diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index cd94be66d..2e613a181 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -85,6 +85,7 @@ yuncore,a930|\ yuncore,xd3200|\ yuncore,xd4200|\ ziking,cpe46b|\ +zte,e8820|\ zyxel,nbg6616) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000" ;; diff --git a/target/linux/ath79/dts/qca9563_zte_e8820.dts b/target/linux/ath79/dts/qca9563_zte_e8820.dts new file mode 100644 index 000000000..f70ce8713 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_zte_e8820.dts @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca956x.dtsi" + +/ { + model = "ZTE E8820"; + compatible = "zte,e8820", "qca,qca9563"; + + aliases { + led-boot = &power_green; + led-failsafe = &power_green; + led-running = &power_green; + led-upgrade = &power_green; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + usb1 { + label = "zte:green:usb1"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&hub_port1>; + linux,default-trigger = "usbport"; + }; + + usb2 { + label = "zte:green:usb2"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + trigger-sources = <&hub_port0>; + linux,default-trigger = "usbport"; + }; + + power_green: power_green { + label = "zte:green:power"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan5g_green { + label = "zte:green:wlan5g"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wlan2g_green { + label = "zte:green:wlan2g"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + }; + + keys { + compatible = "gpio-keys"; + + wifi { + label = "wifi"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + + reset { + label = "reset"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + + wps { + label = "wps"; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + }; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x050000 0xfa0000>; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + + qca,ar8327-initvals = < + 0x04 0x00000080 /* PORT0 PAD MODE CTRL */ + 0x50 0xcc35cc35 /* LED_CTRL0 */ + 0x54 0xca35ca35 /* LED_CTRL1 */ + 0x58 0xc935c935 /* LED_CTRL2 */ + 0x5c 0x03ffff00 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0x03000101 0x00000101 0x00001919>; + + mtd-mac-address = <&art 0x0>; + phy-mode = "sgmii"; + phy-handle = <&phy0>; +}; + +&pcie { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0xc>; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port0: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index bc3208191..263c09ce7 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -265,7 +265,8 @@ ath79_setup_interfaces() sitecom,wlr-7100|\ tplink,archer-c2-v3|\ tplink,tl-wr1043nd-v4|\ - tplink,tl-wr1043n-v5) + tplink,tl-wr1043n-v5|\ + zte,e8820) ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" ;; @@ -738,6 +739,11 @@ ath79_setup_macs() xiaomi,aiot-ac2350) lan_mac=$(mtd_get_mac_binary art 0x1002) ;; + zte,e8820) + wan_mac=$(mtd_get_mac_binary art 0) + lan_mac=$(macaddr_add "$wan_mac" 1) + label_mac=$wan_mac + ;; zyxel,nbg6616) label_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) ;; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index b8e99a661..f33818b36 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -161,6 +161,10 @@ case "$FIRMWARE" in caldata_extract "art" 0x5000 0x844 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) 1) ;; + zte,e8820) + caldata_extract "art" 0x5000 0x844 + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 3) + ;; esac ;; "ath10k/cal-pci-0000:01:00.0.bin") diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 769c0ee1d..f9bd6fe37 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -2558,6 +2558,15 @@ define Device/zbtlink_zbt-wd323 endef TARGET_DEVICES += zbtlink_zbt-wd323 +define Device/zte_e8820 + SOC := qca9563 + DEVICE_VENDOR := ZTE + DEVICE_MODEL := E8820 + IMAGE_SIZE := 16000k + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct +endef +TARGET_DEVICES += zte_e8820 + define Device/zyxel_nbg6616 SOC := qca9557 DEVICE_VENDOR := ZyXEL