* mpc85xx: add support for cpu type 8548
8540 cpu type corresponds to e500v1 core while
8548 cpu type corresponds to e500v2 core
See https://www.nxp.com/products/processors-and-microcontrollers/legacy-mpu-mcus/powerquicc-processors:POWERQUICC_HOME#powerquicc-iii-mpc85xx
and https://www.nxp.com/docs/en/application-note/AN2807.pdf .
Co-authored-by: Josef Schlehofer <josef.schlehofer@nic.cz>
Co-authored-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
* tree-wide: Do not use package librt and libpthread
The libraries libpthread, libdl, libutil, libanl have been integrated
into the libc library in version 2.34. it is not needed to explicitly
link them any more.
Most of the functions have been moved from the librt.so into libc.so
some time ago already.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/binutils: backport stable patches
Add the patches with real changes from the binutils 2.39 stable branch.
I am not aware that we ran into any of these problems, but I think it is
better to take the existing stable patches.
They were exported like this:
git format-patch binutils-2_39...origin/binutils-2_39-branch
I removed the patches changing the version numbers only.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/binutils: switch to version 2.39 by default
This was build tested with all core packages on all targets
successfully.
This was run tested on the following systems:
* lantiq/xrx200 musl
* sunxi/cortex53 musl
* x86/64 musl
* x86/64 glibc
Some trusted firmware arm builds needed some fixes to build with
binutils 2.39, this was merged before.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools: Improve diffability/maintainability
There's no purpose to squish multiple tools into a single line (and
spread those out over multiple lines). It might look 'nice' in certain
conditions, but it's annoying to maintain.
For example, but not limited to:
* adding/removing tools, causes hard to read diffs
* Duplicates are harder to spot
* Sorting can not be (easily?) automated
With this proposed change, the above annoyances go away. Inserting a new
tool can be done with a single line-change-diff, sorting can be done by
any editor (in vi, select, :sort for example) and dupes are much easier
to spot.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* rules: drop -Wno-error additional flags from default TARGET_CFLAGS
We currently enable -Wno-error=unused-but-set-variable and
-Wno-error=unused-result by default on every compile package.
While this is (relatively) unharmful, we should follow other project
direction and starts enforcing good code quality. For example the linux
kernel recently started to enforce Wall by default and clean code is
mandatory for inclusion.
Drop for good these flags and and make it mandatory to correctly handle
return values at least with a warning log if they are not strictly error
condition.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* bridger: update to the latest version
def7755c459d add missing copyright headers
f68307fd96d7 add hairpin mode support
9ee8f433ba4e nl: do not pass NDA_VLAN with vid=0
978c1f9eed07 add support for the bridge port isolated flag
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: Šimon Bořek <simon.borek@nic.cz>
Co-authored-by: Josef Schlehofer <josef.schlehofer@nic.cz>
Co-authored-by: Pali Rohár <pali@kernel.org>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Co-authored-by: Olliver Schinagl <oliver@schinagl.nl>
Co-authored-by: Christian Marangi <ansuelsmth@gmail.com>
Co-authored-by: Felix Fietkau <nbd@nbd.name>
Changelog: https://github.com/Mbed-TLS/mbedtls/releases/tag/v2.28.2
This release of Mbed TLS provides bug fixes and minor enhancements. This
release includes fixes for security issues.
Fixes the following CVEs:
* CVE-2022-46393: Fix potential heap buffer overread and overwrite in
DTLS if MBEDTLS_SSL_DTLS_CONNECTION_ID is enabled and
MBEDTLS_SSL_CID_IN_LEN_MAX > 2 * MBEDTLS_SSL_CID_OUT_LEN_MAX.
* CVE-2022-46392: An adversary with access to precise enough information
about memory accesses (typically, an untrusted operating system
attacking a secure enclave) could recover an RSA private key after
observing the victim performing a single private-key operation if the
window size used for the exponentiation was 3 or smaller.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
libpath.so uses host path in ld script causing other packages fail to
cross compile, e.g. perl:
"ld: cannot find /usr/lib/libbsd.so.0.11.6: No such file or directory"
Signed-off-by: Xuefer H <xuefer@gmail.com>
It has been brought to my attention that recently added WCN6855 firmware
is broken as it is getting stripped during building due to being 2 ELF
binaries.
I am sure WCN6750 and any other ELF binaries are having the same issue,
so since stripping firmware binaries is clearly unwanted disable it.
Fixes: b4d3694f81f4 ("linux-firmware: package ath11k consumer cards firmware")
Signed-off-by: Robert Marko <robimarko@gmail.com>
WCN6855 exists in 2 HW revisions, but both use the same FW so upstream
just has a symlink for hw2.1 to hw2.0 that I forgot to make.
Fixes: b4d3694f81f4 ("linux-firmware: package ath11k consumer cards firmware")
Signed-off-by: Robert Marko <robimarko@gmail.com>
* uhttpd: update to latest Git HEAD
e3395cd ucode: initialize search path before VM init
8cb3f85 ucode: initialize default library search path
188dea2 utils: accept '?' as path terminator in uh_path_match()
c5eac5d file: support using dynamic script handlers as error pages
290ff88 relay: trigger close if in header read state with pending data
f9db538 ucode: ignore exit exceptions
8ba0b64 cmake: use variables and find_library for dependency
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uhttpd: use acme hotplug
Reload uhttpd after certificates are renewed with acme.
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Glen Huang <i@glenhuang.com>
* uhttpd: use procd to reload on acme renew
Calling /etc/init.d/uhttpd reload directly in the acme hotplug script
can inadvertently start a stopped instance.
Signed-off-by: Glen Huang <i@glenhuang.com>
* uhttpd: update to latest Git HEAD
2397755 client: fix incorrectly emitting HTTP 413 for certain content lengths
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Glen Huang <i@glenhuang.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Co-authored-by: Jo-Philipp Wich <jo@mein.io>
Co-authored-by: Glen Huang <i@glenhuang.com>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Most relevant feature for openwrt in this release, supports dynamically
removing hosts from 'hostsdir' supplied host files.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* rules: fix broken commitcount on alpine system
To generate commitcount we use grep --max-count. This is not present on
alpine grep and cause wrong generation. Use -m as it's just the short
version of --max-count and more portable.
Fixes: #11200
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* image-commands.mk: Be consistent in command invocation
Most/all other tools use the staging dir prefix, gzip should as well.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Acked-by: Christian Marangi <ansuelsmth@gmail.com>
* image: fix device profile specific COMPILE targets
Commit a01d23e75 ("image: always rebuild kernel loaders")
is a step in the right direction, but exposed some issues
and regressions in the makefile.
Some of the files made by device specific COMPILE targets
start with an "append" command (i.e. >> instead of > redirection)
and if the file already exists, the target file is the
input to itself before the first recipe-specified input.
Fixes: a01d23e75 ("image: always rebuild kernel loaders")
Fixes: a7fb589e8 ("image: always rebuild kernel loaders")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
* trusted-firmware-a.mk: use correct CPE ID
There are 2 different CPE IDs on the NVD website:
cpe:/a:arm:trusted_firmware-a
cpe:/o:arm:arm_trusted_firmware
The ID as currently used in trusted-firmware-a.mk does not exist. The
CPE ID using the arm_trusted_firmware product name only lists a few
records for versions 2.2 and 2.3 on the NVD site. The CPE ID using the
trusted_firmware-a product name lists many more records, and actually
has a CVE linked to it. Therefore, use the CPE ID using the
trusted_firmware-a product name.
Fixes: 104d60fe94ce ("trusted-firmware-a.mk: add PKG_CPE_ID")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* fritz-tools: fritz_tffs_nand: exclude oob code when disabled
Skip unnecessary stuff if checking the oob data is disabled.
Signed-off-by: Andre Heider <a.heider@gmail.com>
* fritz-tools: fritz_tffs_nand: get rid of struct tffs_sectors
This doesn't help and "[0]" gets in the way of bounds checks.
Signed-off-by: Andre Heider <a.heider@gmail.com>
* fritz-tools: fritz_tffs_nand: cache already read sector ids
This speeds up the tool significantly, especially when using the "-a"
argument.
Signed-off-by: Andre Heider <a.heider@gmail.com>
* iproute2: add missing libbpf dependency
This patch adds libbpf to the dependencies of tc-mod-iptables.
The package tc-mod-iptables is missing libbpf as a dependency,
which leads to the build failure described in bug #9491
LIBBPF_FORCE=on set, but couldn't find a usable libbpf
The build dependency is already automatically added because some other
packages from iproute2 depend on libbpf, but bpftools has multiple build
variants. With multiple build variants none gets build by default and
the build system will not build bpftools before iproute2.
Fixes: #9491
Signed-off-by: Kien Truong <duckientruong@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iproute2: update to 6.0.0
Release Notes:
https://lore.kernel.org/netdev/20221004082610.56b04719@hermes.local/t/
Remove upstreamed patch:
- 010-ipstats-Add-param.h-for-musl.patch
Refreshed:
- 140-keep_libmnl_optional.patch
- 145-keep_libelf_optional.patch
- 150-keep_libcap_optional.patch
- 155-keep_tirpc_optional.patch
- 170-ip_tiny.patch
- 190-fix-nls-rpath-link.patch
- 200-drop_libbsd_dependency.patch
- 300-selinux-configurable.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
* iproute2: update to 6.1.0
Announcement:
https://lore.kernel.org/netdev/20221214094130.7b11ec2e@hermes.local/T/#t
Refresh patch:
- 170-ip_tiny.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
* tools/xz: update to 5.2.10
Update to latest version.
Signed-off-by: Nick Hainke <vincent@systemli.org>
* Revert "Revert "tools/upx: remove (#10622)""
This reverts commit d3e16f203a.
* kernel: Make use of KERNEL_MAKE
Make use of KERNEL_MAKE in kernel packages were easily possible.
This moves some more code to common places and reduces the number of
lines.
It is defined like this:
KERNEL_MAKE = $(MAKE) $(KERNEL_MAKEOPTS)
KERNEL_MAKEOPTS = -C $(LINUX_DIR) $(KERNEL_MAKE_FLAGS)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain: gcc: backport patches to fix build with glibc 2.36
glibc 2.36 changed the definition of enum fsconfig_command, it now
collides with the same definition from sys/mount.h. Remove the include
of linux/fs.h This still compiled with musl too.
This backports a patch which is already in the stable branch of GCC 11
and GCC 12.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain: glibc: Update to glibc 2.36
This updates to glibc to version 2.36.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/llvm: update to 15.0.6
Release Notes:
https://discourse.llvm.org/t/llvm-15-0-0-release/65099https://discourse.llvm.org/t/llvm-15-0-1-released/65380https://discourse.llvm.org/t/llvm-15-0-2-released/65695https://discourse.llvm.org/t/llvm-15-0-3-released/66036https://discourse.llvm.org/t/llvm-15-0-4-released/66337https://discourse.llvm.org/t/llvm-15-0-5-release/66616https://discourse.llvm.org/t/llvm-15-0-6-released/66899
Remove HOST_BUILD_PARALLEL as it's default now.
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Kien Truong <duckientruong@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Co-authored-by: Christian Marangi <ansuelsmth@gmail.com>
Co-authored-by: Olliver Schinagl <oliver@schinagl.nl>
Co-authored-by: Michael Pratt <mcpratt@pm.me>
Co-authored-by: Stijn Tintel <stijn@linux-ipv6.be>
Co-authored-by: Andre Heider <a.heider@gmail.com>
Co-authored-by: Kien Truong <duckientruong@gmail.com>
Co-authored-by: Nick Hainke <vincent@systemli.org>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Several sunxi devices come with multiple mmc devices. On such devices,
the mmc device order is unpredictable, so using /dev/mmcblk0p2 as root
device doesn't always work, which results in unbootable devices.
For the Banana Pi BPI-R3 in the mediatek target, this has been solved by
defining aliases for the mmc devices in the DTS. Ideally we would do the
same here, but for sunxi-a64 we already use UUID probing, so let's start
with that (5f2ff607e286 ("uboot-sunxi: a64: allow booting directly from
eMMC")).
Since we're building and including u-boot in each supported device
image, and this method has been proven to work fine for a64, let's just
change the default u-boot env file to do the same.
Fixes: e6d9f6fdff ("sunxi: add support for FriendlyARM NanoPi R1")
Co-authored-by: Karl Palsson <karlp@etactica.com>
Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
[use UUID in default u-boot env, rewrite commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* firmware-utils: bump to git HEAD
Adds support for building TP-Link CPE605v1 factory images
bd856eff4850 tplink-safeloader: add TP-Link CPE605 v1 Support
Signed-off-by: Sander Vanheule <sander@svanheule.net>
* firmware-utils: fix archive checksum
PKG_SOURCE_DATE was modified after updating PKG_MIRROR_HASH, causing the
latter to change. This results in a warning during builds and rejected
downloads.
Fixes: 232879a7b7f8 ("firmware-utils: bump to git HEAD")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
* libtracefs: update to 1.6.2
378a9dd libtracefs: version 1.6.2
e6daa60 libtracefs: Add unit test to test mounting of tracefs_{tracing,debug}_dir()
32acbbf libtracefs: Have tracefs_{tracing,debug}_dir() mount {tracefs,debugfs} if not mounted
Signed-off-by: Nick Hainke <vincent@systemli.org>
* ethtool: add PKG_CPE_ID
Add CPE ID for tracking CVEs.
Signed-off-by: Nick Hainke <vincent@systemli.org>
* ethtool: update to 6.0
Release Notes:
https://lwn.net/Articles/910841/
Signed-off-by: Nick Hainke <vincent@systemli.org>
* strace: update to 6.1
Release Notes:
https://github.com/strace/strace/releases/tag/v6.1
Signed-off-by: Nick Hainke <vincent@systemli.org>
* trace-cmd: update to v3.1.5
Update to latest release.
Signed-off-by: Nick Hainke <vincent@systemli.org>
* libtraceevent: update to 1.7.0
Update to latest release.
Signed-off-by: Nick Hainke <vincent@systemli.org>
* libtracefs: update to 1.6.3
Update to latest release.
Signed-off-by: Nick Hainke <vincent@systemli.org>
* tools/bash: update to 5.2.15
Update to the latest released version.
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* tools/ccache: update to 4.7.4
Release Notes:
https://ccache.dev/releasenotes.html#_ccache_4_7_3https://ccache.dev/releasenotes.html#_ccache_4_7_4
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* tools/libressl: update to 3.7.0
Release notes:
https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.6.0-relnotes.txthttps://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.6.1-relnotes.txthttps://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.7.0-relnotes.txt
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* tools/mpc: update to 1.3.1
Version 1.3.1 new features:
Bug fix: It is again possible to include mpc.h without including stdio.h.
Version 1.3.0 new features:
New function: mpc_agm
New rounding modes "away from zero", indicated by the letter "A" and corresponding to MPFR_RNDA on the designated real or imaginary part.
New experimental ball arithmetic.
New experimental function: mpc_eta_fund
Bug fixes:
mpc_asin for asin(z) with small |Re(z)| and tiny |Im(z)|
mpc_pow_fr: sign of zero part of result when the base has up to sign the same real and imaginary part, and the exponent is an even positive integer
mpc_fma: the returned int value was incorrect in some cases (indicating whether the rounded real/imaginary parts were smaller/equal/greater than the exact values), but the computed complex value was correct.
Remove the unmaintained Makefile.vc; build files for Visual Studio are maintained independently by Brian Gladman.
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* tools/patchelf: update to 0.17.0
Update to the latest released version.
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Co-authored-by: Sander Vanheule <sander@svanheule.net>
Co-authored-by: Nick Hainke <vincent@systemli.org>
Co-authored-by: Linhui Liu <liulinhui36@gmail.com>
Get rid of drivers that are either limited to 802.11b/g or don't even support
cfg80211/mac80211. Most of these are either limited to boards that we don't even
support anymore because of firmware size, or were only used for custom hacks by
a really small number of users in the past.
Let's get rid of those to reduce the maintenance effort and the number of useless
packages
Signed-off-by: Felix Fietkau <nbd@nbd.name>
libxxhash is now available in the OpenWrt package feed and gdb will link
against it if gdb finds this library. Explicitly deactivate the usage
of xxhash.
This should fix the build of gdb in build bots.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Two WS2812B (NeoPixel) clones are used in Xiaomi Redmi AX6000 as
indicator lights. Add a driver for controlling it using SPI MOSI.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
enable option `CONFIG_CRYPTO_LZ4HC` to match default kernel config
this only adds the `lz4hc_compress` module, and has no effect on the
`lz4_decompress` module which already supports any flavor
Signed-off-by: Tony Butler <spudz76@gmail.com>
