diff --git a/package/boot/uboot-rockchip/Makefile b/package/boot/uboot-rockchip/Makefile index f890d4fd9..41436a83f 100644 --- a/package/boot/uboot-rockchip/Makefile +++ b/package/boot/uboot-rockchip/Makefile @@ -178,6 +178,13 @@ define U-Boot/rk3566/Default TPL:=rk3566_ddr_1056MHz_v1.21.bin endef +define U-Boot/nanopi-r3s-rk3566 + $(U-Boot/rk3566/Default) + NAME:=NanoPi R3S + BUILD_DEVICES:= \ + friendlyarm_nanopi-r3s +endef + define U-Boot/panther-x2-rk3566 $(U-Boot/rk3566/Default) NAME:=Panther X2 @@ -335,6 +342,7 @@ define U-Boot/nanopi-r6s-rk3588s endef UBOOT_TARGETS := \ + nanopi-r3s-rk3566 \ panther-x2-rk3566 \ rock-3c-rk3566 \ bpi-r2-pro-rk3568 \ diff --git a/package/boot/uboot-rockchip/patches/326-rockchip-rk3588s-Add-FriendlyElec-NanoPi-R3S.patch b/package/boot/uboot-rockchip/patches/326-rockchip-rk3588s-Add-FriendlyElec-NanoPi-R3S.patch new file mode 100644 index 000000000..90b04dc56 --- /dev/null +++ b/package/boot/uboot-rockchip/patches/326-rockchip-rk3588s-Add-FriendlyElec-NanoPi-R3S.patch @@ -0,0 +1,102 @@ +--- /dev/null ++++ b/dts/upstream/src/arm64/rockchip/rk3566-nanopi-r3s.dts +@@ -0,0 +1,9 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++ ++/dts-v1/; ++#include "rk3568-nanopi-r5s.dtsi" ++ ++/ { ++ model = "FriendlyElec NanoPi R3S"; ++ compatible = "friendlyelec,nanopi-r3s", "rockchip,rk3568"; ++}; +--- /dev/null ++++ b/configs/nanopi-r3s-rk3566_defconfig +@@ -0,0 +1,87 @@ ++CONFIG_ARM=y ++CONFIG_SKIP_LOWLEVEL_INIT=y ++CONFIG_COUNTER_FREQUENCY=24000000 ++CONFIG_ARCH_ROCKCHIP=y ++CONFIG_TEXT_BASE=0x00a00000 ++CONFIG_SPL_LIBCOMMON_SUPPORT=y ++CONFIG_SPL_LIBGENERIC_SUPPORT=y ++CONFIG_NR_DRAM_BANKS=2 ++CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y ++CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 ++CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-nanopi-r3s" ++CONFIG_ROCKCHIP_RK3568=y ++CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y ++CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y ++CONFIG_SPL_MMC=y ++CONFIG_SPL_SERIAL=y ++CONFIG_SPL_STACK_R_ADDR=0x600000 ++CONFIG_TARGET_EVB_RK3568=y ++CONFIG_SPL_STACK=0x400000 ++CONFIG_DEBUG_UART_BASE=0xFE660000 ++CONFIG_DEBUG_UART_CLOCK=24000000 ++CONFIG_SYS_LOAD_ADDR=0xc00800 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_FIT_VERBOSE=y ++CONFIG_SPL_LOAD_FIT=y ++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-nanopi-r3s.dtb" ++# CONFIG_DISPLAY_CPUINFO is not set ++CONFIG_DISPLAY_BOARDINFO_LATE=y ++CONFIG_SPL_MAX_SIZE=0x40000 ++CONFIG_SPL_PAD_TO=0x7f8000 ++CONFIG_SPL_HAS_BSS_LINKER_SECTION=y ++CONFIG_SPL_BSS_START_ADDR=0x4000000 ++CONFIG_SPL_BSS_MAX_SIZE=0x4000 ++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set ++# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set ++CONFIG_SPL_STACK_R=y ++CONFIG_SPL_ATF=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_I2C=y ++CONFIG_CMD_MMC=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_REGULATOR=y ++# CONFIG_CMD_SETEXPR is not set ++# CONFIG_SPL_DOS_PARTITION is not set ++CONFIG_SPL_OF_CONTROL=y ++CONFIG_OF_LIVE=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_SPL_REGMAP=y ++CONFIG_SPL_SYSCON=y ++CONFIG_SPL_CLK=y ++CONFIG_CLK_SCMI=y ++CONFIG_RESET_SCMI=y ++CONFIG_ROCKCHIP_GPIO=y ++CONFIG_SYS_I2C_ROCKCHIP=y ++CONFIG_MISC=y ++CONFIG_SUPPORT_EMMC_RPMB=y ++CONFIG_MMC_DW=y ++CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_SDMA=y ++CONFIG_MMC_SDHCI_ROCKCHIP=y ++CONFIG_ETH_DESIGNWARE=y ++CONFIG_GMAC_ROCKCHIP=y ++CONFIG_DM_PMIC=y ++CONFIG_PMIC_RK8XX=y ++CONFIG_SPL_PMIC_RK8XX=y ++CONFIG_PHY_ROCKCHIP_INNO_USB2=y ++CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y ++CONFIG_REGULATOR_PWM=y ++CONFIG_REGULATOR_RK8XX=y ++CONFIG_PWM_ROCKCHIP=y ++CONFIG_SPL_RAM=y ++CONFIG_DM_RESET=y ++CONFIG_BAUDRATE=1500000 ++CONFIG_DEBUG_UART_SHIFT=2 ++CONFIG_SYS_NS16550_MEM32=y ++CONFIG_SYSRESET=y ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_DWC3=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_GENERIC=y ++CONFIG_USB_DWC3=y ++CONFIG_USB_DWC3_GENERIC=y ++CONFIG_ERRNO_STR=y diff --git a/target/linux/rockchip/armv8/base-files/etc/board.d/01_leds b/target/linux/rockchip/armv8/base-files/etc/board.d/01_leds index 19d9eb93c..18e184052 100755 --- a/target/linux/rockchip/armv8/base-files/etc/board.d/01_leds +++ b/target/linux/rockchip/armv8/base-files/etc/board.d/01_leds @@ -19,6 +19,10 @@ xunlong,orangepi-r1-plus-lts) ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0" ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth1" ;; +friendlyarm,nanopi-r3s) + ucidef_set_led_netdev "wan" "WAN" "wan_led" "eth0" + ucidef_set_led_netdev "lan" "LAN" "lan_led" "eth1" + ;; friendlyarm,nanopi-r5c) ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" diff --git a/target/linux/rockchip/armv8/base-files/etc/board.d/02_network b/target/linux/rockchip/armv8/base-files/etc/board.d/02_network index 5c081c072..0b726ab94 100755 --- a/target/linux/rockchip/armv8/base-files/etc/board.d/02_network +++ b/target/linux/rockchip/armv8/base-files/etc/board.d/02_network @@ -32,6 +32,7 @@ rockchip_setup_interfaces() armsom,sige7|\ fastrhino,r66s|\ firefly,rk3568-roc-pc|\ + friendlyarm,nanopi-r3s|\ friendlyarm,nanopi-r5c|\ friendlyarm,nanopc-t6|\ hinlink,opc-h28k|\ @@ -129,6 +130,7 @@ rockchip_setup_macs() wan_mac=$(nanopi_r4s_get_mac wan) lan_mac=$(nanopi_r4s_get_mac lan) ;; + friendlyarm,nanopi-r3s|\ friendlyarm,nanopi-r5c|\ friendlyarm,nanopi-r5s|\ friendlyarm,nanopi-r6c|\ diff --git a/target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity b/target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity index 603271f30..e63061578 100644 --- a/target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity +++ b/target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity @@ -39,6 +39,7 @@ widora,mangopi-m28k-pro) set_interface_core 4 "eth0" ;; friendlyarm,nanopc-t6|\ +friendlyarm,nanopi-r3s|\ friendlyarm,nanopi-r5c|\ friendlyarm,nanopi-r6c) set_interface_core 2 "eth0" diff --git a/target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts b/target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts new file mode 100644 index 000000000..a7a55d68d --- /dev/null +++ b/target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts @@ -0,0 +1,554 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. + * + * Copyright (c) 2024 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2024 Tianling Shen + */ + +/dts-v1/; +#include +#include +#include +#include +#include +#include "rk3566.dtsi" + +/ { + model = "FriendlyARM NanoPi R3S"; + compatible = "friendlyarm,nanopi-r3s", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&reset_button_pin>; + + button-reset { + label = "reset"; + gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <50>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&power_led_pin>, <&lan_led_pin>, <&wan_led_pin>; + + power_led: led-0 { + color = ; + function = LED_FUNCTION_POWER; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + lan_led: led-1 { + color = ; + function = LED_FUNCTION_LAN; + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; + }; + + wan_led: led-2 { + color = ; + function = LED_FUNCTION_WAN; + gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>; + }; + }; + + vcc3v3_sys: regulator-vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_usbc>; + }; + + vcc5v0_usb: regulator-vcc5v0_usb { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en>; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vdd_usbc: regulator-vdd-usbc { + compatible = "regulator-fixed"; + regulator-name = "vdd_usbc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy1>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m0_miim + &gmac1m0_tx_bus2_level3 + &gmac1m0_rx_bus2 + &gmac1m0_rgmii_clk_level2 + &gmac1m0_rgmii_bus_level3>; + snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = ; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio0>; + interrupts = ; + wakeup-source; + }; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpio4>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <ð_phy_reset_pin>; + }; +}; + +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_h>; + reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pinctrl { + gpio-leds { + lan_led_pin: lan-led-pin { + rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + power_led_pin: power-led-pin { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gmac { + eth_phy_reset_pin: eth-phy-reset-pin { + rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pcie { + pcie_reset_h: pcie-reset-h { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rockchip-key { + reset_button_pin: reset-button-pin { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rtc { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_usb_host_en: vcc5v0-usb-host-en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_1v8>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-sdio; + no-mmc; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr50; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&tsadc { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb>; + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy0>; + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; diff --git a/target/linux/rockchip/image/armv8.mk b/target/linux/rockchip/image/armv8.mk index 38068ce16..8c194def3 100644 --- a/target/linux/rockchip/image/armv8.mk +++ b/target/linux/rockchip/image/armv8.mk @@ -164,6 +164,16 @@ define Device/friendlyarm_nanopi-r2s endef TARGET_DEVICES += friendlyarm_nanopi-r2s +define Device/friendlyarm_nanopi-r3s + DEVICE_VENDOR := FriendlyARM + DEVICE_MODEL := NanoPi R3S + SOC := rk3566 + UBOOT_DEVICE_NAME := nanopi-r3s-rk3566 + IMAGE/sysupgrade.img.gz := boot-common | boot-script | pine64-img | gzip | append-metadata + DEVICE_PACKAGES := kmod-r8168 +endef +TARGET_DEVICES += friendlyarm_nanopi-r3s + define Device/friendlyarm_nanopi-r4s DEVICE_VENDOR := FriendlyARM DEVICE_MODEL := NanoPi R4S