lede/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>

/ {
	aliases {
		led-boot = &led_sys;
		led-failsafe = &led_sys;
		led-running = &led_sys;
		led-upgrade = &led_sys;
		label-mac-device = &gmac0;
	};

	soc {
		rng@22000 {
			status = "okay";
		};

		mdio@90000 {
			status = "okay";
			pinctrl-0 = <&mdio_pins>;
			pinctrl-names = "default";
		};

		ess-psgmii@98000 {
			status = "okay";
		};

		tcsr@1949000 {
			compatible = "qcom,tcsr";
			reg = <0x1949000 0x100>;
			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
		};

		tcsr@194b000 {
			compatible = "qcom,tcsr";
			reg = <0x194b000 0x100>;
			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
		};

		ess_tcsr@1953000 {
			compatible = "qcom,tcsr";
			reg = <0x1953000 0x1000>;
			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
		};

		tcsr@1957000 {
			compatible = "qcom,tcsr";
			reg = <0x1957000 0x100>;
			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
		};

		usb2@60f8800 {
			status = "okay";
		};

		usb3@8af8800 {
			status = "okay";
		};

		crypto@8e3a000 {
			status = "okay";
		};

		watchdog@b017000 {
			status = "okay";
		};

		ess-switch@c000000 {
			status = "okay";
		};

		edma@c080000 {
			status = "okay";
		};
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-0 = <&led_pins>;
		pinctrl-names = "default";

		led_sys: sys {
			label = "r619ac:blue:sys";
			gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
		};

		wlan2g {
			label = "r619ac:blue:wlan2g";
			gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "phy0tpt";
		};

		wlan5g {
			label = "r619ac:blue:wlan5g";
			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "phy1tpt";
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};
};

&blsp_dma {
	status = "okay";
};

&blsp1_spi1 {
	status = "okay";

	flash@0 {
		reg = <0>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <24000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "SBL1";
				reg = <0x0 0x40000>;
				read-only;
			};

			partition@40000 {
				label = "MIBIB";
				reg = <0x40000 0x20000>;
				read-only;
			};

			partition@60000 {
				label = "QSEE";
				reg = <0x60000 0x60000>;
				read-only;
			};

			partition@c0000 {
				label = "CDT";
				reg = <0xc0000 0x10000>;
				read-only;
			};

			partition@d0000 {
				label = "DDRPARAMS";
				reg = <0xd0000 0x10000>;
				read-only;
			};

			partition@e0000 {
				label = "APPSBLENV";
				reg = <0xe0000 0x10000>;
				read-only;
			};

			partition@f0000 {
				label = "APPSBL";
				reg = <0xf0000 0x80000>;
				read-only;
			};

			partition@1 {
				label = "Bootloader";
				reg = <0x0 0x170000>;
				read-only;
			};

			partition@170000 {
				label = "ART";
				reg = <0x170000 0x10000>;
				read-only;
			};

			partition@180000 {
				label = "unused";
				reg = <0x180000 0xe80000>;
			};
		};
	};
};

&blsp1_uart1 {
	pinctrl-0 = <&serial_0_pins>;
	pinctrl-names = "default";
	status = "okay";
};

&cryptobam {
	status = "okay";
};

&nand {
	status = "okay";

	nand@0 {
		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			rootfs_part1: partition@0 {
				label = "rootfs";
				reg = <0x0 0x4000000>;
			};

			rootfs_part2: partition@4000000 {
				label = "unused1";
				reg = <0x4000000 0x4000000>;
			};
		};
	};
};

&qpic_bam {
	status = "okay";
};

&sdhci {
	pinctrl-0 = <&sd_0_pins>;
	pinctrl-names = "default";
	vqmmc-supply = <&vqmmc>;
	status = "okay";
};

&tlmm {
	mdio_pins: mdio_pinmux {
		mux_1 {
			pins = "gpio6";
			function = "mdio";
			bias-pull-up;
		};

		mux_2 {
			pins = "gpio7";
			function = "mdc";
			bias-pull-up;
		};
	};

	sd_0_pins: sd_0_pinmux {
		mux_1 {
			pins = "gpio23", "gpio24", "gpio25", "gpio26", "gpio28";
			function = "sdio";
			drive-strength = <10>;
		};

		mux_2 {
			pins = "gpio27";
			function = "sdio";
			drive-strength = <16>;
		};
	};

	serial_0_pins: serial0-pinmux {
		mux {
			pins = "gpio16", "gpio17";
			function = "blsp_uart0";
			bias-disable;
		};
	};

	led_pins: led_pinmux {
		mux {
			pins = "gpio32", "gpio39", "gpio50";
			function = "gpio";
			bias-pull-up;
			output-low;
		};

		mux_1 {
			pins = "gpio52";
			function = "gpio";
			bias-pull-up;
			output-high;
		};

		mux_2 {
			pins = "gpio61";
			function = "gpio";
			bias-pull-down;
			output-high;
		};
	};
};

&usb3_ss_phy {
	status = "okay";
};

&usb3_hs_phy {
	status = "okay";
};

&usb2_hs_phy {
	status = "okay";
};

&vqmmc {
	status = "okay";
};

&wifi0 {
	status = "okay";
	qcom,ath10k-calibration-variant = "R619AC";
};

&wifi1 {
	status = "okay";
	qcom,ath10k-calibration-variant = "R619AC";
};