The option 31 in the RA specifies the DNS search list, the support
to configure this via UCI is missing in case dnsmasq-dhcpv6 is used.
This commit uses the uci option domain (same as is done by odhcpd) to
read and pass the DNS search list to dnsmasq, which is then used by RA.
Hence, with this commit, we are able to configure DNS search list for the
RA messages via the uci config when dnsmsaq-dhcpv6 is used.
Signed-off-by: Rahul Thakur <rahul.thakur@iopsys.eu>
* build: fix incomplete initramfs compression options
Requires: tools/lz4, tools/lzop
complete the wiring so that these options work:
* `CONFIG_KERNEL_INITRAMFS_COMPRESSION_LZO`
* `CONFIG_KERNEL_INITRAMFS_COMPRESSION_LZ4`
Signed-off-by: Tony Butler <spudz76@gmail.com>
[remove blocking dependencies for separate ramdisk, fix lzop options]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* include: sync with upstream
* toolchain/binutils: add support for version 2.40
Release notes:
https://sourceware.org/pipermail/binutils/2023-January/125671.html
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* toolchain/gcc: switch to version 12 by default
Also fix build error with gcc 12.
* toolchain/nasm: update to 2.16.01
ChangeLog:
Version 2.16.01
_This is a documentation update release only._
(*) Fix the creation of the table of contents in the HTML version of
the documentation.
Version 2.16
(*) Support for the `rdf' format has been discontinued and all the
RDOFF utilities has been removed.
(*) The `--reproducible' option now leaves the filename field in the
COFF object format blank. This was always rather useless since
it is only 18 characters long; as such debug formats have to
carry their own filename information anyway.
(*) Fix handling of MASM-syntax reserved memory (e.g. `dw ?') when
used in structure definitions.
(*) The preprocessor now supports functions, which can be less
verbose and more convenient than the equivalent code implemented
using directives. See section 4.4.
(*) Fix the handling of `%00' in the preprocessor.
(*) Fix incorrect handling of path names affecting error messages,
dependency generation, and debug format output.
(*) Support for the RDOFF output format and the RDOFF tools have
been removed. The RDOFF tools had already been broken since at
least NASM 2.14. For flat code the ELF output format
recommended; for segmented code the `obj' (OMF) output format.
(*) New facility: preprocessor functions. Preprocessor functions,
which are expanded similarly to single-line macros, can greatly
simplify code that in the past would have required a lengthy
list of directives and intermediate macros. See section 4.4.
(*) Single-line macros can now declare parameters (using a `&&'
prefix) that creates a quoted string, but does _not_ requote an
already quoted string. See section 4.2.1.
(*) Instruction table updated per public information available as of
November 2022.
(*) All warnings in the preprocessor have now been assigned warning
classes. See appendix A.
(*) Fix the invalid use of `RELA'-type relocations instead of `REL'-
type relocations when generating DWARF debug information for the
`elf32' output format.
(*) Fix the handling `at' in `istruc' when the structure contains
local labels. See section 5.9.2.
(*) When assembling with `--reproducible', don't encode the filename
in the COFF header for the `coff', `win32' or `win64' output
formats. The COFF header only has space for an 18-character
filename, which makes this field rather useless in the first
place. Debug output data, if enabled, is not affected.
(*) Fix incorrect size calculation when using MASM syntax for non-
byte reservations (e.g. `dw ?'.)
(*) Allow forcing an instruction in 64-bit mode to have a (possibly
redundant) REX prefix, using the syntax `{rex}' as a prefix.
(*) Add a `{vex}' prefix to enforce VEX (AVX) encoding of an
instruction, either using the 2- or 3-byte VEX prefixes.
(*) The `CPU' directive has been augmented to allow control of
generation of VEX (AVX) versus EVEX (AVX-512) instruction
formats, see section 7.11.
(*) Some recent instructions that previously have been only
available using EVEX encodings are now also encodable using VEX
(AVX) encodings. For backwards compatibility these encodings are
not enabled by default, but can be generated either via an
explicit `{vex}' prefix or by specifying either `CPU LATEVEX' or
`CPU NOEVEX'; see section 7.11.
(*) Document the already existing `%unimacro' directive. See section
4.5.12.
(*) Fix a code range generation bug in the DWARF debug format
(incorrect information in the `DW_AT_high_pc' field) for the ELF
output formats. This bug happened to cancel out with a bug in
older versions of the GNU binutils linker, but breaks with other
linkers and updated or other linkers that expect the spec to be
followed.
(*) Fix segment symbols with addends, e.g. `jmp _TEXT+10h:0' in
output formats that support segment relocations, e.g. the `obj'
format.
(*) Fix various crashes and hangs on invalid input.
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* toolchain: musl: Fix symbol loading in gdb
Fix DT_DEBUG handling on MIPS in musl libc.
With this change gdb will load the symbol files for shared libraries on MIPS too.
This patch was taken from this thread: https://www.openwall.com/lists/musl/2022/01/09/4
Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* tools: sync with upstream
* build: fix issues with targets installed via feeds
- fix including modules.mk when a target is being replaced
- fix calling make targets from target/linux
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* package: sync with upstream
Signed-off-by: Tony Butler <spudz76@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: Tony Butler <spudz76@gmail.com>
Co-authored-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
Co-authored-by: Felix Fietkau <nbd@nbd.name>
* mpc85xx: add support for cpu type 8548
8540 cpu type corresponds to e500v1 core while
8548 cpu type corresponds to e500v2 core
See https://www.nxp.com/products/processors-and-microcontrollers/legacy-mpu-mcus/powerquicc-processors:POWERQUICC_HOME#powerquicc-iii-mpc85xx
and https://www.nxp.com/docs/en/application-note/AN2807.pdf .
Co-authored-by: Josef Schlehofer <josef.schlehofer@nic.cz>
Co-authored-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
* tree-wide: Do not use package librt and libpthread
The libraries libpthread, libdl, libutil, libanl have been integrated
into the libc library in version 2.34. it is not needed to explicitly
link them any more.
Most of the functions have been moved from the librt.so into libc.so
some time ago already.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/binutils: backport stable patches
Add the patches with real changes from the binutils 2.39 stable branch.
I am not aware that we ran into any of these problems, but I think it is
better to take the existing stable patches.
They were exported like this:
git format-patch binutils-2_39...origin/binutils-2_39-branch
I removed the patches changing the version numbers only.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/binutils: switch to version 2.39 by default
This was build tested with all core packages on all targets
successfully.
This was run tested on the following systems:
* lantiq/xrx200 musl
* sunxi/cortex53 musl
* x86/64 musl
* x86/64 glibc
Some trusted firmware arm builds needed some fixes to build with
binutils 2.39, this was merged before.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools: Improve diffability/maintainability
There's no purpose to squish multiple tools into a single line (and
spread those out over multiple lines). It might look 'nice' in certain
conditions, but it's annoying to maintain.
For example, but not limited to:
* adding/removing tools, causes hard to read diffs
* Duplicates are harder to spot
* Sorting can not be (easily?) automated
With this proposed change, the above annoyances go away. Inserting a new
tool can be done with a single line-change-diff, sorting can be done by
any editor (in vi, select, :sort for example) and dupes are much easier
to spot.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* rules: drop -Wno-error additional flags from default TARGET_CFLAGS
We currently enable -Wno-error=unused-but-set-variable and
-Wno-error=unused-result by default on every compile package.
While this is (relatively) unharmful, we should follow other project
direction and starts enforcing good code quality. For example the linux
kernel recently started to enforce Wall by default and clean code is
mandatory for inclusion.
Drop for good these flags and and make it mandatory to correctly handle
return values at least with a warning log if they are not strictly error
condition.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* bridger: update to the latest version
def7755c459d add missing copyright headers
f68307fd96d7 add hairpin mode support
9ee8f433ba4e nl: do not pass NDA_VLAN with vid=0
978c1f9eed07 add support for the bridge port isolated flag
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: Šimon Bořek <simon.borek@nic.cz>
Co-authored-by: Josef Schlehofer <josef.schlehofer@nic.cz>
Co-authored-by: Pali Rohár <pali@kernel.org>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Co-authored-by: Olliver Schinagl <oliver@schinagl.nl>
Co-authored-by: Christian Marangi <ansuelsmth@gmail.com>
Co-authored-by: Felix Fietkau <nbd@nbd.name>
* uhttpd: update to latest Git HEAD
e3395cd ucode: initialize search path before VM init
8cb3f85 ucode: initialize default library search path
188dea2 utils: accept '?' as path terminator in uh_path_match()
c5eac5d file: support using dynamic script handlers as error pages
290ff88 relay: trigger close if in header read state with pending data
f9db538 ucode: ignore exit exceptions
8ba0b64 cmake: use variables and find_library for dependency
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uhttpd: use acme hotplug
Reload uhttpd after certificates are renewed with acme.
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Glen Huang <i@glenhuang.com>
* uhttpd: use procd to reload on acme renew
Calling /etc/init.d/uhttpd reload directly in the acme hotplug script
can inadvertently start a stopped instance.
Signed-off-by: Glen Huang <i@glenhuang.com>
* uhttpd: update to latest Git HEAD
2397755 client: fix incorrectly emitting HTTP 413 for certain content lengths
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Glen Huang <i@glenhuang.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Co-authored-by: Jo-Philipp Wich <jo@mein.io>
Co-authored-by: Glen Huang <i@glenhuang.com>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Most relevant feature for openwrt in this release, supports dynamically
removing hosts from 'hostsdir' supplied host files.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* package: sync with upstream
Removed: package/libs/libselinux/bcm27xx-userland (Already in package/utils/bcm27xx-userland)
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* uclibc++: remove
No package here depends on it. Furthermore, uClibc++ is a fairly buggy
C++ library and seems to be relatively inactive upstream.
It also lacks proper support for modern C++11 features.
The main benefit of it is size: 66.6 KB vs 287.3 KB on mips24kc. Static
linking and LTO can help bring the size down of packages that need it.
Added warning message to uclibc++.mk
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* target: sync with upstream
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* toolchain: gcc: Remove gcc 10.x support
This compiler is old and was never used by default in OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ucode: update to latest Git HEAD
46d93c9 tests: fixup testcases
4c654df types: adjust double printing format
eac2add compiler: fix bytecode for logical assignments of properties
3903b18 fs: add `realpath()` function
8366102 math: add isnan() function
eef83d3 tests: relax sleep() test
394e901 lib: uc_json(): accept trailing whitespace when parsing strings
1867c8b uloop: terminate parent uloop in task child processes
d2cc003 uci: auto-load package in `ctx.foreach()` and `ctx.get_first()`
6c5ee53 compiler: ensure that arrow functions with block bodies return no value
fdc9b6a compiler: fix `??=`, `||=` and `&&=` logical assignment semantics
88dcca7 add cmake to install requires for debian
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* firewall4: update to latest Git HEAD
700a925 fw4: prevent null access when no ipsets are defined
6443ec7 config: drop input traffic by default
119ee1a ruleset: drop ctstate invalid traffic for masq-enabled zones
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ustream-ssl: update to Git version 2022-12-07
9217ab4 ustream-openssl: Disable renegotiation in TLSv1.2 and earlier
2ce1d48 ci: fix building with i.MX6 SDK
584f1f6 ustream-openssl: wolfSSL: provide detailed information in debug builds
aa8c48e cmake: add a possibility to set library version
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/mpfr: import patch fixing macro bug
Co-authored-by: Nick Hainke <vincent@systemli.org>
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Co-authored-by: Rosen Penev <rosenp@gmail.com>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Co-authored-by: Jo-Philipp Wich <jo@mein.io>
Co-authored-by: Nick Hainke <vincent@systemli.org>
This backports a commit from upstream dnsmasq to fix CVE-2022-0934.
CVE-2022-0934 description:
A single-byte, non-arbitrary write/use-after-free flaw was found in
dnsmasq. This flaw allows an attacker who sends a crafted packet
processed by dnsmasq, potentially causing a denial of service.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This will prevent `module is already loaded` lines from
appearing in the logs when a PPP connection is reconnecting
Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
Co-authored-by: Manas Sambhus <manas.sambhus+github@gmail.com>
WPA3 enterprise requires group_mgmt_cipher=BIP-GMAC-256 and if 802.11r is
active also wpa_key_mgmt FT-EAP-SHA384. This commit also requires
corresponding changes in netifd.
Signed-off-by: Joerg Werner <schreibubi@gmail.com>
This package uses BPF to create a fast path which improves bridging performance
by bypassing the bridge layer. It also supports creating tc offload rules for
hardware that supports it.
Hardware offload support can be used with MT7622 + MT7915 once it is merged
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This adds the pending support for the BSS color collision handling.
This way drivers that implement CCA can on the fly change the BSS color
ID once a collision is detected.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Co-authored-by: Robert Marko <robimarko@gmail.com>
