/* Copyright (c) 2015, The Linux Foundation. All rights reserved. * Copyright (C) 2019 X-WRT * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * */ #include "qcom-ipq4019.dtsi" #include #include #include / { model = "ASUS RT-ACRH17"; compatible = "asus,rt-acrh17"; memory { device_type = "memory"; reg = <0x80000000 0x10000000>; }; aliases { led-boot = &power; led-failsafe = &power; led-running = &power; led-upgrade = &power; }; chosen { bootargs-append = " ubi.mtd=UBI_DEV"; }; soc { rng@22000 { status = "okay"; }; mdio@90000 { status = "okay"; }; ess-psgmii@98000 { status = "okay"; }; tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; qcom,wifi_glb_cfg = ; }; tcsr@194b000 { compatible = "qcom,tcsr"; reg = <0x194b000 0x100>; qcom,usb-hsphy-mode-select = ; }; ess_tcsr@1953000 { compatible = "qcom,tcsr"; reg = <0x1953000 0x1000>; qcom,ess-interface-select = ; }; tcsr@1957000 { compatible = "qcom,tcsr"; reg = <0x1957000 0x100>; qcom,wifi_noc_memtype_m0_m2 = ; }; usb2@60f8800 { status = "okay"; }; usb3@8af8800 { status = "okay"; }; crypto@8e3a000 { status = "okay"; }; watchdog@b017000 { status = "okay"; }; ess-switch@c000000 { status = "okay"; }; edma@c080000 { status = "okay"; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&tlmm 11 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; power: status { label = "rt-acrh17:blue:status"; gpios = <&tlmm 40 GPIO_ACTIVE_LOW>; }; lan1 { label = "rt-acrh17:blue:lan1"; gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; }; lan2 { label = "rt-acrh17:blue:lan2"; gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; }; lan3 { label = "rt-acrh17:blue:lan3"; gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; }; lan4 { label = "rt-acrh17:blue:lan4"; gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; }; wan_blue { label = "rt-acrh17:blue:wan"; gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; }; wan_red { label = "rt-acrh17:red:wan"; gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>; }; wlan2g { label = "rt-acrh17:blue:wlan2g"; gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; }; wlan5g { label = "rt-acrh17:blue:wlan5g"; gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; }; }; }; &cryptobam { status = "okay"; }; &blsp_dma { status = "okay"; }; &qpic_bam { status = "okay"; }; &nand { pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; status = "okay"; nand@0 { partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "Bootloader"; reg = <0x000000000000 0x000000400000>; read-only; }; partition@400000 { label = "UBI_DEV"; reg = <0x000000400000 0x000007C00000>; }; }; }; }; &tlmm { serial_pins: serial_pinmux { mux { pins = "gpio16", "gpio17"; function = "blsp_uart0"; bias-disable; }; }; nand_pins: nand_pins { pullups { pins = "gpio53", "gpio58", "gpio59"; function = "qpic"; bias-pull-up; }; pulldowns { pins = "gpio55", "gpio56", "gpio57", "gpio60", "gpio62", "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio69"; function = "qpic"; bias-pull-down; }; }; }; &pcie0 { status = "okay"; perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; bridge@0,0 { reg = <0x00000000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; ranges; wifi2: wifi@1,0 { compatible = "qcom,ath10k"; status = "okay"; reg = <0x00010000 0 0 0 0>; }; }; }; &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "RT-ACRH17"; }; &blsp1_uart1 { pinctrl-0 = <&serial_pins>; pinctrl-names = "default"; status = "okay"; }; &usb3_ss_phy { status = "okay"; }; &usb3_hs_phy { status = "okay"; }; &usb2_hs_phy { status = "okay"; };