From ff042839f3a8cb912ef2dc459eec5196c611f4a2 Mon Sep 17 00:00:00 2001 From: coolsnowwolf Date: Sat, 31 Jul 2021 17:09:57 +0800 Subject: [PATCH] ipq806x: fix boot pages ecc I/O error cause booting slow issue --- ...m_nandc-add-boot_layout_mode-support.patch | 239 ++++++++++++++++++ ...vicetree-mtd-qcom_nandc-document-qco.patch | 42 +++ 2 files changed, 281 insertions(+) create mode 100644 target/linux/ipq806x/patches-5.4/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch create mode 100644 target/linux/ipq806x/patches-5.4/099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch diff --git a/target/linux/ipq806x/patches-5.4/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch b/target/linux/ipq806x/patches-5.4/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch new file mode 100644 index 000000000..6106dfb8d --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch @@ -0,0 +1,239 @@ +From 6949d651e3be3ebbfedb6bbd5b541cfda6ee58a9 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 10 Feb 2021 10:40:17 +0100 +Subject: [PATCH 1/2] mtd: nand: raw: qcom_nandc: add boot_layout_mode support + +ipq806x nand have a special ecc configuration for the boot pages. The +use of the non-boot pages configuration on boot pages cause I/O error +and can cause broken data written to the nand. Add support for this +special configuration if the page to be read/write is in the size of the +boot pages set by the dts. + +Signed-off-by: Ansuel Smith +--- + drivers/mtd/nand/raw/qcom_nandc.c | 82 +++++++++++++++++++++++++++++-- + 1 file changed, 77 insertions(+), 5 deletions(-) + +--- a/drivers/mtd/nand/raw/qcom_nandc.c ++++ b/drivers/mtd/nand/raw/qcom_nandc.c +@@ -159,6 +159,11 @@ + /* NAND_CTRL bits */ + #define BAM_MODE_EN BIT(0) + ++ ++#define UD_SIZE_BYTES_MASK (0x3ff << UD_SIZE_BYTES) ++#define SPARE_SIZE_BYTES_MASK (0xf << SPARE_SIZE_BYTES) ++#define ECC_NUM_DATA_BYTES_MASK (0x3ff << ECC_NUM_DATA_BYTES) ++ + /* + * the NAND controller performs reads/writes with ECC in 516 byte chunks. + * the driver calls the chunks 'step' or 'codeword' interchangeably +@@ -430,6 +435,13 @@ struct qcom_nand_controller { + * @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for + * ecc/non-ecc mode for the current nand flash + * device ++ * ++ * @boot_pages_conf: keep track of the current ecc configuration used by ++ * the driver for read/write operation. (boot pages ++ * have different configuration than normal page) ++ * @boot_pages: number of pages starting from 0 used as boot pages ++ * where the driver will use the boot pages ecc ++ * configuration for read/write operation + */ + struct qcom_nand_host { + struct nand_chip chip; +@@ -452,6 +464,9 @@ struct qcom_nand_host { + u32 ecc_bch_cfg; + u32 clrflashstatus; + u32 clrreadstatus; ++ ++ bool boot_pages_conf; ++ u32 boot_pages; + }; + + /* +@@ -460,12 +475,14 @@ struct qcom_nand_host { + * @ecc_modes - ecc mode for NAND + * @is_bam - whether NAND controller is using BAM + * @is_qpic - whether NAND CTRL is part of qpic IP ++ * @has_boot_pages - whether NAND has different ecc settings for boot pages + * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset + */ + struct qcom_nandc_props { + u32 ecc_modes; + bool is_bam; + bool is_qpic; ++ bool has_boot_pages; + u32 dev_cmd_reg_start; + }; + +@@ -1604,7 +1621,7 @@ qcom_nandc_read_cw_raw(struct mtd_info * + data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1); + oob_size1 = host->bbm_size; + +- if (cw == (ecc->steps - 1)) { ++ if (cw == (ecc->steps - 1) && !host->boot_pages_conf) { + data_size2 = ecc->size - data_size1 - + ((ecc->steps - 1) * 4); + oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw + +@@ -1685,7 +1702,7 @@ check_for_erased_page(struct qcom_nand_h + } + + for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) { +- if (cw == (ecc->steps - 1)) { ++ if (cw == (ecc->steps - 1) && !host->boot_pages_conf) { + data_size = ecc->size - ((ecc->steps - 1) * 4); + oob_size = (ecc->steps * 4) + host->ecc_bytes_hw; + } else { +@@ -1844,7 +1861,7 @@ static int read_page_ecc(struct qcom_nan + for (i = 0; i < ecc->steps; i++) { + int data_size, oob_size; + +- if (i == (ecc->steps - 1)) { ++ if (i == (ecc->steps - 1) && !host->boot_pages_conf) { + data_size = ecc->size - ((ecc->steps - 1) << 2); + oob_size = (ecc->steps << 2) + host->ecc_bytes_hw + + host->spare_bytes; +@@ -1941,6 +1958,30 @@ static int copy_last_cw(struct qcom_nand + return ret; + } + ++static void ++check_boot_pages_conf(struct qcom_nand_host *host, int page) ++{ ++ bool boot_pages_conf = page < host->boot_pages; ++ ++ /* Skip conf write if we are already in the correct mode */ ++ if (boot_pages_conf != host->boot_pages_conf) { ++ host->boot_pages_conf = boot_pages_conf; ++ ++ host->cw_data = boot_pages_conf ? 512 : 516; ++ host->spare_bytes = host->cw_size - host->ecc_bytes_hw - ++ host->bbm_size - host->cw_data; ++ ++ host->cfg0 &= ~(SPARE_SIZE_BYTES_MASK | UD_SIZE_BYTES_MASK); ++ host->cfg0 |= host->spare_bytes << SPARE_SIZE_BYTES | ++ host->cw_data << UD_SIZE_BYTES; ++ ++ host->ecc_bch_cfg &= ~ECC_NUM_DATA_BYTES_MASK; ++ host->ecc_bch_cfg |= host->cw_data << ECC_NUM_DATA_BYTES; ++ host->ecc_buf_cfg = (boot_pages_conf ? 0x1ff : 0x203) << ++ NUM_STEPS; ++ } ++} ++ + /* implements ecc->read_page() */ + static int qcom_nandc_read_page(struct nand_chip *chip, uint8_t *buf, + int oob_required, int page) +@@ -1949,6 +1990,9 @@ static int qcom_nandc_read_page(struct n + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + u8 *data_buf, *oob_buf = NULL; + ++ if (host->boot_pages) ++ check_boot_pages_conf(host, page); ++ + nand_read_page_op(chip, page, 0, NULL, 0); + data_buf = buf; + oob_buf = oob_required ? chip->oob_poi : NULL; +@@ -1968,6 +2012,9 @@ static int qcom_nandc_read_page_raw(stru + int cw, ret; + u8 *data_buf = buf, *oob_buf = chip->oob_poi; + ++ if (host->boot_pages) ++ check_boot_pages_conf(host, page); ++ + for (cw = 0; cw < ecc->steps; cw++) { + ret = qcom_nandc_read_cw_raw(mtd, chip, data_buf, oob_buf, + page, cw); +@@ -1988,6 +2035,9 @@ static int qcom_nandc_read_oob(struct na + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + ++ if (host->boot_pages) ++ check_boot_pages_conf(host, page); ++ + clear_read_regs(nandc); + clear_bam_transaction(nandc); + +@@ -2008,6 +2058,9 @@ static int qcom_nandc_write_page(struct + u8 *data_buf, *oob_buf; + int i, ret; + ++ if (host->boot_pages) ++ check_boot_pages_conf(host, page); ++ + nand_prog_page_begin_op(chip, page, 0, NULL, 0); + + clear_read_regs(nandc); +@@ -2023,7 +2076,7 @@ static int qcom_nandc_write_page(struct + for (i = 0; i < ecc->steps; i++) { + int data_size, oob_size; + +- if (i == (ecc->steps - 1)) { ++ if (i == (ecc->steps - 1) && !host->boot_pages_conf) { + data_size = ecc->size - ((ecc->steps - 1) << 2); + oob_size = (ecc->steps << 2) + host->ecc_bytes_hw + + host->spare_bytes; +@@ -2080,6 +2133,9 @@ static int qcom_nandc_write_page_raw(str + u8 *data_buf, *oob_buf; + int i, ret; + ++ if (host->boot_pages) ++ check_boot_pages_conf(host, page); ++ + nand_prog_page_begin_op(chip, page, 0, NULL, 0); + clear_read_regs(nandc); + clear_bam_transaction(nandc); +@@ -2098,7 +2154,7 @@ static int qcom_nandc_write_page_raw(str + data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1); + oob_size1 = host->bbm_size; + +- if (i == (ecc->steps - 1)) { ++ if (i == (ecc->steps - 1) && !host->boot_pages_conf) { + data_size2 = ecc->size - data_size1 - + ((ecc->steps - 1) << 2); + oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw + +@@ -2158,6 +2214,9 @@ static int qcom_nandc_write_oob(struct n + int data_size, oob_size; + int ret; + ++ if (host->boot_pages) ++ check_boot_pages_conf(host, page); ++ + host->use_ecc = true; + clear_bam_transaction(nandc); + +@@ -2806,6 +2865,7 @@ static int qcom_nand_host_init_and_regis + struct nand_chip *chip = &host->chip; + struct mtd_info *mtd = nand_to_mtd(chip); + struct device *dev = nandc->dev; ++ u32 boot_pages_size; + int ret; + + ret = of_property_read_u32(dn, "reg", &host->cs); +@@ -2866,6 +2926,17 @@ static int qcom_nand_host_init_and_regis + if (ret) + nand_cleanup(chip); + ++ if (nandc->props->has_boot_pages && ++ of_property_read_bool(dn, "nand-is-boot-medium")) { ++ ret = of_property_read_u32(dn, "qcom,boot_pages_size", ++ &boot_pages_size); ++ if (ret) ++ dev_warn(dev, "can't get boot pages size"); ++ else ++ /* Convert size to nand pages */ ++ host->boot_pages = boot_pages_size / mtd->writesize; ++ } ++ + return ret; + } + +@@ -3032,6 +3103,7 @@ static int qcom_nandc_remove(struct plat + static const struct qcom_nandc_props ipq806x_nandc_props = { + .ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT), + .is_bam = false, ++ .has_boot_pages = true, + .dev_cmd_reg_start = 0x0, + }; + diff --git a/target/linux/ipq806x/patches-5.4/099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch b/target/linux/ipq806x/patches-5.4/099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch new file mode 100644 index 000000000..79036cb05 --- /dev/null +++ b/target/linux/ipq806x/patches-5.4/099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch @@ -0,0 +1,42 @@ +From 6fb003a7a117f97a35b078ba726c84adeae29c4c Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 10 Feb 2021 10:54:19 +0100 +Subject: [PATCH 2/2] Documentation: devicetree: mtd: qcom_nandc: document + qcom,boot_layout_size binding + +Document new qcom,boot_layout_size binding used to apply special +read/write confituation to boots partitions. + +Signed-off-by: Ansuel Smith +--- + Documentation/devicetree/bindings/mtd/qcom_nandc.txt | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt ++++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt +@@ -52,6 +52,15 @@ Optional properties: + be used according to chip requirement and available + OOB size. + ++EBI2 specific properties: ++- nand-is-boot-medium: nand contains boot partitions and different ecc configuration ++ should be used for these partitions. ++- qcom,boot_pages_size: should contain the size of the total boot partitions ++ where the boot layout read/write specific configuration ++ should be used. The boot layout is considered from the ++ start of the nand to the value set in this binding. ++ Only used in combination with 'nand-is-boot-medium'. ++ + Each nandcs device node may optionally contain a 'partitions' sub-node, which + further contains sub-nodes describing the flash partition mapping. See + partition.txt for more detail. +@@ -80,6 +89,9 @@ nand-controller@1ac00000 { + nand-ecc-strength = <4>; + nand-bus-width = <8>; + ++ nand-is-boot-medium; ++ qcom,boot_pages_size: <0x58a0000>; ++ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>;