ipq807x: add QNAP 301w (AX WIFI router with 4 1G and 2 10G ports) support

package/boot/uboot-envtools/files/ipq807x

@@ -15,6 +15,11 @@ xiaomi,ax9000)
 	[ -n "$idx" ] && \
 		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x20000"
 	;;
+qnap,301w)
+	idx="$(find_mtd_index 0:appsblenv)"
+	[ -n "$idx" ] && \
+		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x20000" "0x20000" "1"
+	;;
 esac
 
 config_load ubootenv

package/firmware/ipq-wifi/Makefile

@@ -55,6 +55,7 @@ ALLWIFIBOARDS:= \
 	plasmacloud_pa1200 \
 	plasmacloud_pa2200 \
 	p2w_r619ac \
+	qnap_301w \
 	qxwlan_e2600ac \
 	redmi_ax6 \
 	xiaomi_ax3600 \
@@ -160,6 +161,7 @@ $(eval $(call generate-ipq-wifi-package,netgear_wac510,Netgear WAC510))
 $(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
 $(eval $(call generate-ipq-wifi-package,plasmacloud_pa2200,Plasma Cloud PA2200))
 $(eval $(call generate-ipq-wifi-package,p2w_r619ac,P&W R619AC))
+$(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
 $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
 $(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
 $(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))

target/linux/ipq807x/base-files/etc/board.d/01_leds

@@ -11,6 +11,14 @@ xiaomi,ax3600|\
 redmi,ax6)
 	ucidef_set_led_netdev "wan" "WAN" "blue:network" "eth0"
 	;;
+qnap,301w)
+	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
+	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
+	ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "eth2"
+	ucidef_set_led_netdev "lan4" "LAN4" "green:lan4" "eth3"
+	ucidef_set_led_netdev "10G_1" "10G_1" "green:10g_1" "eth4"
+	ucidef_set_led_netdev "10G_2" "10G_2" "green:10g_2" "eth5"
+	;;
 esac
 
 board_config_flush

target/linux/ipq807x/base-files/etc/board.d/02_network

@@ -11,6 +11,9 @@ ipq807x_setup_interfaces()
 	local board="$1"
 
 	case "$board" in
+	qnap,301w)
+		ucidef_set_interfaces_lan_wan "eth0 eth1 eth2 eth3 eth4" "eth5"
+		;;
 	redmi,ax6|\
 	xiaomi,ax3600)
 		ucidef_set_interfaces_lan_wan "eth1 eth2 eth3" "eth0"

target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata

@@ -9,6 +9,7 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath11k/IPQ8074/hw2.0/caldata.bin")
 	case "$board" in
+	qnap,301w|\
 	redmi,ax6|\
 	xiaomi,ax3600|\
 	xiaomi,ax9000)

target/linux/ipq807x/base-files/lib/upgrade/mmc.sh

@@ -0,0 +1,83 @@
+#
+# Copyright (C) 2016 lede-project.org
+#
+
+# this can be used as a generic mmc upgrade script
+# just add a device entry in platform.sh, 
+# define "kernelname" and "rootfsname" and call mmc_do_upgrade
+# after the kernel and rootfs flash a loopdev (as overlay) is 
+# setup on top of the rootfs partition
+# for the proper function a padded rootfs image is needed, basically 
+# append "pad-to 64k" to the image definition
+# this is based on the ipq806x zyxel.sh mmc upgrade
+
+. /lib/functions.sh
+
+mmc_do_upgrade() {
+	local tar_file="$1"
+	local rootfs=
+	local kernel=
+
+			[ -z "$kernel" ] && kernel=$(find_mmc_part ${kernelname})
+			[ -z "$rootfs" ] && rootfs=$(find_mmc_part ${rootfsname})
+
+			[ -z "$kernel" ] && echo "Upgrade failed: kernel partition not found! Rebooting..." && reboot -f
+			[ -z "$rootfs" ] && echo "Upgrade failed: rootfs partition not found! Rebooting..." && reboot -f
+
+	mmc_do_flash $tar_file $kernel $rootfs
+
+	return 0
+}
+
+mmc_do_flash() {
+	local tar_file=$1
+	local kernel=$2
+	local rootfs=$3
+	
+	# keep sure its unbound
+	losetup --detach-all || {
+		echo Failed to detach all loop devices. Skip this try.
+		reboot -f
+	}
+
+	# use the first found directory in the tar archive
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	echo "flashing kernel to $kernel"
+	tar xf $tar_file ${board_dir}/kernel -O >$kernel
+
+	echo "flashing rootfs to ${rootfs}"
+	tar xf $tar_file ${board_dir}/root -O >"${rootfs}"
+
+	# a padded rootfs is needed for overlay fs creation
+	local offset=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
+	[ $offset -lt 65536 ] && {
+		echo Wrong size for rootfs: $offset
+		sleep 10
+		reboot -f
+	}
+
+	# Mount loop for rootfs_data
+	local loopdev="$(losetup -f)"
+	losetup -o $offset $loopdev $rootfs || {
+		echo "Failed to mount looped rootfs_data."
+		sleep 10
+		reboot -f
+	}
+
+	echo "Format new rootfs_data at position ${offset}."
+	mkfs.ext4 -F -L rootfs_data $loopdev
+	mkdir /tmp/new_root
+	mount -t ext4 $loopdev /tmp/new_root && {
+		echo "Saving config to rootfs_data at position ${offset}."
+		cp -v "$UPGRADE_BACKUP" "/tmp/new_root/$BACKUP_FILE"
+		umount /tmp/new_root
+	}
+
+	# Cleanup
+	losetup -d $loopdev >/dev/null 2>&1
+	sync
+	umount -a
+	reboot -f
+}

target/linux/ipq807x/base-files/lib/upgrade/platform.sh

@@ -10,6 +10,11 @@ platform_check_image() {
 
 platform_do_upgrade() {
 	case "$(board_name)" in
+	qnap,301w)
+		kernelname="0:HLOS"
+		rootfsname="rootfs"
+		mmc_do_upgrade "$1"
+		;;
 	redmi,ax6|\
 	xiaomi,ax3600|\
 	xiaomi,ax9000)

target/linux/ipq807x/config-5.10

@@ -1,6 +1,7 @@
 CONFIG_64BIT=y
 # CONFIG_APQ_GCC_8084 is not set
 # CONFIG_APQ_MMCC_8084 is not set
+CONFIG_AQUANTIA_PHY=y
 CONFIG_ARCH_DMA_ADDR_T_64BIT=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_KEEP_MEMBLOCK=y

target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts

@@ -0,0 +1,823 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2021, Dirk Buchwalder <buchwalder@posteo.de> */
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "QNAP 301w";
+	compatible = "qnap,301w", "qcom,ipq8074";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		/*
+		 * Aliases as required by u-boot
+		 * to patch MAC addresses
+		 */
+		led-boot = &led_system_red;
+		led-failsafe = &led_system_red;
+		led-running = &led_pwr_green;
+		led-upgrade = &led_system_red;
+		ethernet0 = &dp1;
+		ethernet1 = &dp2;
+		ethernet2 = &dp3;
+		ethernet3 = &dp4;
+		ethernet4 = &dp5;
+		ethernet5 = &dp6;
+		label-mac-device = &dp1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_system_green: system-green {
+			label = "green:system";
+			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led_system_red: system-red {
+			label = "red:system";
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led_pwr_green: pwr-green {
+			label = "green:pwr";
+			gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led_wifi_green: wifi-green {
+			label = "green:wifi";
+			gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led_lan1_green: lan1-green {
+			label = "green:lan1";
+			gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led_lan1_amber: lan1-amber {
+			label = "amber:lan1";
+			gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+		};
+
+		led_lan2_green: lan2-green {
+			label = "green:lan2";
+			gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led_lan2_amber: lan2-amber {
+			label = "amber:lan2";
+			gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+		};
+
+		led_lan3_green: lan3-green {
+			label = "green:lan3";
+			gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led_lan3_amber: lan3-amber {
+			label = "amber:lan3";
+			gpios = <&tlmm 13 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+		};
+
+		led_lan4_green: lan4-green {
+			label = "green:lan4";
+			gpios = <&tlmm 14 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led_lan4_amber: lan4-amber {
+			label = "amber:lan4";
+			gpios = <&tlmm 15 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+		};
+
+		led_10g_1_green: 10g_1-green {
+			label = "green:10g_1";
+			gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led_10g_1_amber: 10g_1-amber {
+			label = "amber:10g_1";
+			gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+		};
+
+		led_10g_2_green: 10g_2-green {
+			label = "green:10g_2";
+			gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led_10g_2_amber: 10g_2-amber {
+			label = "amber:10g_2";
+			gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+		};
+	};
+};
+
+&tlmm {
+
+	mdio_pins: mdio-pins {
+		mdc {
+			pins = "gpio68";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mdio {
+			pins = "gpio69";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	button_pins: button_pins {
+		wps_button {
+			pins = "gpio57";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		rst_button {
+			pins = "gpio67";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	qpic_pins: qpic-pins {
+			status = "disabled";
+			/*disabling qpic-pins due to the leds are using all of the gpios*/
+	};
+
+	leds_pins: leds_pinmux {
+		led_pwr_green {
+			pins = "gpio4";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_system_green {
+			pins = "gpio1";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_system_red {
+			pins = "gpio3";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_lan1_green {
+			pins = "gpio6";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_lan1_amber {
+			pins = "gpio7";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		}; 
+		led_lan2_green {
+			pins = "gpio8";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_lan2_amber {
+			pins = "gpio11";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_lan3_green {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_lan3_amber {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_lan4_green {
+			pins = "gpio14";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_lan4_amber {
+			pins = "gpio15";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_10g_1_green {
+			pins = "gpio54";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_10g_1_amber {
+			pins = "gpio56";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_10g_2_green {
+			pins = "gpio51";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_10g_2_amber {
+			pins = "gpio52";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_wifi_green {
+			pins = "gpio42";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+    };
+};
+
+&blsp1_uart5 {
+	status = "okay";
+};
+
+&prng {
+	status = "okay";
+};
+
+&ssphy_0 {
+	status = "okay";
+};
+
+&qusb_phy_0 {
+	status = "okay";
+};
+
+&ssphy_1 {
+	status = "okay";
+};
+
+&qusb_phy_1 {
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "qcom,smem-part";
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+
+	ethernet-phy@0 {
+		compatible ="ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+		reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+	};
+
+	ethernet-phy@8 {
+		compatible ="ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+	};
+
+	ethernet-phy@16 {
+		reg = <16>;
+	};
+
+	ethernet-phy@17 {
+		reg = <17>;
+	};
+
+	ethernet-phy@18 {
+		reg = <18>;
+	};
+
+	ethernet-phy@19 {
+		reg = <19>;
+	};
+
+};
+
+&sdhc_1 {
+		/* According to the stock dts from the QNAP gpl drop
+		 * the emmc has a problem with the hs400 > hs200 speed switch.
+		 * But at the momment it doesn't seems possible to run that card in hs200 mode,
+		 * it doesn't get recognized without the hs400 mode.
+		 * Unfortunately it's not stable in hs400 mode so reduce the speed to mmc highspeed.
+		*/
+		no-1-8-v;
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		max-frequency   = <5000000>;
+		vqmmc-supply = <&ldo11>;
+		status = "okay";
+};
+
+&switch {
+	status = "okay";
+
+	switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+	switch_lan_bmp = <0x3e>; /* lan port bitmap */
+	switch_wan_bmp = <0xc0>; /* wan port bitmap */
+	switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+	switch_mac_mode1 = <0xd>; /* mac mode for uniphy instance1*/
+	switch_mac_mode2 = <0xd>; /* mac mode for uniphy instance2*/
+	bm_tick_mode = <0>; /* bm tick mode */
+	tm_tick_mode = <0>; /* tm tick mode */
+
+	qcom,port_phyinfo {
+		port@0 {
+			port_id = <1>;
+			phy_address = <16>;
+		};
+		port@1 {
+			port_id = <2>;
+			phy_address = <17>;
+		};
+		port@2 {
+			port_id = <3>;
+			phy_address = <18>;
+		};
+		port@3 {
+			port_id = <4>;
+			phy_address = <19>;
+		};
+		port@4 {
+			port_id = <5>;
+			phy_address = <8>;
+			compatible = "ethernet-phy-ieee802.3-c45";
+			ethernet-phy-ieee802.3-c45;
+		};
+		port@5 {
+			port_id = <6>;
+			phy_address = <0>;
+			compatible = "ethernet-phy-ieee802.3-c45";
+			ethernet-phy-ieee802.3-c45;
+		};
+	};
+
+	port_scheduler_resource {
+		port@0 {
+			port_id = <0>;
+			ucast_queue = <0 143>;
+			mcast_queue = <256 271>;
+			l0sp = <0 35>;
+			l0cdrr = <0 47>;
+			l0edrr = <0 47>;
+			l1cdrr = <0 7>;
+			l1edrr = <0 7>;
+		};
+		port@1 {
+			port_id = <1>;
+			ucast_queue = <144 159>;
+			mcast_queue = <272 275>;
+			l0sp = <36 39>;
+			l0cdrr = <48 63>;
+			l0edrr = <48 63>;
+			l1cdrr = <8 11>;
+			l1edrr = <8 11>;
+		};
+		port@2 {
+			port_id = <2>;
+			ucast_queue = <160 175>;
+			mcast_queue = <276 279>;
+			l0sp = <40 43>;
+			l0cdrr = <64 79>;
+			l0edrr = <64 79>;
+			l1cdrr = <12 15>;
+			l1edrr = <12 15>;
+		};
+		port@3 {
+			port_id = <3>;
+			ucast_queue = <176 191>;
+			mcast_queue = <280 283>;
+			l0sp = <44 47>;
+			l0cdrr = <80 95>;
+			l0edrr = <80 95>;
+			l1cdrr = <16 19>;
+			l1edrr = <16 19>;
+		};
+		port@4 {
+			port_id = <4>;
+			ucast_queue = <192 207>;
+			mcast_queue = <284 287>;
+			l0sp = <48 51>;
+			l0cdrr = <96 111>;
+			l0edrr = <96 111>;
+			l1cdrr = <20 23>;
+			l1edrr = <20 23>;
+		};
+		port@5 {
+			port_id = <5>;
+			ucast_queue = <208 223>;
+			mcast_queue = <288 291>;
+			l0sp = <52 55>;
+			l0cdrr = <112 127>;
+			l0edrr = <112 127>;
+			l1cdrr = <24 27>;
+			l1edrr = <24 27>;
+		};
+		port@6 {
+			port_id = <6>;
+			ucast_queue = <224 239>;
+			mcast_queue = <292 295>;
+			l0sp = <56 59>;
+			l0cdrr = <128 143>;
+			l0edrr = <128 143>;
+			l1cdrr = <28 31>;
+			l1edrr = <28 31>;
+		};
+		port@7 {
+			port_id = <7>;
+			ucast_queue = <240 255>;
+			mcast_queue = <296 299>;
+			l0sp = <60 63>;
+			l0cdrr = <144 159>;
+			l0edrr = <144 159>;
+			l1cdrr = <32 35>;
+			l1edrr = <32 35>;
+		};
+	};
+	port_scheduler_config {
+		port@0 {
+			port_id = <0>;
+			l1scheduler {
+				group@0 {
+					sp = <0 1>; /*L0 SPs*/
+					/*cpri cdrr epri edrr*/
+					cfg = <0 0 0 0>;
+				};
+			};
+			l0scheduler {
+				group@0 {
+					/*unicast queues*/
+					ucast_queue = <0 4 8>;
+					/*multicast queues*/
+					mcast_queue = <256 260>;
+					/*sp cpri cdrr epri edrr*/
+					cfg = <0 0 0 0 0>;
+				};
+				group@1 {
+					ucast_queue = <1 5 9>;
+					mcast_queue = <257 261>;
+					cfg = <0 1 1 1 1>;
+				};
+				group@2 {
+					ucast_queue = <2 6 10>;
+					mcast_queue = <258 262>;
+					cfg = <0 2 2 2 2>;
+				};
+				group@3 {
+					ucast_queue = <3 7 11>;
+					mcast_queue = <259 263>;
+					cfg = <0 3 3 3 3>;
+				};
+			};
+		};
+		port@1 {
+			port_id = <1>;
+			l1scheduler {
+				group@0 {
+					sp = <36>;
+					cfg = <0 8 0 8>;
+				};
+				group@1 {
+					sp = <37>;
+					cfg = <1 9 1 9>;
+				};
+			};
+			l0scheduler {
+				group@0 {
+					ucast_queue = <144>;
+					ucast_loop_pri = <16>;
+					mcast_queue = <272>;
+					mcast_loop_pri = <4>;
+					cfg = <36 0 48 0 48>;
+				};
+			};
+		};
+		port@2 {
+			port_id = <2>;
+			l1scheduler {
+				group@0 {
+					sp = <40>;
+					cfg = <0 12 0 12>;
+				};
+				group@1 {
+					sp = <41>;
+					cfg = <1 13 1 13>;
+				};
+			};
+			l0scheduler {
+				group@0 {
+					ucast_queue = <160>;
+					ucast_loop_pri = <16>;
+					mcast_queue = <276>;
+					mcast_loop_pri = <4>;
+					cfg = <40 0 64 0 64>;
+				};
+			};
+		};
+		port@3 {
+			port_id = <3>;
+			l1scheduler {
+				group@0 {
+					sp = <44>;
+					cfg = <0 16 0 16>;
+				};
+				group@1 {
+					sp = <45>;
+					cfg = <1 17 1 17>;
+				};
+			};
+			l0scheduler {
+				group@0 {
+					ucast_queue = <176>;
+					ucast_loop_pri = <16>;
+					mcast_queue = <280>;
+					mcast_loop_pri = <4>;
+					cfg = <44 0 80 0 80>;
+				};
+			};
+		};
+		port@4 {
+			port_id = <4>;
+			l1scheduler {
+				group@0 {
+					sp = <48>;
+					cfg = <0 20 0 20>;
+				};
+				group@1 {
+					sp = <49>;
+					cfg = <1 21 1 21>;
+				};
+			};
+			l0scheduler {
+				group@0 {
+					ucast_queue = <192>;
+					ucast_loop_pri = <16>;
+					mcast_queue = <284>;
+					mcast_loop_pri = <4>;
+					cfg = <48 0 96 0 96>;
+				};
+			};
+		};
+		port@5 {
+			port_id = <5>;
+			l1scheduler {
+				group@0 {
+					sp = <52>;
+					cfg = <0 24 0 24>;
+				};
+				group@1 {
+					sp = <53>;
+					cfg = <1 25 1 25>;
+				};
+			};
+			l0scheduler {
+				group@0 {
+					ucast_queue = <208>;
+					ucast_loop_pri = <16>;
+					mcast_queue = <288>;
+					mcast_loop_pri = <4>;
+					cfg = <52 0 112 0 112>;
+				};
+			};
+		};
+		port@6 {
+			port_id = <6>;
+			l1scheduler {
+				group@0 {
+					sp = <56>;
+					cfg = <0 28 0 28>;
+				};
+				group@1 {
+					sp = <57>;
+					cfg = <1 29 1 29>;
+				};
+			};
+			l0scheduler {
+				group@0 {
+					ucast_queue = <224>;
+					ucast_loop_pri = <16>;
+					mcast_queue = <292>;
+					mcast_loop_pri = <4>;
+					cfg = <56 0 128 0 128>;
+				};
+			};
+		};
+		port@7 {
+			port_id = <7>;
+			l1scheduler {
+				group@0 {
+					sp = <60>;
+					cfg = <0 32 0 32>;
+				};
+				group@1 {
+					sp = <61>;
+					cfg = <1 33 1 33>;
+				};
+			};
+			l0scheduler {
+				group@0 {
+					ucast_queue = <240>;
+					ucast_loop_pri = <16>;
+					mcast_queue = <296>;
+					cfg = <60 0 144 0 144>;
+				};
+			};
+		};
+	};
+};
+
+&edma {
+	status = "okay";
+};
+
+&soc {
+	dp1: dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <1>;
+		reg = <0x3a001000 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <16>;
+		phy-mode = "sgmii";
+		mdio-bus = <&mdio>;
+	};
+
+	dp2: dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <2>;
+		reg = <0x3a001200 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <17>;
+		phy-mode = "sgmii";
+		mdio-bus = <&mdio>;
+	};
+
+	dp3: dp3 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <3>;
+		reg = <0x3a001400 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <18>;
+		phy-mode = "sgmii";
+		mdio-bus = <&mdio>;
+	};
+
+	dp4: dp4 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <4>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <19>;
+		phy-mode = "sgmii";
+		mdio-bus = <&mdio>;
+	};
+
+	dp5: dp5 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <5>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <1>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <8>;
+		phy-mode = "sgmii";
+		mdio-bus = <&mdio>;
+	};
+
+	dp6: dp6 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <6>;
+		reg = <0x3a007000 0x3fff>;
+		qcom,mactype = <1>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <0>;
+		phy-mode = "sgmii";
+		mdio-bus = <&mdio>;
+	};
+};
+
+&wifi {
+	status = "okay";
+	/* using board_id 0xff is intentionally
+	 * as the stock firmware is also using this default board_id
+	 */
+	qcom,board_id = <0xff>;
+	qcom,ath11k-calibration-variant = "QNAP-301w";
+};

target/linux/ipq807x/image/generic.mk

@@ -17,6 +17,21 @@ define Device/UbiFit
 	IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
 endef
 
+define Device/qnap_301w
+	$(call Device/FitImage)
+	DEVICE_VENDOR := QNAP
+	DEVICE_MODEL := 301w
+	DEVICE_DTS_CONFIG := config@hk01
+	KERNEL_SIZE := 16384k
+	BLOCKSIZE := 512k
+	SOC := ipq8072
+	IMAGES += factory.bin sysupgrade.bin
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := ipq-wifi-qnap_301w e2fsprogs kmod-fs-ext4 losetup
+endef
+TARGET_DEVICES += qnap_301w
+
 define Device/redmi_ax6
 	$(call Device/xiaomi_ax3600)
 	DEVICE_VENDOR := Redmi

target/linux/ipq807x/patches-5.10/900-arm64-dts-add-OpenWrt-DTS-files.patch

@@ -12,10 +12,11 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
 
 --- a/arch/arm64/boot/dts/qcom/Makefile
 +++ b/arch/arm64/boot/dts/qcom/Makefile
-@@ -3,6 +3,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.d
+@@ -3,6 +3,10 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.d
  dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
++dtb-$(CONFIG_ARCH_QCOM)	+= ipq8072-301w.dtb
 +dtb-$(CONFIG_ARCH_QCOM)	+= ipq8071-ax6.dtb
 +dtb-$(CONFIG_ARCH_QCOM)	+= ipq8071-ax3600.dtb
 +dtb-$(CONFIG_ARCH_QCOM)	+= ipq8071-mf269.dtb