mirror of
https://github.com/coolsnowwolf/lede.git
synced 2025-04-16 14:23:38 +00:00
rockchip: add FriendlyElec NanoPi R5C support
This commit is contained in:
parent
977bf86ccd
commit
e0e0e9c9cb
@ -164,6 +164,7 @@ define U-Boot/nanopi-r5s-rk3568
|
||||
BUILD_SUBTARGET:=armv8
|
||||
NAME:=NanoPi R5S
|
||||
BUILD_DEVICES:= \
|
||||
friendlyarm_nanopi-r5c \
|
||||
friendlyarm_nanopi-r5s
|
||||
DEPENDS:=+PACKAGE_u-boot-nanopi-r5s-rk3568:arm-trusted-firmware-rk3568
|
||||
PKG_BUILD_DEPENDS:=arm-trusted-firmware-rockchip-vendor
|
||||
|
@ -18,6 +18,7 @@ xunlong,orangepi-r1-plus-lts)
|
||||
;;
|
||||
friendlyarm,nanopi-r4s|\
|
||||
friendlyarm,nanopi-r4se|\
|
||||
friendlyarm,nanopi-r5c|\
|
||||
sharevdi,guangmiao-g4c)
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
|
||||
ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth1"
|
||||
|
@ -28,6 +28,7 @@ rockchip_setup_interfaces()
|
||||
;;
|
||||
fastrhino,r66s|\
|
||||
firefly,rk3568-roc-pc|\
|
||||
friendlyarm,nanopi-r5c|\
|
||||
radxa,e25)
|
||||
ucidef_set_interfaces_lan_wan 'eth0' 'eth1'
|
||||
;;
|
||||
@ -91,6 +92,7 @@ rockchip_setup_macs()
|
||||
friendlyarm,nanopi-r2c|\
|
||||
friendlyarm,nanopi-r2s|\
|
||||
friendlyarm,nanopi-r5s|\
|
||||
friendlyarm,nanopi-r5c|\
|
||||
sharevdi,guangmiao-g4c|\
|
||||
rocktech,mpc1903)
|
||||
wan_mac=$(generate_mac_from_mmc_cid)
|
||||
|
@ -29,6 +29,7 @@ set_interface_core() {
|
||||
|
||||
case "$(board_name)" in
|
||||
fastrhino,r66s|\
|
||||
friendlyarm,nanopi-r5c|\
|
||||
firefly,rk3568-roc-pc)
|
||||
set_interface_core 2 "eth0"
|
||||
set_interface_core 4 "eth1"
|
||||
|
688
target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
Executable file
688
target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
Executable file
@ -0,0 +1,688 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
|
||||
* (http://www.friendlyarm.com)
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
model = "FriendlyElec NanoPi R5C";
|
||||
compatible = "friendlyarm,nanopi-r5c","rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &rtl8125_1;
|
||||
ethernet1 = &rtl8125_2;
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdhci;
|
||||
|
||||
led-boot = &sys_led;
|
||||
led-failsafe = &sys_led;
|
||||
led-running = &sys_led;
|
||||
led-upgrade = &sys_led;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
#ifdef DTS_NO_LEGACY
|
||||
hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
#endif
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&sys_led_pin>, <&lan_led_pin>,
|
||||
<&wan_led_pin>, <&wlan_led_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
sys_led: led-0 {
|
||||
gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
label = "red:power";
|
||||
};
|
||||
|
||||
wan_led: led-1 {
|
||||
gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
label = "green:wan";
|
||||
};
|
||||
|
||||
lan_led: led-2 {
|
||||
gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
label = "green:lan";
|
||||
};
|
||||
|
||||
wlan_led: led-3 {
|
||||
gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
label = "green:wlan";
|
||||
};
|
||||
};
|
||||
|
||||
vdd_5v: vdd-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_5v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vdd_5v>;
|
||||
};
|
||||
|
||||
vcc3v3_sysp: vcc3v3-sysp {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sysp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vdd_5v>;
|
||||
};
|
||||
|
||||
vcc5v0_sysp: vcc5v0-sysp {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sysp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc3v3_sysp>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_host: vcc5v0-usb-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_host_en>;
|
||||
regulator-name = "vcc5v0_usb_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sysp>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg: vcc5v0-usb-otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
||||
regulator-name = "vcc5v0_usb_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sysp>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
#ifdef DTS_NO_LEGACY
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vdda0v9_image>;
|
||||
avdd-1v8-supply = <&vcca1v8_image>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
#endif
|
||||
|
||||
&i2c0 {
|
||||
i2c-scl-rising-time-ns = <160>;
|
||||
i2c-scl-falling-time-ns = <30>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1390000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
i2c-scl-rising-time-ns = <160>;
|
||||
i2c-scl-falling-time-ns = <30>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
hym8563: hym8563@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "xin32k";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
};
|
||||
};
|
||||
|
||||
#ifdef DTS_NO_LEGACY
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
#endif
|
||||
|
||||
&pcie2x1 {
|
||||
num-lanes = <1>;
|
||||
num-viewport = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&m2_w_disable_pin>;
|
||||
reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
data-lanes = <1 2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x1 {
|
||||
bus-range = <0x10 0x1f>;
|
||||
num-lanes = <1>;
|
||||
reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
|
||||
pcie@10 {
|
||||
reg = <0x00100000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
rtl8125_1: pcie-eth@10,0 {
|
||||
compatible = "pci10ec,8125";
|
||||
reg = <0x000000 0 0 0 0>;
|
||||
|
||||
realtek,led-data = <0x4078>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie3x2 {
|
||||
bus-range = <0x20 0x2f>;
|
||||
num-lanes = <1>;
|
||||
reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
|
||||
pcie@20 {
|
||||
reg = <0x00200000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
rtl8125_2: pcie-eth@20,0 {
|
||||
compatible = "pci10ec,8125";
|
||||
reg = <0x000000 0 0 0 0>;
|
||||
|
||||
realtek,led-data = <0x4078>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&pinctrl {
|
||||
leds {
|
||||
sys_led_pin: sys-led-pin {
|
||||
rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
lan_led_pin: lan-led-pin {
|
||||
rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wan_led_pin: wan-led-pin {
|
||||
rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wlan_led_pin: wlan-led-pin {
|
||||
rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
m2-pins {
|
||||
m2_w_disable_pin: m2-w-disable-pin {
|
||||
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_usb_host_en: vcc5v0_usb_host_en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&rng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
#ifdef DTS_NO_LEGACY
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
#endif
|
@ -130,6 +130,16 @@ define Device/friendlyarm_nanopi-r4se
|
||||
endef
|
||||
TARGET_DEVICES += friendlyarm_nanopi-r4se
|
||||
|
||||
define Device/friendlyarm_nanopi-r5c
|
||||
DEVICE_VENDOR := FriendlyARM
|
||||
DEVICE_MODEL := NanoPi R5C
|
||||
SOC := rk3568
|
||||
UBOOT_DEVICE_NAME := nanopi-r5s-rk3568
|
||||
IMAGE/sysupgrade.img.gz := boot-common | boot-script nanopi-r5s | pine64-img | gzip | append-metadata
|
||||
DEVICE_PACKAGES := kmod-r8125 kmod-nvme kmod-scsi-core
|
||||
endef
|
||||
TARGET_DEVICES += friendlyarm_nanopi-r5c
|
||||
|
||||
define Device/friendlyarm_nanopi-r5s
|
||||
DEVICE_VENDOR := FriendlyARM
|
||||
DEVICE_MODEL := NanoPi R5S
|
||||
|
@ -1,12 +1,13 @@
|
||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||||
@@ -59,3 +59,15 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sa
|
||||
@@ -59,3 +59,16 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sa
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-photonicat.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-mrkaio-m68s.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-mrkaio-m68s-plus.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-opc-h66k.dtb
|
||||
|
@ -1,6 +1,6 @@
|
||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||||
@@ -79,3 +79,14 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-so
|
||||
@@ -79,3 +79,15 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-so
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
||||
@ -9,6 +9,7 @@
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-mrkaio-m68s.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-mrkaio-m68s-plus.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-opc-h66k.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-opc-h68k.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-opc-h69k.dtb
|
||||
|
Loading…
Reference in New Issue
Block a user