// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; #include "mt7621.dtsi" #include #include / { compatible = "xiaomi,mi-router-cr6606", "mediatek,mt7621-soc"; model = "Xiaomi Mi Router CR6606"; aliases { led-boot = &led_sys_yellow; led-failsafe = &led_sys_yellow; led-running = &led_sys_blue; led-upgrade = &led_sys_yellow; label-mac-device = &gmac0; }; chosen { bootargs = "console=ttyS0,115200n8"; }; leds { compatible = "gpio-leds"; led_sys_yellow: sys_yellow { label = "mi-router-cr6606:yellow:sys"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; led_sys_blue: sys_blue { label = "mi-router-cr6606:blue:sys"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; net_yellow { label = "mi-router-cr6606:yellow:net"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; net_blue { label = "mi-router-cr6606:blue:net"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &nand { status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "Bootloader"; reg = <0x0 0x80000>; read-only; }; partition@80000 { label = "Nvram"; reg = <0x80000 0x40000>; read-only; }; partition@c0000 { label = "Bdata"; reg = <0xc0000 0x40000>; read-only; }; factory: partition@100000 { label = "Factory"; reg = <0x100000 0x80000>; read-only; }; partition@180000 { label = "crash"; reg = <0x180000 0x40000>; read-only; }; partition@1c0000 { label = "crash_log"; reg = <0x1c0000 0x40000>; read-only; }; partition@200000 { label = "kernel"; reg = <0x200000 0x400000>; }; partition@600000 { label = "ubi"; reg = <0x600000 0x7980000>; }; }; }; &pcie { status = "okay"; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0>; }; }; &gmac0 { mtd-mac-address = <&factory 0x3fff4>; }; &switch0 { ports { port@0 { status = "okay"; label = "lan1"; }; port@1 { status = "okay"; label = "lan2"; }; port@2 { status = "okay"; label = "lan3"; }; port@4 { status = "okay"; label = "wan"; mtd-mac-address = <&factory 0x3fffa>; }; }; }; &state_default { gpio { groups = "jtag", "uart3", "wdt"; function = "gpio"; }; };