298977887/lede
1
0
Fork 0
mirror of https://github.com/coolsnowwolf/lede.git synced 2025-04-14 11:13:29 +00:00
Code Issues Packages Projects Releases Wiki Activity

filogic: improve HUASIFEI WH3000 support

Browse Source
This commit is contained in:
coolsnowwolf 2025-04-06 23:08:21 +08:00
parent 8c11125e5e
commit b50369007d
3 changed files with 72 additions and 47 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

107
target/linux/mediatek/dts/mt7981b-huasifei-wh3000-emmc.dts
View File

@ -1,4 +1,4 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
@ -43,38 +43,21 @@
};
};
leds {
gpio-leds {
compatible = "gpio-leds";
led_sys_red: led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_STATUS;
gpios = <&pio 11 GPIO_ACTIVE_LOW>;
};
led_sys_green: led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
};
};
usb_vbus: regulator-usb {
compatible = "regulator-fixed";
regulator-name = "usb-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
regulator-boot-on;
};
};
&uart0 {
status = "okay";
};
&watchdog {
status = "okay";
};
&eth {
@ -87,6 +70,9 @@
reg = <0>;
phy-mode = "2500base-x";
phy-handle = <&phy1>;
nvmem-cells = <&macaddr_factory_4 2>;
nvmem-cell-names = "mac-address";
};
gmac1: mac@1 {
@ -94,11 +80,14 @@
reg = <1>;
phy-mode = "gmii";
phy-handle = <&int_gbe_phy>;
nvmem-cells = <&macaddr_factory_4 3>;
nvmem-cell-names = "mac-address";
};
};
&mdio_bus {
phy1: phy@1 {
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <1>;
reset-assert-us = <100000>;
@ -110,6 +99,49 @@
};
};
&mmc0 {
bus-width = <8>;
cap-mmc-highspeed;
max-frequency = <52000000>;
non-removable;
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-1 = <&mmc0_pins_uhs>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
card@0 {
compatible = "mmc-card";
reg = <0>;
block {
compatible = "block-device";
partitions {
block-partition-factory {
partname = "factory";
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x1000>;
};
macaddr_factory_4: macaddr@4 {
compatible = "mac-base";
reg = <0x4 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
};
};
};
};
&pio {
mmc0_pins_default: mmc0-pins-default {
mux {
@ -125,27 +157,24 @@
};
};
&uart0 {
status = "okay";
};
&usb_phy {
status = "okay";
};
&watchdog {
status = "okay";
};
&wifi {
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
status = "okay";
};
&xhci {
status = "okay";
vbus-supply = <&usb_vbus>;
};
&wifi {
status = "okay";
};
&mmc0 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-1 = <&mmc0_pins_uhs>;
bus-width = <8>;
cap-mmc-highspeed;
max-frequency = <52000000>;
vmmc-supply = <&reg_3p3v>;
non-removable;
status = "okay";
};

5
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
View File

@ -128,11 +128,6 @@ mediatek_setup_macs()
lan_mac=$(macaddr_add "$wan_mac" 1)
label_mac=$wan_mac
;;
huasifei,wh3000-emmc)
label_mac=$(mmc_get_mac_binary factory 0x4)
lan_mac="$(macaddr_add $label_mac 2)"
wan_mac="$(macaddr_add $label_mac 3)"
;;
imou,lc-hx3001)
lan_mac=$(mtd_get_mac_ascii u-boot-env mac)
wan_mac=$(macaddr_add "$lan_mac" 2)

7
target/linux/mediatek/image/filogic.mk
View File

@ -351,7 +351,7 @@ define Device/cmcc_xr30-nand
DEVICE_VARIANT := (U-Boot mod)
DEVICE_DTS := mt7981b-cmcc-xr30-nand
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
@ -499,6 +499,7 @@ define Device/huasifei_wh3000-emmc
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
SUPPORTED_DEVICES += huasifei,wh3000
endef
TARGET_DEVICES += huasifei_wh3000-emmc
@ -508,11 +509,11 @@ define Device/hf_m7986r1-emmc
DEVICE_DTS := mt7986a-hf-m7986r1-emmc
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-usb3 kmod-mt7921e kmod-usb-net-rndis kmod-usb-serial-option f2fsck mkf2fs
SUPPORTED_DEVICES += HF-M7986R1
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
SUPPORTED_DEVICES += HF-M7986R1
endef
TARGET_DEVICES += hf_m7986r1-emmc
@ -526,8 +527,8 @@ define Device/hf_m7986r1-nand
PAGESIZE := 2048
KERNEL_IN_UBI := 1
DEVICE_PACKAGES := kmod-usb3 kmod-mt7921e kmod-usb-net-rndis kmod-usb-serial-option
SUPPORTED_DEVICES += HF-M7986R1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
SUPPORTED_DEVICES += HF-M7986R1
endef
TARGET_DEVICES += hf_m7986r1-nand