Commit Graph

11 Commits

Author SHA1 Message Date
Arınç ÜNAL
a9d71837e9 ramips: fix GB-PC1 and GB-PC2 device support
Change switch port labels to ethblack & ethblue.
Change lan1 & lan2 LEDs to ethblack_act & ethblue_act and fix GPIO pins.
Add the external phy with ethyellow label on the GB-PC2 devicetree.
Do not claim rgmii2 as gpio, it's used for ethernet with rgmii2 function.
Enable ICPlus PHY driver for IP1001 which GB-PC2 has got.
Update interface name and change netdev function.
Enable lzma compression to make up for the increased size of the kernel.
Make spi flash bindings on par with mainline Linux to fix read errors.

Tested on GB-PC2 by Petr.

Tested-by: Petr Louda <petr.louda@outlook.cz>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
2022-08-30 11:46:22 +08:00
David Bauer
29706161e3 ramips: fix missing NVMEM subsystem
MAC address retrieval was switched to more generic upstream (5.13) NVMEM
based solution in commit 06bb4a5018cd ("ramips: convert mtd-mac-address
to nvmem implementation") , but NVMEM subsystem wasn't enabled in the
kernel, so fix it now.

Fixes: 06bb4a5018cd ("ramips: convert mtd-mac-address to nvmem implementation")
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [commit message]
2022-08-30 11:45:06 +08:00
aodzip
3302e26e94 ramips/mt7621: Add HATLab GateBoard-One Support
Signed-off-by: Aodzip <aodzip@gmail.com>
Signed-off-by: AnYun <amadeus@openjmu.xyz>
2022-08-28 15:50:27 +08:00
AmadeusGhost
c85b4ebbc1 ramips: mt7621: switch to new ethernet driver 2022-06-17 23:54:46 +08:00
csharper2005
7c0b920f18
ramips: Add support for Beeline SmartBox TURBO+ (#8161)
* ramips: add support for Beeline(Sercomm) U-Boot

- Add recipe for several Beeline/Sercomm devices (e.g., Beeline SmartBox
  GIGA, Beeline SmartBox Turbo+, Sercomm S3) that appends special header
  to a kernel.

- Add device variables KERNEL_LOADADDR, LZMA_TEXT_START. It's also
  necessary for the devices mentioned above.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
(cherry picked from commit 6240da24f4c1442b0f750f06be512f630b0bc6c8)
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>

* ramips: Add support for Beeline SmartBox TURBO+

This PR adds support for router Beeline Smart Box TURBO+.
OEM/ODM Serсomm. Almost identical to Serсomm S3.

Specification
-------------
SoC Type: MediaTek MT7621AT (880 MHz, 2 cores)
RAM (Nanya NT5CC64M16GP): 128 MiB
Flash (Macronix MX30LF1G18AC): 128 MiB
Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2
Wireless 5 GHz (MT7615N): a/n/ac, 4x4
Ethernet: 5 ports - 5×GbE (WAN, LAN1-4)
USB ports: 1xUSB3.0
Buttons: 2 button (reset, wps)
LEDs: Red, Green, Blue
Zigbee (EFR32MG1B232GG): 3.0
Stock bootloader: U-Boot 1.1.3
Power: 12 VDC, 1.5 A

Installation
------------
Attach serial console, then boot the initramfs image via TFTP.
Once inside OpenWrt, run sysupgrade -n with the sysupgrade file.

Signed-off-by: Maximilian Weinmann <x1@disroot.org>
(cherry picked from commit d1f294521bd8bc462c76e09c57a5c8b0600170cd)
(factory recipe from a2cfe339995467308c9126c3d0f70d2a28aeb073)
(big NAND from e6e5837a625ba09e286a5bde05f2ce581cfbeab7)
(removed nvmem cells, fixed conflicts)
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>

* ramips: add Sercomm partition map parser

This adds an MTD partition parser for the Sercomm partition table that
is used in some Netgear routers.

This is essentially the same code as proposed in the pull request for
Netgear R6350 support by NOGUCHI Hiroshi <drvlabo@gmail.com>:
https://github.com/openwrt/openwrt/pull/1318

It was originally rejected as it did not seem to work correctly.
However, this was only due the NAND driver transparently shifting pages
to hide bad blocks, which was fixed in commit
527832e54bf3bc4d699a145ae66f34230246f0a9.

Signed-off-by: Jan Hoffmann <jan@3e8.eu>
[x1@disroot.org: correction from checkpatch.pl]
Signed-off-by: Maximilian Weinmann <x1@disroot.org>
(cherry picked from commit 65e772105f8d5e98a999b836fed794b7415f2741)
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>

* ramips: Improve Beeline Smartbox Turbo+ support in lede

Changed switch configuration and a few minor changes.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>

Co-authored-by: Maximilian Weinmann <x1@disroot.org>
Co-authored-by: Jan Hoffmann <jan@3e8.eu>
2021-11-03 12:16:32 +08:00
Boos4721
00eeb609c2
ramips: config refresh (#7984)
Signed-off-by: boos4721 <3.1415926535boos@gmail.com>
2021-10-04 22:25:20 +08:00
AmadeusGhost
6006596973
ramips: mt7621: add back switch support (#7560)
Based-on: https://github.com/x-wrt/x-wrt
2021-07-30 21:39:12 +08:00
coolsnowwolf
3625a73046 ramips: switch to kernel 5.10 2021-07-13 00:37:50 +08:00
lean
7a50383ab6 add kernel 5.10 support and sync with upstream 2021-06-14 18:30:08 +08:00
AmadeusGhost
0635250cda
ramips/mt7621: re-added hwnat support for kernel 5.4 (#5120)
* ramips: mt7621.dtsi: add missing pinctrl to ethernet node

Add rgmii1_pins (1st GMAC) and mdio_pins to ethernet node
pinctrl to ensure they are set to correct mode

* ramips: kernel: ralink-eth support mt7621

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>

* ramips: some devices use ralink-eth driver

Also re-added mt7621 hwnat support for some devices.

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
Signed-off-by: AmadeusGhost <amadeus@openjmu.xyz>

* ramips/mt7621: re-added hwnat support

Co-authored-by: LGA1150 <dqfext@gmail.com>
Co-authored-by: Chen Minqiang <ptpt52@gmail.com>
2020-07-18 01:02:11 +08:00
coolsnowwolf
33abeff31c Sync to snapshot kernel 5.4 version 2020-07-02 23:30:56 +08:00