ramips: add HT-JSH-0211 support

Replace the boot loader to the breed of K2P.

target/linux/ramips/Makefile

@@ -18,6 +18,6 @@ define Target/Description
 endef
 
 include $(INCLUDE_DIR)/target.mk
-DEFAULT_PACKAGES += kmod-leds-gpio kmod-gpio-button-hotplug
+DEFAULT_PACKAGES += kmod-leds-gpio kmod-gpio-button-hotplug -procd-ujail
 
 $(eval $(call BuildTarget))

target/linux/ramips/dts/mt7621_ht-jsh_0211.dts

@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "ht-jsh,0211", "mediatek,mt7621-soc";
+	model = "HT-JSH-0211";
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Bootloader";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "Config";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "Factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0>;
+	};
+};
+
+&gmac0 {
+	mtd-mac-address = <&factory 0xe000>;
+};
+
+&gmac1 {
+	mtd-mac-address = <&factory 0xe006>;
+	status = "okay";
+};
+
+&gsw {
+	mediatek,portmap = "wllll";
+	status = "okay";
+};
+
+&hnat {
+	mtketh-wan = "eth1";
+	mtketh-ppd = "eth0";
+	mtketh-lan = "eth0";
+	mtketh-max-gmac = <2>;
+	/delete-property/ mtkdsa-wan-port;
+};
+
+&switch0 {
+	status = "disabled";
+};
+
+&state_default {
+	gpio {
+		groups = "i2c";
+		function = "gpio";
+	};
+};

target/linux/ramips/image/mt7621.mk

@@ -802,6 +802,15 @@ define Device/hiwifi_hc5962
 endef
 TARGET_DEVICES += hiwifi_hc5962
 
+define Device/ht-jsh_0211
+  $(Device/dsa-migration)
+  IMAGE_SIZE := 16064k
+  DEVICE_VENDOR := HT-JSH
+  DEVICE_MODEL := 0211
+  DEVICE_PACKAGES := kmod-mt7603
+endef
+TARGET_DEVICES += ht-jsh_0211
+
 define Device/iodata_wn-ax1167gr
   $(Device/dsa-migration)
   $(Device/uimage-lzma-loader)

target/linux/ramips/mt7621/base-files/etc/board.d/02_network

@@ -65,6 +65,10 @@ ramips_setup_interfaces()
 	hatlab,gateboard-one)
 		ucidef_set_interfaces_lan_wan "eth0 eth1 eth2 eth3 eth4" "eth5"
 		;;
+	ht-jsh,0211)
+		ucidef_add_switch "switch0" \
+			"0:wan" "2:lan" "3:lan" "6u@eth0" "5u@eth1"
+		;;
 	linksys,re6500|\
 	netgear,wac104)
 		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"