This commit add basic support for Photonicat Board.
Flash into lede:
Run first: dd if=openwrt-xxx.img of=/dev/mmcblk0
Then brush the img file to sdcard and insert it,
the system will boot from above.
Note:
Since rockchip does not release any code to power up their
device, disabled emmc for now until we can remove rkbin.
* Update Makefile
Add Support For Rocktech MPC1903
* Add support for Rocktech MPC1903
* Add support for Rocktech MPC1903
* Update armv8.mk
* Add support for Rocktech MPC1903
* Add support for Rocktech MPC1903
* Update armv8.mk
* Update rk3399-mpc1903.dts
* Add support for Rocktech MPC1903
* Update rk3399-mpc1903.dts
* Add support for Rocktech MPC1903
* Add support for Rocktech MPC1903
* Update armv8.mk
* Delete mpc1903.bootscript
* Add rk3399-mpc1903.dts
* Add support for Rocktech MPC1903
The current target code is too chaotic, the patches are
messy and disorderly, and there are still many duplicate
code. Pack it back to half a year ago.
With this change you need have swig and libpython3-dev installed on
your host, which should be done already.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Nobody ever updates PKG_RELEASE when changing devices or setup in
the various uboot-* packages. Use $(AUTORELEASE) so we still have
proper versioning there.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Co-authored-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* Revert "uboot-rockchip: update NanoPi R2S patches"
This reverts commit bda6f6572be630bcf9a1c8a429e40d8a53033af5.
This commit breaks the onboard ethernet on some units. Revert it for
now.
Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: enable Realtek PHY support
The NanoPi R2S features a Realtek Gigabit Ethernet PHY. Enable the
Realtek specific PHY driver to correctly configure internal delays.
Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-rockchip: fix nanopi-r2s failed to boot on some sd cards
Add regulator-boot-on parameters to vcc_sd.
Add startup-delay-us parameters to vcc_sdio.
This will improve the problem that in some SD cards are failing to boot up.
Signed-off-by: Yuan Tao <ty@wevs.org>
* rockchip: fix NanoPi R2S GMAC clock name
This commit fixes the name for the GMAC clock to gmac_clkin, as this is
the name of the clock provided by the rk3328-clk driver.
Without this commit, the GMAC will not work in TX direction.
Suggested-by: Tobias Waldvogel <tobias.waldvogel@gmail.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Co-authored-by: David Bauer <mail@david-bauer.net>
Co-authored-by: Yuan Tao <ty@wevs.org>
* rockchip: refresh NanoPi R2S patches
Update the patches for the NanoPi R2S to the v3 sent (and accepted)
upstream.
Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: rk3328: add compatible to NanoPi R2S ethernet PHY
This adds the compatible property to the NanoPi R2S ethernet PHY node.
Otherwise, the PHY might not be probed, as the PHY ID reads all 0xff
when it is still in reset.
Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-rockchip: update NanoPi R2S patches
Update the patches required for the NanoPi R2S to match the DTS accepted
for upstream Linux. The U-Boot patch meanwhile is still pending
upstream.
Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: refresh target patches
Signed-off-by: CN_SZTL <cnsztl@project-openwrt.eu.org>
Co-authored-by: CN_SZTL <cnsztl@project-openwrt.eu.org>
Co-authored-by: wevsty <ty@wevs.org>
* rockchip: fix NanoPi R2S PHY ID
Fix the PHY ID for the NanoPi R2S PHY compatible to match the used PHY.
The ID was wrong as I've accidentally picked the wrong upstream patch.
Signed-off-by: David Bauer <mail@david-bauer.net>
Co-authored-by: David Bauer <mail@david-bauer.net>
Co-authored-by: wevsty <ty@wevs.org>
