--- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -0,0 +1,1125 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * IPQ5018 SoC device tree source + * + * Copyright (c) 2023 The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + cmn_pll_ref_clk: cmn-pll-ref-clk { + compatible = "fixed-clock"; + clock-frequency = <96000000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-unified; + }; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + /* + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <200000>; + }; + */ + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <200000>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-ipq5018", "qcom,scm"; + qcom,sdi-enabled; + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_apps@4a400000 { + reg = <0x0 0x4a400000 0x0 0x400000>; + no-map; + }; + + bootloader@4a800000 { + reg = <0x0 0x4a800000 0x0 0x200000>; + no-map; + }; + + sbl@4aa00000 { + reg = <0x0 0x4aa00000 0x0 0x100000>; + no-map; + }; + + smem@4ab00000 { + compatible = "qcom,smem"; + reg = <0x0 0x4ab00000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + }; + + tz_region: tz@4ac00000 { + reg = <0x0 0x4ac00000 0x0 0x200000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + usbphy0: phy@5b000 { + compatible = "qcom,ipq5018-usb-hsphy"; + reg = <0x0005b000 0x120>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie1_phy: phy@7e000{ + compatible = "qcom,ipq5018-uniphy-pcie-phy"; + reg = <0x0007e000 0x800>; + + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; + + resets = <&gcc GCC_PCIE1_PHY_BCR>, + <&gcc GCC_PCIE1PHY_PHY_BCR>; + + #clock-cells = <0>; + + #phy-cells = <0>; + + num-lanes = <1>; + + status = "disabled"; + }; + + pcie0_phy: phy@86000{ + compatible = "qcom,ipq5018-uniphy-pcie-phy"; + reg = <0x00086000 0x800>; + + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + + #clock-cells = <0>; + + #phy-cells = <0>; + + num-lanes = <2>; + + status = "disabled"; + }; + + mdio0: mdio@88000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,ipq5018-mdio", "qcom,qca-mdio"; + reg = <0x88000 0x64>; + clocks = <&gcc GCC_MDIO0_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + status = "disabled"; + + ge_phy: ethernet-phy@7 { + compatible = "ethernet-phy-id004d.d0c0"; + reg = <7>; + resets = <&gcc GCC_GEPHY_BCR>, + <&gcc GCC_GEPHY_MDC_SW_ARES>, + <&gcc GCC_GEPHY_DSP_HW_ARES>, + <&gcc GCC_GEPHY_RX_ARES>, + <&gcc GCC_GEPHY_TX_ARES>; + clocks = <&gcc GCC_GEPHY_RX_CLK>, + <&gcc GCC_GEPHY_TX_CLK>; + }; + }; + + mdio1: mdio@90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,ipq5018-mdio"; + reg = <0x90000 0x64>; + clocks = <&gcc GCC_MDIO1_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + status = "disabled"; + }; + + cmn_pll: clock-controller@9b000 { + compatible = "qcom,ipq9574-cmn-pll"; + reg = <0x0009b000 0x800>, + <0x19475c4 0x4>; + reg-names = "cmn", + "tcsr"; + clocks = <&cmn_pll_ref_clk>, + <&gcc GCC_CMN_BLK_AHB_CLK>, + <&gcc GCC_CMN_BLK_SYS_CLK>; + clock-names = "ref", "ahb", "sys"; + #clock-cells = <1>; + }; + + qfprom: qfprom@a0000 { + compatible = "qcom,ipq5018-qfprom", "qcom,qfprom"; + reg = <0xa0000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_mode: mode@249 { + reg = <0x249 1>; + bits = <0 3>; + }; + + tsens_base1: base1@249 { + reg = <0x249 2>; + bits = <3 8>; + }; + + tsens_base2: base2@24a { + reg = <0x24a 2>; + bits = <3 8>; + }; + + tsens_s0_p1: s0-p1@24b { + reg = <0x24b 0x2>; + bits = <2 6>; + }; + + tsens_s0_p2: s0-p2@24c { + reg = <0x24c 0x1>; + bits = <1 6>; + }; + + tsens_s1_p1: s1-p1@24c { + reg = <0x24c 0x2>; + bits = <7 6>; + }; + + tsens_s1_p2: s1-p2@24d { + reg = <0x24d 0x2>; + bits = <5 6>; + }; + + tsens_s2_p1: s2-p1@24e { + reg = <0x24e 0x2>; + bits = <3 6>; + }; + + tsens_s2_p2: s2-p2@24f { + reg = <0x24f 0x1>; + bits = <1 6>; + }; + + tsens_s3_p1: s3-p1@24f { + reg = <0x24f 0x2>; + bits = <7 6>; + }; + + tsens_s3_p2: s3-p2@250 { + reg = <0x250 0x2>; + bits = <5 6>; + }; + + tsens_s4_p1: s4-p1@251 { + reg = <0x251 0x2>; + bits = <3 6>; + }; + + tsens_s4_p2: s4-p2@254 { + reg = <0x254 0x1>; + bits = <0 6>; + }; + }; + + prng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + status = "disabled"; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq5018-tsens"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ + + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, + <&tsens_base2>, + <&tsens_s0_p1>, + <&tsens_s0_p2>, + <&tsens_s1_p1>, + <&tsens_s1_p2>, + <&tsens_s2_p1>, + <&tsens_s2_p2>, + <&tsens_s3_p1>, + <&tsens_s3_p2>, + <&tsens_s4_p1>, + <&tsens_s4_p2>; + + nvmem-cell-names = "mode", + "base1", + "base2", + "s0_p1", + "s0_p2", + "s1_p1", + "s1_p2", + "s2_p1", + "s2_p2", + "s3_p1", + "s3_p2", + "s4_p1", + "s4_p2"; + + interrupts = ; + interrupt-names = "uplow"; + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; + }; + + cryptobam: dma-controller@704000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; + interrupts = ; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,controlled-remotely; + status = "disabled"; + }; + + crypto: crypto@73a000 { + compatible = "qcom,crypto-v5.1"; + reg = <0x0073a000 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5018-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 47>; + interrupt-controller; + #interrupt-cells = <2>; + + uart1_pins: uart1-state { + pins = "gpio31", "gpio32", "gpio33", "gpio34"; + function = "blsp1_uart1"; + drive-strength = <8>; + bias-pull-down; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-ipq5018"; + reg = <0x01800000 0x80000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&pcie0_phy>, + <&pcie1_phy>, + <0>, + <&ge_phy 0>, + <&ge_phy 1>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq5018", "syscon", "simple-mfd"; + reg = <0x01937000 0x21000>; + }; + + pwm: pwm@1941010 { + compatible = "qcom,ipq5018-pwm", "qcom,ipq6018-pwm"; + reg = <0x01941010 0x20>; + clocks = <&gcc GCC_ADSS_PWM_CLK>; + assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>; + assigned-clock-rates = <100000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + + sdhc_1: mmc@7804000 { + compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x7804000 0x1000>; + reg-names = "hc"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board_clk>; + clock-names = "iface", "core", "xo"; + non-removable; + status = "disabled"; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1d000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078b5000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078b7000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp_dma 9>, <&blsp_dma 8>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + qpic_bam: dma@7984000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07984000 0x1c000>; + interrupts = ; + clocks = <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + qpic_nand: qpic-nand@79b0000 { + compatible = "qcom,ipq5018-snand", "qcom,ipq9574-snand"; + reg = <0x079b0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>, + <&gcc GCC_QPIC_IO_MACRO_CLK>; + clock-names = "core", "aon", "iom"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>, + <&qpic_bam 3>; + dma-names = "tx", "rx", "cmd", "status"; + + status = "disabled"; + }; + + usb: usb@8af8800 { + compatible = "qcom,ipq5018-dwc3", "qcom,dwc3"; + reg = <0x08af8800 0x400>; + + interrupts = ; + interrupt-names = "hs_phy_irq"; + + clocks = <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "core", + "iface", + "sleep", + "mock_utmi"; + + resets = <&gcc GCC_USB0_BCR>; + + qcom,select-utmi-as-pipe-clk; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + usb_dwc: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x08a00000 0xe000>; + clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "ref"; + interrupts = ; + phy-names = "usb2-phy"; + phys = <&usbphy0>; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x2000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x2000>; /* GICV */ + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0b00a000 0x1ffa>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00000000 0xff8>; + msi-controller; + }; + + v2m1: v2m@1000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00001000 0xff8>; + msi-controller; + }; + }; + + watchdog: watchdog@b017000 { + compatible = "qcom,apss-wdt-ipq5018", "qcom,kpss-wdt"; + reg = <0x0b017000 0x40>; + interrupts = ; + clocks = <&sleep_clk>; + }; + + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq5018-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + clocks = <&a53pll>, <&xo_board_clk>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; + #mbox-cells = <1>; + }; + + a53pll: clock@b116000 { + compatible = "qcom,ipq5018-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board_clk>; + clock-names = "xo"; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b120000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + interrupts = , + ; + frame-number = <0>; + }; + + frame@b123000 { + reg = <0xb123000 0x1000>; + interrupts = ; + frame-number = <1>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = ; + reg = <0x0b124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + interrupts = ; + frame-number = <3>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + interrupts = ; + frame-number = <4>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + interrupts = ; + frame-number = <5>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + interrupts = ; + frame-number = <6>; + status = "disabled"; + }; + }; + + wifi0: wifi@c000000 { + compatible = "qcom,ipq5018-wifi"; + reg = <0xc000000 0x1000000>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + + interrupt-names = "misc-pulse1", + "misc-latch", + "sw-exception", + "watchdog", + "ce0", + "ce1", + "ce2", + "ce3", + "ce4", + "ce5", + "ce6", + "ce7", + "ce8", + "ce9", + "ce10", + "ce11", + "host2wbm-desc-feed", + "host2reo-re-injection", + "host2reo-command", + "host2rxdma-monitor-ring3", + "host2rxdma-monitor-ring2", + "host2rxdma-monitor-ring1", + "reo2ost-exception", + "wbm2host-rx-release", + "reo2host-status", + "reo2host-destination-ring4", + "reo2host-destination-ring3", + "reo2host-destination-ring2", + "reo2host-destination-ring1", + "rxdma2host-monitor-destination-mac3", + "rxdma2host-monitor-destination-mac2", + "rxdma2host-monitor-destination-mac1", + "ppdu-end-interrupts-mac3", + "ppdu-end-interrupts-mac2", + "ppdu-end-interrupts-mac1", + "rxdma2host-monitor-status-ring-mac3", + "rxdma2host-monitor-status-ring-mac2", + "rxdma2host-monitor-status-ring-mac1", + "host2rxdma-host-buf-ring-mac3", + "host2rxdma-host-buf-ring-mac2", + "host2rxdma-host-buf-ring-mac1", + "rxdma2host-destination-ring-mac3", + "rxdma2host-destination-ring-mac2", + "rxdma2host-destination-ring-mac1", + "host2tcl-input-ring4", + "host2tcl-input-ring3", + "host2tcl-input-ring2", + "host2tcl-input-ring1", + "wbm2host-tx-completions-ring3", + "wbm2host-tx-completions-ring2", + "wbm2host-tx-completions-ring1", + "tcl2host-status-ring"; + + status = "disabled"; + }; + + //QCN6102 5G + wifi1: wifi1@c000000 { + reg = <0x0b00a040 0x0>; + compatible = "qcom,qcn6122-wifi"; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + status = "disabled"; + }; + + //QCN6122 5G/6G + wifi2: wifi2@c000000 { + reg = <0x0b00a040 0x0>; + compatible = "qcom,qcn6122-wifi"; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + status = "disabled"; + }; + + q6v5_wcss: remoteproc@cd00000 { + compatible = "qcom,ipq5018-q6-mpd"; + reg = <0x0cd00000 0x4040>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_XO_CLK>, + <&gcc GCC_SLEEP_CLK_SRC>, + <&gcc GCC_SYS_NOC_WCSS_AHB_CLK>; + + interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 0 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 1 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 2 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 3 IRQ_TYPE_NONE>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + qcom,smem-states = <&wcss_smp2p_out 0>, + <&wcss_smp2p_out 1>; + qcom,smem-state-names = "shutdown", + "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "rtr"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 8>; + + qrtr_requests { + qcom,glink-channels = "IPCRTR"; + }; + }; + }; + + wcss: smp2p-wcss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = ; + + mboxes = <&apcs_glb 9>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + wcss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + qcom,smp2p-feature-ssr-ack; + #qcom,smem-state-cells = <1>; + }; + + wcss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pcie1: pcie@80000000 { + compatible = "qcom,pcie-ipq5018"; + reg = <0x80000000 0xf1d>, + <0x80000f20 0xa8>, + <0x80001000 0x1000>, + <0x00078000 0x3000>, + <0x80100000 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + max-link-speed = <2>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie1_phy>; + phy-names ="pciephy"; + + ranges = <0x81000000 0 0x80200000 0x80200000 0 0x00100000>, /* I/O */ + <0x82000000 0 0x80300000 0x80300000 0 0x10000000>; /* MEM */ + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interrupts = ; + interrupt-names = "global_irq"; + + clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, + <&gcc GCC_PCIE1_AXI_M_CLK>, + <&gcc GCC_PCIE1_AXI_S_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_AUX_CLK>, + <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "ahb", + "aux", + "axi_bridge"; + + resets = <&gcc GCC_PCIE1_PIPE_ARES>, + <&gcc GCC_PCIE1_SLEEP_ARES>, + <&gcc GCC_PCIE1_CORE_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_ARES>, + <&gcc GCC_PCIE1_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE1_AHB_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky", + "axi_s_sticky"; + + msi-map = <0x0 &v2m0 0x0 0xff8>; + status = "disabled"; + }; + + pcie0: pcie@a0000000 { + compatible = "qcom,pcie-ipq5018"; + reg = <0xa0000000 0xf1d>, + <0xa0000f20 0xa8>, + <0xa0001000 0x1000>, + <0x00080000 0x3000>, + <0xa0100000 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + max-link-speed = <2>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie0_phy>; + phy-names ="pciephy"; + + ranges = <0x81000000 0 0xa0200000 0xa0200000 0 0x00100000>, /* I/O */ + <0x82000000 0 0xa0300000 0xa0300000 0 0x10000000>; /* MEM */ + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interrupts = ; + interrupt-names = "global_irq"; + + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "ahb", + "aux", + "axi_bridge"; + + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky", + "axi_s_sticky"; + + msi-map = <0x0 &v2m0 0x0 0xff8>; + status = "disabled"; + }; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 2>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <2>; + type = "critical"; + }; + }; + }; + + gephy-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 4>; + + trips { + gephy-critical { + temperature = <120000>; + hysteresis = <2>; + type = "critical"; + }; + }; + }; + + top-glue-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 3>; + + trips { + top_glue-critical { + temperature = <120000>; + hysteresis = <2>; + type = "critical"; + }; + }; + }; + + ubi32-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 1>; + + trips { + ubi32-critical { + temperature = <120000>; + hysteresis = <2>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +};