mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX)

target/linux/mediatek/dts/mt7981a-glinet-gl-x3000-xe3000-common.dtsi

@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "mt7981.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=PARTLABEL=rootfs rootwait";
+	};
+
+	aliases {
+		label-mac-device = &gmac0;
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	fan_5v: regulator-fan-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fan";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+
+		hub_power {
+			gpio-export,name = "hub_power";
+			gpio-export,output = <1>;
+			gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		5G_power {
+			gpio-export,name = "5G_power";
+			gpio-export,output = <1>;
+			gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		5G_control {
+			gpio-export,name = "5G_control";
+			gpio-export,output = <1>;
+			gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		5G_reset {
+			gpio-export,name = "5G_reset";
+			gpio-export,output = <0>;
+			gpios = <&pio 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wifi2g {
+			label = "green:wifi2g";
+			gpios = <&pio 30 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi5g {
+			label = "green:wifi5g";
+			gpios = <&pio 38 GPIO_ACTIVE_LOW>;
+		};
+
+		5g_led1 {
+			label = "green:5g:led1";
+			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		5g_led2 {
+			label = "green:5g:led2";
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+		};
+
+		5g_led3 {
+			label = "green:5g:led3";
+			gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+		};
+
+		5g_led4 {
+			label = "green:5g:led4";
+			gpios = <&pio 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_power: power {
+			label = "green:power";
+			gpios = <&pio 39 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			label = "green:wan";
+			gpios = <&pio 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <52000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+
+	card@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+
+		block {
+			compatible = "block-device";
+			partitions {
+				block-partition-env {
+					partname = "u-boot-env";
+
+					nvmem-layout {
+						compatible = "u-boot,env-layout";
+					};
+				};
+
+				block-partition-factory {
+					partname = "factory";
+
+					nvmem-layout {
+						compatible = "fixed-layout";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						eeprom_factory_0: eeprom@0 {
+							reg = <0x0 0x1000>;
+						};
+
+						macaddr_factory_a: macaddr@a {
+							compatible = "mac-base";
+							reg = <0xa 0x6>;
+							#nvmem-cell-cells = <1>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&mdio_bus {
+	reset-gpios = <&pio 14 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <600>;
+	reset-post-delay-us = <20000>;
+
+	phy5: ethernet-phy@5 {
+		reg = <5>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy5>;
+		nvmem-cells = <&macaddr_factory_a 0>;
+		nvmem-cell-names = "mac-address";
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "gmii";
+		phy-handle = <&int_gbe_phy>;
+		nvmem-cells = <&macaddr_factory_a 1>;
+		nvmem-cell-names = "mac-address";
+	};
+};
+
+&pio {
+	mmc0_pins_default: mmc0-pins-default {
+		mux {
+			function = "flash";
+			groups = "emmc_8";
+		};
+	};
+	mmc0_pins_uhs: mmc0-pins-uhs {
+		mux {
+			function = "flash";
+			groups = "emmc_8";
+		};
+	};
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_pereset", "pcie_clk", "pcie_wake";
+		};
+	};
+	pwm0_pin: pwm0-pin-g0 {
+		mux {
+			function = "pwm";
+			groups = "pwm0_1";
+		};
+	};
+};
+
+&xhci {
+	phys = <&u2port0 PHY_TYPE_USB2>;
+	vbus-supply = <&reg_5v>;
+	mediatek,u3p-dis-msk = <0x01>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+};
+
+&wifi {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+	status = "okay";
+};
+
+&fan {
+	pwms = <&pwm 0 40000 0>;
+	fan-supply = <&fan_5v>;
+	interrupt-parent = <&pio>;
+	interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+	status = "okay";
+};

target/linux/mediatek/dts/mt7981a-glinet-gl-x3000.dts

@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7981a-glinet-gl-x3000-xe3000-common.dtsi"
+
+/ {
+	model = "GL.iNet GL-X3000";
+	compatible = "glinet,gl-x3000", "mediatek,mt7981";
+};

target/linux/mediatek/dts/mt7981a-glinet-gl-xe3000.dts

@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7981a-glinet-gl-x3000-xe3000-common.dtsi"
+
+/ {
+	model = "GL.iNet GL-XE3000";
+	compatible = "glinet,gl-xe3000", "mediatek,mt7981";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&pio {
+	uart1_pins: uart1-pins-g1 {
+		mux {
+			function = "uart";
+			groups = "uart1_3";
+		};
+	};
+};

target/linux/mediatek/filogic/base-files/etc/board.d/01_leds

@@ -23,6 +23,17 @@ hf,m7986r1*)
 	ucidef_set_led_netdev "led-4" "LAN4" "led-4" "lan4"
 	ucidef_set_led_netdev "led-5" "WWAN" "led-5" "usb0"
 	;;
+glinet,gl-x3000|\
+glinet,gl-xe3000)
+	ucidef_set_led_default "power" "POWER" "green:power" "1"
+	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
+	ucidef_set_led_netdev "5g_1" "5G_1" "green:5g:led1" "wwan0"
+	ucidef_set_led_netdev "5g_2" "5G_2" "green:5g:led2" "wwan0"
+	ucidef_set_led_netdev "5g_3" "5G_3" "green:5g:led3" "wwan0"
+	ucidef_set_led_netdev "5g_4" "5G_4" "green:5g:led4" "wwan0"
+	ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wifi2g" "phy0-ap0"
+	ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wifi5g" "phy1-ap0"
+	;;
 imou,lc-hx3001|\
 nokia,ea0326gmp)
 	ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan"

target/linux/mediatek/filogic/base-files/etc/board.d/02_network

@@ -36,6 +36,8 @@ mediatek_setup_interfaces()
 		;;
 	glinet,gl-mt2500|\
 	glinet,gl-mt3000|\
+	glinet,gl-x3000|\
+	glinet,gl-xe3000|\
 	openembed,som7981)
 		ucidef_set_interfaces_lan_wan eth1 eth0
 		;;

target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac

@@ -41,7 +41,9 @@ case "$board" in
 		[ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 2) > /sys${DEVPATH}/macaddress
 		;;
-	glinet,gl-mt6000)
+	glinet,gl-mt6000|\
+	glinet,gl-x3000|\
+	glinet,gl-xe3000)
 		addr=$(mmc_get_mac_binary factory 0x04)
 		[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress

target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh

@@ -45,6 +45,8 @@ platform_do_upgrade() {
 	cmcc,rax3000m-emmc|\
 	glinet,gl-mt2500|\
 	glinet,gl-mt6000|\
+	glinet,gl-x3000|\
+	glinet,gl-xe3000|\
 	hf,m7986r1-emmc|\
 	jdcloud,re-cs-05)
 		CI_KERNPART="kernel"
@@ -98,6 +100,8 @@ platform_copy_config() {
 	cmcc,rax3000m-emmc|\
 	glinet,gl-mt2500|\
 	glinet,gl-mt6000|\
+	glinet,gl-x3000|\
+	glinet,gl-xe3000|\
 	hf,m7986r1-emmc|\
 	jdcloud,re-cs-05)
 		emmc_copy_config

target/linux/mediatek/image/filogic.mk

@@ -324,6 +324,31 @@ define Device/glinet_gl-mt6000
 endef
 TARGET_DEVICES += glinet_gl-mt6000
 
+define Device/glinet_gl-x3000-xe3000-common
+  DEVICE_VENDOR := GL.iNet
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware mkf2fs \
+    kmod-fs-f2fs kmod-hwmon-pwmfan kmod-usb3 kmod-usb-serial-option \
+    kmod-usb-storage kmod-usb-net-qmi-wwan uqmi
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
+define Device/glinet_gl-x3000
+  DEVICE_MODEL := GL-X3000
+  DEVICE_DTS := mt7981a-glinet-gl-x3000
+  SUPPORTED_DEVICES := glinet,gl-x3000
+  $(call Device/glinet_gl-x3000-xe3000-common)
+endef
+TARGET_DEVICES += glinet_gl-x3000
+
+define Device/glinet_gl-xe3000
+  DEVICE_MODEL := GL-XE3000
+  DEVICE_DTS := mt7981a-glinet-gl-xe3000
+  SUPPORTED_DEVICES := glinet,gl-xe3000
+  $(call Device/glinet_gl-x3000-xe3000-common)
+endef
+TARGET_DEVICES += glinet_gl-xe3000
+
 define Device/h3c_magic-nx30-pro
   DEVICE_VENDOR := H3C
   DEVICE_MODEL := Magic NX30 Pro