mirror of
https://github.com/coolsnowwolf/lede.git
synced 2025-04-14 11:13:29 +00:00
rockchip: sync rk3588 dts with upstream
Some checks failed
OpenWrt-CI / Build OpenWrt Firmware (push) Failing after 4s
Some checks failed
OpenWrt-CI / Build OpenWrt Firmware (push) Failing after 4s
Fixes: #13425
This commit is contained in:
coolsnowwolf
parent
efbab19385
commit
d0efae101c
@ -1,11 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
@ -26,7 +24,7 @@
|
||||
compatible = "audio-graph-card";
|
||||
dais = <&i2s0_8ch_p0>;
|
||||
label = "rk3588-es8316";
|
||||
hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_detect>;
|
||||
routing = "MIC2", "Mic Jack",
|
||||
@ -36,23 +34,23 @@
|
||||
"Headphone", "Headphones";
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_green_pin>, <&led_red_pin>;
|
||||
pinctrl-0 = <&led_rgb_g>;
|
||||
|
||||
led_status_green: led-0 {
|
||||
led_green: led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led_status_red: led-1 {
|
||||
led_red: led-1 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
linux,default-trigger = "none";
|
||||
};
|
||||
};
|
||||
|
||||
@ -64,37 +62,27 @@
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-name = "vcc3v3_pcie2x1l2";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
||||
vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie30_pwren_h>;
|
||||
};
|
||||
|
||||
vcc4v0_sys: vcc4v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc4v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <4000000>;
|
||||
regulator-max-microvolt = <4000000>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
@ -103,19 +91,28 @@
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vbus_typec0: vbus-typec0 {
|
||||
@ -125,9 +122,9 @@
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&typec5v_pwren_h>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -195,7 +192,7 @@
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
@ -212,7 +209,7 @@
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
@ -235,7 +232,7 @@
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
@ -304,13 +301,12 @@
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
@ -353,31 +349,37 @@
|
||||
};
|
||||
};
|
||||
|
||||
&i2s5_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* phy1 - right ethernet port */
|
||||
&pcie2x1l0 {
|
||||
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* phy2 - WiFi */
|
||||
&pcie2x1l1 {
|
||||
reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
|
||||
pcie@0,0 {
|
||||
reg = <0x00300000 0 0 0 0>;
|
||||
reg = <0x300000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@30,0 {
|
||||
wifi: wifi@0,0 {
|
||||
compatible = "pci14e4,449d";
|
||||
reg = <0x310000 0 0 0 0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-names = "host-wake";
|
||||
clocks = <&hym8563>;
|
||||
clock-names = "lpo";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* phy0 - left ethernet port */
|
||||
&pcie2x1l2 {
|
||||
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
@ -408,25 +410,19 @@
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
led_green_pin: led-green-pin {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
led_red_pin: led-red-pin {
|
||||
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie30 {
|
||||
pcie30_pwren_h: pcie30-pwren-h {
|
||||
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
leds {
|
||||
led_rgb_g: led-rgb-g {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
led_rgb_r: led-rgb-r {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -462,13 +458,10 @@
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
mmc-hs200-1_8v;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -477,9 +470,10 @@
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
@ -501,30 +495,30 @@
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc4v0_sys>;
|
||||
vcc2-supply = <&vcc4v0_sys>;
|
||||
vcc3-supply = <&vcc4v0_sys>;
|
||||
vcc4-supply = <&vcc4v0_sys>;
|
||||
vcc5-supply = <&vcc4v0_sys>;
|
||||
vcc6-supply = <&vcc4v0_sys>;
|
||||
vcc7-supply = <&vcc4v0_sys>;
|
||||
vcc8-supply = <&vcc4v0_sys>;
|
||||
vcc9-supply = <&vcc4v0_sys>;
|
||||
vcc10-supply = <&vcc4v0_sys>;
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc4v0_sys>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc4v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
@ -853,8 +847,6 @@
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&hym8563>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
@ -14,7 +14,7 @@
|
||||
model = "FriendlyElec NanoPC-T6";
|
||||
compatible = "friendlyarm,nanopc-t6", "rockchip,rk3588";
|
||||
|
||||
vdd_4g_3v3: vdd-4g-3v3-regulator {
|
||||
vdd_4g_3v3: regulator-vdd-4g-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
@ -20,10 +20,20 @@
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
led-boot = &sys_led;
|
||||
led-failsafe = &sys_led;
|
||||
led-running = &sys_led;
|
||||
led-upgrade = &sys_led;
|
||||
};
|
||||
|
||||
adc-keys-0 {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-maskrom {
|
||||
label = "Mask Rom";
|
||||
linux,code = <KEY_SETUP>;
|
||||
press-threshold-microvolt = <2000>;
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
@ -43,7 +53,7 @@
|
||||
sys_led: led-0 {
|
||||
gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
label = "system-led";
|
||||
default-state = "on";
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sys_led_pin>;
|
||||
};
|
||||
@ -65,8 +75,7 @@
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
|
||||
simple-audio-card,hp-pin-name = "Headphones";
|
||||
simple-audio-card,hp-det-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
|
||||
|
||||
simple-audio-card,widgets =
|
||||
"Headphone", "Headphones",
|
||||
@ -85,7 +94,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
vcc12v_dcin: regulator-vcc12v-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
@ -95,7 +104,7 @@
|
||||
};
|
||||
|
||||
/* vcc5v0_sys powers peripherals */
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
@ -106,7 +115,7 @@
|
||||
};
|
||||
|
||||
/* vcc4v0_sys powers the RK806, RK860's */
|
||||
vcc4v0_sys: vcc4v0-sys-regulator {
|
||||
vcc4v0_sys: regulator-vcc4v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc4v0_sys";
|
||||
regulator-always-on;
|
||||
@ -116,7 +125,7 @@
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc-1v1-nldo-s3";
|
||||
regulator-always-on;
|
||||
@ -126,7 +135,7 @@
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
};
|
||||
|
||||
vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
|
||||
vcc_3v3_pcie20: regulator-vcc3v3-pcie20 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_3v3_pcie20";
|
||||
regulator-always-on;
|
||||
@ -136,7 +145,7 @@
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vbus5v0_typec: vbus5v0-typec-regulator {
|
||||
vbus5v0_typec: regulator-vbus5v0-typec {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
@ -150,7 +159,21 @@
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
|
||||
vbus5v0_usb: regulator-vbus5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb5v_pwren>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vbus5v0_usb";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
@ -162,7 +185,7 @@
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
||||
vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
@ -174,9 +197,8 @@
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sd_s0: vcc3v3-sd-s0-regulator {
|
||||
vcc3v3_sd_s0: regulator-vcc3v3-sd-s0 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-low;
|
||||
gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
@ -492,6 +514,10 @@
|
||||
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usb5v_pwren: usb5v_pwren {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usbc0_int: usbc0-int {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
@ -650,7 +676,6 @@
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-init-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
|
||||
@ -891,6 +916,14 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
status = "okay";
|
||||
};
|
||||
@ -930,6 +963,11 @@
|
||||
};
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
phy-supply = <&vbus5v0_usb>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
@ -950,6 +988,11 @@
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -19,12 +19,6 @@
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
serial2 = &uart2;
|
||||
|
||||
led-boot = &status_led;
|
||||
led-failsafe = &status_led;
|
||||
led-running = &status_led;
|
||||
led-upgrade = &status_led;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@ -83,7 +77,7 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blue_led_pin>;
|
||||
|
||||
status_led: led {
|
||||
led_blue_gpio: led {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <1>;
|
||||
@ -102,7 +96,7 @@
|
||||
pwm-leds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
led {
|
||||
led_green_pwm: led {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <2>;
|
||||
@ -119,7 +113,7 @@
|
||||
simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,hp-det-gpio = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
|
||||
simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
|
||||
simple-audio-card,bitclock-master = <&daicpu>;
|
||||
simple-audio-card,frame-master = <&daicpu>;
|
||||
/*TODO: SARADC_IN3 is used as MIC detection / key input */
|
||||
@ -164,7 +158,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
||||
vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
@ -175,17 +169,17 @@
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie_eth: vcc3v3-pcie-eth-regulator {
|
||||
vcc3v3_pcie_eth: regulator-vcc3v3-pcie-eth {
|
||||
compatible = "regulator-fixed";
|
||||
gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
|
||||
regulator-name = "vcc3v3_pcie_eth";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <50000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc3v3_wf: vcc3v3-wf-regulator {
|
||||
vcc3v3_wf: regulator-vcc3v3-wf {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
@ -196,7 +190,7 @@
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
@ -205,7 +199,7 @@
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_usb20: vcc5v0-usb20-regulator {
|
||||
vcc5v0_usb20: regulator-vcc5v0-usb20 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
@ -216,6 +210,18 @@
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vbus5v0_typec: regulator-vbus-typec {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&typec5v_pwren>;
|
||||
regulator-name = "vbus5v0_typec";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
@ -262,6 +268,11 @@
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
@ -306,6 +317,57 @@
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
usbc0: usb-typec@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usbc0_int>;
|
||||
vbus-supply = <&vbus5v0_typec>;
|
||||
status = "okay";
|
||||
|
||||
usb_con: connector {
|
||||
compatible = "usb-c-connector";
|
||||
data-role = "dual";
|
||||
label = "USB-C";
|
||||
power-role = "dual";
|
||||
op-sink-microwatt = <10>;
|
||||
source-pdos = <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 10, PDO_FIXED_USB_COMM)>;
|
||||
try-power-role = "source";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
usbc0_hs: endpoint {
|
||||
remote-endpoint = <&usb_host0_xhci_drd_sw>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
usbc0_ss: endpoint {
|
||||
remote-endpoint = <&usbdp_phy0_typec_ss>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
|
||||
usbc0_sbu: endpoint {
|
||||
remote-endpoint = <&usbdp_phy0_typec_sbu>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
@ -324,14 +386,13 @@
|
||||
|
||||
/* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */
|
||||
es8388: audio-codec@11 {
|
||||
compatible = "everest,es8388";
|
||||
compatible = "everest,es8388", "everest,es8328";
|
||||
reg = <0x11>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
clock-names = "mclk";
|
||||
AVDD-supply = <&vcc_1v8_s0>;
|
||||
AVDD-supply = <&vcc_3v3_s0>;
|
||||
DVDD-supply = <&vcc_1v8_s0>;
|
||||
HPVDD-supply = <&vcc_3v3_s0>;
|
||||
PVDD-supply = <&vcc_3v3_s0>;
|
||||
PVDD-supply = <&vcc_1v8_s0>;
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
#sound-dai-cells = <0>;
|
||||
@ -357,6 +418,14 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s5_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s6_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* phy1 - M.KEY socket */
|
||||
&pcie2x1l0 {
|
||||
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
@ -418,6 +487,16 @@
|
||||
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb-typec {
|
||||
usbc0_int: usbc0-int {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
typec5v_pwren: typec5v-pwren {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
@ -450,6 +529,7 @@
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
no-sdio;
|
||||
@ -491,6 +571,7 @@
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
spi-max-frequency = <1000000>;
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
@ -512,7 +593,7 @@
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
@ -807,6 +888,23 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
phy-supply = <&vcc5v0_sys>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -835,6 +933,14 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
@ -843,6 +949,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
@ -850,3 +960,40 @@
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
mode-switch;
|
||||
orientation-switch;
|
||||
sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
usbdp_phy0_typec_ss: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&usbc0_ss>;
|
||||
};
|
||||
|
||||
usbdp_phy0_typec_sbu: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&usbc0_sbu>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
usb-role-switch;
|
||||
|
||||
port {
|
||||
usb_host0_xhci_drd_sw: endpoint {
|
||||
remote-endpoint = <&usbc0_hs>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -14,13 +14,8 @@
|
||||
compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdmmc;
|
||||
serial2 = &uart2;
|
||||
|
||||
led-boot = &status_led;
|
||||
led-failsafe = &status_led;
|
||||
led-running = &status_led;
|
||||
led-upgrade = &status_led;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@ -41,18 +36,19 @@
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 =<&leds_gpio>;
|
||||
pwm-leds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
status_led: led-1 {
|
||||
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
label = "status_led";
|
||||
led {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
linux,default-trigger = "heartbeat";
|
||||
max-brightness = <255>;
|
||||
pwms = <&pwm0 0 25000 0>;
|
||||
};
|
||||
};
|
||||
|
||||
vbus_typec: vbus-typec-regulator {
|
||||
vbus_typec: regulator-vbus-typec {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
@ -64,7 +60,7 @@
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
@ -73,9 +69,8 @@
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
|
||||
vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-low;
|
||||
gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
|
||||
regulator-name = "vcc_3v3_sd_s0";
|
||||
regulator-boot-on;
|
||||
@ -84,7 +79,7 @@
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie20: vcc3v3-pcie20-regulator {
|
||||
vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
@ -285,6 +280,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&i2s5_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
@ -302,12 +301,6 @@
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
gpio-func {
|
||||
leds_gpio: leds-gpio {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
@ -325,6 +318,12 @@
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
pinctrl-0 = <&pwm0m2_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&avcc_1v8_s0>;
|
||||
status = "okay";
|
||||
@ -396,7 +395,7 @@
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user