <5 6>;
+ };
+
+ tsens_s2_p1: s2-p1@24e {
+ reg = <0x24e 0x2>;
+ bits = <3 6>;
+ };
+
+ tsens_s2_p2: s2-p2@24f {
+ reg = <0x24f 0x1>;
+ bits = <1 6>;
+ };
+
+ tsens_s3_p1: s3-p1@24f {
+ reg = <0x24f 0x2>;
+ bits = <7 6>;
+ };
+
+ tsens_s3_p2: s3-p2@250 {
+ reg = <0x250 0x2>;
+ bits = <5 6>;
+ };
+
+ tsens_s4_p1: s4-p1@251 {
+ reg = <0x251 0x2>;
+ bits = <3 6>;
+ };
+
+ tsens_s4_p2: s4-p2@254 {
+ reg = <0x254 0x1>;
+ bits = <0 6>;
+ };
+ };
+
+ prng: rng@e3000 {
+ compatible = "qcom,prng-ee";
+ reg = <0x000e3000 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
+ tsens: thermal-sensor@4a9000 {
+ compatible = "qcom,ipq5018-tsens";
+ reg = <0x4a9000 0x1000>, /* TM */
+ <0x4a8000 0x1000>; /* SROT */
+
+ nvmem-cells = <&tsens_mode>,
+ <&tsens_base1>,
+ <&tsens_base2>,
+ <&tsens_s0_p1>,
+ <&tsens_s0_p2>,
+ <&tsens_s1_p1>,
+ <&tsens_s1_p2>,
+ <&tsens_s2_p1>,
+ <&tsens_s2_p2>,
+ <&tsens_s3_p1>,
+ <&tsens_s3_p2>,
+ <&tsens_s4_p1>,
+ <&tsens_s4_p2>;
+
+ nvmem-cell-names = "mode",
+ "base1",
+ "base2",
+ "s0_p1",
+ "s0_p2",
+ "s1_p1",
+ "s1_p2",
+ "s2_p1",
+ "s2_p2",
+ "s3_p1",
+ "s3_p2",
+ "s4_p1",
+ "s4_p2";
+
+ interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "uplow";
+ #qcom,sensors = <5>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ cryptobam: dma-controller@704000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x00704000 0x20000>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <1>;
+ qcom,controlled-remotely;
+ status = "disabled";
+ };
+
+ crypto: crypto@73a000 {
+ compatible = "qcom,crypto-v5.1";
+ reg = <0x0073a000 0x6000>;
+ clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_CLK>;
+ clock-names = "iface", "bus", "core";
+ dmas = <&cryptobam 2>, <&cryptobam 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq5018-tlmm";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 47>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ uart1_pins: uart1-state {
+ pins = "gpio31", "gpio32", "gpio33", "gpio34";
+ function = "blsp1_uart1";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+ };
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,gcc-ipq5018";
+ reg = <0x01800000 0x80000>;
+ clocks = <&xo_board_clk>,
+ <&sleep_clk>,
+ <&pcie0_phy>,
+ <&pcie1_phy>,
+ <0>,
+ <&ge_phy 0>,
+ <&ge_phy 1>,
+ <0>,
+ <0>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ tcsr_mutex: hwlock@1905000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x01905000 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ tcsr: syscon@1937000 {
+ compatible = "qcom,tcsr-ipq5018", "syscon", "simple-mfd";
+ reg = <0x01937000 0x21000>;
+ };
+
+ pwm: pwm@1941010 {
+ compatible = "qcom,ipq5018-pwm", "qcom,ipq6018-pwm";
+ reg = <0x01941010 0x20>;
+ clocks = <&gcc GCC_ADSS_PWM_CLK>;
+ assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>;
+ assigned-clock-rates = <100000000>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ sdhc_1: mmc@7804000 {
+ compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x7804000 0x1000>;
+ reg-names = "hc";
+
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board_clk>;
+ clock-names = "iface", "core", "xo";
+ non-removable;
+ status = "disabled";
+ };
+
+ blsp_dma: dma-controller@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x1d000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078af000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp1_uart2: serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078b0000 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp1_spi1: spi@78b5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x078b5000 0x600>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ blsp1_i2c3: i2c@78b7000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x078b7000 0x600>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+ dmas = <&blsp_dma 9>, <&blsp_dma 8>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ qpic_bam: dma@7984000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07984000 0x1c000>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QPIC_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ status = "disabled";
+ };
+
+ qpic_nand: qpic-nand@79b0000 {
+ compatible = "qcom,ipq5018-snand", "qcom,ipq9574-snand";
+ reg = <0x079b0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&gcc GCC_QPIC_CLK>,
+ <&gcc GCC_QPIC_AHB_CLK>,
+ <&gcc GCC_QPIC_IO_MACRO_CLK>;
+ clock-names = "core", "aon", "iom";
+
+ dmas = <&qpic_bam 0>,
+ <&qpic_bam 1>,
+ <&qpic_bam 2>,
+ <&qpic_bam 3>;
+ dma-names = "tx", "rx", "cmd", "status";
+
+ status = "disabled";
+ };
+
+ usb: usb@8af8800 {
+ compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
+ reg = <0x08af8800 0x400>;
+
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq";
+
+ clocks = <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+ <&gcc GCC_USB0_SLEEP_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
+
+ resets = <&gcc GCC_USB0_BCR>;
+
+ qcom,select-utmi-as-pipe-clk;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ status = "disabled";
+
+ usb_dwc: usb@8a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x08a00000 0xe000>;
+ clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "ref";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ phy-names = "usb2-phy";
+ phys = <&usbphy0>;
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ reg = <0x0b000000 0x1000>, /* GICD */
+ <0x0b002000 0x2000>, /* GICC */
+ <0x0b001000 0x1000>, /* GICH */
+ <0x0b004000 0x2000>; /* GICV */
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0b00a000 0x1ffa>;
+
+ v2m0: v2m@0 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x00000000 0xff8>;
+ msi-controller;
+ };
+
+ v2m1: v2m@1000 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x00001000 0xff8>;
+ msi-controller;
+ };
+ };
+
+ watchdog: watchdog@b017000 {
+ compatible = "qcom,apss-wdt-ipq5018", "qcom,kpss-wdt";
+ reg = <0x0b017000 0x40>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&sleep_clk>;
+ };
+
+ apcs_glb: mailbox@b111000 {
+ compatible = "qcom,ipq5018-apcs-apps-global",
+ "qcom,ipq6018-apcs-apps-global";
+ reg = <0x0b111000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&a53pll>, <&xo_board_clk>, <&gcc GPLL0>;
+ clock-names = "pll", "xo", "gpll0";
+ #mbox-cells = <1>;
+ };
+
+ a53pll: clock@b116000 {
+ compatible = "qcom,ipq5018-a53pll";
+ reg = <0x0b116000 0x40>;
+ #clock-cells = <0>;
+ clocks = <&xo_board_clk>;
+ clock-names = "xo";
+ };
+
+ timer@b120000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0b120000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ frame@b120000 {
+ reg = <0x0b121000 0x1000>,
+ <0x0b122000 0x1000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <0>;
+ };
+
+ frame@b123000 {
+ reg = <0xb123000 0x1000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <1>;
+ status = "disabled";
+ };
+
+ frame@b124000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b124000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b125000 {
+ reg = <0x0b125000 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <3>;
+ status = "disabled";
+ };
+
+ frame@b126000 {
+ reg = <0x0b126000 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <4>;
+ status = "disabled";
+ };
+
+ frame@b127000 {
+ reg = <0x0b127000 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <5>;
+ status = "disabled";
+ };
+
+ frame@b128000 {
+ reg = <0x0b128000 0x1000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <6>;
+ status = "disabled";
+ };
+ };
+
+ wifi0: wifi@c000000 {
+ compatible = "qcom,ipq5018-wifi";
+ reg = <0xc000000 0x1000000>;
+
+ interrupts = <GIC_SPI 288 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 294 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 301 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 302 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 303 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 304 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 305 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 306 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 308 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 312 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 313 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 316 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 317 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 319 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 320 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 322 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 323 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 324 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 326 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 334 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 338 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "misc-pulse1",
+ "misc-latch",
+ "sw-exception",
+ "watchdog",
+ "ce0",
+ "ce1",
+ "ce2",
+ "ce3",
+ "ce4",
+ "ce5",
+ "ce6",
+ "ce7",
+ "ce8",
+ "ce9",
+ "ce10",
+ "ce11",
+ "host2wbm-desc-feed",
+ "host2reo-re-injection",
+ "host2reo-command",
+ "host2rxdma-monitor-ring3",
+ "host2rxdma-monitor-ring2",
+ "host2rxdma-monitor-ring1",
+ "reo2ost-exception",
+ "wbm2host-rx-release",
+ "reo2host-status",
+ "reo2host-destination-ring4",
+ "reo2host-destination-ring3",
+ "reo2host-destination-ring2",
+ "reo2host-destination-ring1",
+ "rxdma2host-monitor-destination-mac3",
+ "rxdma2host-monitor-destination-mac2",
+ "rxdma2host-monitor-destination-mac1",
+ "ppdu-end-interrupts-mac3",
+ "ppdu-end-interrupts-mac2",
+ "ppdu-end-interrupts-mac1",
+ "rxdma2host-monitor-status-ring-mac3",
+ "rxdma2host-monitor-status-ring-mac2",
+ "rxdma2host-monitor-status-ring-mac1",
+ "host2rxdma-host-buf-ring-mac3",
+ "host2rxdma-host-buf-ring-mac2",
+ "host2rxdma-host-buf-ring-mac1",
+ "rxdma2host-destination-ring-mac3",
+ "rxdma2host-destination-ring-mac2",
+ "rxdma2host-destination-ring-mac1",
+ "host2tcl-input-ring4",
+ "host2tcl-input-ring3",
+ "host2tcl-input-ring2",
+ "host2tcl-input-ring1",
+ "wbm2host-tx-completions-ring3",
+ "wbm2host-tx-completions-ring2",
+ "wbm2host-tx-completions-ring1",
+ "tcl2host-status-ring";
+
+ status = "disabled";
+ };
+
+ //QCN6102 5G
+ wifi1: wifi1@c000000 {
+ reg = <0x0b00a040 0x0>;
+ compatible = "qcom,qcn6122-wifi";
+ interrupts = <GIC_SPI 416 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 417 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 418 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 419 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 420 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 421 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 422 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 423 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 424 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 425 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ //QCN6122 5G/6G
+ wifi2: wifi2@c000000 {
+ reg = <0x0b00a040 0x0>;
+ compatible = "qcom,qcn6122-wifi";
+ interrupts = <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 450 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 453 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 454 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 455 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 456 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 457 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 458 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 459 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ q6v5_wcss: remoteproc@cd00000 {
+ compatible = "qcom,ipq5018-q6-mpd";
+ reg = <0x0cd00000 0x4040>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_XO_CLK>,
+ <&gcc GCC_SLEEP_CLK_SRC>,
+ <&gcc GCC_SYS_NOC_WCSS_AHB_CLK>;
+
+ interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 0 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 1 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 2 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 3 IRQ_TYPE_NONE>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ qcom,smem-states = <&wcss_smp2p_out 0>,
+ <&wcss_smp2p_out 1>;
+ qcom,smem-state-names = "shutdown",
+ "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+ label = "rtr";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 8>;
+
+ qrtr_requests {
+ qcom,glink-channels = "IPCRTR";
+ };
+ };
+ };
+
+ wcss: smp2p-wcss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 9>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ wcss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ qcom,smp2p-feature-ssr-ack;
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pcie1: pcie@80000000 {
+ compatible = "qcom,pcie-ipq5018";
+ reg = <0x80000000 0xf1d>,
+ <0x80000f20 0xa8>,
+ <0x80001000 0x1000>,
+ <0x00078000 0x3000>,
+ <0x80100000 0x1000>;
+ reg-names = "dbi",
+ "elbi",
+ "atu",
+ "parf",
+ "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ max-link-speed = <2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ phys = <&pcie1_phy>;
+ phy-names ="pciephy";
+
+ ranges = <0x81000000 0 0x80200000 0x80200000 0 0x00100000>, /* I/O */
+ <0x82000000 0 0x80300000 0x80300000 0 0x10000000>; /* MEM */
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global_irq";
+
+ clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
+ <&gcc GCC_PCIE1_AXI_M_CLK>,
+ <&gcc GCC_PCIE1_AXI_S_CLK>,
+ <&gcc GCC_PCIE1_AHB_CLK>,
+ <&gcc GCC_PCIE1_AUX_CLK>,
+ <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>;
+ clock-names = "iface",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "aux",
+ "axi_bridge";
+
+ resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+ <&gcc GCC_PCIE1_SLEEP_ARES>,
+ <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE1_AXI_MASTER_ARES>,
+ <&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
+ <&gcc GCC_PCIE1_AHB_ARES>,
+ <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>,
+ <&gcc GCC_PCIE1_AXI_SLAVE_STICKY_ARES>;
+ reset-names = "pipe",
+ "sleep",
+ "sticky",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "axi_m_sticky",
+ "axi_s_sticky";
+
+ msi-map = <0x0 &v2m0 0x0 0xff8>;
+ status = "disabled";
+ };
+
+ pcie0: pcie@a0000000 {
+ compatible = "qcom,pcie-ipq5018";
+ reg = <0xa0000000 0xf1d>,
+ <0xa0000f20 0xa8>,
+ <0xa0001000 0x1000>,
+ <0x00080000 0x3000>,
+ <0xa0100000 0x1000>;
+ reg-names = "dbi",
+ "elbi",
+ "atu",
+ "parf",
+ "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <2>;
+ max-link-speed = <2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ phys = <&pcie0_phy>;
+ phy-names ="pciephy";
+
+ ranges = <0x81000000 0 0xa0200000 0xa0200000 0 0x00100000>, /* I/O */
+ <0x82000000 0 0xa0300000 0xa0300000 0 0x10000000>; /* MEM */
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global_irq";
+
+ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+ <&gcc GCC_PCIE0_AXI_M_CLK>,
+ <&gcc GCC_PCIE0_AXI_S_CLK>,
+ <&gcc GCC_PCIE0_AHB_CLK>,
+ <&gcc GCC_PCIE0_AUX_CLK>,
+ <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>;
+ clock-names = "iface",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "aux",
+ "axi_bridge";
+
+ resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+ <&gcc GCC_PCIE0_SLEEP_ARES>,
+ <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+ <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+ <&gcc GCC_PCIE0_AHB_ARES>,
+ <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
+ reset-names = "pipe",
+ "sleep",
+ "sticky",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "axi_m_sticky",
+ "axi_s_sticky";
+
+ msi-map = <0x0 &v2m0 0x0 0xff8>;
+ status = "disabled";
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ cpu-critical {
+ temperature = <120000>;
+ hysteresis = <2>;
+ type = "critical";
+ };
+ };
+ };
+
+ gephy-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ gephy-critical {
+ temperature = <120000>;
+ hysteresis = <2>;
+ type = "critical";
+ };
+ };
+ };
+
+ top-glue-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ top_glue-critical {
+ temperature = <120000>;
+ hysteresis = <2>;
+ type = "critical";
+ };
+ };
+ };
+
+ ubi32-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ ubi32-critical {
+ temperature = <120000>;
+ hysteresis = <2>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
Reference in New Issue View Git Blame Copy Permalink