298977887/lede
1
0
Fork 0
mirror of https://github.com/coolsnowwolf/lede.git synced 2025-04-16 04:13:31 +00:00
Code Issues Packages Projects Releases Wiki Activity

at91: switch to 4.14 (#3040)

Browse Source
This commit is contained in:
AmadeusGhost 2020-02-11 17:26:30 +08:00 committed by GitHub
parent 20a4977fa4
commit cd3bbb525f
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
29 changed files with 350 additions and 1303 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
target/linux/at91/Makefile
View File

@ -8,12 +8,13 @@ include $(TOPDIR)/rules.mk
ARCH:=arm
BOARD:=at91
MAINTAINER:=Claudio Mignanti <c.mignanti@gmail.com>
MAINTAINER:=Claudio Mignanti <c.mignanti@gmail.com> \
Sandeep Sheriker <sandeep.sheriker@gmail.com>
BOARDNAME:=Microchip (Atmel AT91)
FEATURES:=ext4 squashfs targz usb usbgadget ubifs
SUBTARGETS:=sama5d2 sama5d3 sama5d4 legacy
SUBTARGETS:=sama5 sam9x
KERNEL_PATCHVER:=4.9
KERNEL_PATCHVER:=4.14
include $(INCLUDE_DIR)/target.mk

156
target/linux/at91/config-4.9 → target/linux/at91/config-4.14
View File

@ -1,15 +1,23 @@
CONFIG_ALIGNMENT_TRAP=y
CONFIG_ARCH_AT91=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
@ -35,44 +43,49 @@ CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_AT91_ADC=y
CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_AT91_SOC_ID=y
CONFIG_ATMEL_AIC5_IRQ=y
CONFIG_ATMEL_EBI=y
CONFIG_ATMEL_PIT=y
CONFIG_ATMEL_PM=y
CONFIG_ATMEL_SDRAMC=y
CONFIG_ATMEL_SSC=y
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
CONFIG_ATMEL_TCLIB=y
CONFIG_AT_HDMAC=y
# CONFIG_AT_XDMAC is not set
CONFIG_AT_XDMAC=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BLK_CGROUP is not set
CONFIG_BATTERY_ACT8945A=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_SD=y
# CONFIG_BPF_SYSCALL is not set
# CONFIG_BRIDGE is not set
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_CACHE_L2X0=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_PROBE=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMA=y
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=7
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_SIZE_MBYTES=16
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_AT91=y
CONFIG_CONFIGFS_FS=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_COREDUMP=y
# CONFIG_CPUSETS is not set
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
@ -86,14 +99,20 @@ CONFIG_CPU_HAS_ASID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_PM=y
CONFIG_CPU_SPECTRE=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRASH_CORE=y
CONFIG_CRASH_DUMP=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_CCM=y
@ -123,14 +142,13 @@ CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_UART_8250 is not set
CONFIG_DEBUG_USER=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_DEFAULT_NOOP=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DMADEVICES=y
# CONFIG_DMA_CMA is not set
CONFIG_DMA_CMA=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DMA_SHARED_BUFFER=y
@ -139,13 +157,14 @@ CONFIG_DRM=y
CONFIG_DRM_ATMEL_HLCDC=y
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_PANEL=y
CONFIG_DRM_PANEL_BRIDGE=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DST_CACHE=y
CONFIG_DTC=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_EDAC_ATOMIC_SCRUB=y
@ -153,9 +172,7 @@ CONFIG_EDAC_SUPPORT=y
CONFIG_EEPROM_AT24=y
CONFIG_ELF_CORE=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_EXPORTFS=y
CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_FAT_FS=y
CONFIG_FB=y
# CONFIG_FB_ATMEL is not set
@ -164,22 +181,21 @@ CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FHANDLE=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FORCE_MAX_ZONEORDER=15
CONFIG_FRAME_VECTOR=y
CONFIG_FREEZER=y
CONFIG_FS_MBCACHE=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IO=y
@ -192,10 +208,11 @@ CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GLOB=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_SYSFS=y
CONFIG_GRACE_PERIOD=y
# CONFIG_GRO_CELLS is not set
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y
CONFIG_HARDIRQS_SW_RESEND=y
@ -211,13 +228,13 @@ CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_AT91_AUDIO_PLL=y
CONFIG_HAVE_AT91_GENERATED_CLK=y
CONFIG_HAVE_AT91_H32MX=y
CONFIG_HAVE_AT91_SMD=y
CONFIG_HAVE_AT91_USB_CLK=y
CONFIG_HAVE_AT91_UTMI=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
@ -227,6 +244,8 @@ CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FB_ATMEL=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
@ -255,7 +274,6 @@ CONFIG_HW_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_ATMEL=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_AT91=y
@ -277,10 +295,6 @@ CONFIG_INPUT_LEDS=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_RARP is not set
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
@ -294,31 +308,33 @@ CONFIG_KEXEC=y
CONFIG_KEXEC_CORE=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_QT1070=y
# CONFIG_LCD_PLATFORM is not set
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=4
CONFIG_LIBFDT=y
CONFIG_LOCALVERSION_AUTO=y
CONFIG_LOCKD=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MACB=y
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_USB_SUPPORT=y
# CONFIG_MEMCG is not set
CONFIG_MEMORY=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_ATMEL_SMC=y
CONFIG_MFD_CORE=y
CONFIG_MFD_SYSCON=y
CONFIG_MICREL_PHY=y
@ -328,16 +344,20 @@ CONFIG_MIGRATION=y
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=y
CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_BLOCK is not set
@ -354,6 +374,8 @@ CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_NO_BOOTMEM=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NVMEM=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
@ -369,9 +391,6 @@ CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_PARTITION_ADVANCED is not set
# CONFIG_PCI_DOMAINS_GENERIC is not set
# CONFIG_PCI_SYSCALL is not set
@ -396,32 +415,34 @@ CONFIG_PM_SLEEP_DEBUG=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AT91_POWEROFF=y
CONFIG_POWER_RESET_AT91_RESET=y
# CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC is not set
CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
CONFIG_POWER_SUPPLY=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PRINTK_TIME=y
CONFIG_PROC_VMCORE=y
CONFIG_PWM=y
CONFIG_PWM_ATMEL=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_ATMEL_TCB=y
CONFIG_PWM_SYSFS=y
CONFIG_RATIONAL=y
# CONFIG_RCU_EXPERT is not set
# CONFIG_RCU_NEED_SEGCBLIST is not set
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_SPI=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_ROOT_NFS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
# CONFIG_RTC_DRV_AT91SAM9 is not set
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SAMA5D4_WATCHDOG is not set
CONFIG_SAMA5D4_WATCHDOG=y
# CONFIG_SCHED_INFO is not set
CONFIG_SCSI=y
# CONFIG_SCSI_LOWLEVEL is not set
@ -432,19 +453,18 @@ CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SG_POOL=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_SND=y
CONFIG_SND_ARM=y
# CONFIG_SND_AT73C213 is not set
# CONFIG_SND_AT91_SOC_SAM9G20_WM8731 is not set
# CONFIG_SND_AT91_SOC_SAM9X5_WM8731 is not set
CONFIG_SND_ATMEL_SOC=y
# CONFIG_SND_ATMEL_SOC_CLASSD is not set
CONFIG_SND_ATMEL_SOC_CLASSD=y
CONFIG_SND_ATMEL_SOC_DMA=y
# CONFIG_SND_ATMEL_SOC_PDMIC is not set
CONFIG_SND_ATMEL_SOC_SSC=y
CONFIG_SND_ATMEL_SOC_SSC_DMA=y
# CONFIG_SND_ATMEL_SOC_TSE850_PCM5142 is not set
CONFIG_SND_ATMEL_SOC_WM8904=y
# CONFIG_SND_COMPRESS_OFFLOAD is not set
CONFIG_SND_DMAENGINE_PCM=y
@ -460,76 +480,61 @@ CONFIG_SND_SPI=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_TIMER=y
CONFIG_SOC_BUS=y
# CONFIG_SOC_SAMA5D2 is not set
# CONFIG_SOC_SAMA5D3 is not set
# CONFIG_SOC_SAMA5D4 is not set
CONFIG_SOC_SAMA5=y
CONFIG_SOC_SAMA5D2=y
CONFIG_SOC_SAMA5D3=y
CONFIG_SOC_SAMA5D4=y
CONFIG_SOC_SAM_V7=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_ATMEL_QUADSPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y
# CONFIG_SQUASHFS is not set
CONFIG_SRAM=y
CONFIG_SRAM_EXEC=y
CONFIG_SRCU=y
# CONFIG_STAGING is not set
# CONFIG_STANDALONE is not set
CONFIG_SUNRPC=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SWAP is not set
CONFIG_SWIOTLB=y
CONFIG_SWPHY=y
# CONFIG_SWP_EMULATE is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYNC_FILE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_THUMB2_KERNEL is not set
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_TMPFS_XATTR is not set
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TINY_SRCU=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_UACCESS_WITH_MEMCPY=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_USB=y
CONFIG_USB_ACM=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
# CONFIG_USB_AT91 is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ATMEL_USBA is not set
CONFIG_USB_COMMON=y
CONFIG_USB_CONFIGFS_ACM=y
# CONFIG_USB_CONFIGFS_ECM is not set
# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
# CONFIG_USB_CONFIGFS_EEM is not set
# CONFIG_USB_CONFIGFS_F_FS is not set
# CONFIG_USB_CONFIGFS_F_HID is not set
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
# CONFIG_USB_CONFIGFS_F_MIDI is not set
# CONFIG_USB_CONFIGFS_F_PRINTER is not set
# CONFIG_USB_CONFIGFS_F_UAC1 is not set
# CONFIG_USB_CONFIGFS_F_UAC2 is not set
# CONFIG_USB_CONFIGFS_F_UVC is not set
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
# CONFIG_USB_CONFIGFS_NCM is not set
# CONFIG_USB_CONFIGFS_OBEX is not set
# CONFIG_USB_CONFIGFS_RNDIS is not set
# CONFIG_USB_CONFIGFS_SERIAL is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_AT91=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ETH is not set
CONFIG_USB_GADGET=y
CONFIG_USB_HID=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_AT91=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_PWC is not set
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
@ -544,17 +549,12 @@ CONFIG_VFAT_FS=y
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_VIDEOMODE_HELPERS=y
# CONFIG_VIDEO_ATMEL_ISI is not set
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VLAN_8021Q is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_WATCHDOG_CORE=y
# CONFIG_WLAN is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0

2
target/linux/at91/files/arch/arm/boot/dts/wb45n.dts
View File

@ -206,7 +206,7 @@
atheros,board-id = "SD32";
};
gpio_keys {
keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;

2
target/linux/at91/files/arch/arm/boot/dts/wb50n.dts
View File

@ -73,7 +73,7 @@
};
};
gpio_keys {
keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;

47
target/linux/at91/image/Makefile
View File

@ -13,17 +13,11 @@ define Build/at91-install-zImage
$(CP) $(KDIR)/zImage $@
endef
ifeq ($(SUBTARGET),legacy)
include ./legacy.mk
ifeq ($(SUBTARGET),sam9x)
include ./sam9x.mk
endif
ifeq ($(SUBTARGET),sama5d2)
include ./sama5d2.mk
endif
ifeq ($(SUBTARGET),sama5d3)
include ./sama5d3.mk
endif
ifeq ($(SUBTARGET),sama5d4)
include ./sama5d4.mk
ifeq ($(SUBTARGET),sama5)
include ./sama5.mk
endif
AT91_SD_BOOT_PARTSIZE:=64
@ -46,37 +40,6 @@ define Device/dtb
KERNEL := kernel-bin | lzma | uImage lzma
endef
define Build/at91-sdcard
$(if $(findstring ext4,$@), \
rm -f $@.boot
mkfs.fat -C $@.boot $(FAT32_BLOCKS)
mcopy -i $@.boot $(KDIR)/zImage ::zImage
$(foreach dts,$(DEVICE_DTS), \
mcopy -i $@.boot $(DTS_DIR)/$(dts).dtb \
::$(dts).dtb)
mcopy -i $@.boot \
$(BIN_DIR)/u-boot-$(DEVICE_NAME:at91-%=%)_mmc/u-boot.bin \
::u-boot.bin
mcopy -i $@.boot \
$(BIN_DIR)/at91bootstrap-$(DEVICE_NAME:at91-%=%)sd*/at91bootstrap.bin \
::BOOT.bin
./gen_at91_sdcard_img.sh \
$@.img \
$@.boot \
$(KDIR)/root.ext4 \
$(AT91_SD_BOOT_PARTSIZE) \
$(CONFIG_TARGET_ROOTFS_PARTSIZE)
gzip -nc9 $@.img > $@
rm -f $@.img $@.boot )
endef
define Device/evaluation-sdimage
IMAGES += sdcard.img.gz
IMAGE/sdcard.img.gz := at91-sdcard
@ -100,6 +63,8 @@ define Device/evaluation-dtb
$(Device/evaluation-zImage)
IMAGES += dtb
IMAGE/dtb := install-dtb
KERNEL_SUFFIX := -fit-zImage.itb
KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
endef
define Device/evaluation-fit

4
target/linux/at91/image/gen_at91_sdcard_img.sh
View File

@ -1,4 +1,4 @@
#!/usr/bin/env bash
#!/bin/sh
#
# Copyright (C) 2017 OpenWrt.org
@ -22,7 +22,7 @@ ROOTFSSIZE="$5"
head=4
sect=2048
set `ptgen -o $OUTPUT -h $head -s $sect -l 1024 -t c -p ${BOOTFSSIZE}M -t 83 -p ${ROOTFSSIZE}M`
set $(ptgen -o $OUTPUT -h $head -s $sect -l 1024 -t c -p ${BOOTFSSIZE}M -t 83 -p ${ROOTFSSIZE}M)
BOOTOFFSET="$(($1 / 512))"
BOOTSIZE="$(($2 / 512))"

103
target/linux/at91/image/legacy.mk → target/linux/at91/image/sam9x.mk
View File

@ -5,63 +5,114 @@ define Device/default-nand
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 126KiB -c 2048
endef
define Build/at91-sdcard
$(if $(findstring ext4,$@), \
rm -f $@.boot
mkfs.fat -C $@.boot $(FAT32_BLOCKS)
mcopy -i $@.boot \
$(KDIR)/$(DEVICE_NAME)-fit-zImage.itb \
::$(DEVICE_NAME)-fit.itb
mcopy -i $@.boot \
$(BIN_DIR)/u-boot-at91sam9x5ek_mmc/u-boot.bin \
::u-boot.bin
mcopy -i $@.boot \
$(BIN_DIR)/at91bootstrap-at91sam9x5eksd_uboot/at91bootstrap.bin \
::BOOT.bin
$(CP) uboot-env.txt $@-uboot-env.txt
sed -i '2d;3d' $@-uboot-env.txt
sed -i '2i board='"$(DEVICE_NAME)"'' $@-uboot-env.txt
sed -i '3i board_name='"$(DEVICE_NAME)"'' $@-uboot-env.txt
mkenvimage -s 0x4000 -o $@-uboot.env $@-uboot-env.txt
mcopy -i $@.boot $@-uboot.env ::uboot.env
./gen_at91_sdcard_img.sh \
$@.img \
$@.boot \
$(KDIR)/root.ext4 \
$(AT91_SD_BOOT_PARTSIZE) \
$(CONFIG_TARGET_ROOTFS_PARTSIZE)
gzip -nc9 $@.img > $@
rm -f $@.img $@.boot $@-uboot.env $@-uboot-env.txt)
endef
define Device/at91sam9263ek
$(Device/evaluation-dtb)
DEVICE_TITLE := Atmel AT91SAM9263-EK
DEVICE_VENDOR := Atmel
DEVICE_MODEL := AT91SAM9263-EK
endef
TARGET_DEVICES += at91sam9263ek
define Device/at91sam9g15ek
$(Device/evaluation)
DEVICE_TITLE := Atmel AT91SAM9G15-EK
DEVICE_VENDOR := Atmel
DEVICE_MODEL := AT91SAM9G15-EK
endef
TARGET_DEVICES += at91sam9g15ek
define Device/at91sam9g20ek
$(Device/evaluation-dtb)
DEVICE_TITLE := Atmel AT91SAM9G20-EK
DEVICE_VENDOR := Atmel
DEVICE_MODEL := AT91SAM9G20-EK
endef
TARGET_DEVICES += at91sam9g20ek
define Device/at91sam9g20ek_2mmc
$(Device/evaluation-dtb)
DEVICE_TITLE := Atmel AT91SAM9G20-EK 2MMC
DEVICE_VENDOR := Atmel
DEVICE_MODEL := AT91SAM9G20-EK
DEVICE_VARIANT := 2MMC
endef
TARGET_DEVICES += at91sam9g20ek_2mmc
define Device/at91sam9g25ek
$(Device/evaluation)
DEVICE_TITLE := Atmel AT91SAM9G25-EK
DEVICE_VENDOR := Atmel
DEVICE_MODEL := AT91SAM9G25-EK
endef
TARGET_DEVICES += at91sam9g25ek
define Device/at91sam9g35ek
$(Device/evaluation)
DEVICE_TITLE := Atmel AT91SAM9G35-EK
DEVICE_VENDOR := Atmel
DEVICE_MODEL := AT91SAM9G35-EK
endef
TARGET_DEVICES += at91sam9g35ek
define Device/at91sam9m10g45ek
$(Device/evaluation)
DEVICE_TITLE := Atmel AT91SAM9M10G45-EK
DEVICE_VENDOR := Atmel
DEVICE_MODEL := AT91SAM9M10G45-EK
endef
TARGET_DEVICES += at91sam9m10g45ek
define Device/at91sam9x25ek
$(Device/evaluation)
DEVICE_TITLE := Atmel AT91SAM9X25-EK
$(Device/evaluation-dtb)
DEVICE_VENDOR := Atmel
DEVICE_MODEL := AT91SAM9X25-EK
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += at91sam9x25ek
define Device/at91sam9x35ek
$(Device/evaluation)
DEVICE_TITLE := Atmel AT91SAM9X35-EK
$(Device/evaluation-dtb)
DEVICE_VENDOR := Atmel
DEVICE_MODEL := AT91SAM9X35-EK
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += at91sam9x35ek
define Device/lmu5000
$(Device/production)
DEVICE_TITLE := CalAmp LMU5000
DEVICE_VENDOR := CalAmp
DEVICE_MODEL := LMU5000
DEVICE_PACKAGES := kmod-rtc-pcf2123 kmod-usb-acm kmod-usb-serial \
kmod-usb-serial-option kmod-usb-serial-sierrawireless kmod-gpio-mcp23s08
endef
@ -69,57 +120,66 @@ TARGET_DEVICES += lmu5000
define Device/tny_a9260
$(Device/production-dtb)
DEVICE_TITLE := Calao TNYA9260
DEVICE_VENDOR := Calao
DEVICE_MODEL := TNYA9260
endef
TARGET_DEVICES += tny_a9260
define Device/tny_a9263
$(Device/production-dtb)
DEVICE_TITLE := Calao TNYA9263
DEVICE_VENDOR := Calao
DEVICE_MODEL := TNYA9263
endef
TARGET_DEVICES += tny_a9263
define Device/tny_a9g20
$(Device/production-dtb)
DEVICE_TITLE := Calao TNYA9G20
DEVICE_VENDOR := Calao
DEVICE_MODEL := TNYA9G20
endef
TARGET_DEVICES += tny_a9g20
define Device/usb_a9260
$(Device/production-dtb)
DEVICE_TITLE := Calao USBA9260
DEVICE_VENDOR := Calao
DEVICE_MODEL := USBA9260
endef
TARGET_DEVICES += usb_a9260
define Device/usb_a9263
$(Device/production-dtb)
DEVICE_TITLE := Calao USBA9263
DEVICE_VENDOR := Calao
DEVICE_MODEL := USBA9263
endef
TARGET_DEVICES += usb_a9263
define Device/usb_a9g20
$(Device/production-dtb)
DEVICE_TITLE := Calao USBA9G20
DEVICE_VENDOR := Calao
DEVICE_MODEL := USBA9G20
endef
TARGET_DEVICES += usb_a9g20
define Device/ethernut5
$(Device/evaluation)
DEVICE_TITLE := Ethernut 5
DEVICE_VENDOR := egnite
DEVICE_MODEL := Ethernut 5
UBINIZE_OPTS := -E 5
endef
TARGET_DEVICES += ethernut5
define Device/at91-q5xr5
$(Device/production-dtb)
DEVICE_TITLE := Exegin Q5XR5
DEVICE_VENDOR := Exegin
DEVICE_MODEL := Q5XR5
KERNEL_SIZE := 2048k
endef
#TARGET_DEVICES += at91-q5xr5
define Device/wb45n
$(Device/evaluation-fit)
DEVICE_TITLE := Laird WB45N
DEVICE_VENDOR := Laird
DEVICE_MODEL := WB45N
DEVICE_PACKAGES := \
kmod-mmc-at91 kmod-ath6kl-sdio ath6k-firmware \
kmod-usb-storage kmod-fs-vfat kmod-fs-msdos \
@ -130,4 +190,3 @@ define Device/wb45n
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB -c 955
endef
TARGET_DEVICES += wb45n

123
target/linux/at91/image/sama5.mk Normal file
View File

@ -0,0 +1,123 @@
define Device/default-nand
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 2048
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB -c 2048
endef
define Build/at91-sdcard
$(if $(findstring ext4,$@), \
rm -f $@.boot
mkfs.fat -C $@.boot $(FAT32_BLOCKS)
mcopy -i $@.boot \
$(KDIR)/$(DEVICE_NAME)-fit-zImage.itb \
::$(DEVICE_NAME:at91-%=%)-fit.itb
$(if $(findstring at91-sama5d27_som1_ek,$@), \
mcopy -i $@.boot \
$(BIN_DIR)/u-boot-$(DEVICE_NAME:at91-%=%)_mmc1/u-boot.bin \
::u-boot.bin
mcopy -i $@.boot \
$(BIN_DIR)/at91bootstrap-$(DEVICE_NAME:at91-%=%)sd1_uboot/at91bootstrap.bin \
::BOOT.bin,
mcopy -i $@.boot \
$(BIN_DIR)/u-boot-$(DEVICE_NAME:at91-%=%)_mmc/u-boot.bin \
::u-boot.bin
$(if $(findstring sama5d4_xplained, $@), \
mcopy -i $@.boot \
$(BIN_DIR)/at91bootstrap-$(DEVICE_NAME:at91-%=%)sd_uboot_secure/at91bootstrap.bin \
::BOOT.bin,
mcopy -i $@.boot \
$(BIN_DIR)/at91bootstrap-$(DEVICE_NAME:at91-%=%)sd_uboot/at91bootstrap.bin \
::BOOT.bin))
$(CP) uboot-env.txt $@-uboot-env.txt
sed -i '2d;3d' $@-uboot-env.txt
sed -i '2i board='"$(DEVICE_NAME:at91-%=%)"'' $@-uboot-env.txt
sed -i '3i board_name='"$(DEVICE_NAME:at91-%=%)"'' $@-uboot-env.txt
mkenvimage -s 0x4000 -o $@-uboot.env $@-uboot-env.txt
mcopy -i $@.boot $@-uboot.env ::uboot.env
./gen_at91_sdcard_img.sh \
$@.img \
$@.boot \
$(KDIR)/root.ext4 \
$(AT91_SD_BOOT_PARTSIZE) \
$(CONFIG_TARGET_ROOTFS_PARTSIZE)
gzip -nc9 $@.img > $@
rm -f $@.img $@.boot $@-uboot.env $@-uboot-env.txt)
endef
define Device/at91-sama5d2_xplained
$(Device/evaluation-dtb)
DEVICE_VENDOR := Microchip
DEVICE_MODEL := SAMA5D2 Xplained
KERNEL_SIZE := 6144k
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += at91-sama5d2_xplained
define Device/at91-sama5d27_som1_ek
$(Device/evaluation-dtb)
DEVICE_VENDOR := Microchip
DEVICE_MODEL := SAMA5D27 SOM1 Ek
KERNEL_SIZE := 6144k
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += at91-sama5d27_som1_ek
define Device/at91-sama5d2_ptc_ek
$(Device/evaluation-dtb)
DEVICE_VENDOR := Microchip
DEVICE_MODEL := SAMA5D2 PTC Ek
KERNEL_SIZE := 6144k
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += at91-sama5d2_ptc_ek
define Device/at91-sama5d3_xplained
$(Device/evaluation-dtb)
DEVICE_VENDOR := Microchip
DEVICE_MODEL := SAMA5D3 Xplained
KERNEL_SIZE := 6144k
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += at91-sama5d3_xplained
ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"")
ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI)),"")
define Device/wb50n
$(Device/evaluation-fit)
DEVICE_VENDOR := Laird
DEVICE_MODEL := WB50N
DEVICE_PACKAGES := \
kmod-mmc-at91 kmod-ath6kl-sdio ath6k-firmware \
kmod-usb-storage kmod-fs-vfat kmod-fs-msdos \
kmod-leds-gpio
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 2048
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB -c 955
endef
TARGET_DEVICES += wb50n
endif
endif
define Device/at91-sama5d4_xplained
$(Device/evaluation-dtb)
DEVICE_VENDOR := Microchip
DEVICE_MODEL := SAMA5D4 Xplained
KERNEL_SIZE := 6144k
BLOCKSIZE := 256k
PAGESIZE := 4096
SUBPAGESIZE := 2048
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 248KiB -c 2082
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += at91-sama5d4_xplained

31
target/linux/at91/image/sama5d2.mk
View File

@ -1,31 +0,0 @@
define Device/default-nand
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 2048
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB -c 2048
endef
define Device/at91-sama5d2_xplained
$(Device/evaluation-dtb)
DEVICE_TITLE := Microchip(Atmel AT91) SAMA5D2 Xplained
KERNEL_SIZE := 6144k
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += at91-sama5d2_xplained
define Device/at91-sama5d27_som1_ek
$(Device/evaluation-dtb)
DEVICE_TITLE := Microchip(Atmel AT91) SAMA5D27 SOM1 Ek
KERNEL_SIZE := 6144k
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += at91-sama5d27_som1_ek
define Device/at91-sama5d2_ptc_ek
$(Device/evaluation-dtb)
DEVICE_TITLE := Microchip(Atmel AT91) SAMA5D2 PTC Ek
KERNEL_SIZE := 6144k
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += at91-sama5d2_ptc_ek

33
target/linux/at91/image/sama5d3.mk
View File

@ -1,33 +0,0 @@
define Device/default-nand
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 2048
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB -c 2048
endef
define Device/at91-sama5d3_xplained
$(Device/evaluation-dtb)
DEVICE_TITLE := Microchip(Atmel AT91) SAMA5D3 Xplained
KERNEL_SIZE := 6144k
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += at91-sama5d3_xplained
ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"")
ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI)),"")
define Device/wb50n
$(Device/evaluation-fit)
DEVICE_TITLE := Laird WB50N
DEVICE_PACKAGES := \
kmod-mmc-at91 kmod-ath6kl-sdio ath6k-firmware \
kmod-usb-storage kmod-fs-vfat kmod-fs-msdos \
kmod-leds-gpio
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 2048
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB -c 955
endef
TARGET_DEVICES += wb50n
endif
endif

19
target/linux/at91/image/sama5d4.mk
View File

@ -1,19 +0,0 @@
define Device/default-nand
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 2048
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB -c 2048
endef
define Device/at91-sama5d4_xplained
$(Device/evaluation-dtb)
DEVICE_TITLE := Microchip(Atmel AT91) SAMA5D4 Xplained
KERNEL_SIZE := 6144k
BLOCKSIZE := 256k
PAGESIZE := 4096
SUBPAGESIZE := 2048
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 248KiB -c 2082
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += at91-sama5d4_xplained

14
target/linux/at91/image/uboot-env.txt Normal file
View File

@ -0,0 +1,14 @@
/* Do Not remove First 2 lines, Makefile will modify these lines with proper board names */
board=at91sam9x25ek
board_name=at91sam9x25ek
bootargs=console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4
bootargsd2=console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait rootfstype=ext4
bootargsxx=console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4
bootcmd=run setbootargs; run fatload_mmc; bootm 0x21000000
bootdelay=1
fatload_mmc=if test ${board_name} = sama5d2_xplained || test ${board_name} = sama5d27_som1_ek; then fatload mmc 1:1 0x21000000 ${board_name}-fit.itb; else fatload mmc 0:1 0x21000000 ${board_name}-fit.itb; fi
setbootargs=if test ${board_name} = sama5d2_xplained || test ${board_name} = sama5d27_som1_ek; then setenv bootargs ${bootargsd2}; else setenv bootargs ${bootargsxx}; fi
ethact=gmac0
stderr=serial
stdin=serial
stdout=serial

7
target/linux/at91/legacy/target.mk
View File

@ -1,7 +0,0 @@
BOARDNAME:=Legacy (ARMv5)
CPU_TYPE:=arm926ej-s
define Target/Description
Build generic firmware for legacy Atmel AT91 platforms
using the ARMv5 instruction set.
endef

2
target/linux/at91/patches-4.9/100-ARM-at91-build-dtb-for-LMU5000.patch → target/linux/at91/patches-4.14/100-ARM-at91-build-dtb-for-LMU5000.patch
View File

@ -1,6 +1,6 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -32,6 +32,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
@@ -33,6 +33,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
usb_a9g20.dtb \
usb_a9g20_lpw.dtb \
at91sam9m10g45ek.dtb \

2
target/linux/at91/patches-4.9/101-ARM-at91-build-dtb-for-q5xr5.patch → target/linux/at91/patches-4.14/101-ARM-at91-build-dtb-for-q5xr5.patch
View File

@ -1,6 +1,6 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -40,6 +40,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
@@ -41,6 +41,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91-ariettag25.dtb \
at91-cosino_mega2560.dtb \
at91-kizboxmini.dtb \

4
target/linux/at91/patches-4.9/102-ARM-at91-build-dtb-for-wb45n.patch → target/linux/at91/patches-4.14/102-ARM-at91-build-dtb-for-wb45n.patch
View File

@ -1,6 +1,6 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -45,7 +45,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
@@ -46,7 +46,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
@ -9,4 +9,4 @@
+ wb45n.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2.dtb \
at91-sama5d2_xplained.dtb \
at91-sama5d27_som1_ek.dtb \

2
target/linux/at91/patches-4.9/103-ARM-at91-build-dtb-for-wb50n.patch → target/linux/at91/patches-4.14/103-ARM-at91-build-dtb-for-wb50n.patch
View File

@ -1,6 +1,6 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -59,7 +59,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
@@ -63,7 +63,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
at91-sama5d4_ma5d4evk.dtb \
at91-sama5d4_xplained.dtb \
at91-sama5d4ek.dtb \

5
target/linux/at91/patches-4.9/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch → target/linux/at91/patches-4.14/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch
View File

@ -1,6 +1,6 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -49,6 +49,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
@@ -50,6 +50,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
wb45n.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2.dtb \
@ -10,7 +10,7 @@
at91-sama5d3_xplained.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -0,0 +1,422 @@
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
@ -316,7 +316,6 @@
+ <PIN_PA30__NWE_NANDWE>,
+ <PIN_PB2__NRD_NANDOE>;
+ bias-pull-up;
+ drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+ };
+
+ ale_cle_rdy_cs {

893
target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch
View File

@ -1,893 +0,0 @@
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -35,7 +35,12 @@ right representation of the pin.
Optional properties:
- GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable,
bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable,
-input-debounce, output-low, output-high.
+input-debounce, output-low, output-high, drive-strength.
+
+Concerning the drive-strength property, the values accepted are
+ATMEL_PIO_DRVSTR_LO, ATMEL_PIO_DRVSTR_ME, ATMEL_PIO_DRVSTR_HI. The current
+depends on VDDIOP. You can find the details in the DC Characteristics table
+from the datasheet.
Example:
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -49,6 +49,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
wb45n.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2.dtb \
+ at91-sama5d27_som1_ek.dtb \
at91-sama5d2_xplained.dtb \
at91-sama5d3_xplained.dtb \
sama5d31ek.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -0,0 +1,175 @@
+/*
+ * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
+ *
+ * Copyright (c) 2017, Microchip Technology Inc.
+ * 2017 Cristian Birsan <cristian.birsan@microchip.com>
+ * 2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+
+/ {
+ model = "Atmel SAMA5D27 SoM1";
+ compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <24000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ qspi1: spi@f0024000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi1_default>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+
+ at91bootstrap@00000000 {
+ label = "at91bootstrap";
+ reg = <0x00000000 0x00010000>;
+ };
+
+ bootloader@00010000 {
+ label = "bootloader";
+ reg = <0x00010000 0x000a0000>;
+ };
+
+ bootloaderenv@000b0000 {
+ label = "bootloader env";
+ reg = <0x000b0000 0x00010000>;
+ };
+
+ dtb@000c0000 {
+ label = "device tree";
+ reg = <0x000c0000 0x0020000>;
+ };
+
+ kernel@000e0000 {
+ label = "kernel";
+ reg = <0x000e0000 0x0400000>;
+ };
+ };
+ };
+
+ macb0: ethernet@f8008000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_default>;
+ phy-mode = "rmii";
+
+ ethernet-phy@0 {
+ reg = <0x0>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+ };
+ };
+
+ i2c0: i2c@f8028000 {
+ dmas = <0>, <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ status = "okay";
+
+ at24@50 {
+ compatible = "24c02";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
+ };
+
+ pinctrl@fc038000 {
+ pinctrl_i2c0_default: i2c0_default {
+ pinmux = <PIN_PD21__TWD0>,
+ <PIN_PD22__TWCK0>;
+ bias-disable;
+ };
+
+ pinctrl_qspi1_default: qspi1_default {
+ sck_cs {
+ pinmux = <PIN_PB5__QSPI1_SCK>,
+ <PIN_PB6__QSPI1_CS>;
+ bias-disable;
+ };
+
+ data {
+ pinmux = <PIN_PB7__QSPI1_IO0>,
+ <PIN_PB8__QSPI1_IO1>,
+ <PIN_PB9__QSPI1_IO2>,
+ <PIN_PB10__QSPI1_IO3>;
+ bias-pull-up;
+ };
+ };
+
+ pinctrl_macb0_default: macb0_default {
+ pinmux = <PIN_PD9__GTXCK>,
+ <PIN_PD10__GTXEN>,
+ <PIN_PD11__GRXDV>,
+ <PIN_PD12__GRXER>,
+ <PIN_PD13__GRX0>,
+ <PIN_PD14__GRX1>,
+ <PIN_PD15__GTX0>,
+ <PIN_PD16__GTX1>,
+ <PIN_PD17__GMDC>,
+ <PIN_PD18__GMDIO>;
+ bias-disable;
+ };
+
+ pinctrl_macb0_phy_irq: macb0_phy_irq {
+ pinmux = <PIN_PD31__GPIO>;
+ bias-disable;
+ };
+ };
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -0,0 +1,53 @@
+/*
+ * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
+ *
+ * Copyright (c) 2017, Microchip Technology Inc.
+ * 2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ * 2017 Cristian Birsan <cristian.birsan@microchip.com>
+ * 2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "at91-sama5d27_som1_ek_common.dtsi"
+
+/ {
+ model = "Atmel SAMA5D27 SOM1 EK";
+ compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+};
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek_common.dtsi
@@ -0,0 +1,619 @@
+/*
+ * at91-sama5d27_som1_ek_common.dtsi - Device Tree file for SAMA5D27-SOM1-EK board
+ *
+ * Copyright (c) 2017, Microchip Technology Inc.
+ * 2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ * 2017 Cristian Birsan <cristian.birsan@microchip.com>
+ * 2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "at91-sama5d27_som1.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+ model = "Atmel SAMA5D27 SOM1 EK";
+ compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+ aliases {
+ serial0 = &uart1; /* DBGU */
+ serial1 = &uart4; /* mikro BUS 1 */
+ serial2 = &uart2; /* mikro BUS 2 */
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ ahb {
+ usb0: gadget@00300000 {
+ atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+
+ usb1: ohci@00400000 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+ &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+ 0
+ >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
+ status = "okay";
+ };
+
+ usb2: ehci@00500000 {
+ status = "okay";
+ };
+
+ sdmmc0: sdio-host@a0000000 {
+ bus-width = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc0_default>;
+ status = "okay";
+ };
+
+ sdmmc1: sdio-host@b0000000 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc1_default>;
+ status = "okay";
+ };
+
+ apb {
+ hlcdc: hlcdc@f0000000 {
+ status = "disabled";
+
+ hlcdc-display-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb>;
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ };
+ };
+
+ pmc: pmc@f0014000 {
+ pmc_fast_restart {
+ compatible = "atmel,sama5d2-pmc-fast-startup";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ atmel,wakeup-rtc-timer;
+
+ wkpin: input@0 {
+ reg = <0>;
+ };
+
+ gmac_wol: input@10 {
+ reg = <10>;
+ atmel,wakeup-active-high;
+ };
+ };
+ };
+
+ isc: isc@f0008000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
+ status = "okay";
+ };
+
+ qspi1: spi@f0024000 {
+ status = "okay";
+ };
+
+ spi0: spi@f8000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+ status = "okay";
+ };
+
+ macb0: ethernet@f8008000 {
+ status = "okay";
+ };
+
+ uart1: serial@f8020000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "okay";
+ };
+
+ uart2: serial@f8024000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "okay";
+ };
+
+ pwm0: pwm@f802c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
+ status = "disabled"; /* Conflict with leds. */
+ };
+
+ flx1: flexcom@f8038000 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c2: i2c@600 {
+ compatible = "atmel,sama5d2-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <0>, <0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&flx1_clk>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+ atmel,fifo-size = <16>;
+ status = "okay";
+ };
+ };
+
+ shdwc@f8048010 {
+ atmel,shdwc-debouncer = <976>;
+ atmel,wakeup-rtc-timer;
+
+ input@0 {
+ reg = <0>;
+ atmel,wakeup-type = "low";
+ };
+ };
+
+ watchdog@f8048040 {
+ status = "okay";
+ };
+
+ uart3: serial@fc008000 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_default>;
+ status = "disabled"; /* Conflict with isc. */
+ };
+
+ uart4: serial@fc00c000 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+ status = "okay";
+ };
+
+ flx3: flexcom@fc014000 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+ status = "disabled";
+
+ uart7: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&flx3_clk>;
+ clock-names = "usart";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx3_default>;
+ atmel,fifo-size = <32>;
+ status = "disabled"; /* Conflict with isc. */
+ };
+
+ spi2: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&flx3_clk>;
+ clock-names = "spi_clk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx3_default>;
+ atmel,fifo-size = <16>;
+ status = "disabled"; /* Conflict with isc. */
+ };
+ };
+
+ flx4: flexcom@fc018000 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+ status = "okay";
+
+ uart6: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&flx4_clk>;
+ clock-names = "usart";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx4_default>;
+ atmel,fifo-size = <32>;
+ status = "disabled"; /* Conflict with spi3 and i2c3. */
+ };
+
+ spi3: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&flx4_clk>;
+ clock-names = "spi_clk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
+ atmel,fifo-size = <16>;
+ status = "okay";
+ };
+
+ i2c3: i2c@600 {
+ compatible = "atmel,sama5d2-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <0>, <0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&flx4_clk>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx4_default>;
+ atmel,fifo-size = <16>;
+ status = "disabled"; /* Conflict with uart6 and spi3. */
+ };
+ };
+
+ i2c1: i2c@fc028000 {
+ dmas = <0>, <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ status = "okay";
+ };
+
+ pinctrl@fc038000 {
+
+ pinctrl_lcd_base: pinctrl_lcd_base {
+ pinmux = <PIN_PC5__LCDVSYNC>,
+ <PIN_PC6__LCDHSYNC>,
+ <PIN_PC8__LCDDEN>,
+ <PIN_PC7__LCDPCK>;
+ bias-disable;
+ drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+ };
+
+ pinctrl_lcd_rgb: pinctrl_lcd_rgb {
+ pinmux = <PIN_PB11__LCDDAT0>,
+ <PIN_PB12__LCDDAT1>,
+ <PIN_PB13__LCDDAT2>,
+ <PIN_PB14__LCDDAT3>,
+ <PIN_PB15__LCDDAT4>,
+ <PIN_PB16__LCDDAT5>,
+ <PIN_PB17__LCDDAT6>,
+ <PIN_PB18__LCDDAT7>,
+ <PIN_PB19__LCDDAT8>,
+ <PIN_PB20__LCDDAT9>,
+ <PIN_PB21__LCDDAT10>,
+ <PIN_PB22__LCDDAT11>,
+ <PIN_PB23__LCDDAT12>,
+ <PIN_PB24__LCDDAT13>,
+ <PIN_PB25__LCDDAT14>,
+ <PIN_PB26__LCDDAT15>,
+ <PIN_PB27__LCDDAT16>,
+ <PIN_PB28__LCDDAT17>,
+ <PIN_PB29__LCDDAT18>,
+ <PIN_PB30__LCDDAT19>,
+ <PIN_PB31__LCDDAT20>,
+ <PIN_PC0__LCDDAT21>,
+ <PIN_PC1__LCDDAT22>,
+ <PIN_PC2__LCDDAT23>;
+ bias-disable;
+ };
+
+ pinctrl_lcd_pwm: pinctrl_lcd_pwm {
+ pinmux = <PIN_PC3__LCDPWM>;
+ bias-disable;
+ };
+
+ pinctrl_can1_default: can1_default {
+ pinmux = <PIN_PC26__CANTX1>,
+ <PIN_PC27__CANRX1>;
+ bias-disable;
+ };
+
+ pinctrl_flx3_default: flx3_default {
+ pinmux = <PIN_PC20__FLEXCOM3_IO0>,
+ <PIN_PC19__FLEXCOM3_IO1>,
+ <PIN_PC18__FLEXCOM3_IO2>,
+ <PIN_PC21__FLEXCOM3_IO3>,
+ <PIN_PC22__FLEXCOM3_IO4>;
+ bias-disable;
+ };
+
+ pinctrl_i2c1_default: i2c1_default {
+ pinmux = <PIN_PD4__TWD1>,
+ <PIN_PD5__TWCK1>;
+ bias-disable;
+ };
+
+ pinctrl_isc_base: isc_base {
+ pinmux = <PIN_PC21__ISC_PCK>,
+ <PIN_PC22__ISC_VSYNC>,
+ <PIN_PC23__ISC_HSYNC>,
+ <PIN_PC24__ISC_MCK>;
+ bias-disable;
+ };
+
+ pinctrl_isc_data_8bit: isc_data_8bit {
+ pinmux = <PIN_PC20__ISC_D11>,
+ <PIN_PC19__ISC_D10>,
+ <PIN_PC18__ISC_D9>,
+ <PIN_PC17__ISC_D8>,
+ <PIN_PC16__ISC_D7>,
+ <PIN_PC15__ISC_D6>,
+ <PIN_PC14__ISC_D5>,
+ <PIN_PC13__ISC_D4>;
+ bias-disable;
+ };
+
+ pinctrl_isc_data_9_10: isc_data_9_10 {
+ pinmux = <PIN_PC12__ISC_D3>,
+ <PIN_PC11__ISC_D2>;
+ bias-disable;
+ };
+
+ pinctrl_isc_data_11_12: isc_data_11_12 {
+ pinmux = <PIN_PC10__ISC_D1>,
+ <PIN_PC9__ISC_D0>;
+ bias-disable;
+ };
+
+ pinctrl_key_gpio_default: key_gpio_default {
+ pinmux = <PIN_PA29__GPIO>;
+ bias-pull-up;
+ };
+
+ pinctrl_led_gpio_default: led_gpio_default {
+ pinmux = <PIN_PA10__GPIO>,
+ <PIN_PB1__GPIO>,
+ <PIN_PA31__GPIO>;
+ bias-pull-up;
+ };
+
+ pinctrl_sdmmc0_default: sdmmc0_default {
+ cmd_data {
+ pinmux = <PIN_PA1__SDMMC0_CMD>,
+ <PIN_PA2__SDMMC0_DAT0>,
+ <PIN_PA3__SDMMC0_DAT1>,
+ <PIN_PA4__SDMMC0_DAT2>,
+ <PIN_PA5__SDMMC0_DAT3>,
+ <PIN_PA6__SDMMC0_DAT4>,
+ <PIN_PA7__SDMMC0_DAT5>,
+ <PIN_PA8__SDMMC0_DAT6>,
+ <PIN_PA9__SDMMC0_DAT7>;
+ bias-disable;
+ };
+
+ ck_cd_vddsel {
+ pinmux = <PIN_PA0__SDMMC0_CK>,
+ <PIN_PA11__SDMMC0_VDDSEL>,
+ <PIN_PA13__SDMMC0_CD>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_sdmmc1_default: sdmmc1_default {
+ cmd_data {
+ pinmux = <PIN_PA28__SDMMC1_CMD>,
+ <PIN_PA18__SDMMC1_DAT0>,
+ <PIN_PA19__SDMMC1_DAT1>,
+ <PIN_PA20__SDMMC1_DAT2>,
+ <PIN_PA21__SDMMC1_DAT3>;
+ bias-disable;
+ };
+
+ conf-ck_cd {
+ pinmux = <PIN_PA22__SDMMC1_CK>,
+ <PIN_PA30__SDMMC1_CD>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_spi0_default: spi0_default {
+ pinmux = <PIN_PA14__SPI0_SPCK>,
+ <PIN_PA15__SPI0_MOSI>,
+ <PIN_PA16__SPI0_MISO>,
+ <PIN_PA17__SPI0_NPCS0>;
+ bias-disable;
+ };
+
+ pinctrl_uart1_default: uart1_default {
+ pinmux = <PIN_PD2__URXD1>,
+ <PIN_PD3__UTXD1>;
+ bias-disable;
+ };
+
+ pinctrl_uart3_default: uart3_default {
+ pinmux = <PIN_PC12__URXD3>,
+ <PIN_PC13__UTXD3>;
+ bias-disable;
+ };
+
+ pinctrl_usb_default: usb_default {
+ pinmux = <PIN_PA27__GPIO>,
+ <PIN_PD19__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_usba_vbus: usba_vbus {
+ pinmux = <PIN_PD20__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_an: mikrobus1_an {
+ pinmux = <PIN_PD25__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_an: mikrobus2_an {
+ pinmux = <PIN_PD26__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_rst: mikrobus1_rst {
+ pinmux = <PIN_PB2__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_rst: mikrobus2_rst {
+ pinmux = <PIN_PA26__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+ pinmux = <PIN_PD0__FLEXCOM4_IO4>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
+ pinmux = <PIN_PC31__FLEXCOM4_IO3>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus_spi: mikrobus_spi {
+ pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+ <PIN_PC29__FLEXCOM4_IO1>,
+ <PIN_PC30__FLEXCOM4_IO2>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_pwm: mikrobus1_pwm {
+ pinmux = <PIN_PB1__PWML1>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_pwm: mikrobus2_pwm {
+ pinmux = <PIN_PA31__PWML0>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_int: mikrobus1_int {
+ pinmux = <PIN_PB0__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_int: mikrobus2_int {
+ pinmux = <PIN_PA25__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_uart: mikrobus1_uart {
+ pinmux = <PIN_PB3__URXD4>,
+ <PIN_PB4__UTXD4>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_uart: mikrobus2_uart {
+ pinmux = <PIN_PD23__URXD2>,
+ <PIN_PD24__UTXD2>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus_i2c: mikrobus1_i2c {
+ pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+ <PIN_PA23__FLEXCOM1_IO1>;
+ bias-disable;
+ };
+
+ pinctrl_flx4_default: flx4_uart_default {
+ pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+ <PIN_PC29__FLEXCOM4_IO1>,
+ <PIN_PC30__FLEXCOM4_IO2>,
+ <PIN_PC31__FLEXCOM4_IO3>,
+ <PIN_PD0__FLEXCOM4_IO4>;
+ bias-disable;
+ };
+ };
+
+ can1: can@fc050000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_default>;
+ status = "okay";
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+ pb4 {
+ label = "USER";
+ gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+ linux,code = <0x104>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led_gpio_default>;
+ status = "okay"; /* Conflict with pwm0. */
+
+ red {
+ label = "red";
+ gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
+ };
+
+ green {
+ label = "green";
+ gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+ };
+
+ blue {
+ label = "blue";
+ gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
--- a/include/dt-bindings/pinctrl/at91.h
+++ b/include/dt-bindings/pinctrl/at91.h
@@ -37,4 +37,8 @@
#define AT91_PERIPH_C 3
#define AT91_PERIPH_D 4
+#define ATMEL_PIO_DRVSTR_LO 1
+#define ATMEL_PIO_DRVSTR_ME 2
+#define ATMEL_PIO_DRVSTR_HI 3
+
#endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */

28
target/linux/at91/legacy/config-default → target/linux/at91/sam9x/config-default
View File

@ -2,21 +2,17 @@
CONFIG_ARCH_MULTI_V4T=y
CONFIG_ARCH_MULTI_V4_V5=y
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
# CONFIG_ARM_AT91_CPUIDLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_AT91RM9200_WATCHDOG is not set
# CONFIG_AT91_SAMA5D2_ADC is not set
CONFIG_ATMEL_AIC_IRQ=y
CONFIG_ATMEL_ST=y
CONFIG_AT_XDMAC=y
CONFIG_BACKLIGHT_ATMEL_LCDC=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SIZE_MBYTES=16
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
CONFIG_CPU_32v4T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV4T=y
@ -28,6 +24,7 @@ CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_IDLE_GOV_MENU is not set
CONFIG_CPU_NO_EFFICIENT_FFS=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_TLB_V4WBI=y
@ -35,8 +32,7 @@ CONFIG_CPU_USE_DOMAINS=y
CONFIG_CRC7=y
CONFIG_CRC_CCITT=y
CONFIG_CRC_ITU_T=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DMA_CMA=y
CONFIG_DEBUG_INFO=y
CONFIG_FB_ATMEL=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
@ -44,12 +40,20 @@ CONFIG_GENERIC_ATOMIC64=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HZ=128
CONFIG_HZ_FIXED=128
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_HZ_PERIODIC=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_SPI=y
# CONFIG_MTD_SPI_NOR is not set
CONFIG_NEED_KUSER_HELPERS=y
CONFIG_RFKILL_REGULATOR=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC is not set
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_RTC_DRV_AT91SAM9=y
# CONFIG_SAMA5D4_WATCHDOG is not set
# CONFIG_SND_ARM is not set
# CONFIG_SND_ATMEL_SOC_CLASSD is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_SPI is not set
CONFIG_SOC_AT91RM9200=y
@ -57,4 +61,4 @@ CONFIG_SOC_AT91SAM9=y
CONFIG_SOC_SAM_V4_V5=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_USB_ATMEL_USBA is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set

7
target/linux/at91/sam9x/target.mk Normal file
View File

@ -0,0 +1,7 @@
BOARDNAME:= SAM9X Boards (ARMv5)
CPU_TYPE:=arm926ej-s
define Target/Description
Build generic firmware for Microchip AT91 SAM9x platforms
using the ARMv5 instruction set.
endef

0
target/linux/at91/sama5/config-default Normal file
View File

10
target/linux/at91/sama5/target.mk Normal file
View File

@ -0,0 +1,10 @@
BOARDNAME:=SAMA5 boards(Cortex-A5)
CPU_TYPE:=cortex-a5
CPU_SUBTYPE:=vfpv4
FEATURES+=fpu
DEFAULT_PACKAGES += kmod-usb2
define Target/Description
Build generic firmware for Microchip(Atmel AT91) SAMA5D2,
SAMA5D3 and SAMA5D4 MPU's using the ARMv7 instruction set.
endef

44
target/linux/at91/sama5d2/config-default
View File

@ -1,44 +0,0 @@
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_AT_XDMAC=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_CAN=y
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SIZE_MBYTES=16
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DMA_CMA=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_MEMCG=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_PAGE_COUNTER=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_SAMA5D4_WATCHDOG=y
CONFIG_SND_ATMEL_SOC_CLASSD=y
CONFIG_SOC_SAMA5D2=y
CONFIG_SOC_SAM_V7=y
CONFIG_SPI_ATMEL_QUADSPI=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
# CONFIG_USB_ATMEL_USBA is not set

10
target/linux/at91/sama5d2/target.mk
View File

@ -1,10 +0,0 @@
BOARDNAME:=SAMA5D2 boards(Cortex-A5)
CPU_TYPE:=cortex-a5
CPU_SUBTYPE:=neon-vfpv4
FEATURES+=fpu
DEFAULT_PACKAGES += kmod-usb2
define Target/Description
Build generic firmware for Microchip(Atmel AT91) SAMA5D2 MPU's
using the ARMv7 instruction set.
endef

39
target/linux/at91/sama5d3/config-default
View File

@ -1,39 +0,0 @@
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_AT_XDMAC=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SIZE_MBYTES=16
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DMA_CMA=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_SAMA5D4_WATCHDOG=y
CONFIG_SND_ATMEL_SOC_CLASSD=y
CONFIG_SOC_SAMA5D3=y
CONFIG_SOC_SAM_V7=y
CONFIG_SPI_ATMEL_QUADSPI=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
# CONFIG_USB_ATMEL_USBA is not set

10
target/linux/at91/sama5d3/target.mk
View File

@ -1,10 +0,0 @@
BOARDNAME:=SAMA5D3 boards(Cortex-A5)
CPU_TYPE:=cortex-a5
CPU_SUBTYPE:=vfpv4
FEATURES+=fpu
DEFAULT_PACKAGES += kmod-usb2
define Target/Description
Build generic firmware for Microchip(Atmel AT91) SAMA5D3 MPU's
using the ARMv7 instruction set.
endef

39
target/linux/at91/sama5d4/config-default
View File

@ -1,39 +0,0 @@
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_AT_XDMAC=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SIZE_MBYTES=16
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DMA_CMA=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_SAMA5D4_WATCHDOG=y
CONFIG_SND_ATMEL_SOC_CLASSD=y
CONFIG_SOC_SAMA5D4=y
CONFIG_SOC_SAM_V7=y
CONFIG_SPI_ATMEL_QUADSPI=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
# CONFIG_USB_ATMEL_USBA is not set

10
target/linux/at91/sama5d4/target.mk
View File

@ -1,10 +0,0 @@
BOARDNAME:=SAMA5D4 boards(Cortex-A5)
CPU_TYPE:=cortex-a5
CPU_SUBTYPE:=neon-vfpv4
FEATURES+=fpu
DEFAULT_PACKAGES += kmod-usb2
define Target/Description
Build generic firmware for Microchip(Atmel AT91) SAMA5D4 MPU's
using the ARMv7 instruction set.
endef