lede/target/linux/ramips/dts/mt7621_leigod_a7000.dts
aiamadeus 8d664879c5 ramips: mt7621: fixes gpio config
Fixes: 4561705 ("ramips: add support for OpenFi 5Pro")
2024-06-03 22:28:03 +08:00

144 lines
2.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "leigod,a7000", "mediatek,mt7621-soc";
model = "Leigod A7000";
aliases {
led-boot = &status_white;
led-failsafe = &status_red;
led-running = &status_orange;
led-upgrade = &status_white;
label-mac-device = &gmac0;
};
chosen {
bootargs = "console=ttyS0,115200";
};
leds {
compatible = "gpio-leds";
status_red: status_red {
label = "leigod:red:status";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
status_orange: status_orange {
label = "leigod:orange:status";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
status_white: status_white {
label = "leigod:white:status";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x1e00000>;
};
partition@1f00000 {
label = "sysinfo";
reg = <0x1f00000 0x10000>;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0>;
};
};
&gmac0 {
mtd-mac-address = <&factory 0x4>;
};
&gmac1 {
mtd-mac-address = <&factory 0x4>;
mtd-mac-address-increment = <1>;
status = "okay";
};
&gsw {
mediatek,portmap = "llllw";
status = "okay";
};
&hnat {
mtketh-wan = "eth1";
mtketh-ppd = "eth0";
mtketh-lan = "eth0";
mtketh-max-gmac = <2>;
/delete-property/ mtkdsa-wan-port;
};
&switch0 {
status = "disabled";
};
&state_default {
gpio {
groups = "jtag", "uart3", "wdt";
function = "gpio";
};
};