/* * Copyright (c) 2019 Hugo Yuan */ #include "qcom-ipq4019.dtsi" #include #include #include / { model = "Hugo AC1200"; compatible = "hugo,ac1200", "qcom,ipq4019"; memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256MB */ }; aliases { led-boot = &power; led-failsafe = &power; led-running = &power; led-upgrade = &power; }; soc { mdio@90000 { status = "okay"; pinctrl-0 = <&mdio_pins>; pinctrl-names = "default"; }; ess-psgmii@98000 { status = "okay"; }; tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; qcom,wifi_glb_cfg = ; }; tcsr@194b000 { /* select hostmode */ compatible = "qcom,tcsr"; reg = <0x194b000 0x100>; qcom,usb-hsphy-mode-select = ; status = "okay"; }; ess_tcsr@1953000 { compatible = "qcom,tcsr"; reg = <0x1953000 0x1000>; qcom,ess-interface-select = ; }; tcsr@1957000 { compatible = "qcom,tcsr"; reg = <0x1957000 0x100>; qcom,wifi_noc_memtype_m0_m2 = ; }; usb2@60f8800 { status = "okay"; dwc3@6000000 { #address-cells = <1>; #size-cells = <0>; usb2_port1: port@1 { reg = <1>; #trigger-source-cells = <0>; }; }; }; serial@78af000 { pinctrl-0 = <&serial_0_pins>; pinctrl-names = "default"; status = "okay"; }; serial@78b0000 { pinctrl-0 = <&serial_1_pins>; pinctrl-names = "default"; status = "okay"; }; i2c@78b7000 { /* BLSP1 QUP2 */ pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; status = "okay"; }; usb3: usb3@8af8800 { status = "okay"; dwc3@8a00000 { #address-cells = <1>; #size-cells = <0>; usb3_port1: port@1 { reg = <1>; #trigger-source-cells = <0>; }; usb3_port2: port@2 { reg = <2>; #trigger-source-cells = <0>; }; }; }; crypto@8e3a000 { status = "okay"; }; watchdog@b017000 { status = "okay"; }; ess-switch@c000000 { status = "okay"; }; edma@c080000 { status = "okay"; }; leds { compatible = "gpio-leds"; led1 { label = "green:ctrl1"; gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; }; led2 { label = "red:ctrl2"; gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; }; power: led3 { label = "blue:ctrl3"; gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; }; &blsp_dma { status = "okay"; }; &blsp1_spi1 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; flash@0 { reg = <0>; compatible = "jedec,spi-nor"; spi-max-frequency = <24000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "0:SBL1"; reg = <0x0 0x40000>; read-only; }; partition@40000 { label = "0:MIBIB"; reg = <0x40000 0x20000>; read-only; }; partition@60000 { label = "0:QSEE"; reg = <0x60000 0x60000>; read-only; }; partition@c0000 { label = "0:CDT"; reg = <0xc0000 0x10000>; read-only; }; partition@d0000 { label = "0:DDRPARAMS"; reg = <0xd0000 0x10000>; read-only; }; partition@e0000 { label = "0:APPSBLENV"; reg = <0xe0000 0x10000>; read-only; }; partition@f0000 { label = "0:APPSBL"; reg = <0xf0000 0x80000>; read-only; }; partition@170000 { label = "0:ART"; reg = <0x170000 0x10000>; read-only; }; partition@180000 { compatible = "denx,fit"; label = "firmware"; reg = <0x180000 0x1e80000>; }; }; }; }; &cryptobam { status = "okay"; }; &qpic_bam { status = "okay"; }; &tlmm { i2c_0_pins: i2c-0-pinmux { mux { pins = "gpio20", "gpio21"; function = "blsp_i2c0"; bias-disable; }; }; mdio_pins: mdio_pinmux { mux_1 { pins = "gpio6"; function = "mdio"; bias-pull-up; }; mux_2 { pins = "gpio7"; function = "mdc"; bias-pull-up; }; }; serial_0_pins: serial0-pinmux { mux { pins = "gpio16", "gpio17"; function = "blsp_uart0"; bias-disable; }; }; serial_1_pins: serial1_pinmux { mux { pins = "gpio8", "gpio9"; function = "blsp_uart1"; bias-disable; }; }; spi_0_pins: spi_0_pinmux { pinmux { function = "blsp_spi0"; pins = "gpio13", "gpio14", "gpio15"; drive-strength = <12>; bias-disable; }; pinmux_cs { function = "gpio"; pins = "gpio12"; drive-strength = <2>; bias-disable; output-high; }; }; }; &usb3_ss_phy { status = "okay"; }; &usb3_hs_phy { status = "okay"; }; &usb2_hs_phy { status = "okay"; }; &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "hugo_ac1200"; }; &wifi1 { status = "okay"; qcom,ath10k-calibration-variant = "hugo_ac1200"; };