diff --git a/package/network/services/openvpn/Config-mbedtls.in b/package/network/services/openvpn/Config-mbedtls.in
index beac49202..3cf233b8f 100644
--- a/package/network/services/openvpn/Config-mbedtls.in
+++ b/package/network/services/openvpn/Config-mbedtls.in
@@ -2,16 +2,12 @@ if PACKAGE_openvpn-mbedtls
 
 config OPENVPN_mbedtls_ENABLE_LZO
 	bool "Enable LZO compression support"
-	default y
+	default n
 
 config OPENVPN_mbedtls_ENABLE_LZ4
 	bool "Enable LZ4 compression support"
 	default y
 
-config OPENVPN_mbedtls_ENABLE_SERVER
-	bool "Enable server support (otherwise only client mode is support)"
-	default y
-
 #config OPENVPN_mbedtls_ENABLE_EUREPHIA
 #	bool "Enable support for the eurephia plug-in"
 #	default n
diff --git a/package/network/services/openvpn/Config-nossl.in b/package/network/services/openvpn/Config-nossl.in
index 79140ad5d..2e9a5d35b 100644
--- a/package/network/services/openvpn/Config-nossl.in
+++ b/package/network/services/openvpn/Config-nossl.in
@@ -47,4 +47,4 @@ config OPENVPN_nossl_ENABLE_SMALL
 	  enable smaller executable size (disable OCC, usage
 	  message, and verb 4 parm list)
 
-endif
+endif
\ No newline at end of file
diff --git a/package/network/services/openvpn/Config-openssl.in b/package/network/services/openvpn/Config-openssl.in
index f2b618eff..335bbaa2c 100644
--- a/package/network/services/openvpn/Config-openssl.in
+++ b/package/network/services/openvpn/Config-openssl.in
@@ -2,7 +2,7 @@ if PACKAGE_openvpn-openssl
 
 config OPENVPN_openssl_ENABLE_LZO
 	bool "Enable LZO compression support"
-	default y
+	default n
 
 config OPENVPN_openssl_ENABLE_LZ4
 	bool "Enable LZ4 compression support"
@@ -12,10 +12,6 @@ config OPENVPN_openssl_ENABLE_X509_ALT_USERNAME
 	bool "Enable the --x509-username-field feature"
 	default n
 
-config OPENVPN_openssl_ENABLE_SERVER
-	bool "Enable server support (otherwise only client mode is support)"
-	default y
-
 #config OPENVPN_openssl_ENABLE_EUREPHIA
 #	bool "Enable support for the eurephia plug-in"
 #	default n
diff --git a/package/network/services/openvpn/Makefile b/package/network/services/openvpn/Makefile
index f1170bbd3..5c8a0a4fa 100644
--- a/package/network/services/openvpn/Makefile
+++ b/package/network/services/openvpn/Makefile
@@ -9,14 +9,14 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=openvpn
 
-PKG_VERSION:=2.4.9
-PKG_RELEASE:=2
+PKG_VERSION:=2.5.0
+PKG_RELEASE:=1
 
 PKG_SOURCE_URL:=\
 	https://build.openvpn.net/downloads/releases/ \
 	https://swupdate.openvpn.net/community/releases/
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_HASH:=641f3add8694b2ccc39fd4fd92554e4f089ad16a8db6d2b473ec284839a5ebe2
+PKG_HASH:=029a426e44d656cb4e1189319c95fe6fc9864247724f5599d99df9c4c3478fbd
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
@@ -37,16 +37,11 @@ define Package/openvpn/Default
   MENU:=1
   DEPENDS:=+kmod-tun +OPENVPN_$(1)_ENABLE_LZO:liblzo +OPENVPN_$(1)_ENABLE_IPROUTE2:ip $(3)
   VARIANT:=$(1)
-ifeq ($(1),nossl)
-  PROVIDES:=openvpn
-else
   PROVIDES:=openvpn openvpn-crypto
-endif
 endef
 
 Package/openvpn-openssl=$(call Package/openvpn/Default,openssl,OpenSSL,+PACKAGE_openvpn-openssl:libopenssl)
 Package/openvpn-mbedtls=$(call Package/openvpn/Default,mbedtls,mbedTLS,+PACKAGE_openvpn-mbedtls:libmbedtls)
-Package/openvpn-nossl=$(call Package/openvpn/Default,nossl,plaintext (no SSL))
 
 define Package/openvpn/config/Default
 	source "$(SOURCE)/Config-$(1).in"
@@ -54,7 +49,6 @@ endef
 
 Package/openvpn-openssl/config=$(call Package/openvpn/config/Default,openssl)
 Package/openvpn-mbedtls/config=$(call Package/openvpn/config/Default,mbedtls)
-Package/openvpn-nossl/config=$(call Package/openvpn/config/Default,nossl)
 
 ifeq ($(BUILD_VARIANT),mbedtls)
 CONFIG_OPENVPN_MBEDTLS:=y
@@ -62,13 +56,8 @@ endif
 ifeq ($(BUILD_VARIANT),openssl)
 CONFIG_OPENVPN_OPENSSL:=y
 endif
-ifeq ($(BUILD_VARIANT),nossl)
-CONFIG_OPENVPN_NOSSL:=y
-endif
 
 CONFIGURE_VARS += \
-	IFCONFIG=/sbin/ifconfig \
-	ROUTE=/sbin/route \
 	IPROUTE=/sbin/ip \
 	NETSTAT=/sbin/netstat
 
@@ -86,7 +75,6 @@ define Build/Configure
 		$(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_LZO),--enable,--disable)-lzo \
 		$(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_LZ4),--enable,--disable)-lz4 \
 		$(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_X509_ALT_USERNAME),--enable,--disable)-x509-alt-username \
-		$(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_SERVER),--enable,--disable)-server \
 		$(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_MANAGEMENT),--enable,--disable)-management \
 		$(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_FRAGMENT),--enable,--disable)-fragment \
 		$(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_MULTIHOME),--enable,--disable)-multihome \
@@ -94,7 +82,6 @@ define Build/Configure
 		$(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_DEF_AUTH),--enable,--disable)-def-auth \
 		$(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_PF),--enable,--disable)-pf \
 		$(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_PORT_SHARE),--enable,--disable)-port-share \
-		$(if $(CONFIG_OPENVPN_NOSSL),--disable-crypto,--enable-crypto) \
 		$(if $(CONFIG_OPENVPN_OPENSSL),--with-crypto-library=openssl) \
 		$(if $(CONFIG_OPENVPN_MBEDTLS),--with-crypto-library=mbedtls) \
 	)
@@ -112,6 +99,7 @@ define Package/openvpn-$(BUILD_VARIANT)/install
 		$(1)/etc/init.d \
 		$(1)/etc/config \
 		$(1)/etc/openvpn \
+		$(1)/lib/functions \
 		$(1)/lib/upgrade/keep.d \
 		$(1)/usr/libexec \
 		$(1)/etc/hotplug.d/openvpn
@@ -128,6 +116,10 @@ define Package/openvpn-$(BUILD_VARIANT)/install
 		files/usr/libexec/openvpn-hotplug \
 		$(1)/usr/libexec/openvpn-hotplug
 
+	$(INSTALL_DATA) \
+		files/lib/functions/openvpn.sh \
+		$(1)/lib/functions/openvpn.sh
+
 	$(INSTALL_DATA) \
 		files/etc/hotplug.d/openvpn/01-user \
 		$(1)/etc/hotplug.d/openvpn/01-user
@@ -150,4 +142,3 @@ endef
 
 $(eval $(call BuildPackage,openvpn-openssl))
 $(eval $(call BuildPackage,openvpn-mbedtls))
-$(eval $(call BuildPackage,openvpn-nossl))
diff --git a/package/network/services/openvpn/files/etc/etc/hotplug.d/openvpn/01-user b/package/network/services/openvpn/files/etc/etc/hotplug.d/openvpn/01-user
new file mode 100644
index 000000000..f93823e5c
--- /dev/null
+++ b/package/network/services/openvpn/files/etc/etc/hotplug.d/openvpn/01-user
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+. /lib/functions/openvpn.sh
+
+[ -e "/etc/openvpn.user" ] && {
+	env -i ACTION="$ACTION" INSTANCE="$INSTANCE" \
+		/bin/sh \
+		/etc/openvpn.user \
+		$*
+}
+
+# Wrap user defined scripts on up/down events
+case "$ACTION" in
+	up|down)
+		if get_openvpn_option "$config" command "$ACTION"; then
+			shift
+			exec /bin/sh -c "$command $*"
+		fi
+	;;
+esac
+
+exit 0
diff --git a/package/network/services/openvpn/files/etc/etc/openvpn.user b/package/network/services/openvpn/files/etc/etc/openvpn.user
new file mode 100644
index 000000000..a77566556
--- /dev/null
+++ b/package/network/services/openvpn/files/etc/etc/openvpn.user
@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# This file is interpreted as shell script.
+# Put your custom openvpn action here, they will
+# be executed with each opevnp event.
+#
+# $ACTION
+#      <down>    down action is generated after the TUN/TAP device is closed
+#      <up>      up action is generated after the TUN/TAP device is opened
+# $INSTANCE  Name of the openvpn instance which went up or down
+
diff --git a/package/network/services/openvpn/files/etc/hotplug.d/openvpn/01-user b/package/network/services/openvpn/files/etc/hotplug.d/openvpn/01-user
index 6d45f0b7c..f93823e5c 100644
--- a/package/network/services/openvpn/files/etc/hotplug.d/openvpn/01-user
+++ b/package/network/services/openvpn/files/etc/hotplug.d/openvpn/01-user
@@ -1,17 +1,6 @@
 #!/bin/sh
 
-get_option() {
-	local variable="$1"
-	local option="$2"
-
-	local value="$(sed -rne 's/^[ \t]*'"$option"'[ \t]+(([^ \t\\]|\\.)+)[ \t]*$/\1/p' "$config" | tail -n1 | sed -re 's/\\(.)/\1/g')"
-	[ -n "$value" ] || value="$(sed -rne 's/^[ \t]*'"$option"'[ \t]+'"'([^']+)'"'[ \t]*$/\1/p' "$config" | tail -n1)"
-	[ -n "$value" ] || value="$(sed -rne 's/^[ \t]*'"$option"'[ \t]+"(([^"\\]|\\.)+)"[ \t]*$/\1/p' "$config" | tail -n1 | sed -re 's/\\(.)/\1/g')"
-	[ -n "$value" ] || return 1
-
-	export -n "$variable=$value"
-	return 0
-}
+. /lib/functions/openvpn.sh
 
 [ -e "/etc/openvpn.user" ] && {
 	env -i ACTION="$ACTION" INSTANCE="$INSTANCE" \
@@ -23,8 +12,9 @@ get_option() {
 # Wrap user defined scripts on up/down events
 case "$ACTION" in
 	up|down)
-		if get_option command "$ACTION"; then
-			exec /bin/sh -c "$command $ACTION $INSTANCE $*"
+		if get_openvpn_option "$config" command "$ACTION"; then
+			shift
+			exec /bin/sh -c "$command $*"
 		fi
 	;;
 esac
diff --git a/package/network/services/openvpn/files/files/etc/hotplug.d/openvpn/01-user b/package/network/services/openvpn/files/files/etc/hotplug.d/openvpn/01-user
new file mode 100644
index 000000000..f93823e5c
--- /dev/null
+++ b/package/network/services/openvpn/files/files/etc/hotplug.d/openvpn/01-user
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+. /lib/functions/openvpn.sh
+
+[ -e "/etc/openvpn.user" ] && {
+	env -i ACTION="$ACTION" INSTANCE="$INSTANCE" \
+		/bin/sh \
+		/etc/openvpn.user \
+		$*
+}
+
+# Wrap user defined scripts on up/down events
+case "$ACTION" in
+	up|down)
+		if get_openvpn_option "$config" command "$ACTION"; then
+			shift
+			exec /bin/sh -c "$command $*"
+		fi
+	;;
+esac
+
+exit 0
diff --git a/package/network/services/openvpn/files/files/etc/openvpn.user b/package/network/services/openvpn/files/files/etc/openvpn.user
new file mode 100644
index 000000000..a77566556
--- /dev/null
+++ b/package/network/services/openvpn/files/files/etc/openvpn.user
@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# This file is interpreted as shell script.
+# Put your custom openvpn action here, they will
+# be executed with each opevnp event.
+#
+# $ACTION
+#      <down>    down action is generated after the TUN/TAP device is closed
+#      <up>      up action is generated after the TUN/TAP device is opened
+# $INSTANCE  Name of the openvpn instance which went up or down
+
diff --git a/package/network/services/openvpn/files/files/lib/functions/openvpn.sh b/package/network/services/openvpn/files/files/lib/functions/openvpn.sh
new file mode 100644
index 000000000..83fb1bb45
--- /dev/null
+++ b/package/network/services/openvpn/files/files/lib/functions/openvpn.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+get_openvpn_option() {
+	local config="$1"
+	local variable="$2"
+	local option="$3"
+
+	local value="$(sed -rne 's/^[ \t]*'"$option"'[ \t]+(([^ \t\\]|\\.)+)[ \t]*$/\1/p' "$config" | tail -n1 | sed -re 's/\\(.)/\1/g')"
+	[ -n "$value" ] || value="$(sed -rne 's/^[ \t]*'"$option"'[ \t]+'"'([^']+)'"'[ \t]*$/\1/p' "$config" | tail -n1)"
+	[ -n "$value" ] || value="$(sed -rne 's/^[ \t]*'"$option"'[ \t]+"(([^"\\]|\\.)+)"[ \t]*$/\1/p' "$config" | tail -n1 | sed -re 's/\\(.)/\1/g')"
+	[ -n "$value" ] || return 1
+
+	export -n "$variable=$value"
+	return 0
+}
+
diff --git a/package/network/services/openvpn/files/files/openvpn.config b/package/network/services/openvpn/files/files/openvpn.config
new file mode 100644
index 000000000..09d504da2
--- /dev/null
+++ b/package/network/services/openvpn/files/files/openvpn.config
@@ -0,0 +1,493 @@
+package openvpn
+
+#################################################
+# Sample to include a custom config file.       #
+#################################################
+
+config openvpn custom_config
+
+	# Set to 1 to enable this instance:
+	option enabled 0
+
+	# Include OpenVPN configuration
+	option config /etc/openvpn/my-vpn.conf
+
+
+#################################################
+# Sample OpenVPN 2.0 uci config for             #
+# multi-client server.                          #
+#################################################
+
+config openvpn sample_server
+
+	# Set to 1 to enable this instance:
+	option enabled 0
+
+	# Which local IP address should OpenVPN
+	# listen on? (optional)
+#	option local 0.0.0.0
+
+	# Which TCP/UDP port should OpenVPN listen on?
+	# If you want to run multiple OpenVPN instances
+	# on the same machine, use a different port
+	# number for each one.  You will need to
+	# open up this port on your firewall.
+	option port 1194
+
+	# TCP or UDP server?
+#	option proto tcp
+	option proto udp
+
+	# "dev tun" will create a routed IP tunnel,
+	# "dev tap" will create an ethernet tunnel.
+	# Use "dev tap0" if you are ethernet bridging
+	# and have precreated a tap0 virtual interface
+	# and bridged it with your ethernet interface.
+	# If you want to control access policies
+	# over the VPN, you must create firewall
+	# rules for the the TUN/TAP interface.
+	# On non-Windows systems, you can give
+	# an explicit unit number, such as tun0.
+	# On Windows, use "dev-node" for this.
+	# On most systems, the VPN will not function
+	# unless you partially or fully disable
+	# the firewall for the TUN/TAP interface.
+#	option dev tap
+	option dev tun
+
+	# SSL/TLS root certificate (ca), certificate
+	# (cert), and private key (key).  Each client
+	# and the server must have their own cert and
+	# key file.  The server and all clients will
+	# use the same ca file.
+	#
+	# See the "easy-rsa" directory for a series
+	# of scripts for generating RSA certificates
+	# and private keys.  Remember to use
+	# a unique Common Name for the server
+	# and each of the client certificates.
+	#
+	# Any X509 key management system can be used.
+	# OpenVPN can also use a PKCS #12 formatted key file
+	# (see "pkcs12" directive in man page).
+	option ca /etc/openvpn/ca.crt
+	option cert /etc/openvpn/server.crt
+	# This file should be kept secret:
+	option key /etc/openvpn/server.key
+
+	# Diffie hellman parameters.
+	# Generate your own with:
+	#   openssl dhparam -out dh2048.pem 2048
+	# Substitute 2048 for 1024 if you are using
+	# 1024 bit keys.
+	option dh /etc/openvpn/dh2048.pem
+
+	# Configure server mode and supply a VPN subnet
+	# for OpenVPN to draw client addresses from.
+	# The server will take 10.8.0.1 for itself,
+	# the rest will be made available to clients.
+	# Each client will be able to reach the server
+	# on 10.8.0.1. Comment this line out if you are
+	# ethernet bridging. See the man page for more info.
+	option server "10.8.0.0 255.255.255.0"
+
+	# Maintain a record of client <-> virtual IP address
+	# associations in this file.  If OpenVPN goes down or
+	# is restarted, reconnecting clients can be assigned
+	# the same virtual IP address from the pool that was
+	# previously assigned.
+	option ifconfig_pool_persist /tmp/ipp.txt
+
+	# Configure server mode for ethernet bridging.
+	# You must first use your OS's bridging capability
+	# to bridge the TAP interface with the ethernet
+	# NIC interface.  Then you must manually set the
+	# IP/netmask on the bridge interface, here we
+	# assume 10.8.0.4/255.255.255.0.  Finally we
+	# must set aside an IP range in this subnet
+	# (start=10.8.0.50 end=10.8.0.100) to allocate
+	# to connecting clients.  Leave this line commented
+	# out unless you are ethernet bridging.
+#	option server_bridge "10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100"
+
+	# Push routes to the client to allow it
+	# to reach other private subnets behind
+	# the server.  Remember that these
+	# private subnets will also need
+	# to know to route the OpenVPN client
+	# address pool (10.8.0.0/255.255.255.0)
+	# back to the OpenVPN server.
+#	list push "route 192.168.10.0 255.255.255.0"
+#	list push "route 192.168.20.0 255.255.255.0"
+
+	# To assign specific IP addresses to specific
+	# clients or if a connecting client has a private
+	# subnet behind it that should also have VPN access,
+	# use the subdirectory "ccd" for client-specific
+	# configuration files (see man page for more info).
+
+	# EXAMPLE: Suppose the client
+	# having the certificate common name "Thelonious"
+	# also has a small subnet behind his connecting
+	# machine, such as 192.168.40.128/255.255.255.248.
+	# First, uncomment out these lines:
+#	option client_config_dir /etc/openvpn/ccd
+#	list route "192.168.40.128 255.255.255.248"
+	# Then create a file ccd/Thelonious with this line:
+	#   iroute 192.168.40.128 255.255.255.248
+	# This will allow Thelonious' private subnet to
+	# access the VPN.  This example will only work
+	# if you are routing, not bridging, i.e. you are
+	# using "dev tun" and "server" directives.
+
+	# EXAMPLE: Suppose you want to give
+	# Thelonious a fixed VPN IP address of 10.9.0.1.
+	# First uncomment out these lines:
+#	option client_config_dir /etc/openvpn/ccd
+#	list route "10.9.0.0 255.255.255.252"
+#	list route "192.168.100.0 255.255.255.0"
+	# Then add this line to ccd/Thelonious:
+	#   ifconfig-push "10.9.0.1 10.9.0.2"
+
+	# Suppose that you want to enable different
+	# firewall access policies for different groups
+	# of clients.  There are two methods:
+	# (1) Run multiple OpenVPN daemons, one for each
+	#     group, and firewall the TUN/TAP interface
+	#     for each group/daemon appropriately.
+	# (2) (Advanced) Create a script to dynamically
+	#     modify the firewall in response to access
+	#     from different clients.  See man
+	#     page for more info on learn-address script.
+#	option learn_address /etc/openvpn/script
+
+	# If enabled, this directive will configure
+	# all clients to redirect their default
+	# network gateway through the VPN, causing
+	# all IP traffic such as web browsing and
+	# and DNS lookups to go through the VPN
+	# (The OpenVPN server machine may need to NAT
+	# the TUN/TAP interface to the internet in
+	# order for this to work properly).
+	# CAVEAT: May break client's network config if
+	# client's local DHCP server packets get routed
+	# through the tunnel.  Solution: make sure
+	# client's local DHCP server is reachable via
+	# a more specific route than the default route
+	# of 0.0.0.0/0.0.0.0.
+#	list push "redirect-gateway"
+
+	# Certain Windows-specific network settings
+	# can be pushed to clients, such as DNS
+	# or WINS server addresses.  CAVEAT:
+	# http://openvpn.net/faq.html#dhcpcaveats
+#	list push "dhcp-option DNS 10.8.0.1"
+#	list push "dhcp-option WINS 10.8.0.1"
+
+	# Uncomment this directive to allow different
+	# clients to be able to "see" each other.
+	# By default, clients will only see the server.
+	# To force clients to only see the server, you
+	# will also need to appropriately firewall the
+	# server's TUN/TAP interface.
+#	option client_to_client 1
+
+	# Uncomment this directive if multiple clients
+	# might connect with the same certificate/key
+	# files or common names.  This is recommended
+	# only for testing purposes.  For production use,
+	# each client should have its own certificate/key
+	# pair.
+	#
+	# IF YOU HAVE NOT GENERATED INDIVIDUAL
+	# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
+	# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
+	# UNCOMMENT THIS LINE OUT.
+#	option duplicate_cn 1
+
+	# The keepalive directive causes ping-like
+	# messages to be sent back and forth over
+	# the link so that each side knows when
+	# the other side has gone down.
+	# Ping every 10 seconds, assume that remote
+	# peer is down if no ping received during
+	# a 120 second time period.
+	option keepalive "10 120"
+
+	# For extra security beyond that provided
+	# by SSL/TLS, create an "HMAC firewall"
+	# to help block DoS attacks and UDP port flooding.
+	#
+	# Generate with:
+	#   openvpn --genkey --secret ta.key
+	#
+	# The server and each client must have
+	# a copy of this key.
+	# The second parameter should be '0'
+	# on the server and '1' on the clients.
+	# This file is secret:
+#	option tls_auth "/etc/openvpn/ta.key 0"
+
+	# For additional privacy, a shared secret key
+	# can be used for both authentication (as in tls_auth)
+	# and encryption of the TLS control channel.
+	#
+	# Generate a shared secret with:
+	# openvpn --genkey --secret ta.key
+	#
+	# The server and each client must have
+	# a copy of this key.
+	#
+	# tls_auth and tls_crypt should NOT
+	# be combined, as tls_crypt implies tls_auth.
+	# Use EITHER tls_crypt, tls_auth, or neither option.
+#	option tls_crypt "/etc/openvpn/ta.key"
+
+	# Set the minimum required TLS protocol version
+	# for all connections.
+	#
+	# Require at least TLS 1.1
+#	option tls_version_min "1.1"
+	# Require at least TLS 1.2
+#	option tls_version_min "1.2"
+	# Require TLS 1.2, or the highest version supported
+	# on the system
+#	option tls_version_min "1.2 'or-highest'"
+
+	# List the preferred ciphers to use for the data channel.
+	# Run openvpn --show-ciphers to see all supported ciphers.
+#	list data_ciphers 'AES-256-GCM'
+#	list data_ciphers 'AES-128-GCM'
+#	list data_ciphers 'CHACHA20-POLY1305'
+
+	# Set a fallback cipher in order to be compatible with
+	# peers that do not support cipher negotiation.
+	#
+	# Use AES-256-CBC as fallback
+#	option data_ciphers_fallback 'AES-128-CBC'
+	# Use AES-128-CBC as fallback
+#	option data_ciphers_fallback 'AES-256-CBC'
+	# Use Triple-DES as fallback
+#	option data_ciphers_fallback 'DES-EDE3-CBC'
+	# Use BF-CBC as fallback
+#	option data_ciphers_fallback 'BF-CBC'
+
+	# OpenVPN versions 2.4 and later will attempt to
+	# automatically negotiate the most secure cipher
+	# between the client and server, regardless of a
+	# configured "option cipher" (see below).
+	# Automatic negotiation is recommended.
+	#
+	# Uncomment this option to disable this behavior,
+	# and force all OpenVPN peers to use the configured
+	# cipher option instead (not recommended).
+#	option ncp_disable
+
+	# Enable compression on the VPN link.
+	# If you enable it here, you must also
+	# enable it in the client config file.
+	#
+	# Compression is not recommended, as compression and
+	# encryption in combination can weaken the security
+	# of the connection.
+	#
+	# LZ4 requires OpenVPN 2.4+ client and server
+#	option compress lz4
+	
+	# Control how OpenVPN handles peers using compression
+	#
+	# Do not allow any connections using compression
+#	option allow_compression 'no'
+	# Allow incoming compressed packets, but do not send compressed packets to other peers
+	# This can be useful when migrating old configurations with compression activated
+#	option allow_compression 'asym'
+	# Both incoming and outgoing packets may be compressed
+#	option allow_compression 'yes'
+
+	# The maximum number of concurrently connected
+	# clients we want to allow.
+#	option max_clients 100
+
+	# The persist options will try to avoid
+	# accessing certain resources on restart
+	# that may no longer be accessible because
+	# of the privilege downgrade.
+	option persist_key 1
+	option persist_tun 1
+	option user nobody
+
+	# Output a short status file showing
+	# current connections, truncated
+	# and rewritten every minute.
+	option status /tmp/openvpn-status.log
+
+	# By default, log messages will go to the syslog (or
+	# on Windows, if running as a service, they will go to
+	# the "\Program Files\OpenVPN\log" directory).
+	# Use log or log-append to override this default.
+	# "log" will truncate the log file on OpenVPN startup,
+	# while "log-append" will append to it.  Use one
+	# or the other (but not both).
+#	option log         /tmp/openvpn.log
+#	option log_append  /tmp/openvpn.log
+
+	# Set the appropriate level of log
+	# file verbosity.
+	#
+	# 0 is silent, except for fatal errors
+	# 4 is reasonable for general usage
+	# 5 and 6 can help to debug connection problems
+	# 9 is extremely verbose
+	option verb 3
+
+	# Silence repeating messages.  At most 20
+	# sequential messages of the same message
+	# category will be output to the log.
+#	option mute 20
+
+
+##############################################
+# Sample client-side OpenVPN 2.0 uci config  #
+# for connecting to multi-client server.     #
+##############################################
+
+config openvpn sample_client
+
+	# Set to 1 to enable this instance:
+	option enabled 0
+
+	# Specify that we are a client and that we
+	# will be pulling certain config file directives
+	# from the server.
+	option client 1
+
+	# Use the same setting as you are using on
+	# the server.
+	# On most systems, the VPN will not function
+	# unless you partially or fully disable
+	# the firewall for the TUN/TAP interface.
+#	option dev tap
+	option dev tun
+
+	# Are we connecting to a TCP or
+	# UDP server?  Use the same setting as
+	# on the server.
+#	option proto tcp
+	option proto udp
+
+	# The hostname/IP and port of the server.
+	# You can have multiple remote entries
+	# to load balance between the servers.
+	list remote "my_server_1 1194"
+#	list remote "my_server_2 1194"
+
+	# Choose a random host from the remote
+	# list for load_balancing.  Otherwise
+	# try hosts in the order specified.
+#	option remote_random 1
+
+	# Keep trying indefinitely to resolve the
+	# host name of the OpenVPN server.  Very useful
+	# on machines which are not permanently connected
+	# to the internet such as laptops.
+	option resolv_retry infinite
+
+	# Most clients don't need to bind to
+	# a specific local port number.
+	option nobind 1
+
+	# Try to preserve some state across restarts.
+	option persist_key 1
+	option persist_tun 1
+	option user nobody
+
+	# If you are connecting through an
+	# HTTP proxy to reach the actual OpenVPN
+	# server, put the proxy server/IP and
+	# port number here.  See the man page
+	# if your proxy server requires
+	# authentication.
+	# retry on connection failures:
+#	option http_proxy_retry 1
+	# specify http proxy address and port:
+#	option http_proxy "192.168.1.100 8080"
+
+	# Wireless networks often produce a lot
+	# of duplicate packets.  Set this flag
+	# to silence duplicate packet warnings.
+#	option mute_replay_warnings 1
+
+	# SSL/TLS parms.
+	# See the server config file for more
+	# description.  It's best to use
+	# a separate .crt/.key file pair
+	# for each client.  A single ca
+	# file can be used for all clients.
+	option ca /etc/openvpn/ca.crt
+	option cert /etc/openvpn/client.crt
+	option key /etc/openvpn/client.key
+
+	# Verify server certificate by checking
+	# that the certicate has the key usage
+	# field set to "server".  This is an
+	# important precaution to protect against
+	# a potential attack discussed here:
+	#  http://openvpn.net/howto.html#mitm
+	#
+	# To use this feature, you will need to generate
+	# your server certificates with the nsCertType
+	# field set to "server".  The build_key_server
+	# script in the easy_rsa folder will do this.
+#	option remote_cert_tls server
+
+	# If a tls_auth key is used on the server
+	# then every client must also have the key.
+#	option tls_auth "/etc/openvpn/ta.key 1"
+
+	# If a tls_crypt key is used on the server
+	# every client must also have the key.
+#	option tls_crypt "/etc/openvpn/ta.key"
+
+	# Set the minimum required TLS protocol version
+	# for all connections.
+	#
+	# Require at least TLS 1.1
+#	option tls_version_min "1.1"
+	# Require at least TLS 1.2
+#	option tls_version_min "1.2"
+	# Require TLS 1.2, or the highest version supported
+	# on the system
+#	option tls_version_min "1.2 'or-highest'"
+
+	# List the preferred ciphers for the data channel.
+#	list data_ciphers 'AES-256-GCM'
+#	list data_ciphers 'AES-128-GCM'
+#	list data_ciphers 'CHACHA20-POLY1305'
+
+	# Set a fallback cipher if you connect to a peer that does
+	# not support cipher negotiation.
+	# Use AES-256-CBC as fallback
+#	option data_ciphers_fallback 'AES-128-CBC'
+	# Use AES-128-CBC as fallback
+#	option data_ciphers_fallback 'AES-256-CBC'
+	# Use Triple-DES as fallback
+#	option data_ciphers_fallback 'DES-EDE3-CBC'
+	# Use BF-CBC as fallback
+#	option data_ciphers_fallback 'BF-CBC'
+
+	# Enable compression on the VPN link.
+	# Don't enable this unless it is also
+	# enabled in the server config file.
+	#
+	# Compression is not recommended, as compression and
+	# encryption in combination can weaken the security
+	# of the connection.
+	#
+	# LZ4 requires OpenVPN 2.4+ on server and client
+#	option compress lz4
+
+	# Set log file verbosity.
+	option verb 3
+
+	# Silence repeating messages
+#	option mute 20
diff --git a/package/network/services/openvpn/files/files/openvpn.init b/package/network/services/openvpn/files/files/openvpn.init
new file mode 100644
index 000000000..487a2269e
--- /dev/null
+++ b/package/network/services/openvpn/files/files/openvpn.init
@@ -0,0 +1,209 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2008-2013 OpenWrt.org
+# Copyright (C) 2008 Jo-Philipp Wich
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+
+START=90
+STOP=10
+
+USE_PROCD=1
+PROG=/usr/sbin/openvpn
+
+LIST_SEP="
+"
+
+UCI_STARTED=
+UCI_DISABLED=
+
+append_param() {
+	local s="$1"
+	local v="$2"
+	case "$v" in
+		*_*_*_*) v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_} ;;
+		*_*_*)   v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_} ;;
+		*_*)     v=${v%%_*}-${v#*_} ;;
+	esac
+	echo -n "$v" >> "/var/etc/openvpn-$s.conf"
+	return 0
+}
+
+append_bools() {
+	local p; local v; local s="$1"; shift
+	for p in $*; do
+		config_get_bool v "$s" "$p"
+		[ "$v" = 1 ] && append_param "$s" "$p" && echo >> "/var/etc/openvpn-$s.conf"
+	done
+}
+
+append_params() {
+	local p; local v; local s="$1"; shift
+	for p in $*; do
+		config_get v "$s" "$p"
+		IFS="$LIST_SEP"
+		for v in $v; do
+			[ -n "$v" ] && [ "$p" != "push" ] && append_param "$s" "$p" && echo " $v" >> "/var/etc/openvpn-$s.conf"
+			[ -n "$v" ] && [ "$p" = "push" ] && append_param "$s" "$p" && echo " \"$v\"" >> "/var/etc/openvpn-$s.conf"
+		done
+		unset IFS
+	done
+}
+
+append_list() {
+	local p; local v; local s="$1"; shift
+
+	list_cb_append() {
+		v="${v}:$1"
+	}
+
+	for p in $*; do
+		unset v
+		config_list_foreach "$s" "$p" list_cb_append
+		[ -n "$v" ] && append_param "$s" "$p" && echo " ${v:1}" >> "/var/etc/openvpn-$s.conf"
+	done
+}
+
+section_enabled() {
+	config_get_bool enable  "$1" 'enable'  0
+	config_get_bool enabled "$1" 'enabled' 0
+	[ $enable -gt 0 ] || [ $enabled -gt 0 ]
+}
+
+openvpn_get_dev() {
+	local dev dev_type
+	local name="$1"
+	local conf="$2"
+
+	# Do override only for configurations with config_file
+	config_get config_file "$name" config
+	[ -n "$config_file" ] || return
+
+	# Check there is someething to override
+	config_get dev "$name" dev
+	config_get dev_type "$name" dev_type
+	[ -n "$dev" ] || return
+
+	# If there is a no dev_type, try to guess it
+	if [ -z "$dev_type" ]; then
+		. /lib/functions/openvpn.sh
+
+		local odev odev_type
+		get_openvpn_option "$conf" odev dev
+		get_openvpn_option "$conf" odev_type dev-type
+		[ -n "$odev_type" ] || odev_type="$odev"
+
+		case "$odev_type" in
+			tun*) dev_type="tun" ;;
+			tap*) dev_type="tap" ;;
+			*) return;;
+		esac
+	fi
+
+	# Return overrides
+	echo "--dev-type $dev_type --dev $dev"
+}
+
+openvpn_add_instance() {
+	local name="$1"
+	local dir="$2"
+	local conf="$3"
+	local security="$4"
+
+	procd_open_instance "$name"
+	procd_set_param command "$PROG"	\
+		--syslog "openvpn($name)" \
+		--status "/var/run/openvpn.$name.status" \
+		--cd "$dir" \
+		--config "$conf" \
+		--up "/usr/libexec/openvpn-hotplug up $name" \
+		--down "/usr/libexec/openvpn-hotplug down $name" \
+		--script-security "${security:-2}" \
+		$(openvpn_get_dev "$name" "$conf")
+	procd_set_param file "$dir/$conf"
+	procd_set_param term_timeout 15
+	procd_set_param respawn
+	procd_append_param respawn 3600
+	procd_append_param respawn 5
+	procd_append_param respawn -1
+	procd_close_instance
+}
+
+start_instance() {
+	local s="$1"
+
+	config_get config "$s" config
+	config="${config:+$(readlink -f "$config")}"
+
+	section_enabled "$s" || {
+		append UCI_DISABLED "$config" "$LIST_SEP"
+		return 1
+	}
+
+	local script_security
+	config_get script_security "$s" script_security
+
+	[ ! -d "/var/run" ] && mkdir -p "/var/run"
+
+	if [ ! -z "$config" ]; then
+		append UCI_STARTED "$config" "$LIST_SEP"
+		openvpn_add_instance "$s" "${config%/*}" "$config" "$script_security"
+		return
+	fi
+
+	[ ! -d "/var/etc" ] && mkdir -p "/var/etc"
+	[ -f "/var/etc/openvpn-$s.conf" ] && rm "/var/etc/openvpn-$s.conf"
+
+	append_bools "$s" $OPENVPN_BOOLS
+	append_params "$s" $OPENVPN_PARAMS
+	append_list "$s" $OPENVPN_LIST
+
+	openvpn_add_instance "$s" "/var/etc" "openvpn-$s.conf" "$script_security"
+}
+
+start_service() {
+	local instance="$1"
+	local instance_found=0
+
+	config_cb() {
+		local type="$1"
+		local name="$2"
+		if [ "$type" = "openvpn" ]; then
+			if [ -n "$instance" -a "$instance" = "$name" ]; then
+				instance_found=1
+			fi
+		fi
+	}
+
+	. /usr/share/openvpn/openvpn.options
+	config_load 'openvpn'
+
+	if [ -n "$instance" ]; then
+		[ "$instance_found" -gt 0 ] || return
+		start_instance "$instance"
+	else
+		config_foreach start_instance 'openvpn'
+
+		local path name
+		for path in /etc/openvpn/*.conf; do
+			if [ -f "$path" ]; then
+				name="${path##*/}"; name="${name%.conf}"
+
+				# don't start configs again that are already started by uci
+				if echo "$UCI_STARTED" | grep -qxF "$path"; then
+					continue
+
+				# don't start configs which are set to disabled in uci
+				elif echo "$UCI_DISABLED" | grep -qxF "$path"; then
+					logger -t openvpn "$name.conf is disabled in /etc/config/openvpn"
+					continue
+				fi
+
+				openvpn_add_instance "$name" "${path%/*}" "$path"
+			fi
+		done
+	fi
+}
+
+service_triggers() {
+	procd_add_reload_trigger openvpn
+}
diff --git a/package/network/services/openvpn/files/files/openvpn.options b/package/network/services/openvpn/files/files/openvpn.options
new file mode 100644
index 000000000..7c641f7d4
--- /dev/null
+++ b/package/network/services/openvpn/files/files/openvpn.options
@@ -0,0 +1,204 @@
+OPENVPN_PARAMS='
+allow_compression
+askpass
+auth
+auth_retry
+auth_user_pass
+auth_user_pass_verify
+bcast_buffers
+bind_dev
+ca
+capath
+cd
+cert
+chroot
+cipher
+client_config_dir
+client_connect
+client_disconnect
+comp_lzo
+compress
+connect_freq
+connect_retry
+connect_retry_max
+connect_timeout
+crl_verify
+data_ciphers_fallback
+dev
+dev_node
+dev_type
+dh
+ecdh_curve
+echo
+engine
+explicit_exit_notify
+extra_certs
+fragment
+group
+hand_window
+hash_size
+http_proxy
+http_proxy_option
+http_proxy_timeout
+ifconfig
+ifconfig_ipv6
+ifconfig_ipv6_pool
+ifconfig_ipv6_push
+ifconfig_pool
+ifconfig_pool_persist
+ifconfig_push
+inactive
+ipchange
+iroute
+iroute_ipv6
+keepalive
+key
+key_direction
+keysize
+learn_address
+link_mtu
+lladdr
+local
+log
+log_append
+lport
+management
+management_log_cache
+max_clients
+max_routes_per_client
+mode
+mssfix
+mtu_disc
+mute
+nice
+ping
+ping_exit
+ping_restart
+pkcs12
+plugin
+port
+port_share
+prng
+proto
+pull_filter
+push
+rcvbuf
+redirect_gateway
+remap_usr1
+remote
+remote_cert_eku
+remote_cert_ku
+remote_cert_tls
+reneg_bytes
+reneg_pkts
+reneg_sec
+replay_persist
+replay_window
+resolv_retry
+route
+route_delay
+route_gateway
+route_ipv6
+route_metric
+route_pre_down
+route_up
+rport
+secret
+server
+server_bridge
+server_ipv6
+setenv
+shaper
+sndbuf
+socks_proxy
+status
+status_version
+syslog
+tcp_queue_limit
+tls_auth
+tls_crypt
+tls_crypt_v2
+tls_crypt_v2_verify
+tls_export_cert
+tls_timeout
+tls_verify
+tls_version_min
+tmp_dir
+topology
+tran_window
+tun_mtu
+tun_mtu_extra
+txqueuelen
+user
+verb
+verify_client_cert
+verify_x509_name
+vlan_accept
+vlan_pvid
+x509_username_field
+'
+
+OPENVPN_BOOLS='
+allow_recursive_routing
+auth_nocache
+auth_user_pass_optional
+bind
+block_ipv6
+ccd_exclusive
+client
+client_to_client
+comp_noadapt
+disable
+disable_occ
+down_pre
+duplicate_cn
+fast_io
+float
+http_proxy_retry
+ifconfig_noexec
+ifconfig_nowarn
+management_forget_disconnect
+management_hold
+management_query_passwords
+management_signal
+mktun
+mlock
+mtu_test
+multihome
+mute_replay_warnings
+ncp_disable
+nobind
+opt_verify
+passtos
+persist_key
+persist_local_ip
+persist_remote_ip
+persist_tun
+ping_timer_rem
+pull
+push_reset
+remote_random
+rmtun
+route_noexec
+route_nopull
+single_session
+socks_proxy_retry
+suppress_timestamps
+tcp_nodelay
+test_crypto
+tls_client
+tls_exit
+tls_server
+up_delay
+up_restart
+username_as_common_name
+vlan_tagging
+'
+
+OPENVPN_LIST='
+data_ciphers
+ncp_ciphers
+tls_cipher
+tls_ciphersuites
+tls_groups
+'
diff --git a/package/network/services/openvpn/files/files/openvpn.upgrade b/package/network/services/openvpn/files/files/openvpn.upgrade
new file mode 100644
index 000000000..6ae49d22d
--- /dev/null
+++ b/package/network/services/openvpn/files/files/openvpn.upgrade
@@ -0,0 +1 @@
+/etc/openvpn/
diff --git a/package/network/services/openvpn/files/files/usr/libexec/openvpn-hotplug b/package/network/services/openvpn/files/files/usr/libexec/openvpn-hotplug
new file mode 100644
index 000000000..9235fbacf
--- /dev/null
+++ b/package/network/services/openvpn/files/files/usr/libexec/openvpn-hotplug
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+ACTION=$1
+shift
+INSTANCE=$1
+shift
+
+export ACTION=$ACTION
+export INSTANCE=$INSTANCE
+exec /sbin/hotplug-call openvpn "$@"
diff --git a/package/network/services/openvpn/files/lib/functions/openvpn.sh b/package/network/services/openvpn/files/lib/functions/openvpn.sh
new file mode 100644
index 000000000..83fb1bb45
--- /dev/null
+++ b/package/network/services/openvpn/files/lib/functions/openvpn.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+get_openvpn_option() {
+	local config="$1"
+	local variable="$2"
+	local option="$3"
+
+	local value="$(sed -rne 's/^[ \t]*'"$option"'[ \t]+(([^ \t\\]|\\.)+)[ \t]*$/\1/p' "$config" | tail -n1 | sed -re 's/\\(.)/\1/g')"
+	[ -n "$value" ] || value="$(sed -rne 's/^[ \t]*'"$option"'[ \t]+'"'([^']+)'"'[ \t]*$/\1/p' "$config" | tail -n1)"
+	[ -n "$value" ] || value="$(sed -rne 's/^[ \t]*'"$option"'[ \t]+"(([^"\\]|\\.)+)"[ \t]*$/\1/p' "$config" | tail -n1 | sed -re 's/\\(.)/\1/g')"
+	[ -n "$value" ] || return 1
+
+	export -n "$variable=$value"
+	return 0
+}
+
diff --git a/package/network/services/openvpn/files/openvpn.config b/package/network/services/openvpn/files/openvpn.config
index 1fd846f55..09d504da2 100644
--- a/package/network/services/openvpn/files/openvpn.config
+++ b/package/network/services/openvpn/files/openvpn.config
@@ -77,10 +77,10 @@ config openvpn sample_server
 
 	# Diffie hellman parameters.
 	# Generate your own with:
-	#   openssl dhparam -out dh1024.pem 1024
+	#   openssl dhparam -out dh2048.pem 2048
 	# Substitute 2048 for 1024 if you are using
-	# 2048 bit keys.
-	option dh /etc/openvpn/dh1024.pem
+	# 1024 bit keys.
+	option dh /etc/openvpn/dh2048.pem
 
 	# Configure server mode and supply a VPN subnet
 	# for OpenVPN to draw client addresses from.
@@ -228,24 +228,81 @@ config openvpn sample_server
 	# This file is secret:
 #	option tls_auth "/etc/openvpn/ta.key 0"
 
-	# Select a cryptographic cipher.
-	# This config item must be copied to
-	# the client config file as well.
-	# Blowfish (default):
-#	option cipher BF-CBC
-	# AES:
-#	option cipher AES-128-CBC
-	# Triple-DES:
-#	option cipher DES-EDE3-CBC
+	# For additional privacy, a shared secret key
+	# can be used for both authentication (as in tls_auth)
+	# and encryption of the TLS control channel.
+	#
+	# Generate a shared secret with:
+	# openvpn --genkey --secret ta.key
+	#
+	# The server and each client must have
+	# a copy of this key.
+	#
+	# tls_auth and tls_crypt should NOT
+	# be combined, as tls_crypt implies tls_auth.
+	# Use EITHER tls_crypt, tls_auth, or neither option.
+#	option tls_crypt "/etc/openvpn/ta.key"
+
+	# Set the minimum required TLS protocol version
+	# for all connections.
+	#
+	# Require at least TLS 1.1
+#	option tls_version_min "1.1"
+	# Require at least TLS 1.2
+#	option tls_version_min "1.2"
+	# Require TLS 1.2, or the highest version supported
+	# on the system
+#	option tls_version_min "1.2 'or-highest'"
+
+	# List the preferred ciphers to use for the data channel.
+	# Run openvpn --show-ciphers to see all supported ciphers.
+#	list data_ciphers 'AES-256-GCM'
+#	list data_ciphers 'AES-128-GCM'
+#	list data_ciphers 'CHACHA20-POLY1305'
+
+	# Set a fallback cipher in order to be compatible with
+	# peers that do not support cipher negotiation.
+	#
+	# Use AES-256-CBC as fallback
+#	option data_ciphers_fallback 'AES-128-CBC'
+	# Use AES-128-CBC as fallback
+#	option data_ciphers_fallback 'AES-256-CBC'
+	# Use Triple-DES as fallback
+#	option data_ciphers_fallback 'DES-EDE3-CBC'
+	# Use BF-CBC as fallback
+#	option data_ciphers_fallback 'BF-CBC'
+
+	# OpenVPN versions 2.4 and later will attempt to
+	# automatically negotiate the most secure cipher
+	# between the client and server, regardless of a
+	# configured "option cipher" (see below).
+	# Automatic negotiation is recommended.
+	#
+	# Uncomment this option to disable this behavior,
+	# and force all OpenVPN peers to use the configured
+	# cipher option instead (not recommended).
+#	option ncp_disable
 
 	# Enable compression on the VPN link.
 	# If you enable it here, you must also
 	# enable it in the client config file.
+	#
+	# Compression is not recommended, as compression and
+	# encryption in combination can weaken the security
+	# of the connection.
+	#
 	# LZ4 requires OpenVPN 2.4+ client and server
 #	option compress lz4
-	# LZO is compatible with most OpenVPN versions
-	# (set "compress lzo" on 2.4+ clients, and "comp-lzo yes" on older clients)
-	option compress lzo
+	
+	# Control how OpenVPN handles peers using compression
+	#
+	# Do not allow any connections using compression
+#	option allow_compression 'no'
+	# Allow incoming compressed packets, but do not send compressed packets to other peers
+	# This can be useful when migrating old configurations with compression activated
+#	option allow_compression 'asym'
+	# Both incoming and outgoing packets may be compressed
+#	option allow_compression 'yes'
 
 	# The maximum number of concurrently connected
 	# clients we want to allow.
@@ -371,7 +428,7 @@ config openvpn sample_client
 	option key /etc/openvpn/client.key
 
 	# Verify server certificate by checking
-	# that the certicate has the nsCertType
+	# that the certicate has the key usage
 	# field set to "server".  This is an
 	# important precaution to protect against
 	# a potential attack discussed here:
@@ -381,24 +438,53 @@ config openvpn sample_client
 	# your server certificates with the nsCertType
 	# field set to "server".  The build_key_server
 	# script in the easy_rsa folder will do this.
-#	option ns_cert_type server
+#	option remote_cert_tls server
 
 	# If a tls_auth key is used on the server
 	# then every client must also have the key.
 #	option tls_auth "/etc/openvpn/ta.key 1"
 
-	# Select a cryptographic cipher.
-	# If the cipher option is used on the server
-	# then you must also specify it here.
-#	option cipher x
+	# If a tls_crypt key is used on the server
+	# every client must also have the key.
+#	option tls_crypt "/etc/openvpn/ta.key"
+
+	# Set the minimum required TLS protocol version
+	# for all connections.
+	#
+	# Require at least TLS 1.1
+#	option tls_version_min "1.1"
+	# Require at least TLS 1.2
+#	option tls_version_min "1.2"
+	# Require TLS 1.2, or the highest version supported
+	# on the system
+#	option tls_version_min "1.2 'or-highest'"
+
+	# List the preferred ciphers for the data channel.
+#	list data_ciphers 'AES-256-GCM'
+#	list data_ciphers 'AES-128-GCM'
+#	list data_ciphers 'CHACHA20-POLY1305'
+
+	# Set a fallback cipher if you connect to a peer that does
+	# not support cipher negotiation.
+	# Use AES-256-CBC as fallback
+#	option data_ciphers_fallback 'AES-128-CBC'
+	# Use AES-128-CBC as fallback
+#	option data_ciphers_fallback 'AES-256-CBC'
+	# Use Triple-DES as fallback
+#	option data_ciphers_fallback 'DES-EDE3-CBC'
+	# Use BF-CBC as fallback
+#	option data_ciphers_fallback 'BF-CBC'
 
 	# Enable compression on the VPN link.
 	# Don't enable this unless it is also
 	# enabled in the server config file.
+	#
+	# Compression is not recommended, as compression and
+	# encryption in combination can weaken the security
+	# of the connection.
+	#
 	# LZ4 requires OpenVPN 2.4+ on server and client
 #	option compress lz4
-	# LZO is compatible with most OpenVPN versions
-	option compress lzo
 
 	# Set log file verbosity.
 	option verb 3
diff --git a/package/network/services/openvpn/files/openvpn.init b/package/network/services/openvpn/files/openvpn.init
index a560b89ff..487a2269e 100644
--- a/package/network/services/openvpn/files/openvpn.init
+++ b/package/network/services/openvpn/files/openvpn.init
@@ -43,7 +43,7 @@ append_params() {
 		IFS="$LIST_SEP"
 		for v in $v; do
 			[ -n "$v" ] && [ "$p" != "push" ] && append_param "$s" "$p" && echo " $v" >> "/var/etc/openvpn-$s.conf"
-			[ -n "$v" ] && [ "$p" == "push" ] && append_param "$s" "$p" && echo " \"$v\"" >> "/var/etc/openvpn-$s.conf"
+			[ -n "$v" ] && [ "$p" = "push" ] && append_param "$s" "$p" && echo " \"$v\"" >> "/var/etc/openvpn-$s.conf"
 		done
 		unset IFS
 	done
@@ -69,6 +69,40 @@ section_enabled() {
 	[ $enable -gt 0 ] || [ $enabled -gt 0 ]
 }
 
+openvpn_get_dev() {
+	local dev dev_type
+	local name="$1"
+	local conf="$2"
+
+	# Do override only for configurations with config_file
+	config_get config_file "$name" config
+	[ -n "$config_file" ] || return
+
+	# Check there is someething to override
+	config_get dev "$name" dev
+	config_get dev_type "$name" dev_type
+	[ -n "$dev" ] || return
+
+	# If there is a no dev_type, try to guess it
+	if [ -z "$dev_type" ]; then
+		. /lib/functions/openvpn.sh
+
+		local odev odev_type
+		get_openvpn_option "$conf" odev dev
+		get_openvpn_option "$conf" odev_type dev-type
+		[ -n "$odev_type" ] || odev_type="$odev"
+
+		case "$odev_type" in
+			tun*) dev_type="tun" ;;
+			tap*) dev_type="tap" ;;
+			*) return;;
+		esac
+	fi
+
+	# Return overrides
+	echo "--dev-type $dev_type --dev $dev"
+}
+
 openvpn_add_instance() {
 	local name="$1"
 	local dir="$2"
@@ -83,7 +117,8 @@ openvpn_add_instance() {
 		--config "$conf" \
 		--up "/usr/libexec/openvpn-hotplug up $name" \
 		--down "/usr/libexec/openvpn-hotplug down $name" \
-		--script-security "${security:-2}"
+		--script-security "${security:-2}" \
+		$(openvpn_get_dev "$name" "$conf")
 	procd_set_param file "$dir/$conf"
 	procd_set_param term_timeout 15
 	procd_set_param respawn
diff --git a/package/network/services/openvpn/files/openvpn.options b/package/network/services/openvpn/files/openvpn.options
index 5d7a387cd..7c641f7d4 100644
--- a/package/network/services/openvpn/files/openvpn.options
+++ b/package/network/services/openvpn/files/openvpn.options
@@ -1,10 +1,12 @@
 OPENVPN_PARAMS='
+allow_compression
 askpass
 auth
 auth_retry
 auth_user_pass
 auth_user_pass_verify
 bcast_buffers
+bind_dev
 ca
 capath
 cd
@@ -21,6 +23,7 @@ connect_retry
 connect_retry_max
 connect_timeout
 crl_verify
+data_ciphers_fallback
 dev
 dev_node
 dev_type
@@ -51,7 +54,6 @@ iroute_ipv6
 keepalive
 key
 key_direction
-key_method
 keysize
 learn_address
 link_mtu
@@ -69,7 +71,6 @@ mssfix
 mtu_disc
 mute
 nice
-ns_cert_type
 ping
 ping_exit
 ping_restart
@@ -116,6 +117,9 @@ syslog
 tcp_queue_limit
 tls_auth
 tls_crypt
+tls_crypt_v2
+tls_crypt_v2_verify
+tls_export_cert
 tls_timeout
 tls_verify
 tls_version_min
@@ -129,6 +133,8 @@ user
 verb
 verify_client_cert
 verify_x509_name
+vlan_accept
+vlan_pvid
 x509_username_field
 '
 
@@ -137,6 +143,7 @@ allow_recursive_routing
 auth_nocache
 auth_user_pass_optional
 bind
+block_ipv6
 ccd_exclusive
 client
 client_to_client
@@ -185,10 +192,13 @@ tls_server
 up_delay
 up_restart
 username_as_common_name
+vlan_tagging
 '
 
 OPENVPN_LIST='
+data_ciphers
 ncp_ciphers
 tls_cipher
 tls_ciphersuites
+tls_groups
 '
diff --git a/package/network/services/openvpn/patches/001-reproducible-remove_DATE.patch b/package/network/services/openvpn/patches/001-reproducible-remove_DATE.patch
index 101fa12ba..e4e6d3941 100644
--- a/package/network/services/openvpn/patches/001-reproducible-remove_DATE.patch
+++ b/package/network/services/openvpn/patches/001-reproducible-remove_DATE.patch
@@ -1,9 +1,9 @@
 --- a/src/openvpn/options.c
 +++ b/src/openvpn/options.c
-@@ -106,7 +106,6 @@ const char title_string[] =
- #ifdef HAVE_AEAD_CIPHER_MODES
-     " [AEAD]"
+@@ -105,7 +105,6 @@ const char title_string[] =
  #endif
+ #endif
+     " [AEAD]"
 -    " built on " __DATE__
  ;
  
diff --git a/package/network/services/openvpn/patches/100-mbedtls-disable-runtime-version-check.patch b/package/network/services/openvpn/patches/100-mbedtls-disable-runtime-version-check.patch
index cb16a906f..4141c2863 100644
--- a/package/network/services/openvpn/patches/100-mbedtls-disable-runtime-version-check.patch
+++ b/package/network/services/openvpn/patches/100-mbedtls-disable-runtime-version-check.patch
@@ -1,6 +1,6 @@
 --- a/src/openvpn/ssl_mbedtls.c
 +++ b/src/openvpn/ssl_mbedtls.c
-@@ -1415,7 +1415,7 @@ const char *
+@@ -1520,7 +1520,7 @@ const char *
  get_ssl_library_version(void)
  {
      static char mbedtls_version[30];
diff --git a/package/network/services/openvpn/patches/110-openssl-dont-use-deprecated-ssleay-symbols.patch b/package/network/services/openvpn/patches/110-openssl-dont-use-deprecated-ssleay-symbols.patch
deleted file mode 100644
index c7faf7c0c..000000000
--- a/package/network/services/openvpn/patches/110-openssl-dont-use-deprecated-ssleay-symbols.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 17a476fd5c8cc49f1d103a50199e87ede76b1b67 Mon Sep 17 00:00:00 2001
-From: Steffan Karger <steffan@karger.me>
-Date: Sun, 26 Nov 2017 16:04:00 +0100
-Subject: [PATCH] openssl: don't use deprecated SSLEAY/SSLeay symbols
-
-Compiling our current master against OpenSSL 1.1 with
--DOPENSSL_API_COMPAT=0x10100000L screams bloody murder.  This patch fixes
-the errors about the deprecated SSLEAY/SSLeay symbols and defines.
-
-Signed-off-by: Steffan Karger <steffan@karger.me>
-Acked-by: Gert Doering <gert@greenie.muc.de>
-Message-Id: <20171126150401.28565-1-steffan@karger.me>
-URL: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg15934.html
-Signed-off-by: Gert Doering <gert@greenie.muc.de>
----
- configure.ac                 | 1 +
- src/openvpn/openssl_compat.h | 8 ++++++++
- src/openvpn/ssl_openssl.c    | 2 +-
- 3 files changed, 10 insertions(+), 1 deletion(-)
-
---- a/configure.ac
-+++ b/configure.ac
-@@ -904,6 +904,7 @@ if test "${enable_crypto}" = "yes" -a "$
- 			EVP_MD_CTX_free \
- 			EVP_MD_CTX_reset \
- 			EVP_CIPHER_CTX_reset \
-+			OpenSSL_version \
- 			SSL_CTX_get_default_passwd_cb \
- 			SSL_CTX_get_default_passwd_cb_userdata \
- 			SSL_CTX_set_security_level \
---- a/src/openvpn/openssl_compat.h
-+++ b/src/openvpn/openssl_compat.h
-@@ -689,6 +689,14 @@ EC_GROUP_order_bits(const EC_GROUP *grou
- #endif
- 
- /* SSLeay symbols have been renamed in OpenSSL 1.1 */
-+#ifndef OPENSSL_VERSION
-+#define OPENSSL_VERSION SSLEAY_VERSION
-+#endif
-+
-+#ifndef HAVE_OPENSSL_VERSION
-+#define OpenSSL_version SSLeay_version
-+#endif
-+
- #if !defined(RSA_F_RSA_OSSL_PRIVATE_ENCRYPT)
- #define RSA_F_RSA_OSSL_PRIVATE_ENCRYPT       RSA_F_RSA_EAY_PRIVATE_ENCRYPT
- #endif
---- a/src/openvpn/ssl_openssl.c
-+++ b/src/openvpn/ssl_openssl.c
-@@ -2008,7 +2008,7 @@ get_highest_preference_tls_cipher(char *
- const char *
- get_ssl_library_version(void)
- {
--    return SSLeay_version(SSLEAY_VERSION);
-+    return OpenSSL_version(OPENSSL_VERSION);
- }
- 
- #endif /* defined(ENABLE_CRYPTO) && defined(ENABLE_CRYPTO_OPENSSL) */
diff --git a/package/network/services/openvpn/patches/111-openssl-add-missing-include-statements.patch b/package/network/services/openvpn/patches/111-openssl-add-missing-include-statements.patch
deleted file mode 100644
index 6a62b1650..000000000
--- a/package/network/services/openvpn/patches/111-openssl-add-missing-include-statements.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 1987498271abadf042d8bb3feee1fe0d877a9d55 Mon Sep 17 00:00:00 2001
-From: Steffan Karger <steffan@karger.me>
-Date: Sun, 26 Nov 2017 16:49:12 +0100
-Subject: [PATCH] openssl: add missing #include statements
-
-Compiling our current master against OpenSSL 1.1 with
--DOPENSSL_API_COMPAT=0x10100000L screams bloody murder.  This patch fixes
-the errors caused by missing includes.  Previous openssl versions would
-usually include 'the rest of the world', but they're fixing that.  So we
-should no longer rely on it.
-
-(And sneaking in alphabetic ordering of the includes while touching them.)
-
-Signed-off-by: Steffan Karger <steffan@karger.me>
-Acked-by: Gert Doering <gert@greenie.muc.de>
-Message-Id: <20171126154912.13283-1-steffan@karger.me>
-URL: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg15936.html
-Signed-off-by: Gert Doering <gert@greenie.muc.de>
----
- src/openvpn/openssl_compat.h     | 1 +
- src/openvpn/ssl_openssl.c        | 6 +++++-
- src/openvpn/ssl_verify_openssl.c | 3 ++-
- 3 files changed, 8 insertions(+), 2 deletions(-)
-
---- a/src/openvpn/openssl_compat.h
-+++ b/src/openvpn/openssl_compat.h
-@@ -42,6 +42,7 @@
- 
- #include "buffer.h"
- 
-+#include <openssl/rsa.h>
- #include <openssl/ssl.h>
- #include <openssl/x509.h>
- 
---- a/src/openvpn/ssl_openssl.c
-+++ b/src/openvpn/ssl_openssl.c
-@@ -52,10 +52,14 @@
- 
- #include "ssl_verify_openssl.h"
- 
-+#include <openssl/bn.h>
-+#include <openssl/crypto.h>
-+#include <openssl/dh.h>
-+#include <openssl/dsa.h>
- #include <openssl/err.h>
- #include <openssl/pkcs12.h>
-+#include <openssl/rsa.h>
- #include <openssl/x509.h>
--#include <openssl/crypto.h>
- #ifndef OPENSSL_NO_EC
- #include <openssl/ec.h>
- #endif
---- a/src/openvpn/ssl_verify_openssl.c
-+++ b/src/openvpn/ssl_verify_openssl.c
-@@ -44,8 +44,9 @@
- #include "ssl_verify_backend.h"
- #include "openssl_compat.h"
- 
--#include <openssl/x509v3.h>
-+#include <openssl/bn.h>
- #include <openssl/err.h>
-+#include <openssl/x509v3.h>
- 
- int
- verify_callback(int preverify_ok, X509_STORE_CTX *ctx)
diff --git a/package/network/services/openvpn/patches/210-build_always_use_internal_lz4.patch b/package/network/services/openvpn/patches/210-build_always_use_internal_lz4.patch
index 5cf5174a9..a99f92364 100644
--- a/package/network/services/openvpn/patches/210-build_always_use_internal_lz4.patch
+++ b/package/network/services/openvpn/patches/210-build_always_use_internal_lz4.patch
@@ -1,6 +1,6 @@
 --- a/configure.ac
 +++ b/configure.ac
-@@ -1080,68 +1080,15 @@ dnl
+@@ -1077,68 +1077,15 @@ dnl
  AC_ARG_VAR([LZ4_CFLAGS], [C compiler flags for lz4])
  AC_ARG_VAR([LZ4_LIBS], [linker flags for lz4])
  if test "$enable_lz4" = "yes" && test "$enable_comp_stub" = "no"; then
diff --git a/package/network/services/openvpn/patches/220-disable_des.patch b/package/network/services/openvpn/patches/220-disable_des.patch
index 2b8f47a80..9ddf1047b 100644
--- a/package/network/services/openvpn/patches/220-disable_des.patch
+++ b/package/network/services/openvpn/patches/220-disable_des.patch
@@ -1,24 +1,17 @@
 --- a/src/openvpn/syshead.h
 +++ b/src/openvpn/syshead.h
-@@ -597,11 +597,11 @@ socket_defined(const socket_descriptor_t
+@@ -572,7 +572,7 @@ socket_defined(const socket_descriptor_t
  /*
   * Should we include NTLM proxy functionality
   */
--#if defined(ENABLE_CRYPTO)
 -#define NTLM 1
--#else
-+//#if defined(ENABLE_CRYPTO)
 +//#define NTLM 1
-+//#else
- #define NTLM 0
--#endif
-+//#endif
  
  /*
   * Should we include proxy digest auth functionality
 --- a/src/openvpn/crypto_mbedtls.c
 +++ b/src/openvpn/crypto_mbedtls.c
-@@ -319,6 +319,7 @@ int
+@@ -383,6 +383,7 @@ int
  key_des_num_cblocks(const mbedtls_cipher_info_t *kt)
  {
      int ret = 0;
@@ -26,7 +19,7 @@
      if (kt->type == MBEDTLS_CIPHER_DES_CBC)
      {
          ret = 1;
-@@ -331,6 +332,7 @@ key_des_num_cblocks(const mbedtls_cipher
+@@ -395,6 +396,7 @@ key_des_num_cblocks(const mbedtls_cipher
      {
          ret = 3;
      }
@@ -34,7 +27,7 @@
  
      dmsg(D_CRYPTO_DEBUG, "CRYPTO INFO: n_DES_cblocks=%d", ret);
      return ret;
-@@ -339,6 +341,7 @@ key_des_num_cblocks(const mbedtls_cipher
+@@ -403,6 +405,7 @@ key_des_num_cblocks(const mbedtls_cipher
  bool
  key_des_check(uint8_t *key, int key_len, int ndc)
  {
@@ -42,7 +35,7 @@
      int i;
      struct buffer b;
  
-@@ -367,11 +370,15 @@ key_des_check(uint8_t *key, int key_len,
+@@ -431,11 +434,15 @@ key_des_check(uint8_t *key, int key_len,
  
  err:
      return false;
@@ -58,7 +51,7 @@
      int i;
      struct buffer b;
  
-@@ -386,6 +393,7 @@ key_des_fixup(uint8_t *key, int key_len,
+@@ -450,6 +457,7 @@ key_des_fixup(uint8_t *key, int key_len,
          }
          mbedtls_des_key_set_parity(key);
      }
@@ -66,7 +59,7 @@
  }
  
  /*
-@@ -705,10 +713,12 @@ cipher_des_encrypt_ecb(const unsigned ch
+@@ -770,10 +778,12 @@ cipher_des_encrypt_ecb(const unsigned ch
                         unsigned char *src,
                         unsigned char *dst)
  {
diff --git a/package/network/services/openvpn/patches/221-tunnelblick-openvpn_xorpatch-a.diff b/package/network/services/openvpn/patches/221-tunnelblick-openvpn_xorpatch-a.diff
new file mode 100644
index 000000000..386f3fe48
--- /dev/null
+++ b/package/network/services/openvpn/patches/221-tunnelblick-openvpn_xorpatch-a.diff
@@ -0,0 +1,27 @@
+diff -u -r -x .DS_Store openvpn-2.5_beta1.old/src/openvpn/forward.c openvpn-2.5_beta1.new/src/openvpn/forward.c
+--- openvpn-2.5_beta1.old/src/openvpn/forward.c	2020-08-16 11:57:15.000000000 -0400
++++ openvpn-2.5_beta1.new/src/openvpn/forward.c	2020-08-16 11:57:15.000000000 -0400
+@@ -811,7 +811,10 @@
+ 
+     status = link_socket_read(c->c2.link_socket,
+                               &c->c2.buf,
+-                              &c->c2.from);
++			                  &c->c2.from,
++			                  c->options.ce.xormethod,
++			                  c->options.ce.xormask,
++			                  c->options.ce.xormasklen);
+ 
+     if (socket_connection_reset(c->c2.link_socket, status))
+     {
+@@ -1621,7 +1624,10 @@
+                 /* Send packet */
+                 size = link_socket_write(c->c2.link_socket,
+                                          &c->c2.to_link,
+-                                         to_addr);
++                                         to_addr,
++				                         c->options.ce.xormethod,
++				                         c->options.ce.xormask,
++				                         c->options.ce.xormasklen);
+ 
+                 /* Undo effect of prepend */
+                 link_socket_write_post_size_adjust(&size, size_delta, &c->c2.to_link);
diff --git a/package/network/services/openvpn/patches/222-tunnelblick-openvpn_xorpatch-b.diff b/package/network/services/openvpn/patches/222-tunnelblick-openvpn_xorpatch-b.diff
new file mode 100644
index 000000000..99e6b63bf
--- /dev/null
+++ b/package/network/services/openvpn/patches/222-tunnelblick-openvpn_xorpatch-b.diff
@@ -0,0 +1,80 @@
+diff -u -r -x .DS_Store openvpn-2.5_rc3.old/src/openvpn/options.c openvpn-2.5_rc3.new/src/openvpn/options.c
+--- openvpn-2.5_rc3.old/src/openvpn/options.c	2020-10-19 13:38:17.000000000 -0400
++++ openvpn-2.5_rc3.new/src/openvpn/options.c	2020-10-19 13:38:17.000000000 -0400
+@@ -821,6 +821,9 @@
+     o->resolve_retry_seconds = RESOLV_RETRY_INFINITE;
+     o->resolve_in_advance = false;
+     o->proto_force = -1;
++    o->ce.xormethod = 0;
++    o->ce.xormask = "\0";
++    o->ce.xormasklen = 0;
+     o->occ = true;
+ #ifdef ENABLE_MANAGEMENT
+     o->management_log_history_cache = 250;
+@@ -973,6 +976,9 @@
+     setenv_str_i(es, "local_port", e->local_port, i);
+     setenv_str_i(es, "remote", e->remote, i);
+     setenv_str_i(es, "remote_port", e->remote_port, i);
++    setenv_int_i(es, "xormethod", e->xormethod, i);
++    setenv_str_i(es, "xormask", e->xormask, i);
++    setenv_int_i(es, "xormasklen", e->xormasklen, i);
+ 
+     if (e->http_proxy_options)
+     {
+@@ -1452,6 +1458,9 @@
+     SHOW_BOOL(bind_ipv6_only);
+     SHOW_INT(connect_retry_seconds);
+     SHOW_INT(connect_timeout);
++    SHOW_INT (xormethod);
++    SHOW_STR (xormask);
++    SHOW_INT (xormasklen);
+ 
+     if (o->http_proxy_options)
+     {
+@@ -6260,6 +6269,46 @@
+         }
+         options->proto_force = proto_force;
+     }
++    else if (streq (p[0], "scramble") && p[1])
++    {
++        VERIFY_PERMISSION (OPT_P_GENERAL|OPT_P_CONNECTION);
++        if (streq (p[1], "xormask") && p[2] && (!p[3]))
++        {
++            options->ce.xormethod = 1;
++            options->ce.xormask = p[2];
++            options->ce.xormasklen = strlen(options->ce.xormask);
++        }
++        else if (streq (p[1], "xorptrpos") && (!p[2]))
++        {
++            options->ce.xormethod = 2;
++            options->ce.xormask = NULL;
++            options->ce.xormasklen = 0;
++        }
++        else if (streq (p[1], "reverse") && (!p[2]))
++        {
++            options->ce.xormethod = 3;
++            options->ce.xormask = NULL;
++            options->ce.xormasklen = 0;
++        }
++        else if (streq (p[1], "obfuscate") && p[2] && (!p[3]))
++        {
++            options->ce.xormethod = 4;
++            options->ce.xormask = p[2];
++            options->ce.xormasklen = strlen(options->ce.xormask);
++        }
++        else if (!p[2])
++        {
++            msg (M_WARN, "WARNING: No recognized 'scramble' method specified; using 'scramble xormask \"%s\"'", p[1]);
++            options->ce.xormethod = 1;
++            options->ce.xormask = p[1];
++            options->ce.xormasklen = strlen(options->ce.xormask);
++        }
++        else
++        {
++            msg (msglevel, "No recognized 'scramble' method specified or extra parameters for 'scramble'");
++            goto err;
++        }
++    }
+     else if (streq(p[0], "http-proxy") && p[1] && !p[5])
+     {
+         struct http_proxy_options *ho;
diff --git a/package/network/services/openvpn/patches/223-tunnelblick-openvpn_xorpatch-c.diff b/package/network/services/openvpn/patches/223-tunnelblick-openvpn_xorpatch-c.diff
new file mode 100644
index 000000000..179971b3f
--- /dev/null
+++ b/package/network/services/openvpn/patches/223-tunnelblick-openvpn_xorpatch-c.diff
@@ -0,0 +1,13 @@
+diff -u -r -x .DS_Store openvpn-2.5_git_57d6f10.old/src/openvpn/options.h openvpn-2.5_git_57d6f10.new/src/openvpn/options.h
+--- openvpn-2.5_git_57d6f10.old/src/openvpn/options.h	2018-07-28 06:02:27.000000000 -0400
++++ openvpn-2.5_git_57d6f10.new/src/openvpn/options.h	2018-07-28 06:02:27.000000000 -0400
+@@ -99,6 +99,9 @@
+     int connect_retry_seconds;
+     int connect_retry_seconds_max;
+     int connect_timeout;
++    int xormethod;
++    const char *xormask;
++    int xormasklen;
+     struct http_proxy_options *http_proxy_options;
+     const char *socks_proxy_server;
+     const char *socks_proxy_port;
diff --git a/package/network/services/openvpn/patches/224-tunnelblick-openvpn_xorpatch-d.diff b/package/network/services/openvpn/patches/224-tunnelblick-openvpn_xorpatch-d.diff
new file mode 100644
index 000000000..8cc49af16
--- /dev/null
+++ b/package/network/services/openvpn/patches/224-tunnelblick-openvpn_xorpatch-d.diff
@@ -0,0 +1,59 @@
+--- openvpn-2.5_git_974513e/src/openvpn/socket.c	2017-08-17 11:27:23.000000000 -0400
++++ openvpn-2.5_git_974513e_patched/src/openvpn/socket.c	2017-08-18 18:37:11.000000000 -0400
+@@ -54,6 +54,56 @@
+     IPv6_TCP_HEADER_SIZE,
+ };
+
++int buffer_mask(struct buffer *buf, const char *mask, int xormasklen)
++{
++    int i;
++    uint8_t *b;
++    if (  xormasklen > 0  ) {
++        for (i = 0, b = BPTR (buf); i < BLEN(buf); i++, b++) {
++            *b = *b ^ mask[i % xormasklen];
++        }
++    }
++    return BLEN (buf);
++}
++
++int buffer_xorptrpos(struct buffer *buf)
++{
++    int i;
++    uint8_t *b;
++    for (i = 0, b = BPTR (buf); i < BLEN(buf); i++, b++) {
++        *b = *b ^ i+1;
++    }
++    return BLEN (buf);
++}
++
++int buffer_reverse(struct buffer *buf)
++{
++/* This function has been rewritten for Tunnelblick. The buffer_reverse function at
++ * https://github.com/clayface/openvpn_xorpatch
++ * makes a copy of the buffer and it writes to the byte **after** the
++ * buffer contents, so if the buffer is full then it writes outside of the buffer.
++ * This rewritten version does neither.
++ *
++ * For interoperability, this rewritten version preserves the behavior of the original
++ * function: it does not modify the first character of the buffer. So it does not
++ * actually reverse the contents of the buffer. Instead, it changes 'abcde' to 'aedcb'.
++ * (Of course, the actual buffer contents are bytes, and not necessarily characters.)
++ */
++    int len = BLEN(buf);
++    if (  len > 2  ) {                           /* Leave '', 'a', and 'ab' alone */
++        int i;
++        uint8_t *b_start = BPTR (buf) + 1;            /* point to first byte to swap */
++        uint8_t *b_end   = BPTR (buf) + (len - 1); /* point to last byte to swap */
++        uint8_t tmp;
++        for (i = 0; i < (len-1)/2; i++, b_start++, b_end--) {
++            tmp = *b_start;
++            *b_start = *b_end;
++            *b_end = tmp;
++        }
++    }
++    return len;
++}
++
+ /*
+  * Convert sockflags/getaddr_flags into getaddr_flags
+  */
diff --git a/package/network/services/openvpn/patches/225-tunnelblick-openvpn_xorpatch-e.diff b/package/network/services/openvpn/patches/225-tunnelblick-openvpn_xorpatch-e.diff
new file mode 100644
index 000000000..b8148304e
--- /dev/null
+++ b/package/network/services/openvpn/patches/225-tunnelblick-openvpn_xorpatch-e.diff
@@ -0,0 +1,114 @@
+Only in openvpn-2.5_git_57d6f10.old/src/openvpn: socket.c.orig
+Only in openvpn-2.5_git_19d6d9c.old/src/openvpn: socket.c.orig
+Only in openvpn-2.5_beta1.old/src/openvpn: socket.c.orig
+diff -u -r -x .DS_Store openvpn-2.5_beta1.old/src/openvpn/socket.h openvpn-2.5_beta1.new/src/openvpn/socket.h
+--- openvpn-2.5_beta1.old/src/openvpn/socket.h	2020-08-16 11:57:17.000000000 -0400
++++ openvpn-2.5_beta1.new/src/openvpn/socket.h	2020-08-16 11:57:17.000000000 -0400
+@@ -249,6 +249,10 @@
+ #endif
+ };
+ 
++int buffer_mask(struct buffer *buf, const char *xormask, int xormasklen);
++int buffer_xorptrpos(struct buffer *buf);
++int buffer_reverse(struct buffer *buf);
++
+ /*
+  * Some Posix/Win32 differences.
+  */
+@@ -1049,30 +1053,56 @@
+ static inline int
+ link_socket_read(struct link_socket *sock,
+                  struct buffer *buf,
+-                 struct link_socket_actual *from)
++                 struct link_socket_actual *from,
++                 int xormethod,
++                 const char *xormask,
++                 int xormasklen)
+ {
++    int res;
+     if (proto_is_udp(sock->info.proto)) /* unified UDPv4 and UDPv6 */
+     {
+-        int res;
+ 
+ #ifdef _WIN32
+         res = link_socket_read_udp_win32(sock, buf, from);
+ #else
+         res = link_socket_read_udp_posix(sock, buf, from);
+ #endif
+-        return res;
+     }
+     else if (proto_is_tcp(sock->info.proto)) /* unified TCPv4 and TCPv6 */
+     {
+         /* from address was returned by accept */
+         addr_copy_sa(&from->dest, &sock->info.lsa->actual.dest);
+-        return link_socket_read_tcp(sock, buf);
++        res = link_socket_read_tcp(sock, buf);
+     }
+     else
+     {
+         ASSERT(0);
+         return -1; /* NOTREACHED */
+     }
++    switch(xormethod)
++    {
++        case 0:
++            break;
++        case 1:
++            buffer_mask(buf,xormask,xormasklen);
++            break;
++        case 2:
++            buffer_xorptrpos(buf);
++            break;
++        case 3:
++            buffer_reverse(buf);
++            break;
++        case 4:
++            buffer_mask(buf,xormask,xormasklen);
++            buffer_xorptrpos(buf);
++            buffer_reverse(buf);
++            buffer_xorptrpos(buf);
++            break;
++        default:
++            ASSERT (0);
++            return -1; /* NOTREACHED */
++    }
++    return res;
+ }
+ 
+ /*
+@@ -1163,8 +1193,34 @@
+ static inline int
+ link_socket_write(struct link_socket *sock,
+                   struct buffer *buf,
+-                  struct link_socket_actual *to)
++                  struct link_socket_actual *to,
++                  int xormethod,
++                  const char *xormask,
++                  int xormasklen)
+ {
++    switch(xormethod)
++    {
++        case 0:
++            break;
++        case 1:
++            buffer_mask(buf,xormask,xormasklen);
++            break;
++        case 2:
++            buffer_xorptrpos(buf);
++            break;
++        case 3:
++            buffer_reverse(buf);
++            break;
++        case 4:
++            buffer_xorptrpos(buf);
++            buffer_reverse(buf);
++            buffer_xorptrpos(buf);
++            buffer_mask(buf,xormask,xormasklen);
++            break;
++        default:
++            ASSERT (0);
++            return -1; /* NOTREACHED */
++    }
+     if (proto_is_udp(sock->info.proto)) /* unified UDPv4 and UDPv6 */
+     {
+         return link_socket_write_udp(sock, buf, to);