mirror of
https://github.com/coolsnowwolf/lede.git
synced 2025-04-16 14:23:38 +00:00
8061c8b8f9
* kernel: crypto: add atmel i2c hw accelerator support Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> * kernel: add led act/polarity select for rtl8221 phy Signed-off-by: Tianling Shen <cnsztl@gmail.com> * mediatek: add support for OpenEmbed SOM7981 Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 256 MiB SPI-NAND RAM: 0.5/1 GB DDR4 Ethernet: 1x 1GbE, 1x 2.5GbE (RTL8221B) WiFi: MediaTek MT7976C USB: 1x M.2 B-Key GPIO: 26-Pin header UART: 6 GND, 8 TX, 10 RX (in Pin header) Button: Reset Installation: The board comes with a third-party custom OpenWrt image, you can upload sysupgrade image via LuCI directly WITHOUT keeping configurations. Or power on the board with pressing reset button for 5 second, then visit http://192.168.1.1 and upload -factory.bin firmware. Signed-off-by: Tianling Shen <cnsztl@gmail.com> --------- Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> Signed-off-by: Tianling Shen <cnsztl@gmail.com>
48 lines
1.4 KiB
Plaintext
48 lines
1.4 KiB
Plaintext
. /lib/functions/leds.sh
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
board=$(board_name)
|
|
|
|
board_config_update
|
|
|
|
case $board in
|
|
abt,asr3000)
|
|
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
|
|
;;
|
|
bananapi,bpi-r4|\
|
|
bananapi,bpi-r4-poe)
|
|
ucidef_set_led_netdev "wan" "wan" "mt7530-0:00:green:lan" "wan" "link tx rx"
|
|
ucidef_set_led_netdev "lan1" "lan1" "mt7530-0:01:green:lan" "lan1" "link tx rx"
|
|
ucidef_set_led_netdev "lan2" "lan2" "mt7530-0:02:green:lan" "lan2" "link tx rx"
|
|
ucidef_set_led_netdev "lan3" "lan3" "mt7530-0:03:green:lan" "lan3" "link tx rx"
|
|
;;
|
|
hf,m7986r1*)
|
|
ucidef_set_led_netdev "led-1" "LAN1" "led-1" "lan1"
|
|
ucidef_set_led_netdev "led-2" "LAN2" "led-2" "lan2"
|
|
ucidef_set_led_netdev "led-3" "LAN3" "led-3" "lan3"
|
|
ucidef_set_led_netdev "led-4" "LAN4" "led-4" "lan4"
|
|
ucidef_set_led_netdev "led-5" "WWAN" "led-5" "usb0"
|
|
;;
|
|
imou,lc-hx3001|\
|
|
nokia,ea0326gmp)
|
|
ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan"
|
|
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
|
|
;;
|
|
openembed,som7981)
|
|
ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
|
|
ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
|
|
ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wlan2g" "wlan0"
|
|
ucidef_set_led_netdev "wlan5g" "WLAN5G" "red:wlan5g" "wlan1"
|
|
;;
|
|
xiaomi,mi-router-wr30u)
|
|
ucidef_set_led_netdev "wan" "wan" "blue:internet" "wan"
|
|
;;
|
|
xiaomi,redmi-router-ax6000)
|
|
ucidef_set_led_netdev "wan" "wan" "rgb:network" "wan"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|