#include "qcom-ipq8064-v1.0.dtsi"

#include <dt-bindings/input/input.h>

/ {
	model = "Buffalo WXR-2533DHP";
	compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";

	memory@0 {
		reg = <0x42000000 0x1e000000>;
		device_type = "memory";
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		rsvd@41200000 {
			reg = <0x41200000 0x300000>;
			no-map;
		};
	};

	aliases {
		serial0 = &uart4;
		mdio-gpio0 = &mdio0;

		led-boot = &power_white;
		led-failsafe = &power_orange;
		led-running = &power_white;
		led-upgrade = &power_orange;
	};

	chosen {
		bootargs = "console=ttyMSM0,115200n8 ubi.mtd=0 ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
		linux,stdout-path = "serial0:115200n8";
	};

	soc {
		pinmux@800000 {
			i2c4_pins: i2c4_pinmux {
				mux {
					pins = "gpio12", "gpio13";
					function = "gsbi4";
					drive-strength = <12>;
					bias-disable;
				};
			};

			spi_pins: spi_pins {
				mux {
					pins = "gpio18", "gpio19", "gpio21";
					function = "gsbi5";
					drive-strength = <10>;
					bias-none;
				};
			};

			nand_pins: nand_pins {
				mux {
					pins = "gpio34", "gpio35", "gpio36",
					       "gpio37", "gpio38", "gpio39",
					       "gpio40", "gpio41", "gpio42",
					       "gpio43", "gpio44", "gpio45",
					       "gpio46", "gpio47";
					function = "nand";
					drive-strength = <10>;
					bias-disable;
				};
				pullups {
					pins = "gpio39";
					bias-pull-up;
				};
				hold {
					pins = "gpio40", "gpio41", "gpio42",
					       "gpio43", "gpio44", "gpio45",
					       "gpio46", "gpio47";
					bias-bus-hold;
				};
			};

			mdio0_pins: mdio0_pins {
				mux {
					pins = "gpio0", "gpio1";
					function = "gpio";
					drive-strength = <8>;
					bias-disable;
				};
			};

			rgmii2_pins: rgmii2_pins {
				mux {
					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
					function = "rgmii2";
					drive-strength = <8>;
					bias-disable;
				};
			};

			led_pins: led_pins {
				mux {
					pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22", "gpio23", 
						"gpio24", "gpio25", "gpio26", "gpio53";
					function = "gpio";
					drive-strength = <2>;
					bias-pull-up;
				};
			};

			button_pins: button_pins {
				mux {
					pins = "gpio54", "gpio65";
					function = "gpio";
					drive-strength = <2>;
					bias-pull-up;
				};
			};

		};

		nand@1ac00000 {
			status = "ok";

			pinctrl-0 = <&nand_pins>;
			pinctrl-names = "default";

			cs0 {
				reg = <0>;
				compatible = "qcom,nandcs";

				nand-ecc-strength = <4>;
				nand-bus-width = <8>;
				nand-ecc-step-size = <512>;

				partitions {
					compatible = "fixed-partitions";
					#address-cells = <1>;
					#size-cells = <1>;

					rootfs@0000000 {
						label = "rootfs";
						reg = <0x0000000 0x4000000>;
					};

					rootfs_1@4000000 {
						label = "rootfs_1";
						reg = <0x4000000 0x4000000>;
					};
				};
			};
		};

		gsbi@16300000 {
			qcom,mode = <GSBI_PROT_I2C_UART>;
			status = "ok";
			
			uart4: serial@16340000 {
				status = "ok";
			};
			/*
			 * The i2c device on gsbi4 should not be enabled.
			 * On ipq806x designs gsbi4 i2c is meant for exclusive
			 * RPM usage. Turning this on in kernel manifests as
			 * i2c failure for the RPM.
			 */
		};

		gsbi5: gsbi@1a200000 {
			qcom,mode = <GSBI_PROT_SPI>;
			status = "ok";

			spi5: spi@1a280000 {
				status = "ok";

				pinctrl-0 = <&spi_pins>;
				pinctrl-names = "default";

				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;

				flash: m25p80@0 {
					compatible = "jedec,spi-nor";
					#address-cells = <1>;
					#size-cells = <1>;
					spi-max-frequency = <50000000>;
					reg = <0>;

					SBL1@0 {
						label = "SBL1";
						reg = <0x0 0x10000>;
						read-only;
					};

					MIBIB@10000 {
						label = "MIBIB";
						reg = <0x10000 0x20000>;
						read-only;
					};

					SBL2@30000 {
						label = "SBL2";
						reg = <0x30000 0x30000>;
						read-only;
					};

					SBL3@60000 {
						label = "SBL3";
						reg = <0x60000 0x30000>;
						read-only;
					};

					DDRCONFIG@90000 {
						label = "DDRCONFIG";
						reg = <0x90000 0x10000>;
						read-only;
					};

					SSD@a0000 {
						label = "SSD";
						reg = <0xa0000 0x10000>;
						read-only;
					};

					TZ@b0000 {
						label = "TZ";
						reg = <0xb0000 0x30000>;
						read-only;
					};

					RPM@e0000 {
						label = "RPM";
						reg = <0xe0000 0x20000>;
						read-only;
					};

					APPSBL@100000 {
						label = "APPSBL";
						reg = <0x100000 0x70000>;
						read-only;
					};

					APPSBLENV@170000 {
						label = "APPSBLENV";
						reg = <0x170000 0x10000>;
						read-only;
					};

					ART: ART@180000 {
						label = "ART";
						reg = <0x180000 0x40000>;
						read-only;
					};

					BOOTCONFIG@1c0000 {
						label = "OLDART";
						reg = <0x1c0000 0x10000>;
						read-only;
					};

					APPSBL_1@1d0000 {
						label = "APPSBL_1";
						reg = <0x1d0000 0x70000>;
					};
				};
			};
		};

		phy@100f8800 {		/* USB3 port 1 HS phy */
			status = "ok";
		};

		phy@100f8830 {		/* USB3 port 1 SS phy */
			status = "ok";
		};

		phy@110f8800 {		/* USB3 port 0 HS phy */
			status = "ok";
		};

		phy@110f8830 {		/* USB3 port 0 SS phy */
			status = "ok";
		};

		usb30@0 {
			status = "ok";
		};

		usb30@1 {
			status = "ok";
		};

		pcie0: pci@1b500000 {
			status = "ok";
			phy-tx0-term-offset = <7>;
		};

		pcie1: pci@1b700000 {
			status = "ok";
			phy-tx0-term-offset = <7>;
		};

		mdio0: mdio {
			compatible = "virtual,mdio-gpio";
			#address-cells = <1>;
			#size-cells = <0>;
			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
			pinctrl-0 = <&mdio0_pins>;
			pinctrl-names = "default";

			phy0: ethernet-phy@0 {
				device_type = "ethernet-phy";
				reg = <0>;
				qca,ar8327-initvals = <
					0x00004 0x7600000   /* PAD0_MODE */
					0x00008 0x1000000   /* PAD5_MODE */
					0x0000c 0x80        /* PAD6_MODE */
					0x000e4 0x6a545     /* MAC_POWER_SEL */
					0x000e0 0xc74164de  /* SGMII_CTRL */
					0x0007c 0x4e        /* PORT0_STATUS */
					0x00094 0x4e        /* PORT6_STATUS */
					>;
			};

			phy4: ethernet-phy@4 {
				device_type = "ethernet-phy";
				reg = <4>;
			};
		};

		gmac1: ethernet@37200000 {
			status = "ok";
			phy-mode = "rgmii";
			qcom,id = <1>;
			qcom,phy_mdio_addr = <4>;
			qcom,poll_required = <1>;
			qcom,rgmii_delay = <0>;
			qcom,emulation = <0>;
			pinctrl-0 = <&rgmii2_pins>;
			pinctrl-names = "default";
			mtd-mac-address = <&ART 6>;
			fixed-link {
				speed = <1000>;
				full-duplex;
			};
		};
		//lan
		gmac2: ethernet@37400000 {
			status = "ok";
			phy-mode = "sgmii";
			qcom,id = <2>;
			qcom,phy_mdio_addr = <0>;	/* none */
			qcom,poll_required = <0>;	/* no polling */
			qcom,rgmii_delay = <0>;
			qcom,emulation = <0>;
			mtd-mac-address = <&ART 0>;
			fixed-link {
				speed = <1000>;
				full-duplex;
			};
		};

		rpm@108000 {
			pinctrl-0 = <&i2c4_pins>;
			pinctrl-names = "default";
		};
	};

	gpio-keys {
		compatible = "gpio-keys";
		pinctrl-0 = <&button_pins>;
		pinctrl-names = "default";

		reset {
			label = "reset";
			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		aoss {
			label = "aoss";
			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RFKILL>;
		};

	};

	gpio-leds {
		compatible = "gpio-leds";
		pinctrl-0 = <&led_pins>;
		pinctrl-names = "default";

		power_white: power_white {
			label = "wxr-2533dhp:white:power";
			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
			default-state = "keep";
		};

		power_orange: power_orange {
			label = "wxr-2533dhp:orange:power";
			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
			default-state = "keep";
		};

		wireless_white: wireless_white {
			label = "wxr-2533dhp:white:wireless";
			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
		};

		wireless_orange: wireless_orange {
			label = "wxr-2533dhp:orange:wireless";
			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
		};

		internet_white: internet_white {
			label = "wxr-2533dhp:white:internet";
			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
		};

		internet_orange: internet_orange {
			label = "wxr-2533dhp:orange:internet";
			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
		};

		router_white: router_white {
			label = "wxr-2533dhp:white:router";
			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
		};

		router_orange: router_orange {
			label = "wxr-2533dhp:orange:router";
			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
		};

		usb_green: usb_green {
			label = "wxr-2533dhp:green:usb";
			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
		};

		guest_green: guest_green {
			label = "wxr-2533dhp:green:guest";
			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
		};
	};
};

&adm_dma {
	status = "ok";
};