diff --git a/target/linux/rockchip/patches-5.15/080-v5.18-mmc-core-Improve-fallback-to-speed-modes-if.patch b/target/linux/rockchip/patches-5.15/080-v5.18-mmc-core-Improve-fallback-to-speed-modes-if.patch new file mode 100644 index 000000000..142ddf98b --- /dev/null +++ b/target/linux/rockchip/patches-5.15/080-v5.18-mmc-core-Improve-fallback-to-speed-modes-if.patch @@ -0,0 +1,54 @@ +From 3b6c472822f8bdeaa3cea8290f5b4a210dca5585 Mon Sep 17 00:00:00 2001 +From: Ulf Hansson +Date: Thu, 3 Mar 2022 17:45:22 +0100 +Subject: [PATCH] mmc: core: Improve fallback to speed modes if eMMC HS200 + fails + +In the error path of mmc_select_hs200() we are trying our best to restore +the card/host into a valid state. This makes sense, especially if we +encounter a simple switch error (-EBADMSG). However, rather than then +continue with using the legacy speed mode, let's try the other better speed +modes first. Additionally, let's update the card->mmc_avail_type to avoid +us from trying a broken HS200 mode again. + +In an Amlogic S905W based TV box where the switch to HS200 mode fails for +the eMMC, this allows us to use the eMMC in DDR mode in favor of the legacy +mode, which greatly improves the performance. + +Suggested-by: Heiner Kallweit +Signed-off-by: Ulf Hansson +Tested-by: Heiner Kallweit +Link: https://lore.kernel.org/r/20220303164522.129583-1-ulf.hansson@linaro.org +--- + drivers/mmc/core/mmc.c | 16 +++++++++++++--- + 1 file changed, 13 insertions(+), 3 deletions(-) + +--- a/drivers/mmc/core/mmc.c ++++ b/drivers/mmc/core/mmc.c +@@ -1523,13 +1523,23 @@ static int mmc_select_timing(struct mmc_card *card) + if (!mmc_can_ext_csd(card)) + goto bus_speed; + +- if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400ES) ++ if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400ES) { + err = mmc_select_hs400es(card); +- else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) ++ goto out; ++ } ++ ++ if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) { + err = mmc_select_hs200(card); +- else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS) ++ if (err == -EBADMSG) ++ card->mmc_avail_type &= ~EXT_CSD_CARD_TYPE_HS200; ++ else ++ goto out; ++ } ++ ++ if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS) + err = mmc_select_hs(card); + ++out: + if (err && err != -EBADMSG) + return err; + diff --git a/target/linux/rockchip/patches-6.0/020-v6.2-net-phy-Add-driver-for-Motorcomm-yt8521.patch b/target/linux/rockchip/patches-6.0/020-v6.2-net-phy-Add-driver-for-Motorcomm-yt8521.patch new file mode 100644 index 000000000..a91099640 --- /dev/null +++ b/target/linux/rockchip/patches-6.0/020-v6.2-net-phy-Add-driver-for-Motorcomm-yt8521.patch @@ -0,0 +1,1724 @@ +From 70479a40954cf353e87a486997a3477108c75aa9 Mon Sep 17 00:00:00 2001 +From: Frank +Date: Fri, 28 Oct 2022 17:26:21 +0800 +Subject: [PATCH] net: phy: Add driver for Motorcomm yt8521 gigabit ethernet + phy + +Add a driver for the motorcomm yt8521 gigabit ethernet phy. We have verified + the driver on StarFive VisionFive development board, which is developed by + Shanghai StarFive Technology Co., Ltd.. On the board, yt8521 gigabit ethernet + phy works in utp mode, RGMII interface, supports 1000M/100M/10M speeds, and + wol(magic package). + +Signed-off-by: Frank +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + MAINTAINERS | 1 + + drivers/net/phy/Kconfig | 2 +- + drivers/net/phy/motorcomm.c | 1635 ++++++++++++++++++++++++++++++++++- + 3 files changed, 1635 insertions(+), 3 deletions(-) + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -13785,6 +13785,7 @@ F: include/uapi/linux/meye.h + + MOTORCOMM PHY DRIVER + M: Peter Geis ++M: Frank + L: netdev@vger.kernel.org + S: Maintained + F: drivers/net/phy/motorcomm.c +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -334,7 +334,7 @@ config MOTORCOMM_PHY + tristate "Motorcomm PHYs" + help + Enables support for Motorcomm network PHYs. +- Currently supports the YT8511 gigabit PHY. ++ Currently supports the YT8511, YT8521 Gigabit Ethernet PHYs. + + config NATIONAL_PHY + tristate "National Semiconductor PHYs" +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -1,15 +1,106 @@ + // SPDX-License-Identifier: GPL-2.0+ + /* +- * Driver for Motorcomm PHYs ++ * Motorcomm 8511/8521 PHY driver. + * + * Author: Peter Geis ++ * Author: Frank + */ + ++#include + #include + #include + #include + + #define PHY_ID_YT8511 0x0000010a ++#define PHY_ID_YT8521 0x0000011A ++ ++/* YT8521 Register Overview ++ * UTP Register space | FIBER Register space ++ * ------------------------------------------------------------ ++ * | UTP MII | FIBER MII | ++ * | UTP MMD | | ++ * | UTP Extended | FIBER Extended | ++ * ------------------------------------------------------------ ++ * | Common Extended | ++ * ------------------------------------------------------------ ++ */ ++ ++/* 0x10 ~ 0x15 , 0x1E and 0x1F are common MII registers of yt phy */ ++ ++/* Specific Function Control Register */ ++#define YTPHY_SPECIFIC_FUNCTION_CONTROL_REG 0x10 ++ ++/* 2b00 Manual MDI configuration ++ * 2b01 Manual MDIX configuration ++ * 2b10 Reserved ++ * 2b11 Enable automatic crossover for all modes *default* ++ */ ++#define YTPHY_SFCR_MDI_CROSSOVER_MODE_MASK (BIT(6) | BIT(5)) ++#define YTPHY_SFCR_CROSSOVER_EN BIT(3) ++#define YTPHY_SFCR_SQE_TEST_EN BIT(2) ++#define YTPHY_SFCR_POLARITY_REVERSAL_EN BIT(1) ++#define YTPHY_SFCR_JABBER_DIS BIT(0) ++ ++/* Specific Status Register */ ++#define YTPHY_SPECIFIC_STATUS_REG 0x11 ++#define YTPHY_SSR_SPEED_MODE_OFFSET 14 ++ ++#define YTPHY_SSR_SPEED_MODE_MASK (BIT(15) | BIT(14)) ++#define YTPHY_SSR_SPEED_10M 0x0 ++#define YTPHY_SSR_SPEED_100M 0x1 ++#define YTPHY_SSR_SPEED_1000M 0x2 ++#define YTPHY_SSR_DUPLEX_OFFSET 13 ++#define YTPHY_SSR_DUPLEX BIT(13) ++#define YTPHY_SSR_PAGE_RECEIVED BIT(12) ++#define YTPHY_SSR_SPEED_DUPLEX_RESOLVED BIT(11) ++#define YTPHY_SSR_LINK BIT(10) ++#define YTPHY_SSR_MDIX_CROSSOVER BIT(6) ++#define YTPHY_SSR_DOWNGRADE BIT(5) ++#define YTPHY_SSR_TRANSMIT_PAUSE BIT(3) ++#define YTPHY_SSR_RECEIVE_PAUSE BIT(2) ++#define YTPHY_SSR_POLARITY BIT(1) ++#define YTPHY_SSR_JABBER BIT(0) ++ ++/* Interrupt enable Register */ ++#define YTPHY_INTERRUPT_ENABLE_REG 0x12 ++#define YTPHY_IER_WOL BIT(6) ++ ++/* Interrupt Status Register */ ++#define YTPHY_INTERRUPT_STATUS_REG 0x13 ++#define YTPHY_ISR_AUTONEG_ERR BIT(15) ++#define YTPHY_ISR_SPEED_CHANGED BIT(14) ++#define YTPHY_ISR_DUPLEX_CHANGED BIT(13) ++#define YTPHY_ISR_PAGE_RECEIVED BIT(12) ++#define YTPHY_ISR_LINK_FAILED BIT(11) ++#define YTPHY_ISR_LINK_SUCCESSED BIT(10) ++#define YTPHY_ISR_WOL BIT(6) ++#define YTPHY_ISR_WIRESPEED_DOWNGRADE BIT(5) ++#define YTPHY_ISR_SERDES_LINK_FAILED BIT(3) ++#define YTPHY_ISR_SERDES_LINK_SUCCESSED BIT(2) ++#define YTPHY_ISR_POLARITY_CHANGED BIT(1) ++#define YTPHY_ISR_JABBER_HAPPENED BIT(0) ++ ++/* Speed Auto Downgrade Control Register */ ++#define YTPHY_SPEED_AUTO_DOWNGRADE_CONTROL_REG 0x14 ++#define YTPHY_SADCR_SPEED_DOWNGRADE_EN BIT(5) ++ ++/* If these bits are set to 3, the PHY attempts five times ( 3(set value) + ++ * additional 2) before downgrading, default 0x3 ++ */ ++#define YTPHY_SADCR_SPEED_RETRY_LIMIT (0x3 << 2) ++ ++/* Rx Error Counter Register */ ++#define YTPHY_RX_ERROR_COUNTER_REG 0x15 ++ ++/* Extended Register's Address Offset Register */ ++#define YTPHY_PAGE_SELECT 0x1E ++ ++/* Extended Register's Data Register */ ++#define YTPHY_PAGE_DATA 0x1F ++ ++/* FIBER Auto-Negotiation link partner ability */ ++#define YTPHY_FLPA_PAUSE (0x3 << 7) ++#define YTPHY_FLPA_ASYM_PAUSE (0x2 << 7) + + #define YT8511_PAGE_SELECT 0x1e + #define YT8511_PAGE 0x1f +@@ -38,6 +129,352 @@ + #define YT8511_DELAY_FE_TX_EN (0xf << 12) + #define YT8511_DELAY_FE_TX_DIS (0x2 << 12) + ++/* Extended register is different from MMD Register and MII Register. ++ * We can use ytphy_read_ext/ytphy_write_ext/ytphy_modify_ext function to ++ * operate extended register. ++ * Extended Register start ++ */ ++ ++/* Phy gmii clock gating Register */ ++#define YT8521_CLOCK_GATING_REG 0xC ++#define YT8521_CGR_RX_CLK_EN BIT(12) ++ ++#define YT8521_EXTREG_SLEEP_CONTROL1_REG 0x27 ++#define YT8521_ESC1R_SLEEP_SW BIT(15) ++#define YT8521_ESC1R_PLLON_SLP BIT(14) ++ ++/* Phy fiber Link timer cfg2 Register */ ++#define YT8521_LINK_TIMER_CFG2_REG 0xA5 ++#define YT8521_LTCR_EN_AUTOSEN BIT(15) ++ ++/* 0xA000, 0xA001, 0xA003 ,and 0xA006 ~ 0xA00A are common ext registers ++ * of yt8521 phy. There is no need to switch reg space when operating these ++ * registers. ++ */ ++ ++#define YT8521_REG_SPACE_SELECT_REG 0xA000 ++#define YT8521_RSSR_SPACE_MASK BIT(1) ++#define YT8521_RSSR_FIBER_SPACE (0x1 << 1) ++#define YT8521_RSSR_UTP_SPACE (0x0 << 1) ++#define YT8521_RSSR_TO_BE_ARBITRATED (0xFF) ++ ++#define YT8521_CHIP_CONFIG_REG 0xA001 ++#define YT8521_CCR_SW_RST BIT(15) ++ ++#define YT8521_CCR_MODE_SEL_MASK (BIT(2) | BIT(1) | BIT(0)) ++#define YT8521_CCR_MODE_UTP_TO_RGMII 0 ++#define YT8521_CCR_MODE_FIBER_TO_RGMII 1 ++#define YT8521_CCR_MODE_UTP_FIBER_TO_RGMII 2 ++#define YT8521_CCR_MODE_UTP_TO_SGMII 3 ++#define YT8521_CCR_MODE_SGPHY_TO_RGMAC 4 ++#define YT8521_CCR_MODE_SGMAC_TO_RGPHY 5 ++#define YT8521_CCR_MODE_UTP_TO_FIBER_AUTO 6 ++#define YT8521_CCR_MODE_UTP_TO_FIBER_FORCE 7 ++ ++/* 3 phy polling modes,poll mode combines utp and fiber mode*/ ++#define YT8521_MODE_FIBER 0x1 ++#define YT8521_MODE_UTP 0x2 ++#define YT8521_MODE_POLL 0x3 ++ ++#define YT8521_RGMII_CONFIG1_REG 0xA003 ++ ++/* TX Gig-E Delay is bits 3:0, default 0x1 ++ * TX Fast-E Delay is bits 7:4, default 0xf ++ * RX Delay is bits 13:10, default 0x0 ++ * Delay = 150ps * N ++ * On = 2250ps, off = 0ps ++ */ ++#define YT8521_RC1R_RX_DELAY_MASK (0xF << 10) ++#define YT8521_RC1R_RX_DELAY_EN (0xF << 10) ++#define YT8521_RC1R_RX_DELAY_DIS (0x0 << 10) ++#define YT8521_RC1R_FE_TX_DELAY_MASK (0xF << 4) ++#define YT8521_RC1R_FE_TX_DELAY_EN (0xF << 4) ++#define YT8521_RC1R_FE_TX_DELAY_DIS (0x0 << 4) ++#define YT8521_RC1R_GE_TX_DELAY_MASK (0xF << 0) ++#define YT8521_RC1R_GE_TX_DELAY_EN (0xF << 0) ++#define YT8521_RC1R_GE_TX_DELAY_DIS (0x0 << 0) ++ ++#define YTPHY_MISC_CONFIG_REG 0xA006 ++#define YTPHY_MCR_FIBER_SPEED_MASK BIT(0) ++#define YTPHY_MCR_FIBER_1000BX (0x1 << 0) ++#define YTPHY_MCR_FIBER_100FX (0x0 << 0) ++ ++/* WOL MAC ADDR: MACADDR2(highest), MACADDR1(middle), MACADDR0(lowest) */ ++#define YTPHY_WOL_MACADDR2_REG 0xA007 ++#define YTPHY_WOL_MACADDR1_REG 0xA008 ++#define YTPHY_WOL_MACADDR0_REG 0xA009 ++ ++#define YTPHY_WOL_CONFIG_REG 0xA00A ++#define YTPHY_WCR_INTR_SEL BIT(6) ++#define YTPHY_WCR_ENABLE BIT(3) ++ ++/* 2b00 84ms ++ * 2b01 168ms *default* ++ * 2b10 336ms ++ * 2b11 672ms ++ */ ++#define YTPHY_WCR_PULSE_WIDTH_MASK (BIT(2) | BIT(1)) ++#define YTPHY_WCR_PULSE_WIDTH_672MS (BIT(2) | BIT(1)) ++ ++/* 1b0 Interrupt and WOL events is level triggered and active LOW *default* ++ * 1b1 Interrupt and WOL events is pulse triggered and active LOW ++ */ ++#define YTPHY_WCR_TYPE_PULSE BIT(0) ++ ++/* Extended Register end */ ++ ++struct yt8521_priv { ++ /* combo_advertising is used for case of YT8521 in combo mode, ++ * this means that yt8521 may work in utp or fiber mode which depends ++ * on which media is connected (YT8521_RSSR_TO_BE_ARBITRATED). ++ */ ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(combo_advertising); ++ ++ /* YT8521_MODE_FIBER / YT8521_MODE_UTP / YT8521_MODE_POLL*/ ++ u8 polling_mode; ++ u8 strap_mode; /* 8 working modes */ ++ /* current reg page of yt8521 phy: ++ * YT8521_RSSR_UTP_SPACE ++ * YT8521_RSSR_FIBER_SPACE ++ * YT8521_RSSR_TO_BE_ARBITRATED ++ */ ++ u8 reg_page; ++}; ++ ++/** ++ * ytphy_read_ext() - read a PHY's extended register ++ * @phydev: a pointer to a &struct phy_device ++ * @regnum: register number to read ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns the value of regnum reg or negative error code ++ */ ++static int ytphy_read_ext(struct phy_device *phydev, u16 regnum) ++{ ++ int ret; ++ ++ ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum); ++ if (ret < 0) ++ return ret; ++ ++ return __phy_read(phydev, YTPHY_PAGE_DATA); ++} ++ ++/** ++ * ytphy_read_ext_with_lock() - read a PHY's extended register ++ * @phydev: a pointer to a &struct phy_device ++ * @regnum: register number to read ++ * ++ * returns the value of regnum reg or negative error code ++ */ ++static int ytphy_read_ext_with_lock(struct phy_device *phydev, u16 regnum) ++{ ++ int ret; ++ ++ phy_lock_mdio_bus(phydev); ++ ret = ytphy_read_ext(phydev, regnum); ++ phy_unlock_mdio_bus(phydev); ++ ++ return ret; ++} ++ ++/** ++ * ytphy_write_ext() - write a PHY's extended register ++ * @phydev: a pointer to a &struct phy_device ++ * @regnum: register number to write ++ * @val: value to write to @regnum ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative error code ++ */ ++static int ytphy_write_ext(struct phy_device *phydev, u16 regnum, u16 val) ++{ ++ int ret; ++ ++ ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum); ++ if (ret < 0) ++ return ret; ++ ++ return __phy_write(phydev, YTPHY_PAGE_DATA, val); ++} ++ ++/** ++ * ytphy_write_ext_with_lock() - write a PHY's extended register ++ * @phydev: a pointer to a &struct phy_device ++ * @regnum: register number to write ++ * @val: value to write to @regnum ++ * ++ * returns 0 or negative error code ++ */ ++static int ytphy_write_ext_with_lock(struct phy_device *phydev, u16 regnum, ++ u16 val) ++{ ++ int ret; ++ ++ phy_lock_mdio_bus(phydev); ++ ret = ytphy_write_ext(phydev, regnum, val); ++ phy_unlock_mdio_bus(phydev); ++ ++ return ret; ++} ++ ++/** ++ * ytphy_modify_ext() - bits modify a PHY's extended register ++ * @phydev: a pointer to a &struct phy_device ++ * @regnum: register number to write ++ * @mask: bit mask of bits to clear ++ * @set: bit mask of bits to set ++ * ++ * NOTE: Convenience function which allows a PHY's extended register to be ++ * modified as new register value = (old register value & ~mask) | set. ++ * The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative error code ++ */ ++static int ytphy_modify_ext(struct phy_device *phydev, u16 regnum, u16 mask, ++ u16 set) ++{ ++ int ret; ++ ++ ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum); ++ if (ret < 0) ++ return ret; ++ ++ return __phy_modify(phydev, YTPHY_PAGE_DATA, mask, set); ++} ++ ++/** ++ * ytphy_modify_ext_with_lock() - bits modify a PHY's extended register ++ * @phydev: a pointer to a &struct phy_device ++ * @regnum: register number to write ++ * @mask: bit mask of bits to clear ++ * @set: bit mask of bits to set ++ * ++ * NOTE: Convenience function which allows a PHY's extended register to be ++ * modified as new register value = (old register value & ~mask) | set. ++ * ++ * returns 0 or negative error code ++ */ ++static int ytphy_modify_ext_with_lock(struct phy_device *phydev, u16 regnum, ++ u16 mask, u16 set) ++{ ++ int ret; ++ ++ phy_lock_mdio_bus(phydev); ++ ret = ytphy_modify_ext(phydev, regnum, mask, set); ++ phy_unlock_mdio_bus(phydev); ++ ++ return ret; ++} ++ ++/** ++ * ytphy_get_wol() - report whether wake-on-lan is enabled ++ * @phydev: a pointer to a &struct phy_device ++ * @wol: a pointer to a &struct ethtool_wolinfo ++ * ++ * NOTE: YTPHY_WOL_CONFIG_REG is common ext reg. ++ */ ++static void ytphy_get_wol(struct phy_device *phydev, ++ struct ethtool_wolinfo *wol) ++{ ++ int wol_config; ++ ++ wol->supported = WAKE_MAGIC; ++ wol->wolopts = 0; ++ ++ wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); ++ if (wol_config < 0) ++ return; ++ ++ if (wol_config & YTPHY_WCR_ENABLE) ++ wol->wolopts |= WAKE_MAGIC; ++} ++ ++/** ++ * ytphy_set_wol() - turn wake-on-lan on or off ++ * @phydev: a pointer to a &struct phy_device ++ * @wol: a pointer to a &struct ethtool_wolinfo ++ * ++ * NOTE: YTPHY_WOL_CONFIG_REG, YTPHY_WOL_MACADDR2_REG, YTPHY_WOL_MACADDR1_REG ++ * and YTPHY_WOL_MACADDR0_REG are common ext reg. The ++ * YTPHY_INTERRUPT_ENABLE_REG of UTP is special, fiber also use this register. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) ++{ ++ struct net_device *p_attached_dev; ++ const u16 mac_addr_reg[] = { ++ YTPHY_WOL_MACADDR2_REG, ++ YTPHY_WOL_MACADDR1_REG, ++ YTPHY_WOL_MACADDR0_REG, ++ }; ++ const u8 *mac_addr; ++ int old_page; ++ int ret = 0; ++ u16 mask; ++ u16 val; ++ u8 i; ++ ++ if (wol->wolopts & WAKE_MAGIC) { ++ p_attached_dev = phydev->attached_dev; ++ if (!p_attached_dev) ++ return -ENODEV; ++ ++ mac_addr = (const u8 *)p_attached_dev->dev_addr; ++ if (!is_valid_ether_addr(mac_addr)) ++ return -EINVAL; ++ ++ /* lock mdio bus then switch to utp reg space */ ++ old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ /* Store the device address for the magic packet */ ++ for (i = 0; i < 3; i++) { ++ ret = ytphy_write_ext(phydev, mac_addr_reg[i], ++ ((mac_addr[i * 2] << 8)) | ++ (mac_addr[i * 2 + 1])); ++ if (ret < 0) ++ goto err_restore_page; ++ } ++ ++ /* Enable WOL feature */ ++ mask = YTPHY_WCR_PULSE_WIDTH_MASK | YTPHY_WCR_INTR_SEL; ++ val = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; ++ val |= YTPHY_WCR_TYPE_PULSE | YTPHY_WCR_PULSE_WIDTH_672MS; ++ ret = ytphy_modify_ext(phydev, YTPHY_WOL_CONFIG_REG, mask, val); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ /* Enable WOL interrupt */ ++ ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, 0, ++ YTPHY_IER_WOL); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ } else { ++ old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ /* Disable WOL feature */ ++ mask = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; ++ ret = ytphy_modify_ext(phydev, YTPHY_WOL_CONFIG_REG, mask, 0); ++ ++ /* Disable WOL interrupt */ ++ ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, ++ YTPHY_IER_WOL, 0); ++ if (ret < 0) ++ goto err_restore_page; ++ } ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ + static int yt8511_read_page(struct phy_device *phydev) + { + return __phy_read(phydev, YT8511_PAGE_SELECT); +@@ -111,6 +548,1181 @@ static int yt8511_config_init(struct phy_device *phydev) + return phy_restore_page(phydev, oldpage, ret); + } + ++/** ++ * yt8521_read_page() - read reg page ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns current reg space of yt8521 (YT8521_RSSR_FIBER_SPACE/ ++ * YT8521_RSSR_UTP_SPACE) or negative errno code ++ */ ++static int yt8521_read_page(struct phy_device *phydev) ++{ ++ int old_page; ++ ++ old_page = ytphy_read_ext(phydev, YT8521_REG_SPACE_SELECT_REG); ++ if (old_page < 0) ++ return old_page; ++ ++ if ((old_page & YT8521_RSSR_SPACE_MASK) == YT8521_RSSR_FIBER_SPACE) ++ return YT8521_RSSR_FIBER_SPACE; ++ ++ return YT8521_RSSR_UTP_SPACE; ++}; ++ ++/** ++ * yt8521_write_page() - write reg page ++ * @phydev: a pointer to a &struct phy_device ++ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to write. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_write_page(struct phy_device *phydev, int page) ++{ ++ int mask = YT8521_RSSR_SPACE_MASK; ++ int set; ++ ++ if ((page & YT8521_RSSR_SPACE_MASK) == YT8521_RSSR_FIBER_SPACE) ++ set = YT8521_RSSR_FIBER_SPACE; ++ else ++ set = YT8521_RSSR_UTP_SPACE; ++ ++ return ytphy_modify_ext(phydev, YT8521_REG_SPACE_SELECT_REG, mask, set); ++}; ++ ++/** ++ * yt8521_probe() - read chip config then set suitable polling_mode ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_probe(struct phy_device *phydev) ++{ ++ struct device *dev = &phydev->mdio.dev; ++ struct yt8521_priv *priv; ++ int chip_config; ++ int ret; ++ ++ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ phydev->priv = priv; ++ ++ chip_config = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG); ++ if (chip_config < 0) ++ return chip_config; ++ ++ priv->strap_mode = chip_config & YT8521_CCR_MODE_SEL_MASK; ++ switch (priv->strap_mode) { ++ case YT8521_CCR_MODE_FIBER_TO_RGMII: ++ case YT8521_CCR_MODE_SGPHY_TO_RGMAC: ++ case YT8521_CCR_MODE_SGMAC_TO_RGPHY: ++ priv->polling_mode = YT8521_MODE_FIBER; ++ priv->reg_page = YT8521_RSSR_FIBER_SPACE; ++ phydev->port = PORT_FIBRE; ++ break; ++ case YT8521_CCR_MODE_UTP_FIBER_TO_RGMII: ++ case YT8521_CCR_MODE_UTP_TO_FIBER_AUTO: ++ case YT8521_CCR_MODE_UTP_TO_FIBER_FORCE: ++ priv->polling_mode = YT8521_MODE_POLL; ++ priv->reg_page = YT8521_RSSR_TO_BE_ARBITRATED; ++ phydev->port = PORT_NONE; ++ break; ++ case YT8521_CCR_MODE_UTP_TO_SGMII: ++ case YT8521_CCR_MODE_UTP_TO_RGMII: ++ priv->polling_mode = YT8521_MODE_UTP; ++ priv->reg_page = YT8521_RSSR_UTP_SPACE; ++ phydev->port = PORT_TP; ++ break; ++ } ++ /* set default reg space */ ++ if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ++ ret = ytphy_write_ext_with_lock(phydev, ++ YT8521_REG_SPACE_SELECT_REG, ++ priv->reg_page); ++ if (ret < 0) ++ return ret; ++ } ++ ++ return 0; ++} ++ ++/** ++ * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_utp_read_lpa(struct phy_device *phydev) ++{ ++ int lpa, lpagb; ++ ++ if (phydev->autoneg == AUTONEG_ENABLE) { ++ if (!phydev->autoneg_complete) { ++ mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ++ 0); ++ mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0); ++ return 0; ++ } ++ ++ if (phydev->is_gigabit_capable) { ++ lpagb = __phy_read(phydev, MII_STAT1000); ++ if (lpagb < 0) ++ return lpagb; ++ ++ if (lpagb & LPA_1000MSFAIL) { ++ int adv = __phy_read(phydev, MII_CTRL1000); ++ ++ if (adv < 0) ++ return adv; ++ ++ if (adv & CTL1000_ENABLE_MASTER) ++ phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n"); ++ else ++ phydev_err(phydev, "Master/Slave resolution failed\n"); ++ return -ENOLINK; ++ } ++ ++ mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ++ lpagb); ++ } ++ ++ lpa = __phy_read(phydev, MII_LPA); ++ if (lpa < 0) ++ return lpa; ++ ++ mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa); ++ } else { ++ linkmode_zero(phydev->lp_advertising); ++ } ++ ++ return 0; ++} ++ ++/** ++ * yt8521_adjust_status() - update speed and duplex to phydev. when in fiber ++ * mode, adjust speed and duplex. ++ * @phydev: a pointer to a &struct phy_device ++ * @status: yt8521 status read from YTPHY_SPECIFIC_STATUS_REG ++ * @is_utp: false(yt8521 work in fiber mode) or true(yt8521 work in utp mode) ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 ++ */ ++static int yt8521_adjust_status(struct phy_device *phydev, int status, ++ bool is_utp) ++{ ++ int speed_mode, duplex; ++ int speed; ++ int err; ++ int lpa; ++ ++ if (is_utp) ++ duplex = (status & YTPHY_SSR_DUPLEX) >> YTPHY_SSR_DUPLEX_OFFSET; ++ else ++ duplex = DUPLEX_FULL; /* for fiber, it always DUPLEX_FULL */ ++ ++ speed_mode = (status & YTPHY_SSR_SPEED_MODE_MASK) >> ++ YTPHY_SSR_SPEED_MODE_OFFSET; ++ ++ switch (speed_mode) { ++ case YTPHY_SSR_SPEED_10M: ++ if (is_utp) ++ speed = SPEED_10; ++ else ++ /* for fiber, it will never run here, default to ++ * SPEED_UNKNOWN ++ */ ++ speed = SPEED_UNKNOWN; ++ break; ++ case YTPHY_SSR_SPEED_100M: ++ speed = SPEED_100; ++ break; ++ case YTPHY_SSR_SPEED_1000M: ++ speed = SPEED_1000; ++ break; ++ default: ++ speed = SPEED_UNKNOWN; ++ break; ++ } ++ ++ phydev->speed = speed; ++ phydev->duplex = duplex; ++ ++ if (is_utp) { ++ err = ytphy_utp_read_lpa(phydev); ++ if (err < 0) ++ return err; ++ ++ phy_resolve_aneg_pause(phydev); ++ } else { ++ lpa = __phy_read(phydev, MII_LPA); ++ if (lpa < 0) ++ return lpa; ++ ++ /* only support 1000baseX Full */ ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, ++ phydev->lp_advertising, lpa & LPA_1000XFULL); ++ ++ if (!(lpa & YTPHY_FLPA_PAUSE)) { ++ phydev->pause = 0; ++ phydev->asym_pause = 0; ++ } else if ((lpa & YTPHY_FLPA_ASYM_PAUSE)) { ++ phydev->pause = 1; ++ phydev->asym_pause = 1; ++ } else { ++ phydev->pause = 1; ++ phydev->asym_pause = 0; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * yt8521_read_status_paged() - determines the speed and duplex of one page ++ * @phydev: a pointer to a &struct phy_device ++ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to ++ * operate. ++ * ++ * returns 1 (utp or fiber link),0 (no link) or negative errno code ++ */ ++static int yt8521_read_status_paged(struct phy_device *phydev, int page) ++{ ++ int fiber_latch_val; ++ int fiber_curr_val; ++ int old_page; ++ int ret = 0; ++ int status; ++ int link; ++ ++ linkmode_zero(phydev->lp_advertising); ++ phydev->duplex = DUPLEX_UNKNOWN; ++ phydev->speed = SPEED_UNKNOWN; ++ phydev->asym_pause = 0; ++ phydev->pause = 0; ++ ++ /* YT8521 has two reg space (utp/fiber) for linkup with utp/fiber ++ * respectively. but for utp/fiber combo mode, reg space should be ++ * arbitrated based on media priority. by default, utp takes ++ * priority. reg space should be properly set before read ++ * YTPHY_SPECIFIC_STATUS_REG. ++ */ ++ ++ page &= YT8521_RSSR_SPACE_MASK; ++ old_page = phy_select_page(phydev, page); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ /* Read YTPHY_SPECIFIC_STATUS_REG, which indicates the speed and duplex ++ * of the PHY is actually using. ++ */ ++ ret = __phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ status = ret; ++ link = !!(status & YTPHY_SSR_LINK); ++ ++ /* When PHY is in fiber mode, speed transferred from 1000Mbps to ++ * 100Mbps,there is not link down from YTPHY_SPECIFIC_STATUS_REG, so ++ * we need check MII_BMSR to identify such case. ++ */ ++ if (page == YT8521_RSSR_FIBER_SPACE) { ++ ret = __phy_read(phydev, MII_BMSR); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ fiber_latch_val = ret; ++ ret = __phy_read(phydev, MII_BMSR); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ fiber_curr_val = ret; ++ if (link && fiber_latch_val != fiber_curr_val) { ++ link = 0; ++ phydev_info(phydev, ++ "%s, fiber link down detect, latch = %04x, curr = %04x\n", ++ __func__, fiber_latch_val, fiber_curr_val); ++ } ++ } else { ++ /* Read autonegotiation status */ ++ ret = __phy_read(phydev, MII_BMSR); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ phydev->autoneg_complete = ret & BMSR_ANEGCOMPLETE ? 1 : 0; ++ } ++ ++ if (link) { ++ if (page == YT8521_RSSR_UTP_SPACE) ++ yt8521_adjust_status(phydev, status, true); ++ else ++ yt8521_adjust_status(phydev, status, false); ++ } ++ return phy_restore_page(phydev, old_page, link); ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ ++/** ++ * yt8521_read_status() - determines the negotiated speed and duplex ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_read_status(struct phy_device *phydev) ++{ ++ struct yt8521_priv *priv = phydev->priv; ++ int link_fiber = 0; ++ int link_utp; ++ int link; ++ int ret; ++ ++ if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ++ link = yt8521_read_status_paged(phydev, priv->reg_page); ++ if (link < 0) ++ return link; ++ } else { ++ /* when page is YT8521_RSSR_TO_BE_ARBITRATED, arbitration is ++ * needed. by default, utp is higher priority. ++ */ ++ ++ link_utp = yt8521_read_status_paged(phydev, ++ YT8521_RSSR_UTP_SPACE); ++ if (link_utp < 0) ++ return link_utp; ++ ++ if (!link_utp) { ++ link_fiber = yt8521_read_status_paged(phydev, ++ YT8521_RSSR_FIBER_SPACE); ++ if (link_fiber < 0) ++ return link_fiber; ++ } ++ ++ link = link_utp || link_fiber; ++ } ++ ++ if (link) { ++ if (phydev->link == 0) { ++ /* arbitrate reg space based on linkup media type. */ ++ if (priv->polling_mode == YT8521_MODE_POLL && ++ priv->reg_page == YT8521_RSSR_TO_BE_ARBITRATED) { ++ if (link_fiber) ++ priv->reg_page = ++ YT8521_RSSR_FIBER_SPACE; ++ else ++ priv->reg_page = YT8521_RSSR_UTP_SPACE; ++ ++ ret = ytphy_write_ext_with_lock(phydev, ++ YT8521_REG_SPACE_SELECT_REG, ++ priv->reg_page); ++ if (ret < 0) ++ return ret; ++ ++ phydev->port = link_fiber ? PORT_FIBRE : PORT_TP; ++ ++ phydev_info(phydev, "%s, link up, media: %s\n", ++ __func__, ++ (phydev->port == PORT_TP) ? ++ "UTP" : "Fiber"); ++ } ++ } ++ phydev->link = 1; ++ } else { ++ if (phydev->link == 1) { ++ phydev_info(phydev, "%s, link down, media: %s\n", ++ __func__, (phydev->port == PORT_TP) ? ++ "UTP" : "Fiber"); ++ ++ /* When in YT8521_MODE_POLL mode, need prepare for next ++ * arbitration. ++ */ ++ if (priv->polling_mode == YT8521_MODE_POLL) { ++ priv->reg_page = YT8521_RSSR_TO_BE_ARBITRATED; ++ phydev->port = PORT_NONE; ++ } ++ } ++ ++ phydev->link = 0; ++ } ++ ++ return 0; ++} ++ ++/** ++ * yt8521_modify_bmcr_paged - bits modify a PHY's BMCR register of one page ++ * @phydev: the phy_device struct ++ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to operate ++ * @mask: bit mask of bits to clear ++ * @set: bit mask of bits to set ++ * ++ * NOTE: Convenience function which allows a PHY's BMCR register to be ++ * modified as new register value = (old register value & ~mask) | set. ++ * YT8521 has two space (utp/fiber) and three mode (utp/fiber/poll), each space ++ * has MII_BMCR. poll mode combines utp and faber,so need do both. ++ * If it is reset, it will wait for completion. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_modify_bmcr_paged(struct phy_device *phydev, int page, ++ u16 mask, u16 set) ++{ ++ int max_cnt = 500; /* the max wait time of reset ~ 500 ms */ ++ int old_page; ++ int ret = 0; ++ ++ old_page = phy_select_page(phydev, page & YT8521_RSSR_SPACE_MASK); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ ret = __phy_modify(phydev, MII_BMCR, mask, set); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ /* If it is reset, need to wait for the reset to complete */ ++ if (set == BMCR_RESET) { ++ while (max_cnt--) { ++ usleep_range(1000, 1100); ++ ret = __phy_read(phydev, MII_BMCR); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ if (!(ret & BMCR_RESET)) ++ return phy_restore_page(phydev, old_page, 0); ++ } ++ } ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ ++/** ++ * yt8521_modify_utp_fiber_bmcr - bits modify a PHY's BMCR register ++ * @phydev: the phy_device struct ++ * @mask: bit mask of bits to clear ++ * @set: bit mask of bits to set ++ * ++ * NOTE: Convenience function which allows a PHY's BMCR register to be ++ * modified as new register value = (old register value & ~mask) | set. ++ * YT8521 has two space (utp/fiber) and three mode (utp/fiber/poll), each space ++ * has MII_BMCR. poll mode combines utp and faber,so need do both. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_modify_utp_fiber_bmcr(struct phy_device *phydev, u16 mask, ++ u16 set) ++{ ++ struct yt8521_priv *priv = phydev->priv; ++ int ret; ++ ++ if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ++ ret = yt8521_modify_bmcr_paged(phydev, priv->reg_page, mask, ++ set); ++ if (ret < 0) ++ return ret; ++ } else { ++ ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_UTP_SPACE, ++ mask, set); ++ if (ret < 0) ++ return ret; ++ ++ ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_FIBER_SPACE, ++ mask, set); ++ if (ret < 0) ++ return ret; ++ } ++ return 0; ++} ++ ++/** ++ * yt8521_soft_reset() - called to issue a PHY software reset ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_soft_reset(struct phy_device *phydev) ++{ ++ return yt8521_modify_utp_fiber_bmcr(phydev, 0, BMCR_RESET); ++} ++ ++/** ++ * yt8521_suspend() - suspend the hardware ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_suspend(struct phy_device *phydev) ++{ ++ int wol_config; ++ ++ /* YTPHY_WOL_CONFIG_REG is common ext reg */ ++ wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); ++ if (wol_config < 0) ++ return wol_config; ++ ++ /* if wol enable, do nothing */ ++ if (wol_config & YTPHY_WCR_ENABLE) ++ return 0; ++ ++ return yt8521_modify_utp_fiber_bmcr(phydev, 0, BMCR_PDOWN); ++} ++ ++/** ++ * yt8521_resume() - resume the hardware ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_resume(struct phy_device *phydev) ++{ ++ int ret; ++ int wol_config; ++ ++ /* disable auto sleep */ ++ ret = ytphy_modify_ext_with_lock(phydev, ++ YT8521_EXTREG_SLEEP_CONTROL1_REG, ++ YT8521_ESC1R_SLEEP_SW, 0); ++ if (ret < 0) ++ return ret; ++ ++ wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); ++ if (wol_config < 0) ++ return wol_config; ++ ++ /* if wol enable, do nothing */ ++ if (wol_config & YTPHY_WCR_ENABLE) ++ return 0; ++ ++ return yt8521_modify_utp_fiber_bmcr(phydev, BMCR_PDOWN, 0); ++} ++ ++/** ++ * yt8521_config_init() - called to initialize the PHY ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_config_init(struct phy_device *phydev) ++{ ++ int old_page; ++ int ret = 0; ++ u16 val; ++ ++ old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ switch (phydev->interface) { ++ case PHY_INTERFACE_MODE_RGMII: ++ val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS; ++ val |= YT8521_RC1R_RX_DELAY_DIS; ++ break; ++ case PHY_INTERFACE_MODE_RGMII_RXID: ++ val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS; ++ val |= YT8521_RC1R_RX_DELAY_EN; ++ break; ++ case PHY_INTERFACE_MODE_RGMII_TXID: ++ val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN; ++ val |= YT8521_RC1R_RX_DELAY_DIS; ++ break; ++ case PHY_INTERFACE_MODE_RGMII_ID: ++ val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN; ++ val |= YT8521_RC1R_RX_DELAY_EN; ++ break; ++ case PHY_INTERFACE_MODE_SGMII: ++ break; ++ default: /* do not support other modes */ ++ ret = -EOPNOTSUPP; ++ goto err_restore_page; ++ } ++ ++ /* set rgmii delay mode */ ++ if (phydev->interface != PHY_INTERFACE_MODE_SGMII) { ++ ret = ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, ++ (YT8521_RC1R_RX_DELAY_MASK | ++ YT8521_RC1R_FE_TX_DELAY_MASK | ++ YT8521_RC1R_GE_TX_DELAY_MASK), ++ val); ++ if (ret < 0) ++ goto err_restore_page; ++ } ++ ++ /* disable auto sleep */ ++ ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG, ++ YT8521_ESC1R_SLEEP_SW, 0); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ /* enable RXC clock when no wire plug */ ++ ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG, ++ YT8521_CGR_RX_CLK_EN, 0); ++ if (ret < 0) ++ goto err_restore_page; ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ ++/** ++ * yt8521_prepare_fiber_features() - A small helper function that setup ++ * fiber's features. ++ * @phydev: a pointer to a &struct phy_device ++ * @dst: a pointer to store fiber's features ++ */ ++static void yt8521_prepare_fiber_features(struct phy_device *phydev, ++ unsigned long *dst) ++{ ++ linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT, dst); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, dst); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, dst); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, dst); ++} ++ ++/** ++ * yt8521_fiber_setup_forced - configures/forces speed from @phydev ++ * @phydev: target phy_device struct ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_fiber_setup_forced(struct phy_device *phydev) ++{ ++ u16 val; ++ int ret; ++ ++ if (phydev->speed == SPEED_1000) ++ val = YTPHY_MCR_FIBER_1000BX; ++ else if (phydev->speed == SPEED_100) ++ val = YTPHY_MCR_FIBER_100FX; ++ else ++ return -EINVAL; ++ ++ ret = __phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0); ++ if (ret < 0) ++ return ret; ++ ++ /* disable Fiber auto sensing */ ++ ret = ytphy_modify_ext(phydev, YT8521_LINK_TIMER_CFG2_REG, ++ YT8521_LTCR_EN_AUTOSEN, 0); ++ if (ret < 0) ++ return ret; ++ ++ ret = ytphy_modify_ext(phydev, YTPHY_MISC_CONFIG_REG, ++ YTPHY_MCR_FIBER_SPEED_MASK, val); ++ if (ret < 0) ++ return ret; ++ ++ return ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG, ++ YT8521_CCR_SW_RST, 0); ++} ++ ++/** ++ * ytphy_check_and_restart_aneg - Enable and restart auto-negotiation ++ * @phydev: target phy_device struct ++ * @restart: whether aneg restart is requested ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_check_and_restart_aneg(struct phy_device *phydev, bool restart) ++{ ++ int ret; ++ ++ if (!restart) { ++ /* Advertisement hasn't changed, but maybe aneg was never on to ++ * begin with? Or maybe phy was isolated? ++ */ ++ ret = __phy_read(phydev, MII_BMCR); ++ if (ret < 0) ++ return ret; ++ ++ if (!(ret & BMCR_ANENABLE) || (ret & BMCR_ISOLATE)) ++ restart = true; ++ } ++ /* Enable and Restart Autonegotiation ++ * Don't isolate the PHY if we're negotiating ++ */ ++ if (restart) ++ return __phy_modify(phydev, MII_BMCR, BMCR_ISOLATE, ++ BMCR_ANENABLE | BMCR_ANRESTART); ++ ++ return 0; ++} ++ ++/** ++ * yt8521_fiber_config_aneg - restart auto-negotiation or write ++ * YTPHY_MISC_CONFIG_REG. ++ * @phydev: target phy_device struct ++ * ++ * NOTE:The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_fiber_config_aneg(struct phy_device *phydev) ++{ ++ int err, changed = 0; ++ int bmcr; ++ u16 adv; ++ ++ if (phydev->autoneg != AUTONEG_ENABLE) ++ return yt8521_fiber_setup_forced(phydev); ++ ++ /* enable Fiber auto sensing */ ++ err = ytphy_modify_ext(phydev, YT8521_LINK_TIMER_CFG2_REG, ++ 0, YT8521_LTCR_EN_AUTOSEN); ++ if (err < 0) ++ return err; ++ ++ err = ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG, ++ YT8521_CCR_SW_RST, 0); ++ if (err < 0) ++ return err; ++ ++ bmcr = __phy_read(phydev, MII_BMCR); ++ if (bmcr < 0) ++ return bmcr; ++ ++ /* When it is coming from fiber forced mode, add bmcr power down ++ * and power up to let aneg work fine. ++ */ ++ if (!(bmcr & BMCR_ANENABLE)) { ++ __phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN); ++ usleep_range(1000, 1100); ++ __phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0); ++ } ++ ++ adv = linkmode_adv_to_mii_adv_x(phydev->advertising, ++ ETHTOOL_LINK_MODE_1000baseX_Full_BIT); ++ ++ /* Setup fiber advertisement */ ++ err = __phy_modify_changed(phydev, MII_ADVERTISE, ++ ADVERTISE_1000XHALF | ADVERTISE_1000XFULL | ++ ADVERTISE_1000XPAUSE | ++ ADVERTISE_1000XPSE_ASYM, ++ adv); ++ if (err < 0) ++ return err; ++ ++ if (err > 0) ++ changed = 1; ++ ++ return ytphy_check_and_restart_aneg(phydev, changed); ++} ++ ++/** ++ * ytphy_setup_master_slave ++ * @phydev: target phy_device struct ++ * ++ * NOTE: The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_setup_master_slave(struct phy_device *phydev) ++{ ++ u16 ctl = 0; ++ ++ if (!phydev->is_gigabit_capable) ++ return 0; ++ ++ switch (phydev->master_slave_set) { ++ case MASTER_SLAVE_CFG_MASTER_PREFERRED: ++ ctl |= CTL1000_PREFER_MASTER; ++ break; ++ case MASTER_SLAVE_CFG_SLAVE_PREFERRED: ++ break; ++ case MASTER_SLAVE_CFG_MASTER_FORCE: ++ ctl |= CTL1000_AS_MASTER; ++ fallthrough; ++ case MASTER_SLAVE_CFG_SLAVE_FORCE: ++ ctl |= CTL1000_ENABLE_MASTER; ++ break; ++ case MASTER_SLAVE_CFG_UNKNOWN: ++ case MASTER_SLAVE_CFG_UNSUPPORTED: ++ return 0; ++ default: ++ phydev_warn(phydev, "Unsupported Master/Slave mode\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ return __phy_modify_changed(phydev, MII_CTRL1000, ++ (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER | ++ CTL1000_PREFER_MASTER), ctl); ++} ++ ++/** ++ * ytphy_utp_config_advert - sanitize and advertise auto-negotiation parameters ++ * @phydev: target phy_device struct ++ * ++ * NOTE: Writes MII_ADVERTISE with the appropriate values, ++ * after sanitizing the values to make sure we only advertise ++ * what is supported. Returns < 0 on error, 0 if the PHY's advertisement ++ * hasn't changed, and > 0 if it has changed. ++ * The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_utp_config_advert(struct phy_device *phydev) ++{ ++ int err, bmsr, changed = 0; ++ u32 adv; ++ ++ /* Only allow advertising what this PHY supports */ ++ linkmode_and(phydev->advertising, phydev->advertising, ++ phydev->supported); ++ ++ adv = linkmode_adv_to_mii_adv_t(phydev->advertising); ++ ++ /* Setup standard advertisement */ ++ err = __phy_modify_changed(phydev, MII_ADVERTISE, ++ ADVERTISE_ALL | ADVERTISE_100BASE4 | ++ ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM, ++ adv); ++ if (err < 0) ++ return err; ++ if (err > 0) ++ changed = 1; ++ ++ bmsr = __phy_read(phydev, MII_BMSR); ++ if (bmsr < 0) ++ return bmsr; ++ ++ /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all ++ * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a ++ * logical 1. ++ */ ++ if (!(bmsr & BMSR_ESTATEN)) ++ return changed; ++ ++ adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising); ++ ++ err = __phy_modify_changed(phydev, MII_CTRL1000, ++ ADVERTISE_1000FULL | ADVERTISE_1000HALF, ++ adv); ++ if (err < 0) ++ return err; ++ if (err > 0) ++ changed = 1; ++ ++ return changed; ++} ++ ++/** ++ * ytphy_utp_config_aneg - restart auto-negotiation or write BMCR ++ * @phydev: target phy_device struct ++ * @changed: whether autoneg is requested ++ * ++ * NOTE: If auto-negotiation is enabled, we configure the ++ * advertising, and then restart auto-negotiation. If it is not ++ * enabled, then we write the BMCR. ++ * The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_utp_config_aneg(struct phy_device *phydev, bool changed) ++{ ++ int err; ++ u16 ctl; ++ ++ err = ytphy_setup_master_slave(phydev); ++ if (err < 0) ++ return err; ++ else if (err) ++ changed = true; ++ ++ if (phydev->autoneg != AUTONEG_ENABLE) { ++ /* configures/forces speed/duplex from @phydev */ ++ ++ ctl = mii_bmcr_encode_fixed(phydev->speed, phydev->duplex); ++ ++ return __phy_modify(phydev, MII_BMCR, ~(BMCR_LOOPBACK | ++ BMCR_ISOLATE | BMCR_PDOWN), ctl); ++ } ++ ++ err = ytphy_utp_config_advert(phydev); ++ if (err < 0) /* error */ ++ return err; ++ else if (err) ++ changed = true; ++ ++ return ytphy_check_and_restart_aneg(phydev, changed); ++} ++ ++/** ++ * yt8521_config_aneg_paged() - switch reg space then call genphy_config_aneg ++ * of one page ++ * @phydev: a pointer to a &struct phy_device ++ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to ++ * operate. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_config_aneg_paged(struct phy_device *phydev, int page) ++{ ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(fiber_supported); ++ struct yt8521_priv *priv = phydev->priv; ++ int old_page; ++ int ret = 0; ++ ++ page &= YT8521_RSSR_SPACE_MASK; ++ ++ old_page = phy_select_page(phydev, page); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ /* If reg_page is YT8521_RSSR_TO_BE_ARBITRATED, ++ * phydev->advertising should be updated. ++ */ ++ if (priv->reg_page == YT8521_RSSR_TO_BE_ARBITRATED) { ++ linkmode_zero(fiber_supported); ++ yt8521_prepare_fiber_features(phydev, fiber_supported); ++ ++ /* prepare fiber_supported, then setup advertising. */ ++ if (page == YT8521_RSSR_FIBER_SPACE) { ++ linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, ++ fiber_supported); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, ++ fiber_supported); ++ linkmode_and(phydev->advertising, ++ priv->combo_advertising, fiber_supported); ++ } else { ++ /* ETHTOOL_LINK_MODE_Autoneg_BIT is also used in utp */ ++ linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, ++ fiber_supported); ++ linkmode_andnot(phydev->advertising, ++ priv->combo_advertising, ++ fiber_supported); ++ } ++ } ++ ++ if (page == YT8521_RSSR_FIBER_SPACE) ++ ret = yt8521_fiber_config_aneg(phydev); ++ else ++ ret = ytphy_utp_config_aneg(phydev, false); ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ ++/** ++ * yt8521_config_aneg() - change reg space then call yt8521_config_aneg_paged ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_config_aneg(struct phy_device *phydev) ++{ ++ struct yt8521_priv *priv = phydev->priv; ++ int ret; ++ ++ if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ++ ret = yt8521_config_aneg_paged(phydev, priv->reg_page); ++ if (ret < 0) ++ return ret; ++ } else { ++ /* If reg_page is YT8521_RSSR_TO_BE_ARBITRATED, ++ * phydev->advertising need to be saved at first run. ++ * Because it contains the advertising which supported by both ++ * mac and yt8521(utp and fiber). ++ */ ++ if (linkmode_empty(priv->combo_advertising)) { ++ linkmode_copy(priv->combo_advertising, ++ phydev->advertising); ++ } ++ ++ ret = yt8521_config_aneg_paged(phydev, YT8521_RSSR_UTP_SPACE); ++ if (ret < 0) ++ return ret; ++ ++ ret = yt8521_config_aneg_paged(phydev, YT8521_RSSR_FIBER_SPACE); ++ if (ret < 0) ++ return ret; ++ ++ /* we don't known which will be link, so restore ++ * phydev->advertising as default value. ++ */ ++ linkmode_copy(phydev->advertising, priv->combo_advertising); ++ } ++ return 0; ++} ++ ++/** ++ * yt8521_aneg_done_paged() - determines the auto negotiation result of one ++ * page. ++ * @phydev: a pointer to a &struct phy_device ++ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to ++ * operate. ++ * ++ * returns 0(no link)or 1(fiber or utp link) or negative errno code ++ */ ++static int yt8521_aneg_done_paged(struct phy_device *phydev, int page) ++{ ++ int old_page; ++ int ret = 0; ++ int link; ++ ++ old_page = phy_select_page(phydev, page & YT8521_RSSR_SPACE_MASK); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ ret = __phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG); ++ if (ret < 0) ++ goto err_restore_page; ++ ++ link = !!(ret & YTPHY_SSR_LINK); ++ ret = link; ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ ++/** ++ * yt8521_aneg_done() - determines the auto negotiation result ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0(no link)or 1(fiber or utp link) or negative errno code ++ */ ++static int yt8521_aneg_done(struct phy_device *phydev) ++{ ++ struct yt8521_priv *priv = phydev->priv; ++ int link_fiber = 0; ++ int link_utp; ++ int link; ++ ++ if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ++ link = yt8521_aneg_done_paged(phydev, priv->reg_page); ++ } else { ++ link_utp = yt8521_aneg_done_paged(phydev, ++ YT8521_RSSR_UTP_SPACE); ++ if (link_utp < 0) ++ return link_utp; ++ ++ if (!link_utp) { ++ link_fiber = yt8521_aneg_done_paged(phydev, ++ YT8521_RSSR_FIBER_SPACE); ++ if (link_fiber < 0) ++ return link_fiber; ++ } ++ link = link_fiber || link_utp; ++ phydev_info(phydev, "%s, link_fiber: %d, link_utp: %d\n", ++ __func__, link_fiber, link_utp); ++ } ++ ++ return link; ++} ++ ++/** ++ * ytphy_utp_read_abilities - read PHY abilities from Clause 22 registers ++ * @phydev: target phy_device struct ++ * ++ * NOTE: Reads the PHY's abilities and populates ++ * phydev->supported accordingly. ++ * The caller must have taken the MDIO bus lock. ++ * ++ * returns 0 or negative errno code ++ */ ++static int ytphy_utp_read_abilities(struct phy_device *phydev) ++{ ++ int val; ++ ++ linkmode_set_bit_array(phy_basic_ports_array, ++ ARRAY_SIZE(phy_basic_ports_array), ++ phydev->supported); ++ ++ val = __phy_read(phydev, MII_BMSR); ++ if (val < 0) ++ return val; ++ ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported, ++ val & BMSR_ANEGCAPABLE); ++ ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, phydev->supported, ++ val & BMSR_100FULL); ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev->supported, ++ val & BMSR_100HALF); ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, phydev->supported, ++ val & BMSR_10FULL); ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, phydev->supported, ++ val & BMSR_10HALF); ++ ++ if (val & BMSR_ESTATEN) { ++ val = __phy_read(phydev, MII_ESTATUS); ++ if (val < 0) ++ return val; ++ ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, ++ phydev->supported, val & ESTATUS_1000_TFULL); ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, ++ phydev->supported, val & ESTATUS_1000_THALF); ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, ++ phydev->supported, val & ESTATUS_1000_XFULL); ++ } ++ ++ return 0; ++} ++ ++/** ++ * yt8521_get_features_paged() - read supported link modes for one page ++ * @phydev: a pointer to a &struct phy_device ++ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to ++ * operate. ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_get_features_paged(struct phy_device *phydev, int page) ++{ ++ int old_page; ++ int ret = 0; ++ ++ page &= YT8521_RSSR_SPACE_MASK; ++ old_page = phy_select_page(phydev, page); ++ if (old_page < 0) ++ goto err_restore_page; ++ ++ if (page == YT8521_RSSR_FIBER_SPACE) { ++ linkmode_zero(phydev->supported); ++ yt8521_prepare_fiber_features(phydev, phydev->supported); ++ } else { ++ ret = ytphy_utp_read_abilities(phydev); ++ if (ret < 0) ++ goto err_restore_page; ++ } ++ ++err_restore_page: ++ return phy_restore_page(phydev, old_page, ret); ++} ++ ++/** ++ * yt8521_get_features - switch reg space then call yt8521_get_features_paged ++ * @phydev: target phy_device struct ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8521_get_features(struct phy_device *phydev) ++{ ++ struct yt8521_priv *priv = phydev->priv; ++ int ret; ++ ++ if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ++ ret = yt8521_get_features_paged(phydev, priv->reg_page); ++ } else { ++ ret = yt8521_get_features_paged(phydev, ++ YT8521_RSSR_UTP_SPACE); ++ if (ret < 0) ++ return ret; ++ ++ /* add fiber's features to phydev->supported */ ++ yt8521_prepare_fiber_features(phydev, phydev->supported); ++ } ++ return ret; ++} ++ + static struct phy_driver motorcomm_phy_drvs[] = { + { + PHY_ID_MATCH_EXACT(PHY_ID_YT8511), +@@ -121,16 +1733,35 @@ static struct phy_driver motorcomm_phy_drvs[] = { + .read_page = yt8511_read_page, + .write_page = yt8511_write_page, + }, ++ { ++ PHY_ID_MATCH_EXACT(PHY_ID_YT8521), ++ .name = "YT8521 Gigabit Ethernet", ++ .get_features = yt8521_get_features, ++ .probe = yt8521_probe, ++ .read_page = yt8521_read_page, ++ .write_page = yt8521_write_page, ++ .get_wol = ytphy_get_wol, ++ .set_wol = ytphy_set_wol, ++ .config_aneg = yt8521_config_aneg, ++ .aneg_done = yt8521_aneg_done, ++ .config_init = yt8521_config_init, ++ .read_status = yt8521_read_status, ++ .soft_reset = yt8521_soft_reset, ++ .suspend = yt8521_suspend, ++ .resume = yt8521_resume, ++ }, + }; + + module_phy_driver(motorcomm_phy_drvs); + +-MODULE_DESCRIPTION("Motorcomm PHY driver"); ++MODULE_DESCRIPTION("Motorcomm 8511/8521 PHY driver"); + MODULE_AUTHOR("Peter Geis"); ++MODULE_AUTHOR("Frank"); + MODULE_LICENSE("GPL"); + + static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = { + { PHY_ID_MATCH_EXACT(PHY_ID_YT8511) }, ++ { PHY_ID_MATCH_EXACT(PHY_ID_YT8521) }, + { /* sentinal */ } + }; + diff --git a/target/linux/rockchip/patches-6.0/108-net-phy-add-support-for-Motorcomm-yt8531C-phy.patch b/target/linux/rockchip/patches-6.0/108-net-phy-add-support-for-Motorcomm-yt8531C-phy.patch index 66dc89728..842047d87 100644 --- a/target/linux/rockchip/patches-6.0/108-net-phy-add-support-for-Motorcomm-yt8531C-phy.patch +++ b/target/linux/rockchip/patches-6.0/108-net-phy-add-support-for-Motorcomm-yt8531C-phy.patch @@ -15,15 +15,15 @@ Signed-off-by: Furkan Kardame --- a/drivers/net/phy/motorcomm.c +++ b/drivers/net/phy/motorcomm.c -@@ -10,6 +10,7 @@ - #include +@@ -13,6 +13,7 @@ #define PHY_ID_YT8511 0x0000010a + #define PHY_ID_YT8521 0x0000011A +#define PHY_ID_YT8531 0x4f51e91b - #define YT8511_PAGE_SELECT 0x1e - #define YT8511_PAGE 0x1f -@@ -38,6 +39,38 @@ + /* YT8521 Register Overview + * UTP Register space | FIBER Register space +@@ -129,6 +130,38 @@ #define YT8511_DELAY_FE_TX_EN (0xf << 12) #define YT8511_DELAY_FE_TX_DIS (0x2 << 12) @@ -59,11 +59,11 @@ Signed-off-by: Furkan Kardame + */ +#define YT8531_CLKCFG_125M (BIT(6) | BIT(4) | (0x0 < 1)) + - static int yt8511_read_page(struct phy_device *phydev) - { - return __phy_read(phydev, YT8511_PAGE_SELECT); -@@ -111,6 +144,51 @@ err_restore_page: - return phy_restore_page(phydev, oldpage, ret); + /* Extended register is different from MMD Register and MII Register. + * We can use ytphy_read_ext/ytphy_write_ext/ytphy_modify_ext function to + * operate extended register. +@@ -1723,6 +1756,51 @@ err_restore_page: + return ret; } +static int yt8531_config_init(struct phy_device *phydev) @@ -114,10 +114,10 @@ Signed-off-by: Furkan Kardame static struct phy_driver motorcomm_phy_drvs[] = { { PHY_ID_MATCH_EXACT(PHY_ID_YT8511), -@@ -120,7 +198,16 @@ static struct phy_driver motorcomm_phy_d - .resume = genphy_resume, - .read_page = yt8511_read_page, - .write_page = yt8511_write_page, +@@ -1749,7 +1827,16 @@ static struct phy_driver motorcomm_phy_d + .soft_reset = yt8521_soft_reset, + .suspend = yt8521_suspend, + .resume = yt8521_resume, + }, { + PHY_ID_MATCH_EXACT(PHY_ID_YT8531), + .name = "YT8531 Gigabit Ethernet", @@ -131,10 +131,10 @@ Signed-off-by: Furkan Kardame }; module_phy_driver(motorcomm_phy_drvs); -@@ -131,6 +218,7 @@ MODULE_LICENSE("GPL"); - +@@ -1762,6 +1849,7 @@ MODULE_LICENSE("GPL"); static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = { { PHY_ID_MATCH_EXACT(PHY_ID_YT8511) }, + { PHY_ID_MATCH_EXACT(PHY_ID_YT8521) }, + { PHY_ID_MATCH_EXACT(PHY_ID_YT8531) }, { /* sentinal */ } };