// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca955x.dtsi"

/ {
	model = "Arris SBR-AC1750";
	compatible = "arris,sbr-ac1750", "qca,qca9557";

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	aliases {
		led-boot = &led_wps;
		led-failsafe = &led_wps;
		led-upgrade = &led_wps;
		label-mac-device = &eth0;
	};

	leds {
		compatible = "gpio-leds";

		wlan2g {
			label = "arris:green:wlan2g";
			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1tpt";
		};

		wlan5g {
			label = "arris:green:wlan5g";
			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0tpt";
		};

		usb {
			label = "arris:green:usb";
			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
			trigger-sources = <&hub_port0>, <&hub_port1>;
			linux,default-trigger = "usbport";
		};

		led_wps: wps {
			label = "arris:green:wps";
			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
		};

		wps {
			linux,code = <KEY_WPS_BUTTON>;
			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
		};
	};

	watchdog {
		compatible = "linux,wdt-gpio";
		gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
		hw_algo = "toggle";
		hw_margin_ms = <1600>;
		always-running;
	};
};

&pcie0 {
	status = "okay";
};

&uart {
	status = "okay";
};

&gpio {
	status = "okay";
};

&usb_phy0 {
	status = "okay";
};

&usb0 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	hub_port0: port@1 {
		reg = <1>;
		#trigger-source-cells = <0>;
	};
};

&usb_phy1 {
	status = "okay";
};

&usb1 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	hub_port1: port@1 {
		reg = <1>;
		#trigger-source-cells = <0>;
	};
};

&nand {
	status = "okay";

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "u-boot";
			reg = <0x000000 0x100000>;
			read-only;
		};

		partition@100000 {
			label = "boot-flag";
			reg = <0x100000 0x100000>;
		};

		partition@200000 {
			label = "kernel";
			reg = <0x200000 0x400000>;
		};

		partition@600000 {
			label = "ubi";
			reg = <0x600000 0x6400000>;
		};

		ft: partition@6a00000 {
			label = "ft";
			reg = <0x6a00000 0x100000>;
			read-only;
		};

		partition@6b00000 {
			label = "PKI";
			reg = <0x6b00000 0x200000>;
			read-only;
		};

		caldata: partition@6d00000 {
			label = "caldata";
			reg = <0x6d00000 0x100000>;
			read-only;
		};
	};
};

&mdio0 {
	status = "okay";

	phy0: ethernet-phy@0 {
		reg = <0>;

		qca,ar8327-initvals = <
			0x04 0x87600000 /* PORT0 PAD MODE CTRL */
			0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
			0x7c 0x0000007e /* PORT0 STATUS */
			0x94 0x0000007e /* PORT6 STATUS */
			>;
	};
};

&eth0 {
	status = "okay";

	mtd-mac-address = <&ft 0x0>;
	nvmem-cells = <&macaddr_ft_0>;
	nvmem-cell-names = "mac-address";
	pll-data = <0x56000000 0x00000101 0x00001616>;
	phy-handle = <&phy0>;
};

&eth1 {
	status = "okay";

	mtd-mac-address = <&ft 0x6>;
	nvmem-cells = <&macaddr_ft_6>;
	nvmem-cell-names = "mac-address";
	pll-data = <0x03000101 0x00000101 0x00001616>;
	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&wmac {
	status = "okay";

	mtd-cal-data = <&caldata 0x1000>;
	mtd-mac-address = <&ft 0xc>;
	nvmem-cells = <&macaddr_ft_c>;
	nvmem-cell-names = "mac-address";
};

&ft {
	compatible = "nvmem-cells";
	#address-cells = <1>;
	#size-cells = <1>;

	macaddr_ft_0: macaddr@0 {
		reg = <0x0 0x6>;
	};

	macaddr_ft_6: macaddr@6 {
		reg = <0x6 0x6>;
	};

	macaddr_ft_c: macaddr@c {
		reg = <0xc 0x6>;
	};
};