lede/target/linux/ramips/dts/mt7620a_hiwifi_r33.dts

#include "mt7620a.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "hiwifi,r33", "ralink,mt7620a-soc";
	model = "HiWiFi R33";

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	aliases {
		led-boot = &led_system;
		led-failsafe = &led_system;
		led-running = &led_system;
		led-upgrade = &led_system;
	};

	nand {
		status = "okay";
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "mtk,mt7620-nand";

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0x80000>;
				read-only;
			};

			partition@80000 {
				label = "debug";
				reg = <0x80000 0x80000>;
				read-only;
			};

			factory: partition@100000 {
				label = "factory";
				reg = <0x100000 0x40000>;
				read-only;
			};

			partition@140000 {
				label = "kernel";
				reg = <0x140000 0x400000>;
			};

			ubiconcat0: partition@540000 {
				label = "ubiconcat0";
				reg = <0x540000 0x1c80000>;
			};

			bdinfo: partition@21c0000 {
				label = "bdinfo";
				reg = <0x21c0000 0x80000>;
				read-only;
			};

			ubiconcat1: partition@2240000 {
				label = "ubiconcat1";
				reg = <0x2240000 0x5dc0000>;
			};
		};
	};

	ubi-concat {
		compatible = "mtd-concat";
		devices = <&ubiconcat0 &ubiconcat1>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "ubi";
				reg = <0x0 0x7a40000>;
			};
		};
	};

	leds {
		compatible = "gpio-leds";

		wlan5g {
			label = "blue:wlan5g";
			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0tpt";
		};

		led_system: system {
			label = "blue:system";
			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
		};

		turbo {
			label = "blue:turbo";
			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "none";
		};

		wlan2g {
			label = "blue:wlan2g";
			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1tpt";
		};

		internet {
			label = "blue:internet";
			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
			linux,code = <KEY_RESTART>;
		};
	};

	gpio_export {
		compatible = "gpio-export";
		#size-cells = <0>;

		usbpower {
			gpio-export,name = "usbpower";
			gpio-export,output = <0>;
			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
		};
	};

	rtl8367rb {
		compatible = "realtek,rtl8367b", "rtl8367b";
		cpu_port = <6>;
		realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
		mii-bus = <&mdio0>;
	};
};

&gpio3 {
	status = "okay";
};

&ehci {
	status = "okay";
};

&ohci {
	status = "okay";
};

&pcie {
	status = "okay";
};

&gsw {
	mediatek,port4-gmac;
	mediatek,ephy-base = /bits/ 8 <12>;
};

&ethernet {
	pinctrl-names = "default";
	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;

	nvmem-cells = <&macaddr_bdinfo_18a>;
	nvmem-cell-names = "mac-address-ascii";

	port@5 {
		status = "okay";
		mediatek,fixed-link = <1000 1 1 1>;
		phy-handle = <&phy5>;
		phy-mode = "rgmii";
	};

	mdio0: mdio-bus {
		status = "okay";

		phy5: ethernet-phy@5 {
			reg = <5>;
			phy-mode = "rgmii";
		};
	};
};

&wmac {
	pinctrl-names = "default", "pa_gpio";
	pinctrl-0 = <&pa_pins>;
	pinctrl-1 = <&pa_gpio_pins>;
	ralink,mtd-eeprom = <&factory 0x0>;

	nvmem-cells = <&macaddr_bdinfo_18a>;
	nvmem-cell-names = "mac-address-ascii";
	mac-address-increment = <1>;
};

&pcie0 {
	wifi@0,0 {
		compatible = "pci14c3,7662";
		reg = <0x0000 0 0 0 0>;
		mediatek,mtd-eeprom = <&factory 0x8000>;
		ieee80211-freq-limit = <5000000 6000000>;

		nvmem-cells = <&macaddr_bdinfo_18a>;
		nvmem-cell-names = "mac-address-ascii";
		mac-address-increment = <2>;
	};
};

&state_default {
	gpio {
		groups = "uartf", "wled";
		function = "gpio";
	};
};

&bdinfo {
        compatible = "nvmem-cells";
        #address-cells = <1>;
        #size-cells = <1>;

        macaddr_bdinfo_18a: macaddr@18a {
                reg = <0x18a 0x11>;
        };
};