mirror of
https://github.com/coolsnowwolf/lede.git
synced 2025-04-16 04:13:31 +00:00
rockchip:fix rk3399 build with kernel 5.15
This commit is contained in:
lean
parent
1c96c4ace0
commit
f449543c7f
@ -0,0 +1,60 @@
|
||||
From 0fc3b9b7619c4878f73a6a7989863f0d1a3fd392 Mon Sep 17 00:00:00 2001
|
||||
From: David Bauer <mail@david-bauer.net>
|
||||
Date: Fri, 10 Jul 2020 21:12:16 +0200
|
||||
Subject: [PATCH] rockchip: enabled LAN port on NanoPi R2S
|
||||
|
||||
Enable the USB3 port on the FriendlyARM NanoPi R2S.
|
||||
This is required for the USB3 attached LAN port to work.
|
||||
|
||||
Signed-off-by: David Bauer <mail@david-bauer.net>
|
||||
---
|
||||
.../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 27 +++++++++++++++++++
|
||||
1 file changed, 27 insertions(+)
|
||||
|
||||
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
|
||||
@@ -44,6 +44,18 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ vcc_rtl8153: vcc-rtl8153-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&rtl8153_en_drv>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-name = "vcc_rtl8153";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
|
||||
@@ -273,6 +285,12 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+ usb {
|
||||
+ rtl8153_en_drv: rtl8153-en-drv {
|
||||
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
@@ -379,3 +397,12 @@
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
+
|
||||
+&usbdrd3 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbdrd_dwc3 {
|
||||
+ dr_mode = "host";
|
||||
+ status = "okay";
|
||||
+};
|
||||
@ -0,0 +1,768 @@
|
||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||||
@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-li
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-doornet2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3399-doornet2.dts
|
||||
@@ -0,0 +1,115 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+
|
||||
+/dts-v1/;
|
||||
+#include "rk3399-doornet2.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "EmbedFire DoorNet2";
|
||||
+ compatible = "embedfire,doornet2", "rockchip,rk3399";
|
||||
+
|
||||
+ aliases {
|
||||
+ led-boot = &sys_led;
|
||||
+ led-failsafe = &sys_led;
|
||||
+ led-running = &sys_led;
|
||||
+ led-upgrade = &sys_led;
|
||||
+ };
|
||||
+
|
||||
+ /delete-node/ display-subsystem;
|
||||
+
|
||||
+ gpio-leds {
|
||||
+ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
|
||||
+
|
||||
+ /delete-node/ status;
|
||||
+
|
||||
+ lan_led: led-lan {
|
||||
+ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||||
+ label = "green:lan";
|
||||
+ };
|
||||
+
|
||||
+ sys_led: led-sys {
|
||||
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
+ label = "red:sys";
|
||||
+ default-state = "on";
|
||||
+ };
|
||||
+
|
||||
+ wan_led: led-wan {
|
||||
+ gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
+ label = "green:wan";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio-keys {
|
||||
+ pinctrl-0 = <&reset_button_pin>;
|
||||
+
|
||||
+ /delete-node/ power;
|
||||
+
|
||||
+ reset {
|
||||
+ debounce-interval = <50>;
|
||||
+ gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
|
||||
+ label = "reset";
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_5v: vdd-5v {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vdd_5v";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pcie0 {
|
||||
+ max-link-speed = <1>;
|
||||
+ num-lanes = <1>;
|
||||
+ vpcie3v3-supply = <&vcc3v3_sys>;
|
||||
+
|
||||
+ pcie@0 {
|
||||
+ reg = <0x00000000 0 0 0 0>;
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+
|
||||
+ pcie-eth@0,0 {
|
||||
+ compatible = "realtek,r8168";
|
||||
+ reg = <0x000000 0 0 0 0>;
|
||||
+
|
||||
+ realtek,led-data = <0x870>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pinctrl {
|
||||
+ gpio-leds {
|
||||
+ /delete-node/ leds-gpio;
|
||||
+
|
||||
+ lan_led_pin: lan-led-pin {
|
||||
+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ sys_led_pin: sys-led-pin {
|
||||
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ wan_led_pin: wan-led-pin {
|
||||
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ rockchip-key {
|
||||
+ /delete-node/ power-key;
|
||||
+
|
||||
+ reset_button_pin: reset-button-pin {
|
||||
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&u2phy0_host {
|
||||
+ phy-supply = <&vdd_5v>;
|
||||
+};
|
||||
+
|
||||
+&vcc3v3_sys {
|
||||
+ vin-supply = <&vcc5v0_sys>;
|
||||
+};
|
||||
+
|
||||
+
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3399-doornet2.dtsi
|
||||
@@ -0,0 +1,637 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+
|
||||
+/dts-v1/;
|
||||
+#include <dt-bindings/input/linux-event-codes.h>
|
||||
+#include "rk3399.dtsi"
|
||||
+#include "rk3399-opp.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ chosen {
|
||||
+ stdout-path = "serial2:1500000n8";
|
||||
+ };
|
||||
+
|
||||
+ clkin_gmac: external-gmac-clock {
|
||||
+ compatible = "fixed-clock";
|
||||
+ clock-frequency = <125000000>;
|
||||
+ clock-output-names = "clkin_gmac";
|
||||
+ #clock-cells = <0>;
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_sys: vcc3v3-sys {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-name = "vcc3v3_sys";
|
||||
+ };
|
||||
+
|
||||
+ vcc5v0_sys: vcc5v0-sys {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ regulator-name = "vcc5v0_sys";
|
||||
+ vin-supply = <&vdd_5v>;
|
||||
+ };
|
||||
+
|
||||
+ /* switched by pmic_sleep */
|
||||
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-name = "vcc1v8_s3";
|
||||
+ vin-supply = <&vcc_1v8>;
|
||||
+ };
|
||||
+
|
||||
+ vcc3v0_sd: vcc3v0-sd {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ enable-active-high;
|
||||
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdmmc0_pwr_h>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-min-microvolt = <3000000>;
|
||||
+ regulator-max-microvolt = <3000000>;
|
||||
+ regulator-name = "vcc3v0_sd";
|
||||
+ vin-supply = <&vcc3v3_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vbus_typec: vbus-typec {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ regulator-name = "vbus_typec";
|
||||
+ };
|
||||
+
|
||||
+ gpio-keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+ autorepeat;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&power_key>;
|
||||
+
|
||||
+ power {
|
||||
+ debounce-interval = <100>;
|
||||
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
+ label = "GPIO Key Power";
|
||||
+ linux,code = <KEY_POWER>;
|
||||
+ wakeup-source;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ leds: gpio-leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&leds_gpio>;
|
||||
+
|
||||
+ status {
|
||||
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
+ label = "status_led";
|
||||
+ linux,default-trigger = "heartbeat";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ sdio_pwrseq: sdio-pwrseq {
|
||||
+ compatible = "mmc-pwrseq-simple";
|
||||
+ clocks = <&rk808 1>;
|
||||
+ clock-names = "ext_clock";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&wifi_reg_on_h>;
|
||||
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&cpu_b0 {
|
||||
+ cpu-supply = <&vdd_cpu_b>;
|
||||
+};
|
||||
+
|
||||
+&cpu_b1 {
|
||||
+ cpu-supply = <&vdd_cpu_b>;
|
||||
+};
|
||||
+
|
||||
+&cpu_l0 {
|
||||
+ cpu-supply = <&vdd_cpu_l>;
|
||||
+};
|
||||
+
|
||||
+&cpu_l1 {
|
||||
+ cpu-supply = <&vdd_cpu_l>;
|
||||
+};
|
||||
+
|
||||
+&cpu_l2 {
|
||||
+ cpu-supply = <&vdd_cpu_l>;
|
||||
+};
|
||||
+
|
||||
+&cpu_l3 {
|
||||
+ cpu-supply = <&vdd_cpu_l>;
|
||||
+};
|
||||
+
|
||||
+&emmc_phy {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&gmac {
|
||||
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
+ assigned-clock-parents = <&clkin_gmac>;
|
||||
+ clock_in_out = "input";
|
||||
+ phy-supply = <&vcc3v3_s3>;
|
||||
+ phy-mode = "rgmii";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&rgmii_pins>;
|
||||
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
+ snps,reset-active-low;
|
||||
+ snps,reset-delays-us = <0 100000 50000>;
|
||||
+ tx_delay = <0x13>;
|
||||
+ rx_delay = <0x0e>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&gpu {
|
||||
+ mali-supply = <&vdd_gpu>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi {
|
||||
+ ddc-i2c-bus = <&i2c7>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&hdmi_cec>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&i2c0 {
|
||||
+ clock-frequency = <400000>;
|
||||
+ i2c-scl-rising-time-ns = <160>;
|
||||
+ i2c-scl-falling-time-ns = <30>;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ vdd_cpu_b: regulator@40 {
|
||||
+ compatible = "silergy,syr827";
|
||||
+ reg = <0x40>;
|
||||
+ fcs,suspend-voltage-selector = <1>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&cpu_b_sleep>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <712500>;
|
||||
+ regulator-max-microvolt = <1500000>;
|
||||
+ regulator-name = "vdd_cpu_b";
|
||||
+ regulator-ramp-delay = <1000>;
|
||||
+ vin-supply = <&vcc3v3_sys>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_gpu: regulator@41 {
|
||||
+ compatible = "silergy,syr828";
|
||||
+ reg = <0x41>;
|
||||
+ fcs,suspend-voltage-selector = <1>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&gpu_sleep>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <712500>;
|
||||
+ regulator-max-microvolt = <1500000>;
|
||||
+ regulator-name = "vdd_gpu";
|
||||
+ regulator-ramp-delay = <1000>;
|
||||
+ vin-supply = <&vcc3v3_sys>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ rk808: pmic@1b {
|
||||
+ compatible = "rockchip,rk808";
|
||||
+ reg = <0x1b>;
|
||||
+ clock-output-names = "xin32k", "rtc_clko_wifi";
|
||||
+ #clock-cells = <1>;
|
||||
+ interrupt-parent = <&gpio1>;
|
||||
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pmic_int_l>;
|
||||
+ rockchip,system-power-controller;
|
||||
+ wakeup-source;
|
||||
+
|
||||
+ vcc1-supply = <&vcc3v3_sys>;
|
||||
+ vcc2-supply = <&vcc3v3_sys>;
|
||||
+ vcc3-supply = <&vcc3v3_sys>;
|
||||
+ vcc4-supply = <&vcc3v3_sys>;
|
||||
+ vcc6-supply = <&vcc3v3_sys>;
|
||||
+ vcc7-supply = <&vcc3v3_sys>;
|
||||
+ vcc8-supply = <&vcc3v3_sys>;
|
||||
+ vcc9-supply = <&vcc3v3_sys>;
|
||||
+ vcc10-supply = <&vcc3v3_sys>;
|
||||
+ vcc11-supply = <&vcc3v3_sys>;
|
||||
+ vcc12-supply = <&vcc3v3_sys>;
|
||||
+ vddio-supply = <&vcc_3v0>;
|
||||
+
|
||||
+ regulators {
|
||||
+ vdd_center: DCDC_REG1 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <750000>;
|
||||
+ regulator-max-microvolt = <1350000>;
|
||||
+ regulator-name = "vdd_center";
|
||||
+ regulator-ramp-delay = <6001>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_cpu_l: DCDC_REG2 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <750000>;
|
||||
+ regulator-max-microvolt = <1350000>;
|
||||
+ regulator-name = "vdd_cpu_l";
|
||||
+ regulator-ramp-delay = <6001>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_ddr: DCDC_REG3 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-name = "vcc_ddr";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_1v8: DCDC_REG4 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-name = "vcc_1v8";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <1800000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc1v8_cam: LDO_REG1 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-name = "vcc1v8_cam";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc3v0_touch: LDO_REG2 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3000000>;
|
||||
+ regulator-max-microvolt = <3000000>;
|
||||
+ regulator-name = "vcc3v0_touch";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc1v8_pmupll: LDO_REG3 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-name = "vcc1v8_pmupll";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <1800000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_sdio: LDO_REG4 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-init-microvolt = <3000000>;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-name = "vcc_sdio";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <3000000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcca3v0_codec: LDO_REG5 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3000000>;
|
||||
+ regulator-max-microvolt = <3000000>;
|
||||
+ regulator-name = "vcca3v0_codec";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_1v5: LDO_REG6 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1500000>;
|
||||
+ regulator-max-microvolt = <1500000>;
|
||||
+ regulator-name = "vcc_1v5";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <1500000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcca1v8_codec: LDO_REG7 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-name = "vcca1v8_codec";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_3v0: LDO_REG8 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3000000>;
|
||||
+ regulator-max-microvolt = <3000000>;
|
||||
+ regulator-name = "vcc_3v0";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <3000000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_s3: SWITCH_REG1 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-name = "vcc3v3_s3";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_s0: SWITCH_REG2 {
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-name = "vcc3v3_s0";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&i2c1 {
|
||||
+ clock-frequency = <200000>;
|
||||
+ i2c-scl-rising-time-ns = <150>;
|
||||
+ i2c-scl-falling-time-ns = <30>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&i2c2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&i2c7 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&io_domains {
|
||||
+ bt656-supply = <&vcc_1v8>;
|
||||
+ audio-supply = <&vcca1v8_codec>;
|
||||
+ sdmmc-supply = <&vcc_sdio>;
|
||||
+ gpio1830-supply = <&vcc_3v0>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pcie_phy {
|
||||
+ assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
|
||||
+ assigned-clock-rates = <100000000>;
|
||||
+ assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pcie0 {
|
||||
+ ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
+ max-link-speed = <2>;
|
||||
+ num-lanes = <4>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pinctrl {
|
||||
+ fusb30x {
|
||||
+ fusb0_int: fusb0-int {
|
||||
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio-leds {
|
||||
+ leds_gpio: leds-gpio {
|
||||
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ ethernet-phy {
|
||||
+ eth_phy_reset_pin: eth-phy-reset-pin {
|
||||
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pmic {
|
||||
+ cpu_b_sleep: cpu-b-sleep {
|
||||
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
+ };
|
||||
+
|
||||
+ gpu_sleep: gpu-sleep {
|
||||
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
+ };
|
||||
+
|
||||
+ pmic_int_l: pmic-int-l {
|
||||
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ rockchip-key {
|
||||
+ power_key: power-key {
|
||||
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ sdio {
|
||||
+ bt_host_wake_l: bt-host-wake-l {
|
||||
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ bt_reg_on_h: bt-reg-on-h {
|
||||
+ /* external pullup to VCC1V8_PMUPLL */
|
||||
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ bt_wake_l: bt-wake-l {
|
||||
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ wifi_reg_on_h: wifi-reg_on-h {
|
||||
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ sdmmc {
|
||||
+ sdmmc0_det_l: sdmmc0-det-l {
|
||||
+ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
+
|
||||
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
|
||||
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pmu_io_domains {
|
||||
+ pmu1830-supply = <&vcc_3v0>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pwm1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&saradc {
|
||||
+ vref-supply = <&vcca1v8_s3>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sdhci {
|
||||
+ bus-width = <8>;
|
||||
+ mmc-ddr-1_8v;
|
||||
+ mmc-hs200-1_8v;
|
||||
+ non-removable;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sdmmc {
|
||||
+ bus-width = <4>;
|
||||
+ cap-sd-highspeed;
|
||||
+ cap-mmc-highspeed;
|
||||
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
+ disable-wp;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
|
||||
+ sd-uhs-sdr104;
|
||||
+ vmmc-supply = <&vcc3v0_sd>;
|
||||
+ vqmmc-supply = <&vcc_sdio>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&tcphy0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&tcphy1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&tsadc {
|
||||
+ /* tshut mode 0:CRU 1:GPIO */
|
||||
+ rockchip,hw-tshut-mode = <1>;
|
||||
+ /* tshut polarity 0:LOW 1:HIGH */
|
||||
+ rockchip,hw-tshut-polarity = <1>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&u2phy0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&u2phy0_host {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&u2phy0_otg {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&u2phy1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&u2phy1_otg {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbdrd3_0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbdrd3_1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbdrd_dwc3_0 {
|
||||
+ dr_mode = "host";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbdrd_dwc3_1 {
|
||||
+ dr_mode = "host";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host0_ehci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host0_ohci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host1_ehci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host1_ohci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vopb {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vopb_mmu {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vopl {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vopl_mmu {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
@ -0,0 +1,101 @@
|
||||
From 9f0bfe430a5a67b34bc2274a898b4375a321810b Mon Sep 17 00:00:00 2001
|
||||
From: baiywt <baiywt_gj@163.com>
|
||||
Date: Mon, 15 Nov 2021 16:51:43 +0800
|
||||
Subject: [PATCH] Add support for OrangePi R1 Plus LTS
|
||||
|
||||
---
|
||||
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
||||
.../rockchip/rk3328-orangepi-r1-plus-lts.dts | 44 +++++++++++++++++++
|
||||
2 files changed, 45 insertions(+)
|
||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
|
||||
|
||||
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
|
||||
index 23373c752..552d97555 100644
|
||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||||
@@ -5,6 +5,7 @@
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
|
||||
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
|
||||
new file mode 100644
|
||||
index 000000000..c65f7c417
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
|
||||
@@ -0,0 +1,70 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+#include "rk3328-orangepi-r1-plus.dts"
|
||||
+
|
||||
+/ {
|
||||
+ model = "Xunlong Orange Pi R1 Plus LTS";
|
||||
+ compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328";
|
||||
+};
|
||||
+
|
||||
+/delete-node/ &rtl8211e;
|
||||
+&gmac2io {
|
||||
+ phy-handle = <ðphy3>;
|
||||
+ snps,reset-delays-us = <0 15000 50000>;
|
||||
+ tx_delay = <0x19>;
|
||||
+ rx_delay = <0x05>;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ mdio {
|
||||
+ compatible = "snps,dwmac-mdio";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ ethphy3: ethernet-phy@0 {
|
||||
+ reg = <0x0>;
|
||||
+ keep-clkout-on;
|
||||
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&sdmmc {
|
||||
+ bus-width = <4>;
|
||||
+ cap-sd-highspeed;
|
||||
+ disable-wp;
|
||||
+ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
|
||||
+ pinctrl-names = "default";
|
||||
+ sd-uhs-sdr12;
|
||||
+ sd-uhs-sdr25;
|
||||
+ sd-uhs-sdr50;
|
||||
+ sd-uhs-sdr104;
|
||||
+ vmmc-supply = <&vcc_sd>;
|
||||
+ vqmmc-supply = <&vcc_io_sdio>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&dmc_opp_table {
|
||||
+ opp-1056000000 {
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+ opp-924000000 {
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+ opp-840000000 {
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+ opp-798000000 {
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&sys_led {
|
||||
+ label = "orangepi-r1-plus-lts:red:sys";
|
||||
+};
|
||||
+
|
||||
+&wan_led {
|
||||
+ label = "orangepi-r1-plus-lts:green:wan";
|
||||
+};
|
||||
+
|
||||
+&lan_led {
|
||||
+ label = "orangepi-r1-plus-lts:green:lan";
|
||||
+};
|
||||
--
|
||||
2.25.1
|
||||
@ -0,0 +1,41 @@
|
||||
From faa767a9d0ced5642da0ae50b53d87de258f9525 Mon Sep 17 00:00:00 2001
|
||||
From: hmz007 <hmz007@gmail.com>
|
||||
Date: Tue, 19 Nov 2019 17:24:30 +0800
|
||||
Subject: [PATCH] phy: rockchip: add driver for Rockchip USB 3.0 PHY
|
||||
|
||||
Signed-off-by: hmz007 <hmz007@gmail.com>
|
||||
---
|
||||
drivers/phy/rockchip/Kconfig | 8 +
|
||||
drivers/phy/rockchip/Makefile | 1 +
|
||||
drivers/phy/rockchip/phy-rockchip-inno-usb3.c | 1175 +++++++++++++++++
|
||||
3 files changed, 1184 insertions(+)
|
||||
create mode 100644 drivers/phy/rockchip/phy-rockchip-inno-usb3.c
|
||||
|
||||
--- a/drivers/phy/rockchip/Kconfig
|
||||
+++ b/drivers/phy/rockchip/Kconfig
|
||||
@@ -56,6 +56,15 @@ config PHY_ROCKCHIP_INNO_DSIDPHY
|
||||
Enable this to support the Rockchip MIPI/LVDS/TTL PHY with
|
||||
Innosilicon IP block.
|
||||
|
||||
+config PHY_ROCKCHIP_INNO_USB3
|
||||
+ tristate "Rockchip INNO USB 3.0 PHY Driver"
|
||||
+ depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
|
||||
+ depends on USB_SUPPORT
|
||||
+ select GENERIC_PHY
|
||||
+ select USB_PHY
|
||||
+ help
|
||||
+ Support for Rockchip USB 3.0 PHY with Innosilicon IP block.
|
||||
+
|
||||
config PHY_ROCKCHIP_PCIE
|
||||
tristate "Rockchip PCIe PHY Driver"
|
||||
depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
|
||||
--- a/drivers/phy/rockchip/Makefile
|
||||
+++ b/drivers/phy/rockchip/Makefile
|
||||
@@ -5,6 +5,7 @@ obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-
|
||||
obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY) += phy-rockchip-inno-dsidphy.o
|
||||
obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o
|
||||
obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
|
||||
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB3) += phy-rockchip-inno-usb3.o
|
||||
obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
|
||||
obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
|
||||
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
|
||||
@ -0,0 +1,193 @@
|
||||
From 04202df5cb497b1934c95211cf43784ef62245a4 Mon Sep 17 00:00:00 2001
|
||||
From: Tianling Shen <cnsztl@gmail.com>
|
||||
Date: Sat, 19 Dec 2020 12:42:27 +0000
|
||||
Subject: [PATCH] rockchip: rk3399: overclock to 2.2/1.8 GHz for NanoPi4 devices
|
||||
|
||||
It's stable enough to overclock cpu frequency to 2.2/1.8 GHz,
|
||||
and for better performance.
|
||||
|
||||
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
|
||||
Co-authored-by: gzelvis <gzelvis@gmail.com>
|
||||
---
|
||||
.../boot/dts/rockchip/rk3399-nanopi4-opp.dtsi | 156 ++++++++++++++++++
|
||||
.../boot/dts/rockchip/rk3399-nanopi4.dtsi | 2 +-
|
||||
2 files changed, 157 insertions(+), 1 deletion(-)
|
||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi4-opp.dtsi
|
||||
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4-opp.dtsi
|
||||
@@ -0,0 +1,152 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+/*
|
||||
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
|
||||
+ *
|
||||
+ * Copyright (c) 2020 Tianling Shen <cnsztl@gmail.com>
|
||||
+ * Copyright (c) 2020 gzelvis <gzelvis@gmail.com>
|
||||
+ */
|
||||
+
|
||||
+/ {
|
||||
+ cluster0_opp: opp-table0 {
|
||||
+ compatible = "operating-points-v2";
|
||||
+ opp-shared;
|
||||
+
|
||||
+ opp00 {
|
||||
+ opp-hz = /bits/ 64 <408000000>;
|
||||
+ opp-microvolt = <800000>;
|
||||
+ clock-latency-ns = <40000>;
|
||||
+ };
|
||||
+ opp01 {
|
||||
+ opp-hz = /bits/ 64 <600000000>;
|
||||
+ opp-microvolt = <800000>;
|
||||
+ };
|
||||
+ opp02 {
|
||||
+ opp-hz = /bits/ 64 <816000000>;
|
||||
+ opp-microvolt = <850000>;
|
||||
+ };
|
||||
+ opp03 {
|
||||
+ opp-hz = /bits/ 64 <1008000000>;
|
||||
+ opp-microvolt = <925000>;
|
||||
+ };
|
||||
+ opp04 {
|
||||
+ opp-hz = /bits/ 64 <1200000000>;
|
||||
+ opp-microvolt = <1000000>;
|
||||
+ };
|
||||
+ opp05 {
|
||||
+ opp-hz = /bits/ 64 <1416000000>;
|
||||
+ opp-microvolt = <1125000>;
|
||||
+ };
|
||||
+ opp06 {
|
||||
+ opp-hz = /bits/ 64 <1608000000>;
|
||||
+ opp-microvolt = <1225000>;
|
||||
+ };
|
||||
+ opp07 {
|
||||
+ opp-hz = /bits/ 64 <1800000000>;
|
||||
+ opp-microvolt = <1275000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ cluster1_opp: opp-table1 {
|
||||
+ compatible = "operating-points-v2";
|
||||
+ opp-shared;
|
||||
+
|
||||
+ opp00 {
|
||||
+ opp-hz = /bits/ 64 <408000000>;
|
||||
+ opp-microvolt = <800000>;
|
||||
+ clock-latency-ns = <40000>;
|
||||
+ };
|
||||
+ opp01 {
|
||||
+ opp-hz = /bits/ 64 <600000000>;
|
||||
+ opp-microvolt = <800000>;
|
||||
+ };
|
||||
+ opp02 {
|
||||
+ opp-hz = /bits/ 64 <816000000>;
|
||||
+ opp-microvolt = <825000>;
|
||||
+ };
|
||||
+ opp03 {
|
||||
+ opp-hz = /bits/ 64 <1008000000>;
|
||||
+ opp-microvolt = <875000>;
|
||||
+ };
|
||||
+ opp04 {
|
||||
+ opp-hz = /bits/ 64 <1200000000>;
|
||||
+ opp-microvolt = <950000>;
|
||||
+ };
|
||||
+ opp05 {
|
||||
+ opp-hz = /bits/ 64 <1416000000>;
|
||||
+ opp-microvolt = <1025000>;
|
||||
+ };
|
||||
+ opp06 {
|
||||
+ opp-hz = /bits/ 64 <1608000000>;
|
||||
+ opp-microvolt = <1100000>;
|
||||
+ };
|
||||
+ opp07 {
|
||||
+ opp-hz = /bits/ 64 <1800000000>;
|
||||
+ opp-microvolt = <1200000>;
|
||||
+ };
|
||||
+ opp08 {
|
||||
+ opp-hz = /bits/ 64 <2016000000>;
|
||||
+ opp-microvolt = <1250000>;
|
||||
+ };
|
||||
+ opp09 {
|
||||
+ opp-hz = /bits/ 64 <2208000000>;
|
||||
+ opp-microvolt = <1325000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpu_opp_table: opp-table2 {
|
||||
+ compatible = "operating-points-v2";
|
||||
+
|
||||
+ opp00 {
|
||||
+ opp-hz = /bits/ 64 <200000000>;
|
||||
+ opp-microvolt = <800000>;
|
||||
+ };
|
||||
+ opp01 {
|
||||
+ opp-hz = /bits/ 64 <297000000>;
|
||||
+ opp-microvolt = <800000>;
|
||||
+ };
|
||||
+ opp02 {
|
||||
+ opp-hz = /bits/ 64 <400000000>;
|
||||
+ opp-microvolt = <825000>;
|
||||
+ };
|
||||
+ opp03 {
|
||||
+ opp-hz = /bits/ 64 <500000000>;
|
||||
+ opp-microvolt = <875000>;
|
||||
+ };
|
||||
+ opp04 {
|
||||
+ opp-hz = /bits/ 64 <600000000>;
|
||||
+ opp-microvolt = <925000>;
|
||||
+ };
|
||||
+ opp05 {
|
||||
+ opp-hz = /bits/ 64 <800000000>;
|
||||
+ opp-microvolt = <1100000>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&cpu_l0 {
|
||||
+ operating-points-v2 = <&cluster0_opp>;
|
||||
+};
|
||||
+
|
||||
+&cpu_l1 {
|
||||
+ operating-points-v2 = <&cluster0_opp>;
|
||||
+};
|
||||
+
|
||||
+&cpu_l2 {
|
||||
+ operating-points-v2 = <&cluster0_opp>;
|
||||
+};
|
||||
+
|
||||
+&cpu_l3 {
|
||||
+ operating-points-v2 = <&cluster0_opp>;
|
||||
+};
|
||||
+
|
||||
+&cpu_b0 {
|
||||
+ operating-points-v2 = <&cluster1_opp>;
|
||||
+};
|
||||
+
|
||||
+&cpu_b1 {
|
||||
+ operating-points-v2 = <&cluster1_opp>;
|
||||
+};
|
||||
+
|
||||
+&gpu {
|
||||
+ operating-points-v2 = <&gpu_opp_table>;
|
||||
+};
|
||||
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
|
||||
@@ -14,7 +14,7 @@
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include "rk3399.dtsi"
|
||||
-#include "rk3399-opp.dtsi"
|
||||
+#include "rk3399-nanopi4-opp.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
--- a/arch/arm64/boot/dts/rockchip/rk3399-doornet2.dtsi
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3399-doornet2.dtsi
|
||||
@@ -3,7 +3,7 @@
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include "rk3399.dtsi"
|
||||
-#include "rk3399-opp.dtsi"
|
||||
+#include "rk3399-nanopi4-opp.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
Loading…
Reference in New Issue
Block a user