This set the CONFIG_FRAME_WARN option depending on some target settings.
It will use the default from the upstream kernel and not the hard coded
value of 1024 now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Ensure the MAC address for all NanoPi R1 boards is assigned uniquely for
each board.
The vendor ships the device in two variants; one with and one without
eMMC; but both without static mac-addresses.
In order to assign both board types unique MAC addresses, fall back on
the same method used for the NanoPi R2S and R4S in case the EEPROM
chip is not present by generating the board MAC from the SD card CID.
[0] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R1#Hardware_Spec
Similar too and based on:
commit b5675f500daf ("rockchip: ensure NanoPi R4S has unique MAC address")
Co-authored-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip: add support for dilusense dlfr100
* rockchip: add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* rockchip:add support for dilusense dlfr100
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update rk3399-dlfr100.dts
* Add files via upload
This commit add basic support for Photonicat Board.
Flash into lede:
Run first: dd if=openwrt-xxx.img of=/dev/mmcblk0
Then brush the img file to sdcard and insert it,
the system will boot from above.
Note:
Since rockchip does not release any code to power up their
device, disabled emmc for now until we can remove rkbin.
* Update Makefile
Add Support For Rocktech MPC1903
* Add support for Rocktech MPC1903
* Add support for Rocktech MPC1903
* Update armv8.mk
* Add support for Rocktech MPC1903
* Add support for Rocktech MPC1903
* Update armv8.mk
* Update rk3399-mpc1903.dts
* Add support for Rocktech MPC1903
* Update rk3399-mpc1903.dts
* Add support for Rocktech MPC1903
* Add support for Rocktech MPC1903
* Update armv8.mk
* Delete mpc1903.bootscript
* Add rk3399-mpc1903.dts
* Add support for Rocktech MPC1903
* kernel: bump 5.15 to 5.15.86
Removed upstreamed:
pending-5.15/101-Use-stddefs.h-instead-of-compiler.h.patch[1]
ipq60xx/patches-5.15/0171-arm64-dts-qcom-ipq6018-cp01-c1-use-BLSPI1-pins.patch
ipq806x/patches-5.15/122-01-clk-qcom-clk-krait-fix-wrong-div2-functions.patch[2]
ipq60xx/patches-5.15/0139-arm64-dts-qcom-Correct-QMP-PHY-child-node-name.patch
ipq60xx/patches-5.15/0005-v5.16-arm64-dts-qcom-Correct-QMP-PHY-child-node-name.patch
ipq807x/patches-5.15/0004-v5.16-arm64-dts-qcom-Correct-QMP-PHY-child-node-name.patch
bcm27xx/patches-5.15/950-0198-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch[3]
Manually rebased:
ramips/patches-5.15/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch[4]
Added patch/backported:
ramips/patches-5.15/107-PCI-mt7621-Add-sentinel-to-quirks-table.patch[5]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=c160505c9b574b346031fdf2c649d19e7939ca11
2. Cannot find in the stable tree but it is here: a051e10bfc
3. ec1727f89e
4. Quilt gave this output when I applied the patch to rebase it:
% quilt push -f
Applying patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch
patching file arch/mips/ralink/Kconfig
patching file drivers/pci/controller/Kconfig
patching file drivers/pci/controller/Makefile
patching file drivers/staging/Kconfig
patching file drivers/staging/Makefile
patching file drivers/staging/mt7621-pci/Kconfig
patching file drivers/staging/mt7621-pci/Makefile
patching file drivers/staging/mt7621-pci/TODO
patching file drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt
patching file drivers/staging/mt7621-pci/pci-mt7621.c
Hunk #1 FAILED at 1.
Not deleting file drivers/staging/mt7621-pci/pci-mt7621.c as content differs from patch
1 out of 1 hunk FAILED -- saving rejects to file drivers/staging/mt7621-pci/pci-mt7621.c.rej
patching file drivers/pci/controller/pcie-mt7621.c
Applied patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch (forced; needs refresh)
Upon inspecting drivers/staging/mt7621-pci/pci-mt7621.c.rej, it seems that
the original patch wants to delete drivers/staging/mt7621-pci/pci-mt7621.c
but upstream's version was not an exact match. I opted to delete that file
and need some feedback. Was that the correct course of action?
5. Suggestion by hauke: 19098934f9
"This patch is in upstream kernel, but it was backported to the old
staging driver in kernel 5.15."
Build system: x86_64
Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* oxnas: sata_oxnas: use ata_link_err
Kernel 5.15.86 has backported ("ata: libata: move ata_{port,link,dev}_dbg
to standard pr_XXX() macros") and this is now causing compilation errors
for oxnas SATA driver due to usage of ata_link_printk().
Upstream has migrated to using the appropriate
ata_link_{err, warn, notice, info} calls a while ago so its not affected.
Lets do the same for oxnas SATA driver and use ata_link_err() instead of
ata_link_printk().
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: John Audia <therealgraysky@proton.me>
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Co-authored-by: John Audia <therealgraysky@proton.me>
Co-authored-by: Robert Marko <robimarko@gmail.com>
* kernel: bump 5.15 to 5.15.83
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* kernel: bump 5.10 to 5.10.159
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* kernel: bump 5.4 to 5.4.227
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* kernel: bump 5.15 to 5.15.82
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* kernel: add symbol in generic config for 5.10.157
Add CONFIG_INET_TABLE_PERTURB_ORDER=16 to generic config
Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.158
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* kernel: bump 5.4 to 5.4.226
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Signed-off-by: John Audia <therealgraysky@proton.me>
Co-authored-by: John Audia <therealgraysky@proton.me>
Manually rebased:
hack-6.0/645-netfilter-connmark-introduce-set-dscpmark.patch[1]
All other patches automatically rebased
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Co-authored-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.81
Manually rebased:
backport-5.15/715-v6.0-net-ethernet-mtk_eth_soc-add-the-capability-to-run-m.patch
hack-5.15/645-netfilter-connmark-introduce-set-dscpmark.patch[1]
All other patches automatically rebased
Signed-off-by: John Audia <therealgraysky@proton.me>
Co-authored-by: John Audia <therealgraysky@proton.me>
Manually rebase:
pending-5.15/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
ath79/patches-5.15/910-unaligned_access_hacks.patch
All other patches automatically rebased
Co-authored-by: John Audia <therealgraysky@proton.me>
Signed-off-by: Liu Linhui <liulinhui36@gmail.com>
Signed-off-by: Liu Linhui <liulinhui36@gmail.com>
Co-authored-by: John Audia <therealgraysky@proton.me>
Manually rebase:
pending-6.0/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
All other patches automatically rebased
Co-authored-by: John Audia <therealgraysky@proton.me>
Signed-off-by: Liu Linhui <liulinhui36@gmail.com>
Signed-off-by: Liu Linhui <liulinhui36@gmail.com>
Co-authored-by: John Audia <therealgraysky@proton.me>
Manually rebased: ath79/patches-5.10/910-unaligned_access_hacks.patch
All other patches automatically rebased.
Co-authored-by: John Audia <therealgraysky@proton.me>
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Manually rebased:
bcm27xx/patches-5.15/950-0600-xhci-quirks-add-link-TRB-quirk-for-VL805.patch
bcm27xx/patches-5.15/950-0606-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch
bcm27xx/patches-5.15/950-0717-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch
bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
lantiq/patches-5.15/0028-NET-lantiq-various-etop-fixes.patch
All other patches automatically rebased
Co-authored-by: John Audia <therealgraysky@proton.me>
Signed-off-by: John Audia <therealgraysky@proton.me>
