Having different build directories is the default when the package
Makefile defines more than one variant.
Mac80211 overrides PKG_BUILD_DIR, not taking different variants in
consideration, which causes clobbering the directories when both
variants are built.
When compiled with AUTOREMOVE=y, the effect is that the package is
unnecessarily rebuilt when the package is compiled again.
Wihout AUTOREMOVE, the problem is worse: the second variant will not be
rebuilt, and you end up with the smallbuffers variant being a copy of
the regular one.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
The memory mapped TPM interface (TIS) can be used for
emulated or virtualized TPM instances with QEMU and
a simulation package like swtpm.
On QEMU the device will appear in the device tree
with a "tcg,tpm-tis-mmio" compatible.
For example:
qemu-system-aarch64 -machine virt -cpu max \
-bios u-boot.bin \
-nographic \
.... \
-hda openwrt-armsr-armv8-combined-efi.img \
-chardev socket,id=chrtpm,path=/tmp/mytpm/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis-device,tpmdev=tpm0
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Link: https://github.com/openwrt/openwrt/pull/19188
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
New stm32 target introduces support for stm32mp1 based devices.
For now it includes an initial support of the STM32MP135F-DK device.
The specifications bellow only list supported features.
Specifications
--------------
SOC: STM32MP135FAF7
RAM: 512 MiB
Storage: SD Card
Ethernet: 2x 100 Mbps
Wireless: 2.4GHz Cypress CYW43455 (802.11b/g/n)
LEDs: Heartbeat (Blue)
Buttons: 1x Reset, 1x User (USER2)
USB: 4x 2.0 Type-A
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add kernel package for DesignWare I2C platform controller.
This controller is used on the RP1 SoC found on RPi 5 devices.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
The kernel provides two variants of the lz4 compression a normal version
and a high compression mode version. The old kmod-lib-lz4 package
contained the normal version plus one part of the lz4hc version. There
was already code which selected the kmod-lib-lz4hc package which did
not exists.
I split this into 3 packages. kmod-lib-lz4 and kmod-lib-lz4hc for the
normal the and high compression algorithm which contain the specific
code and the kmod-lib-lz4-decompress which contains the common
decompressor.
New we are also packaging lz4hc.ko
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/15833
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
QCN6122 wifi in fw-memory-mode 1 has a slightly larger caldb size than
currently defined in the ath11k driver. When coldboot calibration was
disabled, the fw mem mode was changed from 2 (256MB mem profile) to 1
(512MB mem profile), which is the correct setting for devices in scope.
However, in fw mem mode, the caldb size is 0x500000 instead of the max
0x480000 defined in the driver, causing QCN6122 wifi failing to boot:
ath11k b00a040.wifi1: qmi mem size is low to load caldata
ath11k b00a040.wifi1: failed to assign qmi target memory: -22
As such, change the max caldb memory size accordingly.
This macro is used by the driver only as a max size limit to validate
the requested caldb size returned by QMI. Different ath11k wifi chips
have different caldb sizes (for ex. the size for IPQ5018 is 0x200000).
Fixes: d4adc99 ("wifi: ath11k: disable coldboot calibration for ipq5018")
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Coldboot calibration does not work causes the firmware to crash during
wifi startup. So let's disable coldboot calibration until a solution is
found.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add new setting CONFIG_NET_DSA_REALTEK_RTL8366RB_LEDS which
was introduced in kernel 6.12 and allows enabling LEDs for
the Realtek RTL8366RB subdriver.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add kernel module for LP5523/LP55231 LED driver.
The kmod-leds-lp5523 depends on kmod-leds-lp55xx-common.
Signed-off-by: Sergey Shlukov <ichizakurain@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add patches to enable QCN9274 radios that support both 5GHz and 6GHz
bands.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://github.com/openwrt/openwrt/pull/18459
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add QCN6122 platform support.
QCN6122 is a PCIe based solution that is attached to and enumerated
by the WPSS (Wireless Processor SubSystem) Q6 processor.
Though it is a PCIe device, since it is not attached to APSS processor
(Application Processor SubSystem), APSS will be unaware of such a decice
and hence it is registered to the APSS processor as a platform device(AHB).
Because of this hybrid nature, it is called as a hybrid bus device.
As such, QCN6122 is a hybrid bus type device and follows the same codepath
as for WCN6750.
Co-developed-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Upstream removed SSB and BCMA, the drivers are now compiled against
the in kernel versions. No need to patch this for OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This package is for NPU/VPU firmware.
Details in https://github.com/intel/linux-npu-driver
Intel VPU firmware is now part of linux-firmware.
The current FW file names in linux-firmware do not match intel vpu
driver, create links to fix it.
Signed-off-by: Joe Zheng <joe.zheng@intel.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Package kmod-drm-panel-mipi-dbi as well as modules it depends on in
order to support a wide range of MIPI DBI complaint SPI-connected
TFT panels.
See https://github.com/notro/panel-mipi-dbi/ for more information on
how to use specific panels.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
kmod-drm-rp1-dsi, kmod-drm-rp1-dpi and kmod-drm-rp1-vec should depend on
kmod-drm-dma-helper and kmod-drm-vram-helper in order to fix dependency
errors when all kernel modules are selected.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Driver moved to different CRC library in v6.12
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Create a crypto-lib-aescfb package needed for new deps for kmod-tpm.
Package kmod-tpm is missing dependencies for the following libraries:
ecdh_generic.ko
kpp.ko
libaescfb.ko
Co-authored-by: John Audia <therealgraysky@proton.me>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
These packages are needed for the stm32 target.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This allows the network interface naming to be stable, free from any
possible interaction from external USB network devices that might
claim usb* interface names.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Remove settings and depends that are not used anywhere.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
OpenWrt-CI / Build OpenWrt Firmware (push) Failing after 5s
It doesn't depend on either usb-net or usb-net-cdc-ncm. It does, however, depend
on mii. Fix thusly, and make it depend explicitly on usb, not usb-net.
While at it, add a conditional dependency on libphy, for future kernel versions.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Add support for the Intel E800 series of cards, with
switchdev support enabled for lower CPU usage.
Signed-off-by: Stephen Howell <howels@allthatwemight.be>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
