mirror of
https://github.com/coolsnowwolf/lede.git
synced 2025-04-16 04:13:31 +00:00
mediatek: filogic: add support for CMCC RAX3000M (NAND and eMMC version)
This commit is contained in:
coolsnowwolf
parent
6606bb39b6
commit
eb3e9ad2e3
42
target/linux/mediatek/dts/mt7981b-cmcc-rax3000m-emmc.dts
Normal file
42
target/linux/mediatek/dts/mt7981b-cmcc-rax3000m-emmc.dts
Normal file
@ -0,0 +1,42 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
#include "mt7981b-cmcc-rax3000m.dts"
|
||||
|
||||
/ {
|
||||
model = "CMCC RAX3000M (eMMC version)";
|
||||
compatible = "cmcc,rax3000m-emmc", "mediatek,mt7981";
|
||||
|
||||
chosen {
|
||||
bootargs = "root=PARTLABEL=rootfs rootwait rootfstype=squashfs,f2fs";
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
bus-width = <8>;
|
||||
max-frequency = <26000000>;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&mmc0_pins_default>;
|
||||
pinctrl-1 = <&mmc0_pins_uhs>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
mmc0_pins_default: mmc0-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "emmc_45";
|
||||
};
|
||||
};
|
||||
|
||||
mmc0_pins_uhs: mmc0-uhs-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "emmc_45";
|
||||
};
|
||||
};
|
||||
};
|
||||
92
target/linux/mediatek/dts/mt7981b-cmcc-rax3000m-nand.dts
Normal file
92
target/linux/mediatek/dts/mt7981b-cmcc-rax3000m-nand.dts
Normal file
@ -0,0 +1,92 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
#include "mt7981b-cmcc-rax3000m.dts"
|
||||
|
||||
/ {
|
||||
model = "CMCC RAX3000M (NAND version)";
|
||||
compatible = "cmcc,rax3000m-nand", "mediatek,mt7981";
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac1;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand: flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
mediatek,nmbm;
|
||||
mediatek,bmt-max-ratio = <1>;
|
||||
mediatek,bmt-max-reserved-blocks = <64>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "bl2";
|
||||
reg = <0x00000 0x0100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x100000 0x80000>;
|
||||
};
|
||||
|
||||
factory: partition@180000 {
|
||||
label = "factory";
|
||||
reg = <0x180000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "fip";
|
||||
reg = <0x380000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x580000 0x7200000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-up-adv = <0>; /* bias-disable */
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-up-adv = <0>; /* bias-disable */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
};
|
||||
156
target/linux/mediatek/dts/mt7981b-cmcc-rax3000m.dts
Normal file
156
target/linux/mediatek/dts/mt7981b-cmcc-rax3000m.dts
Normal file
@ -0,0 +1,156 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright (C) 2023 Tianling Shen <cnsztl@immortalwrt.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "mt7981.dtsi"
|
||||
|
||||
/ {
|
||||
model = "CMCC RAX3000M";
|
||||
compatible = "cmcc,rax3000m", "mediatek,mt7981";
|
||||
|
||||
aliases {
|
||||
led-boot = &red_led;
|
||||
led-failsafe = &red_led;
|
||||
led-running = &green_led;
|
||||
led-upgrade = &green_led;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000 0 0x20000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button-mesh {
|
||||
label = "mesh";
|
||||
linux,code = <BTN_9>;
|
||||
linux,input-type = <EV_SW>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
green_led: led-0 {
|
||||
label = "green:status";
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
label = "blue:status";
|
||||
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
red_led: led-2 {
|
||||
label = "red:status";
|
||||
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
switch: switch@1f {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <31>;
|
||||
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "okay";
|
||||
};
|
||||
@ -9,6 +9,7 @@ mediatek_setup_interfaces()
|
||||
|
||||
case $board in
|
||||
abt,asr3000|\
|
||||
cmcc,rax3000m*|\
|
||||
h3c,magic-nx30-pro|\
|
||||
imou,lc-hx3001)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
|
||||
@ -76,6 +77,16 @@ mediatek_setup_macs()
|
||||
bananapi,bpi-r3)
|
||||
wan_mac=$(macaddr_add $(cat /sys/class/net/eth0/address) 1)
|
||||
;;
|
||||
cmcc,rax3000m-emmc)
|
||||
wan_mac=$(mmc_get_mac_binary factory 0x2a)
|
||||
lan_mac=$(mmc_get_mac_binary factory 0x24)
|
||||
label_mac=$wan_mac
|
||||
;;
|
||||
cmcc,rax3000m-nand)
|
||||
wan_mac=$(mtd_get_mac_binary factory 0x2a)
|
||||
lan_mac=$(mtd_get_mac_binary factory 0x24)
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
glinet,gl-mt2500)
|
||||
label_mac="$(get_mac_binary "/dev/mmcblk0boot1" 0xa)"
|
||||
wan_mac="$label_mac"
|
||||
|
||||
@ -7,6 +7,13 @@
|
||||
board=$(board_name)
|
||||
|
||||
case "$FIRMWARE" in
|
||||
"mediatek/mt7981_eeprom_mt7976_dbdc.bin")
|
||||
case "$board" in
|
||||
cmcc,rax3000m-emmc)
|
||||
caldata_extract_mmc "factory" 0x0 0x1000
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"mediatek/mt7986_eeprom_mt7976_dbdc.bin")
|
||||
case "$board" in
|
||||
asus,tuf-ax4200)
|
||||
|
||||
@ -29,6 +29,7 @@ platform_do_upgrade() {
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
cmcc,rax3000m-emmc|\
|
||||
glinet,gl-mt2500|\
|
||||
glinet,gl-mt6000|\
|
||||
jdcloud,re-cs-05)
|
||||
@ -76,6 +77,7 @@ platform_copy_config() {
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
cmcc,rax3000m-emmc|\
|
||||
glinet,gl-mt2500|\
|
||||
glinet,gl-mt6000|\
|
||||
jdcloud,re-cs-05)
|
||||
|
||||
@ -160,6 +160,41 @@ define Device/cetron_ct3003-mod
|
||||
endef
|
||||
TARGET_DEVICES += cetron_ct3003-mod
|
||||
|
||||
define Device/cmcc_rax3000m-emmc
|
||||
DEVICE_VENDOR := CMCC
|
||||
DEVICE_MODEL := RAX3000M (eMMC version)
|
||||
DEVICE_DTS := mt7981b-cmcc-rax3000m-emmc
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 \
|
||||
automount f2fsck mkf2fs
|
||||
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
||||
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += cmcc_rax3000m-emmc
|
||||
|
||||
define Device/cmcc_rax3000m-nand
|
||||
DEVICE_VENDOR := CMCC
|
||||
DEVICE_MODEL := RAX3000M (NAND version)
|
||||
DEVICE_DTS := mt7981b-cmcc-rax3000m-nand
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 automount
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
IMAGE_SIZE := 116736k
|
||||
KERNEL_IN_UBI := 1
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
KERNEL = kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
||||
KERNEL_INITRAMFS = kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
|
||||
endef
|
||||
TARGET_DEVICES += cmcc_rax3000m-nand
|
||||
|
||||
define Device/fzs_5gcpe-p3
|
||||
DEVICE_VENDOR := FZS
|
||||
DEVICE_MODEL := 5GCPE P3
|
||||
|
||||
Loading…
Reference in New Issue
Block a user